IEEE Std 802.1Qbu standard defined the frame preemption of port
trffic classes. User can set a value to hardware. The value will
be translated to a binary, each bit represent a traffic class.
Bit "1" means preemptable traffic class. Bit "0" means express
traffic class. MSB represent high number traffic class.
ethtool -k devname
This command would show if the tx-preemption feature is available.
If hareware set preemption feature. The property would be a fixed
value 'on' if hardware support the frame preemption. Feature would
show a fixed value 'off' if hardware don't support the frame preemption.
ethtool devname
This command would show include an item 'preemption'. A following
value '0' means all traffic classes are 'express'. A value none zero
means traffic classes preemption capabilities. The value will be
translated to a binary, each bit represent a traffic class. Bit '1'
means preemptable traffic class. Bit '0' means express traffic class.
MSB represent high number traffic class.
ethtool -s devname preemption N
This command would set which traffic classes are frame preemptable.
The value will be translated to a binary, each bit represent a
traffic class. Bit '1' means preemptable traffic class. Bit '0'
means express traffic class. MSB represent high number traffic class.
Signed-off-by: Po Liu <[email protected]>
---
ethtool-copy.h | 6 +++++-
ethtool.8.in | 8 ++++++++
ethtool.c | 18 ++++++++++++++++++
3 files changed, 31 insertions(+), 1 deletion(-)
diff --git a/ethtool-copy.h b/ethtool-copy.h
index 9afd2e6..e04bdf3 100644
--- a/ethtool-copy.h
+++ b/ethtool-copy.h
@@ -1662,6 +1662,9 @@ static __inline__ int ethtool_validate_duplex(__u8 duplex)
#define AUTONEG_DISABLE 0x00
#define AUTONEG_ENABLE 0x01
+/* Disable preemtion. */
+#define PREEMPTION_DISABLE 0x0
+
/* MDI or MDI-X status/control - if MDI/MDI_X/AUTO is set then
* the driver is required to renegotiate link
*/
@@ -1878,7 +1881,8 @@ struct ethtool_link_settings {
__s8 link_mode_masks_nwords;
__u8 transceiver;
__u8 reserved1[3];
- __u32 reserved[7];
+ __u32 preemption;
+ __u32 reserved[6];
__u32 link_mode_masks[0];
/* layout of link_mode_masks fields:
* __u32 map_supported[link_mode_masks_nwords];
diff --git a/ethtool.8.in b/ethtool.8.in
index 062695a..7d612b2 100644
--- a/ethtool.8.in
+++ b/ethtool.8.in
@@ -236,6 +236,7 @@ ethtool \- query or control network driver and hardware settings
.B2 autoneg on off
.BN advertise
.BN phyad
+.BN preemption
.B2 xcvr internal external
.RB [ wol \ \*(WO]
.RB [ sopass \ \*(MA]
@@ -703,6 +704,13 @@ lB l lB.
.BI phyad \ N
PHY address.
.TP
+.BI preemption \ N
+Set preemptable traffic classes by bits.
+.B A
+value will be translated to a binary, each bit represent a traffic class.
+Bit "1" means preemptable traffic class. Bit "0" means express traffic class.
+MSB represent high number traffic class.
+.TP
.A2 xcvr internal external
Selects transceiver type. Currently only internal and external can be
specified, in the future further types might be added.
diff --git a/ethtool.c b/ethtool.c
index acf183d..d5240f8 100644
--- a/ethtool.c
+++ b/ethtool.c
@@ -928,6 +928,12 @@ dump_link_usettings(const struct ethtool_link_usettings *link_usettings)
}
}
+ if (link_usettings->base.preemption == PREEMPTION_DISABLE)
+ fprintf(stdout, " Preemption: 0x0 (off)\n");
+ else
+ fprintf(stdout, " Preemption: 0x%x\n",
+ link_usettings->base.preemption);
+
return 0;
}
@@ -2869,6 +2875,7 @@ static int do_sset(struct cmd_context *ctx)
int port_wanted = -1;
int mdix_wanted = -1;
int autoneg_wanted = -1;
+ int preemption_wanted = -1;
int phyad_wanted = -1;
int xcvr_wanted = -1;
u32 *full_advertising_wanted = NULL;
@@ -2957,6 +2964,12 @@ static int do_sset(struct cmd_context *ctx)
} else {
exit_bad_args();
}
+ } else if (!strcmp(argp[i], "preemption")) {
+ gset_changed = 1;
+ i += 1;
+ if (i >= argc)
+ exit_bad_args();
+ preemption_wanted = get_u32(argp[i], 16);
} else if (!strcmp(argp[i], "advertise")) {
gset_changed = 1;
i += 1;
@@ -3094,6 +3107,9 @@ static int do_sset(struct cmd_context *ctx)
}
if (autoneg_wanted != -1)
link_usettings->base.autoneg = autoneg_wanted;
+ if (preemption_wanted != -1)
+ link_usettings->base.preemption
+ = preemption_wanted;
if (phyad_wanted != -1)
link_usettings->base.phy_address = phyad_wanted;
if (xcvr_wanted != -1)
@@ -3186,6 +3202,8 @@ static int do_sset(struct cmd_context *ctx)
fprintf(stderr, " not setting transceiver\n");
if (mdix_wanted != -1)
fprintf(stderr, " not setting mdix\n");
+ if (preemption_wanted != -1)
+ fprintf(stderr, " not setting preemption\n");
}
}
--
2.17.1
On Wed, Nov 27, 2019 at 09:58:52AM +0000, Po Liu wrote:
Hi Po Liu,
>IEEE Std 802.1Qbu standard defined the frame preemption of port
>trffic classes. User can set a value to hardware. The value will
>be translated to a binary, each bit represent a traffic class.
>Bit "1" means preemptable traffic class. Bit "0" means express
>traffic class. MSB represent high number traffic class.
>
>ethtool -k devname
>
>This command would show if the tx-preemption feature is available.
>If hareware set preemption feature. The property would be a fixed
>value 'on' if hardware support the frame preemption. Feature would
>show a fixed value 'off' if hardware don't support the frame preemption.
>
>ethtool devname
>
>This command would show include an item 'preemption'. A following
>value '0' means all traffic classes are 'express'. A value none zero
>means traffic classes preemption capabilities. The value will be
>translated to a binary, each bit represent a traffic class. Bit '1'
>means preemptable traffic class. Bit '0' means express traffic class.
>MSB represent high number traffic class.
>
>ethtool -s devname preemption N
What about other potential parameters like MAC fragment size, mac hold?
Shouldn't be it considered along with other FP parameters to provide correct
interface later?
Say, preemption, lets name it fp-mask or frame-preemption-mask.
Then other potential setting can be similar and added later:
frame-preemption-mask
frame-preemption-fragsize
frame-preemption-machold
....
mac-hold it's rather flag, at least I've used it as priv-flag.
so can or so
frame-preemption-flags
>
>This command would set which traffic classes are frame preemptable.
>The value will be translated to a binary, each bit represent a
>traffic class. Bit '1' means preemptable traffic class. Bit '0'
>means express traffic class. MSB represent high number traffic class.
>
>Signed-off-by: Po Liu <[email protected]>
>---
> ethtool-copy.h | 6 +++++-
> ethtool.8.in | 8 ++++++++
> ethtool.c | 18 ++++++++++++++++++
> 3 files changed, 31 insertions(+), 1 deletion(-)
>
>diff --git a/ethtool-copy.h b/ethtool-copy.h
>index 9afd2e6..e04bdf3 100644
>--- a/ethtool-copy.h
>+++ b/ethtool-copy.h
>@@ -1662,6 +1662,9 @@ static __inline__ int ethtool_validate_duplex(__u8 duplex)
> #define AUTONEG_DISABLE 0x00
> #define AUTONEG_ENABLE 0x01
>
>+/* Disable preemtion. */
>+#define PREEMPTION_DISABLE 0x0
>+
> /* MDI or MDI-X status/control - if MDI/MDI_X/AUTO is set then
> * the driver is required to renegotiate link
> */
>@@ -1878,7 +1881,8 @@ struct ethtool_link_settings {
> __s8 link_mode_masks_nwords;
> __u8 transceiver;
> __u8 reserved1[3];
>- __u32 reserved[7];
>+ __u32 preemption;
>+ __u32 reserved[6];
> __u32 link_mode_masks[0];
> /* layout of link_mode_masks fields:
> * __u32 map_supported[link_mode_masks_nwords];
>diff --git a/ethtool.8.in b/ethtool.8.in
>index 062695a..7d612b2 100644
>--- a/ethtool.8.in
>+++ b/ethtool.8.in
>@@ -236,6 +236,7 @@ ethtool \- query or control network driver and hardware settings
> .B2 autoneg on off
> .BN advertise
> .BN phyad
>+.BN preemption
> .B2 xcvr internal external
> .RB [ wol \ \*(WO]
> .RB [ sopass \ \*(MA]
>@@ -703,6 +704,13 @@ lB l lB.
> .BI phyad \ N
> PHY address.
> .TP
>+.BI preemption \ N
>+Set preemptable traffic classes by bits.
>+.B A
>+value will be translated to a binary, each bit represent a traffic class.
>+Bit "1" means preemptable traffic class. Bit "0" means express traffic class.
>+MSB represent high number traffic class.
>+.TP
> .A2 xcvr internal external
> Selects transceiver type. Currently only internal and external can be
> specified, in the future further types might be added.
>diff --git a/ethtool.c b/ethtool.c
>index acf183d..d5240f8 100644
>--- a/ethtool.c
>+++ b/ethtool.c
>@@ -928,6 +928,12 @@ dump_link_usettings(const struct ethtool_link_usettings *link_usettings)
> }
> }
>
>+ if (link_usettings->base.preemption == PREEMPTION_DISABLE)
>+ fprintf(stdout, " Preemption: 0x0 (off)\n");
>+ else
>+ fprintf(stdout, " Preemption: 0x%x\n",
>+ link_usettings->base.preemption);
>+
> return 0;
> }
>
>@@ -2869,6 +2875,7 @@ static int do_sset(struct cmd_context *ctx)
> int port_wanted = -1;
> int mdix_wanted = -1;
> int autoneg_wanted = -1;
>+ int preemption_wanted = -1;
> int phyad_wanted = -1;
> int xcvr_wanted = -1;
> u32 *full_advertising_wanted = NULL;
>@@ -2957,6 +2964,12 @@ static int do_sset(struct cmd_context *ctx)
> } else {
> exit_bad_args();
> }
>+ } else if (!strcmp(argp[i], "preemption")) {
>+ gset_changed = 1;
>+ i += 1;
>+ if (i >= argc)
>+ exit_bad_args();
>+ preemption_wanted = get_u32(argp[i], 16);
> } else if (!strcmp(argp[i], "advertise")) {
> gset_changed = 1;
> i += 1;
>@@ -3094,6 +3107,9 @@ static int do_sset(struct cmd_context *ctx)
> }
> if (autoneg_wanted != -1)
> link_usettings->base.autoneg = autoneg_wanted;
>+ if (preemption_wanted != -1)
>+ link_usettings->base.preemption
>+ = preemption_wanted;
> if (phyad_wanted != -1)
> link_usettings->base.phy_address = phyad_wanted;
> if (xcvr_wanted != -1)
>@@ -3186,6 +3202,8 @@ static int do_sset(struct cmd_context *ctx)
> fprintf(stderr, " not setting transceiver\n");
> if (mdix_wanted != -1)
> fprintf(stderr, " not setting mdix\n");
>+ if (preemption_wanted != -1)
>+ fprintf(stderr, " not setting preemption\n");
> }
> }
>
>--
>2.17.1
>
--
Regards,
Ivan Khoronzhuk
Hi Po Liu,
Thanks for working on this! Some suggestion below as we are working on
adding this support to Texas Instrument's CPSW driver on AM65x family
of SoCs as well. TRM for that is provided below for your reference.
Relevant section for IET (Frame pre-emption) is
12.2.1.4.6.6.1IET Configuration
http://www.ti.com/lit/ug/spruid7d/spruid7d.pdf
On 12/03/2019 11:27 AM, Ivan Khoronzhuk wrote:
> On Wed, Nov 27, 2019 at 09:58:52AM +0000, Po Liu wrote:
>
> Hi Po Liu,
>
>> IEEE Std 802.1Qbu standard defined the frame preemption of port
>> trffic classes. User can set a value to hardware. The value will
>> be translated to a binary, each bit represent a traffic class.
>> Bit "1" means preemptable traffic class. Bit "0" means express
>> traffic class. MSB represent high number traffic class.
>>
>> ethtool -k devname
>>
>> This command would show if the tx-preemption feature is available.
>> If hareware set preemption feature. The property would be a fixed
>> value 'on' if hardware support the frame preemption. Feature would
>> show a fixed value 'off' if hardware don't support the frame preemption.
>>
>> ethtool devname
>>
>> This command would show include an item 'preemption'. A following
>> value '0' means all traffic classes are 'express'. A value none zero
>> means traffic classes preemption capabilities. The value will be
>> translated to a binary, each bit represent a traffic class. Bit '1'
>> means preemptable traffic class. Bit '0' means express traffic class.
>> MSB represent high number traffic class.
>>
>> ethtool -s devname preemption N
>
> What about other potential parameters like MAC fragment size, mac hold?
> Shouldn't be it considered along with other FP parameters to provide
> correct
> interface later?
>
> Say, preemption, lets name it fp-mask or frame-preemption-mask.
> Then other potential setting can be similar and added later:
>
> frame-preemption-mask
> frame-preemption-fragsize
> frame-preemption-machold
Need additional capabilities as described by Ivan above. Thanks Ivan!
So it would be better to use feature/sub-parameter format so that it can
be extended as needed in the future.
For express/Preemptable mask setting it becomes
ethtool -s devname frame-preemption tc-mask N
For setting min fragment size
ethtool -s devname frame-preemption min-fragsize 64
Also the device may be capable of doing Verify process to detect the
capability of neighbor device and show the status. So we should have a
way to show this status as well when user type
ethtool devname
We are working currently to add this feature to CPSW driver on AM65x
which will be upstream-ed soon. So want to have this done in an
way that we can extend it later.
Similarly for taprio, there are some parameters that user
might want to tune such as Max SDU size per tc class. I hope
we could use ethtool to set the same on a similar way.
Thanks
Murali
> ....
>
> mac-hold it's rather flag, at least I've used it as priv-flag.
> so can or so
>
> frame-preemption-flags
>
>>
>> This command would set which traffic classes are frame preemptable.
>> The value will be translated to a binary, each bit represent a
>> traffic class. Bit '1' means preemptable traffic class. Bit '0'
>> means express traffic class. MSB represent high number traffic class.
>>
>> Signed-off-by: Po Liu <[email protected]>
>> ---
>> ethtool-copy.h | 6 +++++-
>> ethtool.8.in | 8 ++++++++
>> ethtool.c | 18 ++++++++++++++++++
>> 3 files changed, 31 insertions(+), 1 deletion(-)
>>
>> diff --git a/ethtool-copy.h b/ethtool-copy.h
>> index 9afd2e6..e04bdf3 100644
>> --- a/ethtool-copy.h
>> +++ b/ethtool-copy.h
>> @@ -1662,6 +1662,9 @@ static __inline__ int
>> ethtool_validate_duplex(__u8 duplex)
>> #define AUTONEG_DISABLE 0x00
>> #define AUTONEG_ENABLE 0x01
>>
>> +/* Disable preemtion. */
>> +#define PREEMPTION_DISABLE 0x0
>> +
>> /* MDI or MDI-X status/control - if MDI/MDI_X/AUTO is set then
>> * the driver is required to renegotiate link
>> */
>> @@ -1878,7 +1881,8 @@ struct ethtool_link_settings {
>> __s8 link_mode_masks_nwords;
>> __u8 transceiver;
>> __u8 reserved1[3];
>> - __u32 reserved[7];
>> + __u32 preemption;
>> + __u32 reserved[6];
>> __u32 link_mode_masks[0];
>> /* layout of link_mode_masks fields:
>> * __u32 map_supported[link_mode_masks_nwords];
>> diff --git a/ethtool.8.in b/ethtool.8.in
>> index 062695a..7d612b2 100644
>> --- a/ethtool.8.in
>> +++ b/ethtool.8.in
>> @@ -236,6 +236,7 @@ ethtool \- query or control network driver and
>> hardware settings
>> .B2 autoneg on off
>> .BN advertise
>> .BN phyad
>> +.BN preemption
>> .B2 xcvr internal external
>> .RB [ wol \ \*(WO]
>> .RB [ sopass \ \*(MA]
>> @@ -703,6 +704,13 @@ lB l lB.
>> .BI phyad \ N
>> PHY address.
>> .TP
>> +.BI preemption \ N
>> +Set preemptable traffic classes by bits.
>> +.B A
>> +value will be translated to a binary, each bit represent a traffic
>> class.
>> +Bit "1" means preemptable traffic class. Bit "0" means express
>> traffic class.
>> +MSB represent high number traffic class.
>> +.TP
>> .A2 xcvr internal external
>> Selects transceiver type. Currently only internal and external can be
>> specified, in the future further types might be added.
>> diff --git a/ethtool.c b/ethtool.c
>> index acf183d..d5240f8 100644
>> --- a/ethtool.c
>> +++ b/ethtool.c
>> @@ -928,6 +928,12 @@ dump_link_usettings(const struct
>> ethtool_link_usettings *link_usettings)
>> }
>> }
>>
>> + if (link_usettings->base.preemption == PREEMPTION_DISABLE)
>> + fprintf(stdout, " Preemption: 0x0 (off)\n");
>> + else
>> + fprintf(stdout, " Preemption: 0x%x\n",
>> + link_usettings->base.preemption);
>> +
>> return 0;
>> }
>>
>> @@ -2869,6 +2875,7 @@ static int do_sset(struct cmd_context *ctx)
>> int port_wanted = -1;
>> int mdix_wanted = -1;
>> int autoneg_wanted = -1;
>> + int preemption_wanted = -1;
>> int phyad_wanted = -1;
>> int xcvr_wanted = -1;
>> u32 *full_advertising_wanted = NULL;
>> @@ -2957,6 +2964,12 @@ static int do_sset(struct cmd_context *ctx)
>> } else {
>> exit_bad_args();
>> }
>> + } else if (!strcmp(argp[i], "preemption")) {
>> + gset_changed = 1;
>> + i += 1;
>> + if (i >= argc)
>> + exit_bad_args();
>> + preemption_wanted = get_u32(argp[i], 16);
>> } else if (!strcmp(argp[i], "advertise")) {
>> gset_changed = 1;
>> i += 1;
>> @@ -3094,6 +3107,9 @@ static int do_sset(struct cmd_context *ctx)
>> }
>> if (autoneg_wanted != -1)
>> link_usettings->base.autoneg = autoneg_wanted;
>> + if (preemption_wanted != -1)
>> + link_usettings->base.preemption
>> + = preemption_wanted;
>> if (phyad_wanted != -1)
>> link_usettings->base.phy_address = phyad_wanted;
>> if (xcvr_wanted != -1)
>> @@ -3186,6 +3202,8 @@ static int do_sset(struct cmd_context *ctx)
>> fprintf(stderr, " not setting transceiver\n");
>> if (mdix_wanted != -1)
>> fprintf(stderr, " not setting mdix\n");
>> + if (preemption_wanted != -1)
>> + fprintf(stderr, " not setting preemption\n");
>> }
>> }
>>
>> --
>> 2.17.1
>>
>
Hi Murali, Ivan,
Thank you for your feedback. Maybe it is better to use "RFC" type for these patches for the discussion.
Br,
Po Liu
> -----Original Message-----
> From: Murali Karicheri <[email protected]>
> Sent: 2019年12月4日 1:42
> To: Po Liu <[email protected]>; [email protected];
> [email protected]; [email protected]; [email protected];
> [email protected]; [email protected];
> [email protected]; [email protected]; Claudiu Manoil
> <[email protected]>; Vladimir Oltean <[email protected]>;
> Xiaoliang Yang <[email protected]>; Roy Zang <[email protected]>;
> Mingkai Hu <[email protected]>; Jerry Huang <[email protected]>; Leo
> Li <[email protected]>
> Subject: [EXT] Re: [v1,ethtool] ethtool: add setting frame preemption of traffic
> classes
>
> Caution: EXT Email
>
> Hi Po Liu,
>
> Thanks for working on this! Some suggestion below as we are working on adding
> this support to Texas Instrument's CPSW driver on AM65x family of SoCs as well.
> TRM for that is provided below for your reference.
> Relevant section for IET (Frame pre-emption) is
>
> 12.2.1.4.6.6.1IET Configuration
>
> https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.ti.c
> om%2Flit%2Fug%2Fspruid7d%2Fspruid7d.pdf&data=02%7C01%7Cpo.liu%
> 40nxp.com%7C15544a9db1ff422e2fdf08d77817647f%7C686ea1d3bc2b4c6fa
> 92cd99c5c301635%7C0%7C1%7C637109914194485742&sdata=VD5kg%
> 2FY1SDDWjwMZHjgUNlFrcvXnDvdIPGblWkx4DXs%3D&reserved=0
>
> On 12/03/2019 11:27 AM, Ivan Khoronzhuk wrote:
> > On Wed, Nov 27, 2019 at 09:58:52AM +0000, Po Liu wrote:
> >
> > Hi Po Liu,
> >
> >> IEEE Std 802.1Qbu standard defined the frame preemption of port
> >> trffic classes. User can set a value to hardware. The value will be
> >> translated to a binary, each bit represent a traffic class.
> >> Bit "1" means preemptable traffic class. Bit "0" means express
> >> traffic class. MSB represent high number traffic class.
> >>
> >> ethtool -k devname
> >>
> >> This command would show if the tx-preemption feature is available.
> >> If hareware set preemption feature. The property would be a fixed
> >> value 'on' if hardware support the frame preemption. Feature would
> >> show a fixed value 'off' if hardware don't support the frame preemption.
> >>
> >> ethtool devname
> >>
> >> This command would show include an item 'preemption'. A following
> >> value '0' means all traffic classes are 'express'. A value none zero
> >> means traffic classes preemption capabilities. The value will be
> >> translated to a binary, each bit represent a traffic class. Bit '1'
> >> means preemptable traffic class. Bit '0' means express traffic class.
> >> MSB represent high number traffic class.
> >>
> >> ethtool -s devname preemption N
> >
> > What about other potential parameters like MAC fragment size, mac hold?
> > Shouldn't be it considered along with other FP parameters to provide
> > correct interface later?
> >
> > Say, preemption, lets name it fp-mask or frame-preemption-mask.
> > Then other potential setting can be similar and added later:
> >
> > frame-preemption-mask
> > frame-preemption-fragsize
> > frame-preemption-machold
> Need additional capabilities as described by Ivan above. Thanks Ivan!
>
> So it would be better to use feature/sub-parameter format so that it can be
> extended as needed in the future.
>
> For express/Preemptable mask setting it becomes
>
> ethtool -s devname frame-preemption tc-mask N
>
> For setting min fragment size
>
> ethtool -s devname frame-preemption min-fragsize 64
>
I thought the fragment size set 64 is enough for Qbv. Anyway, if you prefer more details setting. I think it is better to set a specific serial type. For example, '-p' for set tc-mask N and min-fragsize 64, '-P' for status.
> Also the device may be capable of doing Verify process to detect the capability
> of neighbor device and show the status. So we should have a way to show this
The verify process maybe disabled as default.
> status as well when user type
>
> ethtool devname
>
> We are working currently to add this feature to CPSW driver on AM65x which
> will be upstream-ed soon. So want to have this done in an way that we can
> extend it later.
> Similarly for taprio, there are some parameters that user might want to tune
> such as Max SDU size per tc class. I hope we could use ethtool to set the same
> on a similar way.
Furthermore, this setting could be extend for a serial setting for mac and traffic class.
>
> Thanks
>
> Murali
>
> > ....
> >
> > mac-hold it's rather flag, at least I've used it as priv-flag.
> > so can or so
> >
> > frame-preemption-flags
> >
> >>
> >> This command would set which traffic classes are frame preemptable.
> >> The value will be translated to a binary, each bit represent a
> >> traffic class. Bit '1' means preemptable traffic class. Bit '0'
> >> means express traffic class. MSB represent high number traffic class.
> >>
> >> Signed-off-by: Po Liu <[email protected]>
> >> ---
> >> ethtool-copy.h | 6 +++++-
> >> ethtool.8.in | 8 ++++++++
> >> ethtool.c | 18 ++++++++++++++++++
> >> 3 files changed, 31 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/ethtool-copy.h b/ethtool-copy.h index 9afd2e6..e04bdf3
> >> 100644
> >> --- a/ethtool-copy.h
> >> +++ b/ethtool-copy.h
> >> @@ -1662,6 +1662,9 @@ static __inline__ int
> >> ethtool_validate_duplex(__u8 duplex)
> >> #define AUTONEG_DISABLE 0x00
> >> #define AUTONEG_ENABLE 0x01
> >>
> >> +/* Disable preemtion. */
> >> +#define PREEMPTION_DISABLE 0x0
> >> +
> >> /* MDI or MDI-X status/control - if MDI/MDI_X/AUTO is set then
> >> * the driver is required to renegotiate link */ @@ -1878,7 +1881,8
> >> @@ struct ethtool_link_settings {
> >> __s8 link_mode_masks_nwords;
> >> __u8 transceiver;
> >> __u8 reserved1[3];
> >> - __u32 reserved[7];
> >> + __u32 preemption;
> >> + __u32 reserved[6];
> >> __u32 link_mode_masks[0];
> >> /* layout of link_mode_masks fields:
> >> * __u32 map_supported[link_mode_masks_nwords];
> >> diff --git a/ethtool.8.in b/ethtool.8.in index 062695a..7d612b2
> >> 100644
> >> --- a/ethtool.8.in
> >> +++ b/ethtool.8.in
> >> @@ -236,6 +236,7 @@ ethtool \- query or control network driver and
> >> hardware settings
> >> .B2 autoneg on off
> >> .BN advertise
> >> .BN phyad
> >> +.BN preemption
> >> .B2 xcvr internal external
> >> .RB [ wol \ \*(WO]
> >> .RB [ sopass \ \*(MA]
> >> @@ -703,6 +704,13 @@ lB l lB.
> >> .BI phyad \ N
> >> PHY address.
> >> .TP
> >> +.BI preemption \ N
> >> +Set preemptable traffic classes by bits.
> >> +.B A
> >> +value will be translated to a binary, each bit represent a traffic
> >> class.
> >> +Bit "1" means preemptable traffic class. Bit "0" means express
> >> traffic class.
> >> +MSB represent high number traffic class.
> >> +.TP
> >> .A2 xcvr internal external
> >> Selects transceiver type. Currently only internal and external can be
> >> specified, in the future further types might be added.
> >> diff --git a/ethtool.c b/ethtool.c
> >> index acf183d..d5240f8 100644
> >> --- a/ethtool.c
> >> +++ b/ethtool.c
> >> @@ -928,6 +928,12 @@ dump_link_usettings(const struct
> >> ethtool_link_usettings *link_usettings)
> >> }
> >> }
> >>
> >> + if (link_usettings->base.preemption == PREEMPTION_DISABLE)
> >> + fprintf(stdout, " Preemption: 0x0 (off)\n");
> >> + else
> >> + fprintf(stdout, " Preemption: 0x%x\n",
> >> + link_usettings->base.preemption);
> >> +
> >> return 0;
> >> }
> >>
> >> @@ -2869,6 +2875,7 @@ static int do_sset(struct cmd_context *ctx)
> >> int port_wanted = -1;
> >> int mdix_wanted = -1;
> >> int autoneg_wanted = -1;
> >> + int preemption_wanted = -1;
> >> int phyad_wanted = -1;
> >> int xcvr_wanted = -1;
> >> u32 *full_advertising_wanted = NULL; @@ -2957,6 +2964,12 @@
> >> static int do_sset(struct cmd_context *ctx)
> >> } else {
> >> exit_bad_args();
> >> }
> >> + } else if (!strcmp(argp[i], "preemption")) {
> >> + gset_changed = 1;
> >> + i += 1;
> >> + if (i >= argc)
> >> + exit_bad_args();
> >> + preemption_wanted = get_u32(argp[i], 16);
> >> } else if (!strcmp(argp[i], "advertise")) {
> >> gset_changed = 1;
> >> i += 1;
> >> @@ -3094,6 +3107,9 @@ static int do_sset(struct cmd_context *ctx)
> >> }
> >> if (autoneg_wanted != -1)
> >> link_usettings->base.autoneg = autoneg_wanted;
> >> + if (preemption_wanted != -1)
> >> + link_usettings->base.preemption
> >> + = preemption_wanted;
> >> if (phyad_wanted != -1)
> >> link_usettings->base.phy_address = phyad_wanted;
> >> if (xcvr_wanted != -1)
> >> @@ -3186,6 +3202,8 @@ static int do_sset(struct cmd_context *ctx)
> >> fprintf(stderr, " not setting transceiver\n");
> >> if (mdix_wanted != -1)
> >> fprintf(stderr, " not setting mdix\n");
> >> + if (preemption_wanted != -1)
> >> + fprintf(stderr, " not setting preemption\n");
> >> }
> >> }
> >>
> >> --
> >> 2.17.1
> >>
> >
On 12/04/2019 03:14 AM, Po Liu wrote:
> Hi Murali, Ivan,
>
> Thank you for your feedback. Maybe it is better to use "RFC" type for these patches for the discussion.
>
Yes please.
Murali
>
> Br,
> Po Liu
>
>> -----Original Message-----
>> From: Murali Karicheri <[email protected]>
>> Sent: 2019年12月4日 1:42
>> To: Po Liu <[email protected]>; [email protected];
>> [email protected]; [email protected]; [email protected];
>> [email protected]; [email protected];
>> [email protected]; [email protected]; Claudiu Manoil
>> <[email protected]>; Vladimir Oltean <[email protected]>;
>> Xiaoliang Yang <[email protected]>; Roy Zang <[email protected]>;
>> Mingkai Hu <[email protected]>; Jerry Huang <[email protected]>; Leo
>> Li <[email protected]>
>> Subject: [EXT] Re: [v1,ethtool] ethtool: add setting frame preemption of traffic
>> classes
>>
>> Caution: EXT Email
>>
>> Hi Po Liu,
>>
>> Thanks for working on this! Some suggestion below as we are working on adding
>> this support to Texas Instrument's CPSW driver on AM65x family of SoCs as well.
>> TRM for that is provided below for your reference.
>> Relevant section for IET (Frame pre-emption) is
>>
>> 12.2.1.4.6.6.1IET Configuration
>>
>> https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.ti.c
>> om%2Flit%2Fug%2Fspruid7d%2Fspruid7d.pdf&data=02%7C01%7Cpo.liu%
>> 40nxp.com%7C15544a9db1ff422e2fdf08d77817647f%7C686ea1d3bc2b4c6fa
>> 92cd99c5c301635%7C0%7C1%7C637109914194485742&sdata=VD5kg%
>> 2FY1SDDWjwMZHjgUNlFrcvXnDvdIPGblWkx4DXs%3D&reserved=0
>>
>> On 12/03/2019 11:27 AM, Ivan Khoronzhuk wrote:
>>> On Wed, Nov 27, 2019 at 09:58:52AM +0000, Po Liu wrote:
>>>
>>> Hi Po Liu,
>>>
>>>> IEEE Std 802.1Qbu standard defined the frame preemption of port
>>>> trffic classes. User can set a value to hardware. The value will be
>>>> translated to a binary, each bit represent a traffic class.
>>>> Bit "1" means preemptable traffic class. Bit "0" means express
>>>> traffic class. MSB represent high number traffic class.
>>>>
>>>> ethtool -k devname
>>>>
>>>> This command would show if the tx-preemption feature is available.
>>>> If hareware set preemption feature. The property would be a fixed
>>>> value 'on' if hardware support the frame preemption. Feature would
>>>> show a fixed value 'off' if hardware don't support the frame preemption.
>>>>
>>>> ethtool devname
>>>>
>>>> This command would show include an item 'preemption'. A following
>>>> value '0' means all traffic classes are 'express'. A value none zero
>>>> means traffic classes preemption capabilities. The value will be
>>>> translated to a binary, each bit represent a traffic class. Bit '1'
>>>> means preemptable traffic class. Bit '0' means express traffic class.
>>>> MSB represent high number traffic class.
>>>>
>>>> ethtool -s devname preemption N
>>>
>>> What about other potential parameters like MAC fragment size, mac hold?
>>> Shouldn't be it considered along with other FP parameters to provide
>>> correct interface later?
>>>
>>> Say, preemption, lets name it fp-mask or frame-preemption-mask.
>>> Then other potential setting can be similar and added later:
>>>
>>> frame-preemption-mask
>>> frame-preemption-fragsize
>>> frame-preemption-machold
>> Need additional capabilities as described by Ivan above. Thanks Ivan!
>>
>> So it would be better to use feature/sub-parameter format so that it can be
>> extended as needed in the future.
>>
>> For express/Preemptable mask setting it becomes
>>
>> ethtool -s devname frame-preemption tc-mask N
>>
>> For setting min fragment size
>>
>> ethtool -s devname frame-preemption min-fragsize 64
>>
>
> I thought the fragment size set 64 is enough for Qbv. Anyway, if you prefer more details setting. I think it is better to set a specific serial type. For example, '-p' for set tc-mask N and min-fragsize 64, '-P' for status.
>
>> Also the device may be capable of doing Verify process to detect the capability
>> of neighbor device and show the status. So we should have a way to show this
>
> The verify process maybe disabled as default.
>
>> status as well when user type
>>
>> ethtool devname
>>
>> We are working currently to add this feature to CPSW driver on AM65x which
>> will be upstream-ed soon. So want to have this done in an way that we can
>> extend it later.
>> Similarly for taprio, there are some parameters that user might want to tune
>> such as Max SDU size per tc class. I hope we could use ethtool to set the same
>> on a similar way.
>
> Furthermore, this setting could be extend for a serial setting for mac and traffic class.
>
>>
>> Thanks
>>
>> Murali
>>
>>> ....
>>>
>>> mac-hold it's rather flag, at least I've used it as priv-flag.
>>> so can or so
>>>
>>> frame-preemption-flags
>>>
>>>>
>>>> This command would set which traffic classes are frame preemptable.
>>>> The value will be translated to a binary, each bit represent a
>>>> traffic class. Bit '1' means preemptable traffic class. Bit '0'
>>>> means express traffic class. MSB represent high number traffic class.
>>>>
>>>> Signed-off-by: Po Liu <[email protected]>
>>>> ---
>>>> ethtool-copy.h | 6 +++++-
>>>> ethtool.8.in | 8 ++++++++
>>>> ethtool.c | 18 ++++++++++++++++++
>>>> 3 files changed, 31 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/ethtool-copy.h b/ethtool-copy.h index 9afd2e6..e04bdf3
>>>> 100644
>>>> --- a/ethtool-copy.h
>>>> +++ b/ethtool-copy.h
>>>> @@ -1662,6 +1662,9 @@ static __inline__ int
>>>> ethtool_validate_duplex(__u8 duplex)
>>>> #define AUTONEG_DISABLE 0x00
>>>> #define AUTONEG_ENABLE 0x01
>>>>
>>>> +/* Disable preemtion. */
>>>> +#define PREEMPTION_DISABLE 0x0
>>>> +
>>>> /* MDI or MDI-X status/control - if MDI/MDI_X/AUTO is set then
>>>> * the driver is required to renegotiate link */ @@ -1878,7 +1881,8
>>>> @@ struct ethtool_link_settings {
>>>> __s8 link_mode_masks_nwords;
>>>> __u8 transceiver;
>>>> __u8 reserved1[3];
>>>> - __u32 reserved[7];
>>>> + __u32 preemption;
>>>> + __u32 reserved[6];
>>>> __u32 link_mode_masks[0];
>>>> /* layout of link_mode_masks fields:
>>>> * __u32 map_supported[link_mode_masks_nwords];
>>>> diff --git a/ethtool.8.in b/ethtool.8.in index 062695a..7d612b2
>>>> 100644
>>>> --- a/ethtool.8.in
>>>> +++ b/ethtool.8.in
>>>> @@ -236,6 +236,7 @@ ethtool \- query or control network driver and
>>>> hardware settings
>>>> .B2 autoneg on off
>>>> .BN advertise
>>>> .BN phyad
>>>> +.BN preemption
>>>> .B2 xcvr internal external
>>>> .RB [ wol \ \*(WO]
>>>> .RB [ sopass \ \*(MA]
>>>> @@ -703,6 +704,13 @@ lB l lB.
>>>> .BI phyad \ N
>>>> PHY address.
>>>> .TP
>>>> +.BI preemption \ N
>>>> +Set preemptable traffic classes by bits.
>>>> +.B A
>>>> +value will be translated to a binary, each bit represent a traffic
>>>> class.
>>>> +Bit "1" means preemptable traffic class. Bit "0" means express
>>>> traffic class.
>>>> +MSB represent high number traffic class.
>>>> +.TP
>>>> .A2 xcvr internal external
>>>> Selects transceiver type. Currently only internal and external can be
>>>> specified, in the future further types might be added.
>>>> diff --git a/ethtool.c b/ethtool.c
>>>> index acf183d..d5240f8 100644
>>>> --- a/ethtool.c
>>>> +++ b/ethtool.c
>>>> @@ -928,6 +928,12 @@ dump_link_usettings(const struct
>>>> ethtool_link_usettings *link_usettings)
>>>> }
>>>> }
>>>>
>>>> + if (link_usettings->base.preemption == PREEMPTION_DISABLE)
>>>> + fprintf(stdout, " Preemption: 0x0 (off)\n");
>>>> + else
>>>> + fprintf(stdout, " Preemption: 0x%x\n",
>>>> + link_usettings->base.preemption);
>>>> +
>>>> return 0;
>>>> }
>>>>
>>>> @@ -2869,6 +2875,7 @@ static int do_sset(struct cmd_context *ctx)
>>>> int port_wanted = -1;
>>>> int mdix_wanted = -1;
>>>> int autoneg_wanted = -1;
>>>> + int preemption_wanted = -1;
>>>> int phyad_wanted = -1;
>>>> int xcvr_wanted = -1;
>>>> u32 *full_advertising_wanted = NULL; @@ -2957,6 +2964,12 @@
>>>> static int do_sset(struct cmd_context *ctx)
>>>> } else {
>>>> exit_bad_args();
>>>> }
>>>> + } else if (!strcmp(argp[i], "preemption")) {
>>>> + gset_changed = 1;
>>>> + i += 1;
>>>> + if (i >= argc)
>>>> + exit_bad_args();
>>>> + preemption_wanted = get_u32(argp[i], 16);
>>>> } else if (!strcmp(argp[i], "advertise")) {
>>>> gset_changed = 1;
>>>> i += 1;
>>>> @@ -3094,6 +3107,9 @@ static int do_sset(struct cmd_context *ctx)
>>>> }
>>>> if (autoneg_wanted != -1)
>>>> link_usettings->base.autoneg = autoneg_wanted;
>>>> + if (preemption_wanted != -1)
>>>> + link_usettings->base.preemption
>>>> + = preemption_wanted;
>>>> if (phyad_wanted != -1)
>>>> link_usettings->base.phy_address = phyad_wanted;
>>>> if (xcvr_wanted != -1)
>>>> @@ -3186,6 +3202,8 @@ static int do_sset(struct cmd_context *ctx)
>>>> fprintf(stderr, " not setting transceiver\n");
>>>> if (mdix_wanted != -1)
>>>> fprintf(stderr, " not setting mdix\n");
>>>> + if (preemption_wanted != -1)
>>>> + fprintf(stderr, " not setting preemption\n");
>>>> }
>>>> }
>>>>
>>>> --
>>>> 2.17.1
>>>>
>>>
>