Do you see the following error while running selftests netfilter
nft_nat.sh test ?
Are we missing any kernel config fragments ? We are merging configs
from the directory.
# selftests netfilter nft_nat.sh
netfilter: nft_nat.sh_ #
# Cannot create namespace file \"/var/run/netns/ns1\" File exists
create: namespace_file #
# internal00-0 Error Could not open file \"-\" No such file or directory
Error: Could_not #
#
: _ #
#
: _ #
# internal00-0 Error Could not open file \"-\" No such file or directory
Error: Could_not #
#
: _ #
#
: _ #
# internal00-0 Error Could not open file \"-\" No such file or directory
Error: Could_not #
#
: _ #
#
: _ #
# <cmdline>16-12 Error syntax error, unexpected counter
Error: syntax_error, #
# list counter inet filter ns0in
counter: inet_filter #
# ^^^^^^^
: _ #
# ERROR ns0in counter in ns1 has unexpected value (expected packets 1 bytes 84)
ns0in: counter_in #
# <cmdline>16-12 Error syntax error, unexpected counter
Error: syntax_error, #
# list counter inet filter ns0in
counter: inet_filter #
# ^^^^^^^
: _ #
# <cmdline>16-12 Error syntax error, unexpected counter
Full test log:
https://lkft.validation.linaro.org/scheduler/job/1021542#L14602
https://qa-reports.linaro.org/lkft/linux-next-oe/build/next-20191125/testrun/1021542/log
Dashboard link,
https://qa-reports.linaro.org/lkft/linux-mainline-oe/tests/kselftest/netfilter_nft_nat.sh
https://qa-reports.linaro.org/lkft/linux-next-oe/tests/kselftest/netfilter_nft_nat.sh
metadata:
git branch: master
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
git commit: c165016bac2719e05794c216f9b6da730d68d1e3
git describe: next-20191125
make_kernelversion: 5.4.0-rc8
kernel-config:
http://snapshots.linaro.org/openembedded/lkft/lkft/sumo/hikey/lkft/linux-next/653/config
build-location:
http://snapshots.linaro.org/openembedded/lkft/lkft/sumo/hikey/lkft/linux-next/653
Best regards
Naresh Kamboju
Naresh Kamboju <[email protected]> wrote:
> Do you see the following error while running selftests netfilter
> nft_nat.sh test ?
> Are we missing any kernel config fragments ? We are merging configs
> from the directory.
>
> # selftests netfilter nft_nat.sh
> netfilter: nft_nat.sh_ #
> # Cannot create namespace file \"/var/run/netns/ns1\" File exists
'ns1' is not a good name.
What is the output of nft --version?
Does this patch help? Even if it doesn't, its probably a good idea
to add it.
Subject: [PATCH] selftests: netfilter: use randomized netns names
Using ns0, ns1, etc. isn't a good idea, they might already exist.
Add a random suffix to avoid interering with other, unrelated net namespaces.
Signed-off-by: Florian Westphal <[email protected]>
---
tools/testing/selftests/netfilter/nft_nat.sh | 332 ++++++++++---------
1 file changed, 176 insertions(+), 156 deletions(-)
diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/netfilter/nft_nat.sh
index 1be55e705780..41c7ea251b7f 100755
--- a/tools/testing/selftests/netfilter/nft_nat.sh
+++ b/tools/testing/selftests/netfilter/nft_nat.sh
@@ -8,9 +8,14 @@ ksft_skip=4
ret=0
test_inet_nat=true
+sfx=$(mktemp -u "XXXXXXXX")
+ns0="ns0-$sfx"
+ns1="ns1-$sfx"
+ns2="ns2-$sfx"
+
cleanup()
{
- for i in 0 1 2; do ip netns del ns$i;done
+ for i in 0 1 2; do ip netns del ns$i-"$sfx";done
}
nft --version > /dev/null 2>&1
@@ -25,40 +30,49 @@ if [ $? -ne 0 ];then
exit $ksft_skip
fi
-ip netns add ns0
+ip netns add "$ns0"
if [ $? -ne 0 ];then
- echo "SKIP: Could not create net namespace"
+ echo "SKIP: Could not create net namespace $ns0"
exit $ksft_skip
fi
trap cleanup EXIT
-ip netns add ns1
-ip netns add ns2
+ip netns add "$ns1"
+if [ $? -ne 0 ];then
+ echo "SKIP: Could not create net namespace $ns1"
+ exit $ksft_skip
+fi
+
+ip netns add "$ns2"
+if [ $? -ne 0 ];then
+ echo "SKIP: Could not create net namespace $ns2"
+ exit $ksft_skip
+fi
-ip link add veth0 netns ns0 type veth peer name eth0 netns ns1 > /dev/null 2>&1
+ip link add veth0 netns "$ns0" type veth peer name eth0 netns "$ns1" > /dev/null 2>&1
if [ $? -ne 0 ];then
echo "SKIP: No virtual ethernet pair device support in kernel"
exit $ksft_skip
fi
-ip link add veth1 netns ns0 type veth peer name eth0 netns ns2
+ip link add veth1 netns "$ns0" type veth peer name eth0 netns "$ns2"
-ip -net ns0 link set lo up
-ip -net ns0 link set veth0 up
-ip -net ns0 addr add 10.0.1.1/24 dev veth0
-ip -net ns0 addr add dead:1::1/64 dev veth0
+ip -net "$ns0" link set lo up
+ip -net "$ns0" link set veth0 up
+ip -net "$ns0" addr add 10.0.1.1/24 dev veth0
+ip -net "$ns0" addr add dead:1::1/64 dev veth0
-ip -net ns0 link set veth1 up
-ip -net ns0 addr add 10.0.2.1/24 dev veth1
-ip -net ns0 addr add dead:2::1/64 dev veth1
+ip -net "$ns0" link set veth1 up
+ip -net "$ns0" addr add 10.0.2.1/24 dev veth1
+ip -net "$ns0" addr add dead:2::1/64 dev veth1
for i in 1 2; do
- ip -net ns$i link set lo up
- ip -net ns$i link set eth0 up
- ip -net ns$i addr add 10.0.$i.99/24 dev eth0
- ip -net ns$i route add default via 10.0.$i.1
- ip -net ns$i addr add dead:$i::99/64 dev eth0
- ip -net ns$i route add default via dead:$i::1
+ ip -net ns$i-$sfx link set lo up
+ ip -net ns$i-$sfx link set eth0 up
+ ip -net ns$i-$sfx addr add 10.0.$i.99/24 dev eth0
+ ip -net ns$i-$sfx route add default via 10.0.$i.1
+ ip -net ns$i-$sfx addr add dead:$i::99/64 dev eth0
+ ip -net ns$i-$sfx route add default via dead:$i::1
done
bad_counter()
@@ -66,8 +80,9 @@ bad_counter()
local ns=$1
local counter=$2
local expect=$3
+ local tag=$4
- echo "ERROR: $counter counter in $ns has unexpected value (expected $expect)" 1>&2
+ echo "ERROR: $counter counter in $ns has unexpected value (expected $expect) at $tag" 1>&2
ip netns exec $ns nft list counter inet filter $counter 1>&2
}
@@ -78,24 +93,24 @@ check_counters()
cnt=$(ip netns exec $ns nft list counter inet filter ns0in | grep -q "packets 1 bytes 84")
if [ $? -ne 0 ]; then
- bad_counter $ns ns0in "packets 1 bytes 84"
+ bad_counter $ns ns0in "packets 1 bytes 84" "check_counters 1"
lret=1
fi
cnt=$(ip netns exec $ns nft list counter inet filter ns0out | grep -q "packets 1 bytes 84")
if [ $? -ne 0 ]; then
- bad_counter $ns ns0out "packets 1 bytes 84"
+ bad_counter $ns ns0out "packets 1 bytes 84" "check_counters 2"
lret=1
fi
expect="packets 1 bytes 104"
cnt=$(ip netns exec $ns nft list counter inet filter ns0in6 | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter $ns ns0in6 "$expect"
+ bad_counter $ns ns0in6 "$expect" "check_counters 3"
lret=1
fi
cnt=$(ip netns exec $ns nft list counter inet filter ns0out6 | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter $ns ns0out6 "$expect"
+ bad_counter $ns ns0out6 "$expect" "check_counters 4"
lret=1
fi
@@ -107,41 +122,41 @@ check_ns0_counters()
local ns=$1
local lret=0
- cnt=$(ip netns exec ns0 nft list counter inet filter ns0in | grep -q "packets 0 bytes 0")
+ cnt=$(ip netns exec "$ns0" nft list counter inet filter ns0in | grep -q "packets 0 bytes 0")
if [ $? -ne 0 ]; then
- bad_counter ns0 ns0in "packets 0 bytes 0"
+ bad_counter "$ns0" ns0in "packets 0 bytes 0" "check_ns0_counters 1"
lret=1
fi
- cnt=$(ip netns exec ns0 nft list counter inet filter ns0in6 | grep -q "packets 0 bytes 0")
+ cnt=$(ip netns exec "$ns0" nft list counter inet filter ns0in6 | grep -q "packets 0 bytes 0")
if [ $? -ne 0 ]; then
- bad_counter ns0 ns0in6 "packets 0 bytes 0"
+ bad_counter "$ns0" ns0in6 "packets 0 bytes 0"
lret=1
fi
- cnt=$(ip netns exec ns0 nft list counter inet filter ns0out | grep -q "packets 0 bytes 0")
+ cnt=$(ip netns exec "$ns0" nft list counter inet filter ns0out | grep -q "packets 0 bytes 0")
if [ $? -ne 0 ]; then
- bad_counter ns0 ns0out "packets 0 bytes 0"
+ bad_counter "$ns0" ns0out "packets 0 bytes 0" "check_ns0_counters 2"
lret=1
fi
- cnt=$(ip netns exec ns0 nft list counter inet filter ns0out6 | grep -q "packets 0 bytes 0")
+ cnt=$(ip netns exec "$ns0" nft list counter inet filter ns0out6 | grep -q "packets 0 bytes 0")
if [ $? -ne 0 ]; then
- bad_counter ns0 ns0out6 "packets 0 bytes 0"
+ bad_counter "$ns0" ns0out6 "packets 0 bytes 0" "check_ns0_counters3 "
lret=1
fi
for dir in "in" "out" ; do
expect="packets 1 bytes 84"
- cnt=$(ip netns exec ns0 nft list counter inet filter ${ns}${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns0" nft list counter inet filter ${ns}${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns0 $ns$dir "$expect"
+ bad_counter "$ns0" $ns$dir "$expect" "check_ns0_counters 4"
lret=1
fi
expect="packets 1 bytes 104"
- cnt=$(ip netns exec ns0 nft list counter inet filter ${ns}${dir}6 | grep -q "$expect")
+ cnt=$(ip netns exec "$ns0" nft list counter inet filter ${ns}${dir}6 | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns0 $ns$dir6 "$expect"
+ bad_counter "$ns0" $ns$dir6 "$expect" "check_ns0_counters 5"
lret=1
fi
done
@@ -152,7 +167,7 @@ check_ns0_counters()
reset_counters()
{
for i in 0 1 2;do
- ip netns exec ns$i nft reset counters inet > /dev/null
+ ip netns exec ns$i-$sfx nft reset counters inet > /dev/null
done
}
@@ -166,7 +181,7 @@ test_local_dnat6()
IPF="ip6"
fi
-ip netns exec ns0 nft -f - <<EOF
+ip netns exec "$ns0" nft -f - <<EOF
table $family nat {
chain output {
type nat hook output priority 0; policy accept;
@@ -180,7 +195,7 @@ EOF
fi
# ping netns1, expect rewrite to netns2
- ip netns exec ns0 ping -q -c 1 dead:1::99 > /dev/null
+ ip netns exec "$ns0" ping -q -c 1 dead:1::99 > /dev/null
if [ $? -ne 0 ]; then
lret=1
echo "ERROR: ping6 failed"
@@ -189,18 +204,18 @@ EOF
expect="packets 0 bytes 0"
for dir in "in6" "out6" ; do
- cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns0 ns1$dir "$expect"
+ bad_counter "$ns0" ns1$dir "$expect" "test_local_dnat6 1"
lret=1
fi
done
expect="packets 1 bytes 104"
for dir in "in6" "out6" ; do
- cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns0 ns2$dir "$expect"
+ bad_counter "$ns0" ns2$dir "$expect" "test_local_dnat6 2"
lret=1
fi
done
@@ -208,9 +223,9 @@ EOF
# expect 0 count in ns1
expect="packets 0 bytes 0"
for dir in "in6" "out6" ; do
- cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns1 ns0$dir "$expect"
+ bad_counter "$ns1" ns0$dir "$expect" "test_local_dnat6 3"
lret=1
fi
done
@@ -218,15 +233,15 @@ EOF
# expect 1 packet in ns2
expect="packets 1 bytes 104"
for dir in "in6" "out6" ; do
- cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns2" nft list counter inet filter ns0${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns2 ns0$dir "$expect"
+ bad_counter "$ns2" ns0$dir "$expect" "test_local_dnat6 4"
lret=1
fi
done
- test $lret -eq 0 && echo "PASS: ipv6 ping to ns1 was $family NATted to ns2"
- ip netns exec ns0 nft flush chain ip6 nat output
+ test $lret -eq 0 && echo "PASS: ipv6 ping to $ns1 was $family NATted to $ns2"
+ ip netns exec "$ns0" nft flush chain ip6 nat output
return $lret
}
@@ -241,7 +256,7 @@ test_local_dnat()
IPF="ip"
fi
-ip netns exec ns0 nft -f - <<EOF 2>/dev/null
+ip netns exec "$ns0" nft -f - <<EOF 2>/dev/null
table $family nat {
chain output {
type nat hook output priority 0; policy accept;
@@ -260,7 +275,7 @@ EOF
fi
# ping netns1, expect rewrite to netns2
- ip netns exec ns0 ping -q -c 1 10.0.1.99 > /dev/null
+ ip netns exec "$ns0" ping -q -c 1 10.0.1.99 > /dev/null
if [ $? -ne 0 ]; then
lret=1
echo "ERROR: ping failed"
@@ -269,18 +284,18 @@ EOF
expect="packets 0 bytes 0"
for dir in "in" "out" ; do
- cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns0 ns1$dir "$expect"
+ bad_counter "$ns0" ns1$dir "$expect" "test_local_dnat 1"
lret=1
fi
done
expect="packets 1 bytes 84"
for dir in "in" "out" ; do
- cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns0 ns2$dir "$expect"
+ bad_counter "$ns0" ns2$dir "$expect" "test_local_dnat 2"
lret=1
fi
done
@@ -288,9 +303,9 @@ EOF
# expect 0 count in ns1
expect="packets 0 bytes 0"
for dir in "in" "out" ; do
- cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns1 ns0$dir "$expect"
+ bad_counter "$ns1" ns0$dir "$expect" "test_local_dnat 3"
lret=1
fi
done
@@ -298,19 +313,19 @@ EOF
# expect 1 packet in ns2
expect="packets 1 bytes 84"
for dir in "in" "out" ; do
- cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns2" nft list counter inet filter ns0${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns2 ns0$dir "$expect"
+ bad_counter "$ns2" ns0$dir "$expect" "test_local_dnat 4"
lret=1
fi
done
- test $lret -eq 0 && echo "PASS: ping to ns1 was $family NATted to ns2"
+ test $lret -eq 0 && echo "PASS: ping to $ns1 was $family NATted to $ns2"
- ip netns exec ns0 nft flush chain $family nat output
+ ip netns exec "$ns0" nft flush chain $family nat output
reset_counters
- ip netns exec ns0 ping -q -c 1 10.0.1.99 > /dev/null
+ ip netns exec "$ns0" ping -q -c 1 10.0.1.99 > /dev/null
if [ $? -ne 0 ]; then
lret=1
echo "ERROR: ping failed"
@@ -319,17 +334,17 @@ EOF
expect="packets 1 bytes 84"
for dir in "in" "out" ; do
- cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns1 ns1$dir "$expect"
+ bad_counter "$ns1" ns1$dir "$expect" "test_local_dnat 5"
lret=1
fi
done
expect="packets 0 bytes 0"
for dir in "in" "out" ; do
- cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns0 ns2$dir "$expect"
+ bad_counter "$ns0" ns2$dir "$expect" "test_local_dnat 6"
lret=1
fi
done
@@ -337,9 +352,9 @@ EOF
# expect 1 count in ns1
expect="packets 1 bytes 84"
for dir in "in" "out" ; do
- cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns0 ns0$dir "$expect"
+ bad_counter "$ns0" ns0$dir "$expect" "test_local_dnat 7"
lret=1
fi
done
@@ -347,14 +362,14 @@ EOF
# expect 0 packet in ns2
expect="packets 0 bytes 0"
for dir in "in" "out" ; do
- cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns2" nft list counter inet filter ns0${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns2 ns2$dir "$expect"
+ bad_counter "$ns2" ns0$dir "$expect" "test_local_dnat 8"
lret=1
fi
done
- test $lret -eq 0 && echo "PASS: ping to ns1 OK after $family nat output chain flush"
+ test $lret -eq 0 && echo "PASS: ping to $ns1 OK after $family nat output chain flush"
return $lret
}
@@ -366,26 +381,26 @@ test_masquerade6()
local natflags=$2
local lret=0
- ip netns exec ns0 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
+ ip netns exec "$ns0" sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
- ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+ ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
if [ $? -ne 0 ] ; then
- echo "ERROR: cannot ping ns1 from ns2 via ipv6"
+ echo "ERROR: cannot ping $ns1 from $ns2 via ipv6"
return 1
lret=1
fi
expect="packets 1 bytes 104"
for dir in "in6" "out6" ; do
- cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns1 ns2$dir "$expect"
+ bad_counter "$ns1" ns2$dir "$expect" "test_masquerade6 1"
lret=1
fi
- cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns2 ns1$dir "$expect"
+ bad_counter "$ns2" ns1$dir "$expect" "test_masquerade6 2"
lret=1
fi
done
@@ -393,7 +408,7 @@ test_masquerade6()
reset_counters
# add masquerading rule
-ip netns exec ns0 nft -f - <<EOF
+ip netns exec "$ns0" nft -f - <<EOF
table $family nat {
chain postrouting {
type nat hook postrouting priority 0; policy accept;
@@ -406,24 +421,24 @@ EOF
return $ksft_skip
fi
- ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+ ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
if [ $? -ne 0 ] ; then
- echo "ERROR: cannot ping ns1 from ns2 with active $family masquerade $natflags"
+ echo "ERROR: cannot ping $ns1 from $ns2 with active $family masquerade $natflags"
lret=1
fi
# ns1 should have seen packets from ns0, due to masquerade
expect="packets 1 bytes 104"
for dir in "in6" "out6" ; do
- cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns1 ns0$dir "$expect"
+ bad_counter "$ns1" ns0$dir "$expect" "test_masquerade6 3"
lret=1
fi
- cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns2 ns1$dir "$expect"
+ bad_counter "$ns2" ns1$dir "$expect" "test_masquerade6 4"
lret=1
fi
done
@@ -431,32 +446,32 @@ EOF
# ns1 should not have seen packets from ns2, due to masquerade
expect="packets 0 bytes 0"
for dir in "in6" "out6" ; do
- cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns1 ns0$dir "$expect"
+ bad_counter "$ns1" ns0$dir "$expect" "test_masquerade6 5"
lret=1
fi
- cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns2 ns1$dir "$expect"
+ bad_counter "$ns0" ns1$dir "$expect" "test_masquerade6 6"
lret=1
fi
done
- ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+ ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
if [ $? -ne 0 ] ; then
- echo "ERROR: cannot ping ns1 from ns2 with active ipv6 masquerade $natflags (attempt 2)"
+ echo "ERROR: cannot ping $ns1 from $ns2 with active ipv6 masquerade $natflags (attempt 2)"
lret=1
fi
- ip netns exec ns0 nft flush chain $family nat postrouting
+ ip netns exec "$ns0" nft flush chain $family nat postrouting
if [ $? -ne 0 ]; then
echo "ERROR: Could not flush $family nat postrouting" 1>&2
lret=1
fi
- test $lret -eq 0 && echo "PASS: $family IPv6 masquerade $natflags for ns2"
+ test $lret -eq 0 && echo "PASS: $family IPv6 masquerade $natflags for $ns2"
return $lret
}
@@ -467,26 +482,26 @@ test_masquerade()
local natflags=$2
local lret=0
- ip netns exec ns0 sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
- ip netns exec ns0 sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
+ ip netns exec "$ns0" sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
+ ip netns exec "$ns0" sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
- ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+ ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
if [ $? -ne 0 ] ; then
- echo "ERROR: cannot ping ns1 from ns2 $natflags"
+ echo "ERROR: cannot ping $ns1 from "$ns2" $natflags"
lret=1
fi
expect="packets 1 bytes 84"
for dir in "in" "out" ; do
- cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns1 ns2$dir "$expect"
+ bad_counter "$ns1" ns2$dir "$expect" "test_masquerade 1"
lret=1
fi
- cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns2 ns1$dir "$expect"
+ bad_counter "$ns2" ns1$dir "$expect" "test_masquerade 2"
lret=1
fi
done
@@ -494,7 +509,7 @@ test_masquerade()
reset_counters
# add masquerading rule
-ip netns exec ns0 nft -f - <<EOF
+ip netns exec "$ns0" nft -f - <<EOF
table $family nat {
chain postrouting {
type nat hook postrouting priority 0; policy accept;
@@ -507,24 +522,24 @@ EOF
return $ksft_skip
fi
- ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+ ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
if [ $? -ne 0 ] ; then
- echo "ERROR: cannot ping ns1 from ns2 with active $family masquerade $natflags"
+ echo "ERROR: cannot ping $ns1 from $ns2 with active $family masquerade $natflags"
lret=1
fi
# ns1 should have seen packets from ns0, due to masquerade
expect="packets 1 bytes 84"
for dir in "in" "out" ; do
- cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns1 ns0$dir "$expect"
+ bad_counter "$ns1" ns0$dir "$expect" "test_masquerade 3"
lret=1
fi
- cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns2 ns1$dir "$expect"
+ bad_counter "$ns2" ns1$dir "$expect" "test_masquerade 4"
lret=1
fi
done
@@ -532,32 +547,32 @@ EOF
# ns1 should not have seen packets from ns2, due to masquerade
expect="packets 0 bytes 0"
for dir in "in" "out" ; do
- cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns1 ns0$dir "$expect"
+ bad_counter "$ns1" ns0$dir "$expect" "test_masquerade 5"
lret=1
fi
- cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns2 ns1$dir "$expect"
+ bad_counter "$ns0" ns1$dir "$expect" "test_masquerade 6"
lret=1
fi
done
- ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+ ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
if [ $? -ne 0 ] ; then
- echo "ERROR: cannot ping ns1 from ns2 with active ip masquerade $natflags (attempt 2)"
+ echo "ERROR: cannot ping $ns1 from $ns2 with active ip masquerade $natflags (attempt 2)"
lret=1
fi
- ip netns exec ns0 nft flush chain $family nat postrouting
+ ip netns exec "$ns0" nft flush chain $family nat postrouting
if [ $? -ne 0 ]; then
echo "ERROR: Could not flush $family nat postrouting" 1>&2
lret=1
fi
- test $lret -eq 0 && echo "PASS: $family IP masquerade $natflags for ns2"
+ test $lret -eq 0 && echo "PASS: $family IP masquerade $natflags for $ns2"
return $lret
}
@@ -567,25 +582,25 @@ test_redirect6()
local family=$1
local lret=0
- ip netns exec ns0 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
+ ip netns exec "$ns0" sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
- ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+ ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
if [ $? -ne 0 ] ; then
- echo "ERROR: cannnot ping ns1 from ns2 via ipv6"
+ echo "ERROR: cannnot ping $ns1 from $ns2 via ipv6"
lret=1
fi
expect="packets 1 bytes 104"
for dir in "in6" "out6" ; do
- cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns1 ns2$dir "$expect"
+ bad_counter "$ns1" ns2$dir "$expect" "test_redirect6 1"
lret=1
fi
- cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns2 ns1$dir "$expect"
+ bad_counter "$ns2" ns1$dir "$expect" "test_redirect6 2"
lret=1
fi
done
@@ -593,7 +608,7 @@ test_redirect6()
reset_counters
# add redirect rule
-ip netns exec ns0 nft -f - <<EOF
+ip netns exec "$ns0" nft -f - <<EOF
table $family nat {
chain prerouting {
type nat hook prerouting priority 0; policy accept;
@@ -606,18 +621,18 @@ EOF
return $ksft_skip
fi
- ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+ ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
if [ $? -ne 0 ] ; then
- echo "ERROR: cannot ping ns1 from ns2 via ipv6 with active $family redirect"
+ echo "ERROR: cannot ping $ns1 from $ns2 via ipv6 with active $family redirect"
lret=1
fi
# ns1 should have seen no packets from ns2, due to redirection
expect="packets 0 bytes 0"
for dir in "in6" "out6" ; do
- cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns1 ns0$dir "$expect"
+ bad_counter "$ns1" ns0$dir "$expect" "test_redirect6 3"
lret=1
fi
done
@@ -625,20 +640,20 @@ EOF
# ns0 should have seen packets from ns2, due to masquerade
expect="packets 1 bytes 104"
for dir in "in6" "out6" ; do
- cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns1 ns0$dir "$expect"
+ bad_counter "$ns1" ns0$dir "$expect" "test_redirect6 4"
lret=1
fi
done
- ip netns exec ns0 nft delete table $family nat
+ ip netns exec "$ns0" nft delete table $family nat
if [ $? -ne 0 ]; then
echo "ERROR: Could not delete $family nat table" 1>&2
lret=1
fi
- test $lret -eq 0 && echo "PASS: $family IPv6 redirection for ns2"
+ test $lret -eq 0 && echo "PASS: $family IPv6 redirection for $ns2"
return $lret
}
@@ -648,26 +663,26 @@ test_redirect()
local family=$1
local lret=0
- ip netns exec ns0 sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
- ip netns exec ns0 sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
+ ip netns exec "$ns0" sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
+ ip netns exec "$ns0" sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
- ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+ ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
if [ $? -ne 0 ] ; then
- echo "ERROR: cannot ping ns1 from ns2"
+ echo "ERROR: cannot ping $ns1 from $ns2"
lret=1
fi
expect="packets 1 bytes 84"
for dir in "in" "out" ; do
- cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns1 ns2$dir "$expect"
+ bad_counter "$ns1" $ns2$dir "$expect" "test_redirect 1"
lret=1
fi
- cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns2 ns1$dir "$expect"
+ bad_counter "$ns2" ns1$dir "$expect" "test_redirect 2"
lret=1
fi
done
@@ -675,7 +690,7 @@ test_redirect()
reset_counters
# add redirect rule
-ip netns exec ns0 nft -f - <<EOF
+ip netns exec "$ns0" nft -f - <<EOF
table $family nat {
chain prerouting {
type nat hook prerouting priority 0; policy accept;
@@ -688,9 +703,9 @@ EOF
return $ksft_skip
fi
- ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+ ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
if [ $? -ne 0 ] ; then
- echo "ERROR: cannot ping ns1 from ns2 with active $family ip redirect"
+ echo "ERROR: cannot ping $ns1 from $ns2 with active $family ip redirect"
lret=1
fi
@@ -698,9 +713,9 @@ EOF
expect="packets 0 bytes 0"
for dir in "in" "out" ; do
- cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns1 ns0$dir "$expect"
+ bad_counter "$ns1" ns0$dir "$expect" "test_redirect 3"
lret=1
fi
done
@@ -708,28 +723,28 @@ EOF
# ns0 should have seen packets from ns2, due to masquerade
expect="packets 1 bytes 84"
for dir in "in" "out" ; do
- cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns1 ns0$dir "$expect"
+ bad_counter "$ns0" ns0$dir "$expect" "test_redirect 4"
lret=1
fi
done
- ip netns exec ns0 nft delete table $family nat
+ ip netns exec "$ns0" nft delete table $family nat
if [ $? -ne 0 ]; then
echo "ERROR: Could not delete $family nat table" 1>&2
lret=1
fi
- test $lret -eq 0 && echo "PASS: $family IP redirection for ns2"
+ test $lret -eq 0 && echo "PASS: $family IP redirection for $ns2"
return $lret
}
-# ip netns exec ns0 ping -c 1 -q 10.0.$i.99
+# ip netns exec "$ns0" ping -c 1 -q 10.0.$i.99
for i in 0 1 2; do
-ip netns exec ns$i nft -f - <<EOF
+ip netns exec ns$i-$sfx nft -f - <<EOF
table inet filter {
counter ns0in {}
counter ns1in {}
@@ -796,18 +811,18 @@ done
sleep 3
# test basic connectivity
for i in 1 2; do
- ip netns exec ns0 ping -c 1 -q 10.0.$i.99 > /dev/null
+ ip netns exec "$ns0" ping -c 1 -q 10.0.$i.99 > /dev/null
if [ $? -ne 0 ];then
echo "ERROR: Could not reach other namespace(s)" 1>&2
ret=1
fi
- ip netns exec ns0 ping -c 1 -q dead:$i::99 > /dev/null
+ ip netns exec "$ns0" ping -c 1 -q dead:$i::99 > /dev/null
if [ $? -ne 0 ];then
echo "ERROR: Could not reach other namespace(s) via ipv6" 1>&2
ret=1
fi
- check_counters ns$i
+ check_counters ns$i-$sfx
if [ $? -ne 0 ]; then
ret=1
fi
@@ -820,7 +835,7 @@ for i in 1 2; do
done
if [ $ret -eq 0 ];then
- echo "PASS: netns routing/connectivity: ns0 can reach ns1 and ns2"
+ echo "PASS: netns routing/connectivity: $ns0 can reach $ns1 and $ns2"
fi
reset_counters
@@ -846,4 +861,9 @@ reset_counters
$test_inet_nat && test_redirect inet
$test_inet_nat && test_redirect6 inet
+if [ $ret -ne 0 ];then
+ echo -n "FAIL: "
+ nft --version
+fi
+
exit $ret
--
2.23.0
On Tue, Nov 26, 2019 at 04:56:32PM +0100, Florian Westphal wrote:
> Naresh Kamboju <[email protected]> wrote:
> > Do you see the following error while running selftests netfilter
> > nft_nat.sh test ?
> > Are we missing any kernel config fragments ? We are merging configs
> > from the directory.
normally i will attach my .config file . please compare it with yours
> Does this patch help? Even if it doesn't, its probably a good idea
> to add it.
i applied the patch and tested it. it seems to work like a charm.
---------x-------------x---------------x----------------
$sudo ./nft_nat.sh
PASS: netns routing/connectivity: ns0-jwIWrgf5 can reach ns1-jwIWrgf5 and ns2-jwIWrgf5
PASS: ping to ns1-jwIWrgf5 was ip NATted to ns2-jwIWrgf5
PASS: ping to ns1-jwIWrgf5 OK after ip nat output chain flush
PASS: ipv6 ping to ns1-jwIWrgf5 was ip6 NATted to ns2-jwIWrgf5
PASS: ping to ns1-jwIWrgf5 was inet NATted to ns2-jwIWrgf5
PASS: ping to ns1-jwIWrgf5 OK after inet nat output chain flush
PASS: ipv6 ping to ns1-jwIWrgf5 was inet NATted to ns2-jwIWrgf5
PASS: ip IP masquerade for ns2-jwIWrgf5
PASS: ip6 IPv6 masquerade for ns2-jwIWrgf5
PASS: inet IP masquerade for ns2-jwIWrgf5
PASS: inet IPv6 masquerade for ns2-jwIWrgf5
PASS: ip IP masquerade fully-random for ns2-jwIWrgf5
PASS: ip6 IPv6 masquerade fully-random for ns2-jwIWrgf5
PASS: inet IP masquerade fully-random for ns2-jwIWrgf5
PASS: inet IPv6 masquerade fully-random for ns2-jwIWrgf5
PASS: ip IP redirection for ns2-jwIWrgf5
PASS: ip6 IPv6 redirection for ns2-jwIWrgf5
PASS: inet IP redirection for ns2-jwIWrgf5
PASS: inet IPv6 redirection for ns2-jwIWrgf5
$
--------------x-------------------x-------------------------------
Tested-by: Jeffrin Jose T <[email protected]>
Signed-off-by: Jeffrin Jose T <[email protected]>
--
software engineer
rajagiri school of engineering and technology
On Wed, Nov 27, 2019 at 5:49 AM Jeffrin Jose
<[email protected]> wrote:
> Tested-by: Jeffrin Jose T <[email protected]>
> Signed-off-by: Jeffrin Jose T <[email protected]>
i do
--
software engineer
rajagiri school of engineering and technology
> > Tested-by: Jeffrin Jose T <[email protected]>
> > Signed-off-by: Jeffrin Jose T <[email protected]>
"i do not know if i deserve Signed-off-by "
--
software engineer
rajagiri school of engineering and technology
On Tue, 26 Nov 2019 at 21:26, Florian Westphal <[email protected]> wrote:
>
> Naresh Kamboju <[email protected]> wrote:
> > Do you see the following error while running selftests netfilter
> > nft_nat.sh test ?
> > Are we missing any kernel config fragments ? We are merging configs
> > from the directory.
> >
> > # selftests netfilter nft_nat.sh
> > netfilter: nft_nat.sh_ #
> > # Cannot create namespace file \"/var/run/netns/ns1\" File exists
>
> 'ns1' is not a good name.
> What is the output of nft --version?
nftables v0.7 (Scrooge McDuck)
>
> Does this patch help? Even if it doesn't, its probably a good idea
> to add it.
I tested on arm64 Hikey and did not help.
However, I will validate on x86_64 and other devices and let you know.
>
> Subject: [PATCH] selftests: netfilter: use randomized netns names
>
> Using ns0, ns1, etc. isn't a good idea, they might already exist.
> Add a random suffix to avoid interering with other, unrelated net namespaces.
>
> Signed-off-by: Florian Westphal <[email protected]>
> ---
> tools/testing/selftests/netfilter/nft_nat.sh | 332 ++++++++++---------
> 1 file changed, 176 insertions(+), 156 deletions(-)
+ ./nft_nat.sh
[ 29.100929] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[ 29.191505] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
internal:0:0-0: Error: Could not open file \"-\": No such file or directory
internal:0:0-0: Error: Could not open file \"-\": No such file or directory
internal:0:0-0: Error: Could not open file \"-\": No such file or directory
[ 29.985551] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<cmdline>:1:6-12: Error: syntax error, unexpected counter
list counter inet filter ns0in
^^^^^^^
ERROR: ns0in counter in ns1-Tj5FGVgK has unexpected value (expected
packets 1 bytes 84) at check_counters 1
<cmdline>:1:6-12: Error: syntax error, unexpected counter
list counter inet filter ns0in
^^^^^^^
<cmdline>:1:6-12: Error: syntax error, unexpected counter
list counter inet filter ns0out
^^^^^^^
ref:
https://lkft.validation.linaro.org/scheduler/job/1025331#L1508
Naresh Kamboju <[email protected]> wrote:
> On Tue, 26 Nov 2019 at 21:26, Florian Westphal <[email protected]> wrote:
> >
> > Naresh Kamboju <[email protected]> wrote:
> > > Do you see the following error while running selftests netfilter
> > > nft_nat.sh test ?
> > > Are we missing any kernel config fragments ? We are merging configs
> > > from the directory.
> > >
> > > # selftests netfilter nft_nat.sh
> > > netfilter: nft_nat.sh_ #
> > > # Cannot create namespace file \"/var/run/netns/ns1\" File exists
> >
> > 'ns1' is not a good name.
> > What is the output of nft --version?
>
> nftables v0.7 (Scrooge McDuck)
Oh, that explains it. "-" only works
since 0.8.4 ...
I will submit another patch that uses /dev/stdin instead.