2019-11-21 16:14:05

by Amelie Delaunay

Subject: [PATCH 0/5] USB support on stm32mp157 boards

This patchset adds support for USB (Host and OTG) on stm32mp157a-dk1.
USB OTG HS is forced in Peripheral mode.
This patchset also fixes USB on stm32mp157c-ev1: USB PHYS supplies were missing
(CONFIG_REGULATOR_STM32_PWR) and usbotg_hs node requires phy-names property to
get the phy.

Amelie Delaunay (5):
ARM: multi_v7_defconfig: enable STM32 PWR regulator
ARM: dts: stm32: enable USBPHYC on stm32mp157a-dk1
ARM: dts: stm32: enable USB Host (USBH) EHCI controller on
stm32mp157a-dk1
ARM: dts: stm32: enable USB OTG HS on stm32mp157a-dk1
ARM: dts: stm32: add phy-names to usbotg_hs on stm32mp157c-ev1

arch/arm/boot/dts/stm32mp157a-dk1.dts | 28 +++++++++++++++++++++++++++
arch/arm/boot/dts/stm32mp157c-ev1.dts | 1 +
arch/arm/configs/multi_v7_defconfig | 1 +
3 files changed, 30 insertions(+)

--
2.17.1

2019-12-05 22:31:14

by Aurelien Jarno

Subject: Re: [PATCH 0/5] USB support on stm32mp157 boards

On 2019-11-21 17:11, Amelie Delaunay wrote:
> This patchset adds support for USB (Host and OTG) on stm32mp157a-dk1.
> USB OTG HS is forced in Peripheral mode.
> This patchset also fixes USB on stm32mp157c-ev1: USB PHYS supplies were missing
> (CONFIG_REGULATOR_STM32_PWR) and usbotg_hs node requires phy-names property to
> get the phy.
>
> Amelie Delaunay (5):
> ARM: multi_v7_defconfig: enable STM32 PWR regulator
> ARM: dts: stm32: enable USBPHYC on stm32mp157a-dk1
> ARM: dts: stm32: enable USB Host (USBH) EHCI controller on
> stm32mp157a-dk1
> ARM: dts: stm32: enable USB OTG HS on stm32mp157a-dk1
> ARM: dts: stm32: add phy-names to usbotg_hs on stm32mp157c-ev1
>
> arch/arm/boot/dts/stm32mp157a-dk1.dts | 28 +++++++++++++++++++++++++++
> arch/arm/boot/dts/stm32mp157c-ev1.dts | 1 +
> arch/arm/configs/multi_v7_defconfig | 1 +
> 3 files changed, 30 insertions(+)

I tested the series on a stm32mp157c-dk2.

Tested-by: Aurelien Jarno <[email protected]>

--
Aurelien Jarno GPG: 4096R/1DDD8C9B
[email protected] http://www.aurel32.net