2019-11-28 16:04:28

by Togorean, Bogdan

[permalink] [raw]
Subject: [PATCH v3 0/2] drm: bridge: adv7511: Add support For ADV7535

This patch-set add support for ADV7535 part in ADV7511 driver.

ADV7535 and ADV7533 are pin to pin compatible parts but ADV7535
support TMDS clock upto 148.5Mhz and resolutions up to 1080p@60Hz.

---
Changes in v3:
- remove CONFIG_DRM_I2C_ADV7533 from Kconfig. Now driver support
all chip versions
- create macros for v1p2 config registers
- remove dummy functions from header

Bogdan Togorean (2):
dt-bindings: drm: bridge: adv7511: Add ADV7535 support
drm: bridge: adv7511: Add support for ADV7535

.../bindings/display/bridge/adi,adv7511.txt | 23 +++++-----
drivers/gpu/drm/bridge/adv7511/Kconfig | 13 ++----
drivers/gpu/drm/bridge/adv7511/Makefile | 3 +-
drivers/gpu/drm/bridge/adv7511/adv7511.h | 44 +++----------------
drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 35 ++++++++++-----
5 files changed, 44 insertions(+), 74 deletions(-)

--
2.23.0


2019-11-28 16:04:42

by Togorean, Bogdan

[permalink] [raw]
Subject: [PATCH v3 2/2] drm: bridge: adv7511: Add support for ADV7535

ADV7535 is a DSI to HDMI bridge chip like ADV7533 but it allows
1080p@60Hz. v1p2 is fixed to 1.8V on ADV7535 but on ADV7533 can be 1.2V
or 1.8V and is configurable in a register.

Signed-off-by: Bogdan Togorean <[email protected]>
---
drivers/gpu/drm/bridge/adv7511/Kconfig | 13 ++----
drivers/gpu/drm/bridge/adv7511/Makefile | 3 +-
drivers/gpu/drm/bridge/adv7511/adv7511.h | 44 +++-----------------
drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 35 ++++++++++------
4 files changed, 32 insertions(+), 63 deletions(-)

diff --git a/drivers/gpu/drm/bridge/adv7511/Kconfig b/drivers/gpu/drm/bridge/adv7511/Kconfig
index 8a56ff81f4fb..47d4eb9e845d 100644
--- a/drivers/gpu/drm/bridge/adv7511/Kconfig
+++ b/drivers/gpu/drm/bridge/adv7511/Kconfig
@@ -4,8 +4,9 @@ config DRM_I2C_ADV7511
depends on OF
select DRM_KMS_HELPER
select REGMAP_I2C
+ select DRM_MIPI_DSI
help
- Support for the Analog Device ADV7511(W) and ADV7513 HDMI encoders.
+ Support for the Analog Device ADV7511(W)/13/33/35 HDMI encoders.

config DRM_I2C_ADV7511_AUDIO
bool "ADV7511 HDMI Audio driver"
@@ -15,16 +16,8 @@ config DRM_I2C_ADV7511_AUDIO
Support the ADV7511 HDMI Audio interface. This is used in
conjunction with the AV7511 HDMI driver.

-config DRM_I2C_ADV7533
- bool "ADV7533 encoder"
- depends on DRM_I2C_ADV7511
- select DRM_MIPI_DSI
- default y
- help
- Support for the Analog Devices ADV7533 DSI to HDMI encoder.
-
config DRM_I2C_ADV7511_CEC
- bool "ADV7511/33 HDMI CEC driver"
+ bool "ADV7511/33/35 HDMI CEC driver"
depends on DRM_I2C_ADV7511
select CEC_CORE
default y
diff --git a/drivers/gpu/drm/bridge/adv7511/Makefile b/drivers/gpu/drm/bridge/adv7511/Makefile
index b46ebeb35fd4..d8ceb534b51f 100644
--- a/drivers/gpu/drm/bridge/adv7511/Makefile
+++ b/drivers/gpu/drm/bridge/adv7511/Makefile
@@ -1,6 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-only
-adv7511-y := adv7511_drv.o
+adv7511-y := adv7511_drv.o adv7533.o
adv7511-$(CONFIG_DRM_I2C_ADV7511_AUDIO) += adv7511_audio.o
adv7511-$(CONFIG_DRM_I2C_ADV7511_CEC) += adv7511_cec.o
-adv7511-$(CONFIG_DRM_I2C_ADV7533) += adv7533.o
obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511.o
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h b/drivers/gpu/drm/bridge/adv7511/adv7511.h
index 52b2adfdc877..ed9cfd944098 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
@@ -220,6 +220,10 @@

#define ADV7533_REG_CEC_OFFSET 0x70

+#define ADV7533_REG_SUPPLY_SELECT 0xe4
+
+#define ADV7533_V1P2_ENABLE BIT(7)
+
enum adv7511_input_clock {
ADV7511_INPUT_CLOCK_1X,
ADV7511_INPUT_CLOCK_2X,
@@ -320,6 +324,7 @@ struct adv7511_video_config {
enum adv7511_type {
ADV7511,
ADV7533,
+ ADV7535,
};

#define ADV7511_MAX_ADDRS 3
@@ -393,7 +398,6 @@ static inline int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511)
}
#endif

-#ifdef CONFIG_DRM_I2C_ADV7533
void adv7533_dsi_power_on(struct adv7511 *adv);
void adv7533_dsi_power_off(struct adv7511 *adv);
void adv7533_mode_set(struct adv7511 *adv, const struct drm_display_mode *mode);
@@ -402,44 +406,6 @@ int adv7533_patch_cec_registers(struct adv7511 *adv);
int adv7533_attach_dsi(struct adv7511 *adv);
void adv7533_detach_dsi(struct adv7511 *adv);
int adv7533_parse_dt(struct device_node *np, struct adv7511 *adv);
-#else
-static inline void adv7533_dsi_power_on(struct adv7511 *adv)
-{
-}
-
-static inline void adv7533_dsi_power_off(struct adv7511 *adv)
-{
-}
-
-static inline void adv7533_mode_set(struct adv7511 *adv,
- const struct drm_display_mode *mode)
-{
-}
-
-static inline int adv7533_patch_registers(struct adv7511 *adv)
-{
- return -ENODEV;
-}
-
-static inline int adv7533_patch_cec_registers(struct adv7511 *adv)
-{
- return -ENODEV;
-}
-
-static inline int adv7533_attach_dsi(struct adv7511 *adv)
-{
- return -ENODEV;
-}
-
-static inline void adv7533_detach_dsi(struct adv7511 *adv)
-{
-}
-
-static inline int adv7533_parse_dt(struct device_node *np, struct adv7511 *adv)
-{
- return -ENODEV;
-}
-#endif

#ifdef CONFIG_DRM_I2C_ADV7511_AUDIO
int adv7511_audio_init(struct device *dev, struct adv7511 *adv7511);
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index 9e13e466e72c..35595472e771 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -367,7 +367,7 @@ static void adv7511_power_on(struct adv7511 *adv7511)
*/
regcache_sync(adv7511->regmap);

- if (adv7511->type == ADV7533)
+ if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
adv7533_dsi_power_on(adv7511);
adv7511->powered = true;
}
@@ -387,7 +387,7 @@ static void __adv7511_power_off(struct adv7511 *adv7511)
static void adv7511_power_off(struct adv7511 *adv7511)
{
__adv7511_power_off(adv7511);
- if (adv7511->type == ADV7533)
+ if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
adv7533_dsi_power_off(adv7511);
adv7511->powered = false;
}
@@ -761,7 +761,7 @@ static void adv7511_mode_set(struct adv7511 *adv7511,
regmap_update_bits(adv7511->regmap, 0x17,
0x60, (vsync_polarity << 6) | (hsync_polarity << 5));

- if (adv7511->type == ADV7533)
+ if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
adv7533_mode_set(adv7511, adj_mode);

drm_mode_copy(&adv7511->curr_mode, adj_mode);
@@ -874,7 +874,7 @@ static int adv7511_bridge_attach(struct drm_bridge *bridge)
&adv7511_connector_helper_funcs);
drm_connector_attach_encoder(&adv->connector, bridge->encoder);

- if (adv->type == ADV7533)
+ if (adv->type == ADV7533 || adv->type == ADV7535)
ret = adv7533_attach_dsi(adv);

if (adv->i2c_main->irq)
@@ -903,6 +903,7 @@ static const char * const adv7511_supply_names[] = {
"dvdd-3v",
};

+/* The order of entries is important. If changed update hardcoded indices */
static const char * const adv7533_supply_names[] = {
"avdd",
"dvdd",
@@ -952,7 +953,7 @@ static bool adv7511_cec_register_volatile(struct device *dev, unsigned int reg)
struct i2c_client *i2c = to_i2c_client(dev);
struct adv7511 *adv7511 = i2c_get_clientdata(i2c);

- if (adv7511->type == ADV7533)
+ if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
reg -= ADV7533_REG_CEC_OFFSET;

switch (reg) {
@@ -994,7 +995,7 @@ static int adv7511_init_cec_regmap(struct adv7511 *adv)
goto err;
}

- if (adv->type == ADV7533) {
+ if (adv->type == ADV7533 || adv->type == ADV7535) {
ret = adv7533_patch_cec_registers(adv);
if (ret)
goto err;
@@ -1094,8 +1095,9 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
struct adv7511_link_config link_config;
struct adv7511 *adv7511;
struct device *dev = &i2c->dev;
+ struct regulator *reg_v1p2;
unsigned int val;
- int ret;
+ int ret, reg_v1p2_uV;

if (!dev->of_node)
return -EINVAL;
@@ -1163,6 +1165,17 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
if (ret)
goto uninit_regulators;

+ if (adv7511->type == ADV7533) {
+ reg_v1p2 = adv7511->supplies[5].consumer;
+ reg_v1p2_uV = regulator_get_voltage(reg_v1p2);
+
+ if (reg_v1p2_uV == 1200000) {
+ regmap_update_bits(adv7511->regmap,
+ ADV7533_REG_SUPPLY_SELECT, ADV7533_V1P2_ENABLE,
+ ADV7533_V1P2_ENABLE);
+ }
+ }
+
adv7511_packet_disable(adv7511, 0xffff);

adv7511->i2c_edid = i2c_new_ancillary_device(i2c, "edid",
@@ -1242,7 +1255,7 @@ static int adv7511_remove(struct i2c_client *i2c)
{
struct adv7511 *adv7511 = i2c_get_clientdata(i2c);

- if (adv7511->type == ADV7533)
+ if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
adv7533_detach_dsi(adv7511);
i2c_unregister_device(adv7511->i2c_cec);
if (adv7511->cec_clk)
@@ -1266,9 +1279,8 @@ static const struct i2c_device_id adv7511_i2c_ids[] = {
{ "adv7511", ADV7511 },
{ "adv7511w", ADV7511 },
{ "adv7513", ADV7511 },
-#ifdef CONFIG_DRM_I2C_ADV7533
{ "adv7533", ADV7533 },
-#endif
+ { "adv7535", ADV7535 },
{ }
};
MODULE_DEVICE_TABLE(i2c, adv7511_i2c_ids);
@@ -1277,9 +1289,8 @@ static const struct of_device_id adv7511_of_ids[] = {
{ .compatible = "adi,adv7511", .data = (void *)ADV7511 },
{ .compatible = "adi,adv7511w", .data = (void *)ADV7511 },
{ .compatible = "adi,adv7513", .data = (void *)ADV7511 },
-#ifdef CONFIG_DRM_I2C_ADV7533
{ .compatible = "adi,adv7533", .data = (void *)ADV7533 },
-#endif
+ { .compatible = "adi,adv7535", .data = (void *)ADV7535 },
{ }
};
MODULE_DEVICE_TABLE(of, adv7511_of_ids);
--
2.23.0

2019-11-28 16:08:22

by Togorean, Bogdan

[permalink] [raw]
Subject: [PATCH v3 1/2] dt-bindings: drm: bridge: adv7511: Add ADV7535 support

ADV7535 is a part compatible with ADV7533 but it supports 1080p@60hz and
v1p2 supply is fixed to 1.8V

Signed-off-by: Bogdan Togorean <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
---
.../bindings/display/bridge/adi,adv7511.txt | 23 ++++++++++---------
1 file changed, 12 insertions(+), 11 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
index 2c887536258c..e8ddec5d9d91 100644
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
@@ -1,10 +1,10 @@
-Analog Device ADV7511(W)/13/33 HDMI Encoders
+Analog Device ADV7511(W)/13/33/35 HDMI Encoders
-----------------------------------------

-The ADV7511, ADV7511W, ADV7513 and ADV7533 are HDMI audio and video transmitters
-compatible with HDMI 1.4 and DVI 1.0. They support color space conversion,
-S/PDIF, CEC and HDCP. ADV7533 supports the DSI interface for input pixels, while
-the others support RGB interface.
+The ADV7511, ADV7511W, ADV7513, ADV7533 and ADV7535 are HDMI audio and video
+transmitters compatible with HDMI 1.4 and DVI 1.0. They support color space
+conversion, S/PDIF, CEC and HDCP. ADV7533/5 supports the DSI interface for input
+pixels, while the others support RGB interface.

Required properties:

@@ -13,6 +13,7 @@ Required properties:
"adi,adv7511w"
"adi,adv7513"
"adi,adv7533"
+ "adi,adv7535"

- reg: I2C slave addresses
The ADV7511 internal registers are split into four pages exposed through
@@ -52,14 +53,14 @@ The following input format properties are required except in "rgb 1x" and
- bgvdd-supply: A 1.8V supply that powers up the BGVDD pin. This is
needed only for ADV7511.

-The following properties are required for ADV7533:
+The following properties are required for ADV7533 and ADV7535:

- adi,dsi-lanes: Number of DSI data lanes connected to the DSI host. It should
be one of 1, 2, 3 or 4.
- a2vdd-supply: 1.8V supply that powers up the A2VDD pin on the chip.
- v3p3-supply: A 3.3V supply that powers up the V3P3 pin on the chip.
- v1p2-supply: A supply that powers up the V1P2 pin on the chip. It can be
- either 1.2V or 1.8V.
+ either 1.2V or 1.8V for ADV7533 but only 1.8V for ADV7535.

Optional properties:

@@ -71,9 +72,9 @@ Optional properties:
- adi,embedded-sync: The input uses synchronization signals embedded in the
data stream (similar to BT.656). Defaults to separate H/V synchronization
signals.
-- adi,disable-timing-generator: Only for ADV7533. Disables the internal timing
- generator. The chip will rely on the sync signals in the DSI data lanes,
- rather than generate its own timings for HDMI output.
+- adi,disable-timing-generator: Only for ADV7533 and ADV7535. Disables the
+ internal timing generator. The chip will rely on the sync signals in the
+ DSI data lanes, rather than generate its own timings for HDMI output.
- clocks: from common clock binding: reference to the CEC clock.
- clock-names: from common clock binding: must be "cec".
- reg-names : Names of maps with programmable addresses.
@@ -85,7 +86,7 @@ Required nodes:
The ADV7511 has two video ports. Their connections are modelled using the OF
graph bindings specified in Documentation/devicetree/bindings/graph.txt.

-- Video port 0 for the RGB, YUV or DSI input. In the case of ADV7533, the
+- Video port 0 for the RGB, YUV or DSI input. In the case of ADV7533/5, the
remote endpoint phandle should be a reference to a valid mipi_dsi_host device
node.
- Video port 1 for the HDMI output
--
2.23.0