Add Device Trees for Realtek RTD1395 SoC and Banana Pi BPi-M4 SBC.
For now reuse RTD1295 reset constants.
Signed-off-by: Andreas Färber <[email protected]>
---
To be followed up by patch unshadowing more RAM from /soc 0x98000000..0xffffffff,
once we know the higher RAM windows.
v1 -> v2:
* Fixed r-bus size from 0x100000 to 0x200000 (James)
* Changed #address-cells and #size-cells from 2 to 1 (James)
* Carved out boot ROM from /memory and added it to /soc ranges (Rob/James)
arch/arm64/boot/dts/realtek/Makefile | 2 +
arch/arm64/boot/dts/realtek/rtd1395-bpi-m4.dts | 30 ++++++
arch/arm64/boot/dts/realtek/rtd1395.dtsi | 65 +++++++++++
arch/arm64/boot/dts/realtek/rtd139x.dtsi | 142 +++++++++++++++++++++++++
4 files changed, 239 insertions(+)
create mode 100644 arch/arm64/boot/dts/realtek/rtd1395-bpi-m4.dts
create mode 100644 arch/arm64/boot/dts/realtek/rtd1395.dtsi
create mode 100644 arch/arm64/boot/dts/realtek/rtd139x.dtsi
diff --git a/arch/arm64/boot/dts/realtek/Makefile b/arch/arm64/boot/dts/realtek/Makefile
index fb5f05978ecc..f614080b5e27 100644
--- a/arch/arm64/boot/dts/realtek/Makefile
+++ b/arch/arm64/boot/dts/realtek/Makefile
@@ -8,4 +8,6 @@ dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-zidoo-x9s.dtb
dtb-$(CONFIG_ARCH_REALTEK) += rtd1296-ds418.dtb
+dtb-$(CONFIG_ARCH_REALTEK) += rtd1395-bpi-m4.dtb
+
dtb-$(CONFIG_ARCH_REALTEK) += rtd1619-mjolnir.dtb
diff --git a/arch/arm64/boot/dts/realtek/rtd1395-bpi-m4.dts b/arch/arm64/boot/dts/realtek/rtd1395-bpi-m4.dts
new file mode 100644
index 000000000000..9891967d1315
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1395-bpi-m4.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2019 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "rtd1395.dtsi"
+
+/ {
+ compatible = "bananapi,bpi-m4", "realtek,rtd1395";
+ model = "Banana Pi BPI-M4";
+
+ memory@2f000 {
+ device_type = "memory";
+ reg = <0x2f000 0x3ffd1000>; /* boot ROM to 1 GiB or 2 GiB */
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1395.dtsi b/arch/arm64/boot/dts/realtek/rtd1395.dtsi
new file mode 100644
index 000000000000..05c9216a87ee
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1395.dtsi
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Realtek RTD1395 SoC
+ *
+ * Copyright (c) 2019 Andreas Färber
+ */
+
+#include "rtd139x.dtsi"
+
+/ {
+ compatible = "realtek,rtd1395";
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x0>;
+ next-level-cache = <&l2>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x1>;
+ next-level-cache = <&l2>;
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x2>;
+ next-level-cache = <&l2>;
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x3>;
+ next-level-cache = <&l2>;
+ };
+
+ l2: l2-cache {
+ compatible = "cache";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+};
+
+&arm_pmu {
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd139x.dtsi b/arch/arm64/boot/dts/realtek/rtd139x.dtsi
new file mode 100644
index 000000000000..c11a505e43e2
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd139x.dtsi
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Realtek RTD1395 SoC family
+ *
+ * Copyright (c) 2019 Andreas Färber
+ */
+
+/memreserve/ 0x0000000000000000 0x000000000002f000;
+/memreserve/ 0x000000000002f000 0x00000000000d1000;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/realtek,rtd1295.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ rpc_comm: rpc@2f000 {
+ reg = <0x2f000 0x1000>;
+ };
+
+ rpc_ringbuf: rpc@1ffe000 {
+ reg = <0x1ffe000 0x4000>;
+ };
+
+ tee: tee@10100000 {
+ reg = <0x10100000 0xf00000>;
+ no-map;
+ };
+ };
+
+ arm_pmu: arm-pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ osc27M: osc {
+ compatible = "fixed-clock";
+ clock-frequency = <27000000>;
+ #clock-cells = <0>;
+ clock-output-names = "osc27M";
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00000000 0x0001f000>, /* boot ROM */
+ <0x98000000 0x98000000 0x68000000>;
+
+ rbus: bus@98000000 {
+ compatible = "simple-bus";
+ reg = <0x98000000 0x200000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x98000000 0x200000>;
+
+ reset1: reset-controller@0 {
+ compatible = "snps,dw-low-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ };
+
+ reset2: reset-controller@4 {
+ compatible = "snps,dw-low-reset";
+ reg = <0x4 0x4>;
+ #reset-cells = <1>;
+ };
+
+ reset3: reset-controller@8 {
+ compatible = "snps,dw-low-reset";
+ reg = <0x8 0x4>;
+ #reset-cells = <1>;
+ };
+
+ reset4: reset-controller@50 {
+ compatible = "snps,dw-low-reset";
+ reg = <0x50 0x4>;
+ #reset-cells = <1>;
+ };
+
+ iso_reset: reset-controller@7088 {
+ compatible = "snps,dw-low-reset";
+ reg = <0x7088 0x4>;
+ #reset-cells = <1>;
+ };
+
+ wdt: watchdog@7680 {
+ compatible = "realtek,rtd1295-watchdog";
+ reg = <0x7680 0x100>;
+ clocks = <&osc27M>;
+ };
+
+ uart0: serial@7800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x7800 0x400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <27000000>;
+ resets = <&iso_reset RTD1295_ISO_RSTN_UR0>;
+ status = "disabled";
+ };
+
+ uart1: serial@1b200 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x1b200 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <432000000>;
+ resets = <&reset2 RTD1295_RSTN_UR1>;
+ status = "disabled";
+ };
+
+ uart2: serial@1b400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x1b400 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <432000000>;
+ resets = <&reset2 RTD1295_RSTN_UR2>;
+ status = "disabled";
+ };
+ };
+
+ gic: interrupt-controller@ff011000 {
+ compatible = "arm,gic-400";
+ reg = <0xff011000 0x1000>,
+ <0xff012000 0x2000>,
+ <0xff014000 0x2000>,
+ <0xff016000 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+ };
+};
--
2.16.4