2019-11-12 10:00:14

by Adrian Reber

[permalink] [raw]
Subject: [PATCH v4] selftests: add tests for clone3()

This adds tests for clone3() with different values and sizes
of struct clone_args.

This selftest was initially part of of the clone3() with PID selftest.
After that patch was almost merged Eugene sent out a couple of patches
to fix problems with these test.

This commit now only contains the clone3() selftest after the LPC
decision to rework clone3() with PID to allow setting the PID in
multiple PID namespaces including all of Eugene's patches.

Signed-off-by: Eugene Syromiatnikov <[email protected]>
Signed-off-by: Adrian Reber <[email protected]>
---
v2:
- Applied Christian's suggestions
- Skip root-only tests when running as non-root
v3:
- Removed unnecessary test case (everything set to 1)
- Correctly handle children without SIGCHLD
v4:
- Small cosmetic fixes
- Added two more tests with different sizes
---
MAINTAINERS | 1 +
tools/testing/selftests/Makefile | 1 +
tools/testing/selftests/clone3/.gitignore | 1 +
tools/testing/selftests/clone3/Makefile | 7 +
tools/testing/selftests/clone3/clone3.c | 205 ++++++++++++++++++++++
5 files changed, 215 insertions(+)
create mode 100644 tools/testing/selftests/clone3/.gitignore
create mode 100644 tools/testing/selftests/clone3/Makefile
create mode 100644 tools/testing/selftests/clone3/clone3.c

diff --git a/MAINTAINERS b/MAINTAINERS
index eb19fad370d7..4f4988fbe7b7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12833,6 +12833,7 @@ S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux.git
F: samples/pidfd/
F: tools/testing/selftests/pidfd/
+F: tools/testing/selftests/clone3/
K: (?i)pidfd
K: (?i)clone3
K: \b(clone_args|kernel_clone_args)\b
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index 4cdbae6f4e61..ad442364218a 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -4,6 +4,7 @@ TARGETS += bpf
TARGETS += breakpoints
TARGETS += capabilities
TARGETS += cgroup
+TARGETS += clone3
TARGETS += cpufreq
TARGETS += cpu-hotplug
TARGETS += drivers/dma-buf
diff --git a/tools/testing/selftests/clone3/.gitignore b/tools/testing/selftests/clone3/.gitignore
new file mode 100644
index 000000000000..85d9d3ba2524
--- /dev/null
+++ b/tools/testing/selftests/clone3/.gitignore
@@ -0,0 +1 @@
+clone3
diff --git a/tools/testing/selftests/clone3/Makefile b/tools/testing/selftests/clone3/Makefile
new file mode 100644
index 000000000000..ea922c014ae4
--- /dev/null
+++ b/tools/testing/selftests/clone3/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+
+CFLAGS += -I../../../../usr/include/
+
+TEST_GEN_PROGS := clone3
+
+include ../lib.mk
diff --git a/tools/testing/selftests/clone3/clone3.c b/tools/testing/selftests/clone3/clone3.c
new file mode 100644
index 000000000000..0f8a9ef40117
--- /dev/null
+++ b/tools/testing/selftests/clone3/clone3.c
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* Based on Christian Brauner's clone3() example */
+
+#define _GNU_SOURCE
+#include <errno.h>
+#include <inttypes.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/syscall.h>
+#include <sys/types.h>
+#include <sys/un.h>
+#include <sys/wait.h>
+#include <unistd.h>
+#include <sched.h>
+
+#include "../kselftest.h"
+
+/*
+ * Different sizes of struct clone_args
+ */
+#ifndef CLONE3_ARGS_SIZE_V0
+#define CLONE3_ARGS_SIZE_V0 64
+#endif
+
+enum test_mode {
+ CLONE3_ARGS_NO_TEST,
+ CLONE3_ARGS_ALL_0,
+ CLONE3_ARGS_INVAL_EXIT_SIGNAL_BIG,
+ CLONE3_ARGS_INVAL_EXIT_SIGNAL_NEG,
+ CLONE3_ARGS_INVAL_EXIT_SIGNAL_CSIG,
+ CLONE3_ARGS_INVAL_EXIT_SIGNAL_NSIG,
+};
+
+static pid_t raw_clone(struct clone_args *args, size_t size)
+{
+ return syscall(__NR_clone3, args, size);
+}
+
+static int call_clone3(uint64_t flags, size_t size, enum test_mode test_mode)
+{
+ struct clone_args args = {
+ .flags = flags,
+ .exit_signal = SIGCHLD,
+ };
+
+ struct clone_args_extended {
+ struct clone_args args;
+ __aligned_u64 excess_space[2];
+ } args_ext;
+
+ pid_t pid = -1;
+ int status;
+
+ memset(&args_ext, 0, sizeof(args_ext));
+ if (size > sizeof(struct clone_args))
+ args_ext.excess_space[1] = 1;
+
+ if (size == 0)
+ size = sizeof(struct clone_args);
+
+ switch (test_mode) {
+ case CLONE3_ARGS_ALL_0:
+ args.flags = 0;
+ args.exit_signal = 0;
+ break;
+ case CLONE3_ARGS_INVAL_EXIT_SIGNAL_BIG:
+ args.exit_signal = 0xbadc0ded00000000ULL;
+ break;
+ case CLONE3_ARGS_INVAL_EXIT_SIGNAL_NEG:
+ args.exit_signal = 0x0000000080000000ULL;
+ break;
+ case CLONE3_ARGS_INVAL_EXIT_SIGNAL_CSIG:
+ args.exit_signal = 0x0000000000000100ULL;
+ break;
+ case CLONE3_ARGS_INVAL_EXIT_SIGNAL_NSIG:
+ args.exit_signal = 0x00000000000000f0ULL;
+ break;
+ }
+
+ memcpy(&args_ext.args, &args, sizeof(struct clone_args));
+
+ pid = raw_clone((struct clone_args *)&args_ext, size);
+ if (pid < 0) {
+ ksft_print_msg("%s - Failed to create new process\n",
+ strerror(errno));
+ return -errno;
+ }
+
+ if (pid == 0) {
+ ksft_print_msg("I am the child, my PID is %d\n", getpid());
+ _exit(EXIT_SUCCESS);
+ }
+
+ ksft_print_msg("I am the parent (%d). My child's pid is %d\n",
+ getpid(), pid);
+
+ if (waitpid(-1, &status, __WALL) < 0) {
+ ksft_print_msg("Child returned %s\n", strerror(errno));
+ return -errno;
+ }
+ if (WEXITSTATUS(status))
+ return WEXITSTATUS(status);
+
+ return 0;
+}
+
+static void test_clone3(uint64_t flags, size_t size, int expected,
+ enum test_mode test_mode)
+{
+ int ret;
+
+ ksft_print_msg(
+ "[%d] Trying clone3() with flags %#" PRIx64 " (size %zu)\n",
+ getpid(), flags, size);
+ ret = call_clone3(flags, size, test_mode);
+ ksft_print_msg("[%d] clone3() with flags says: %d expected %d\n",
+ getpid(), ret, expected);
+ if (ret != expected)
+ ksft_test_result_fail(
+ "[%d] Result (%d) is different than expected (%d)\n",
+ getpid(), ret, expected);
+ else
+ ksft_test_result_pass(
+ "[%d] Result (%d) matches expectation (%d)\n",
+ getpid(), ret, expected);
+}
+
+int main(int argc, char *argv[])
+{
+ pid_t pid;
+
+ uid_t uid = getuid();
+
+ ksft_print_header();
+ ksft_set_plan(17);
+
+ /* Just a simple clone3() should return 0.*/
+ test_clone3(0, 0, 0, CLONE3_ARGS_NO_TEST);
+
+ /* Do a clone3() in a new PID NS.*/
+ if (uid == 0)
+ test_clone3(CLONE_NEWPID, 0, 0, CLONE3_ARGS_NO_TEST);
+ else
+ ksft_test_result_skip("Skipping clone3() with CLONE_NEWPID\n");
+
+ /* Do a clone3() with CLONE3_ARGS_SIZE_V0. */
+ test_clone3(0, CLONE3_ARGS_SIZE_V0, 0, CLONE3_ARGS_NO_TEST);
+
+ /* Do a clone3() with CLONE3_ARGS_SIZE_V0 - 8 */
+ test_clone3(0, CLONE3_ARGS_SIZE_V0 - 8, -EINVAL, CLONE3_ARGS_NO_TEST);
+
+ /* Do a clone3() with sizeof(struct clone_args) + 8 */
+ test_clone3(0, sizeof(struct clone_args) + 8, 0, CLONE3_ARGS_NO_TEST);
+
+ /* Do a clone3() with exit_signal having highest 32 bits non-zero */
+ test_clone3(0, 0, -EINVAL, CLONE3_ARGS_INVAL_EXIT_SIGNAL_BIG);
+
+ /* Do a clone3() with negative 32-bit exit_signal */
+ test_clone3(0, 0, -EINVAL, CLONE3_ARGS_INVAL_EXIT_SIGNAL_NEG);
+
+ /* Do a clone3() with exit_signal not fitting into CSIGNAL mask */
+ test_clone3(0, 0, -EINVAL, CLONE3_ARGS_INVAL_EXIT_SIGNAL_CSIG);
+
+ /* Do a clone3() with NSIG < exit_signal < CSIG */
+ test_clone3(0, 0, -EINVAL, CLONE3_ARGS_INVAL_EXIT_SIGNAL_NSIG);
+
+ test_clone3(0, sizeof(struct clone_args) + 8, 0, CLONE3_ARGS_ALL_0);
+
+ test_clone3(0, sizeof(struct clone_args) + 16, -E2BIG,
+ CLONE3_ARGS_ALL_0);
+
+ test_clone3(0, sizeof(struct clone_args) * 2, -E2BIG,
+ CLONE3_ARGS_ALL_0);
+
+ /* Do a clone3() with > page size */
+ test_clone3(0, getpagesize() + 8, -E2BIG, CLONE3_ARGS_NO_TEST);
+
+ /* Do a clone3() with CLONE3_ARGS_SIZE_V0 in a new PID NS. */
+ if (uid == 0)
+ test_clone3(CLONE_NEWPID, CLONE3_ARGS_SIZE_V0, 0,
+ CLONE3_ARGS_NO_TEST);
+ else
+ ksft_test_result_skip("Skipping clone3() with CLONE_NEWPID\n");
+
+ /* Do a clone3() with CLONE3_ARGS_SIZE_V0 - 8 in a new PID NS */
+ test_clone3(CLONE_NEWPID, CLONE3_ARGS_SIZE_V0 - 8, -EINVAL,
+ CLONE3_ARGS_NO_TEST);
+
+ /* Do a clone3() with sizeof(struct clone_args) + 8 in a new PID NS */
+ if (uid == 0)
+ test_clone3(CLONE_NEWPID, sizeof(struct clone_args) + 8, 0,
+ CLONE3_ARGS_NO_TEST);
+ else
+ ksft_test_result_skip("Skipping clone3() with CLONE_NEWPID\n");
+
+ /* Do a clone3() with > page size in a new PID NS */
+ test_clone3(CLONE_NEWPID, getpagesize() + 8, -E2BIG,
+ CLONE3_ARGS_NO_TEST);
+
+ return !ksft_get_fail_cnt() ? ksft_exit_pass() : ksft_exit_fail();
+}
--
2.23.0


2019-11-12 10:29:45

by Christian Brauner

[permalink] [raw]
Subject: Re: [PATCH v4] selftests: add tests for clone3()

On Tue, Nov 12, 2019 at 10:58:51AM +0100, Adrian Reber wrote:
> This adds tests for clone3() with different values and sizes
> of struct clone_args.
>
> This selftest was initially part of of the clone3() with PID selftest.
> After that patch was almost merged Eugene sent out a couple of patches
> to fix problems with these test.
>
> This commit now only contains the clone3() selftest after the LPC
> decision to rework clone3() with PID to allow setting the PID in
> multiple PID namespaces including all of Eugene's patches.
>
> Signed-off-by: Eugene Syromiatnikov <[email protected]>
> Signed-off-by: Adrian Reber <[email protected]>

Queuing up for 5.5.
Thanks, Adrian!

Reviewed-by: Christian Brauner <[email protected]>

2019-11-12 10:47:22

by Christian Brauner

[permalink] [raw]
Subject: Re: [PATCH v4] selftests: add tests for clone3()

On Tue, Nov 12, 2019 at 11:28:14AM +0100, Christian Brauner wrote:
> On Tue, Nov 12, 2019 at 10:58:51AM +0100, Adrian Reber wrote:
> > This adds tests for clone3() with different values and sizes
> > of struct clone_args.
> >
> > This selftest was initially part of of the clone3() with PID selftest.
> > After that patch was almost merged Eugene sent out a couple of patches
> > to fix problems with these test.
> >
> > This commit now only contains the clone3() selftest after the LPC
> > decision to rework clone3() with PID to allow setting the PID in
> > multiple PID namespaces including all of Eugene's patches.
> >
> > Signed-off-by: Eugene Syromiatnikov <[email protected]>
> > Signed-off-by: Adrian Reber <[email protected]>
>
> Queuing up for 5.5.
> Thanks, Adrian!
>
> Reviewed-by: Christian Brauner <[email protected]>

One thing, can you tell me what the base tree for your commit is,
please? Given that this is just one commit it should be enough if you
give me the "base-commit" line from the end of the patch created via:
git format-patch --base=HEAD~1 HEAD~1

Thanks!
Christian

2019-11-12 11:12:12

by Christian Brauner

[permalink] [raw]
Subject: Re: [PATCH v4] selftests: add tests for clone3()

On Tue, Nov 12, 2019 at 11:45:05AM +0100, Christian Brauner wrote:
> On Tue, Nov 12, 2019 at 11:28:14AM +0100, Christian Brauner wrote:
> > On Tue, Nov 12, 2019 at 10:58:51AM +0100, Adrian Reber wrote:
> > > This adds tests for clone3() with different values and sizes
> > > of struct clone_args.
> > >
> > > This selftest was initially part of of the clone3() with PID selftest.
> > > After that patch was almost merged Eugene sent out a couple of patches
> > > to fix problems with these test.
> > >
> > > This commit now only contains the clone3() selftest after the LPC
> > > decision to rework clone3() with PID to allow setting the PID in
> > > multiple PID namespaces including all of Eugene's patches.
> > >
> > > Signed-off-by: Eugene Syromiatnikov <[email protected]>
> > > Signed-off-by: Adrian Reber <[email protected]>
> >
> > Queuing up for 5.5.
> > Thanks, Adrian!
> >
> > Reviewed-by: Christian Brauner <[email protected]>
>
> One thing, can you tell me what the base tree for your commit is,
> please? Given that this is just one commit it should be enough if you
> give me the "base-commit" line from the end of the patch created via:
> git format-patch --base=HEAD~1 HEAD~1

Ok, merge base commit seems to have been v5.4-rc7. I've resolved a minor
merge conflict (cf. [2]) when applying this commit to [1].

Christian

[1]: https://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux.git/log/?h=pidfd
[2]:

diff --cc tools/testing/selftests/clone3/.gitignore
index 6c9f98097774,85d9d3ba2524..000000000000
--- a/tools/testing/selftests/clone3/.gitignore
+++ b/tools/testing/selftests/clone3/.gitignore
@@@ -1,1 -1,1 +1,2 @@@
+ clone3
+clone3_clear_sighand
diff --cc tools/testing/selftests/clone3/Makefile
index e6f259321e16,ea922c014ae4..000000000000
--- a/tools/testing/selftests/clone3/Makefile
+++ b/tools/testing/selftests/clone3/Makefile
@@@ -1,6 -1,7 +1,6 @@@
- # SPDX-License-Identifier: GPL-2.0-only
+ # SPDX-License-Identifier: GPL-2.0
+CFLAGS += -g -I../../../../usr/include/

- TEST_GEN_PROGS := clone3_clear_sighand
-CFLAGS += -I../../../../usr/include/
-
-TEST_GEN_PROGS := clone3
++TEST_GEN_PROGS := clone3 clone3_clear_sighand

include ../lib.mk