From: Chen-Yu Tsai <[email protected]>
A copy-paste error was introduced when bitmasks were converted to
macros, incorrectly setting the enable bitmask for ELDO2 to the one
for ELDO1 for the AXP22x units.
Fix it by using the correct macro.
On affected boards, ELDO1 and/or ELDO2 are used to power the camera,
which is currently unsupported.
Fixes: db4a555f7c4c ("regulator: axp20x: use defines for masks")
Signed-off-by: Chen-Yu Tsai <[email protected]>
---
Small fix. I prefer to have this merged sooner, i.e. not into -next.
Later patches (to be posted) supporting the camera sensor interface
depend on this at runtime to power on the camera correctly.
---
drivers/regulator/axp20x-regulator.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index 989506bd90b1..fe369cba34fb 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -605,7 +605,7 @@ static const struct regulator_desc axp22x_regulators[] = {
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_ELDO1_MASK),
AXP_DESC(AXP22X, ELDO2, "eldo2", "eldoin", 700, 3300, 100,
AXP22X_ELDO2_V_OUT, AXP22X_ELDO2_V_OUT_MASK,
- AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_ELDO1_MASK),
+ AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_ELDO2_MASK),
AXP_DESC(AXP22X, ELDO3, "eldo3", "eldoin", 700, 3300, 100,
AXP22X_ELDO3_V_OUT, AXP22X_ELDO3_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_ELDO3_MASK),
--
2.24.0