From: Dariusz Marcinkiewicz <[email protected]>
[ Upstream commit 66c2dee4ae10a2d841c40b9dd9c7141eb23eee76 ]
Fill in the connector info, allowing userspace to associate
the CEC device with the drm connector.
Tested on a Raspberry Pi 3B.
Signed-off-by: Dariusz Marcinkiewicz <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Tested-by: Hans Verkuil <[email protected]>
Acked-by: Eric Anholt <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index ee7d4e7b0ee33..0853b980bcb31 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1285,6 +1285,9 @@ static const struct cec_adap_ops vc4_hdmi_cec_adap_ops = {
static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
{
+#ifdef CONFIG_DRM_VC4_HDMI_CEC
+ struct cec_connector_info conn_info;
+#endif
struct platform_device *pdev = to_platform_device(dev);
struct drm_device *drm = dev_get_drvdata(master);
struct vc4_dev *vc4 = drm->dev_private;
@@ -1403,13 +1406,15 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
#ifdef CONFIG_DRM_VC4_HDMI_CEC
hdmi->cec_adap = cec_allocate_adapter(&vc4_hdmi_cec_adap_ops,
vc4, "vc4",
- CEC_CAP_TRANSMIT |
- CEC_CAP_LOG_ADDRS |
- CEC_CAP_PASSTHROUGH |
- CEC_CAP_RC, 1);
+ CEC_CAP_DEFAULTS |
+ CEC_CAP_CONNECTOR_INFO, 1);
ret = PTR_ERR_OR_ZERO(hdmi->cec_adap);
if (ret < 0)
goto err_destroy_conn;
+
+ cec_fill_conn_info_from_drm(&conn_info, hdmi->connector);
+ cec_s_conn_info(hdmi->cec_adap, &conn_info);
+
HDMI_WRITE(VC4_HDMI_CPU_MASK_SET, 0xffffffff);
value = HDMI_READ(VC4_HDMI_CEC_CNTRL_1);
value &= ~VC4_HDMI_CEC_DIV_CLK_CNT_MASK;
--
2.20.1
From: Dariusz Marcinkiewicz <[email protected]>
[ Upstream commit 71137bfd98973efb7b762ba168df077b87b34311 ]
Use the new cec_notifier_conn_(un)register() functions to
(un)register the notifier for the HDMI connector, and fill in
the cec_connector_info.
Changes since v7:
- err_runtime_disable -> err_rpm_disable
Changes since v2:
- removed unnecessary call to invalidate phys address before
deregistering the notifier,
- use cec_notifier_phys_addr_invalidate instead of setting
invalid address on a notifier.
Signed-off-by: Dariusz Marcinkiewicz <[email protected]>
Tested-by: Hans Verkuil <[email protected]>
[[email protected]: use 'if (!hdata->notifier)' instead of '== NULL']
Signed-off-by: Hans Verkuil <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/exynos/exynos_hdmi.c | 31 ++++++++++++++++------------
1 file changed, 18 insertions(+), 13 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
index bc1565f1822ab..09aa73c0f2add 100644
--- a/drivers/gpu/drm/exynos/exynos_hdmi.c
+++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
@@ -852,6 +852,10 @@ static enum drm_connector_status hdmi_detect(struct drm_connector *connector,
static void hdmi_connector_destroy(struct drm_connector *connector)
{
+ struct hdmi_context *hdata = connector_to_hdmi(connector);
+
+ cec_notifier_conn_unregister(hdata->notifier);
+
drm_connector_unregister(connector);
drm_connector_cleanup(connector);
}
@@ -935,6 +939,7 @@ static int hdmi_create_connector(struct drm_encoder *encoder)
{
struct hdmi_context *hdata = encoder_to_hdmi(encoder);
struct drm_connector *connector = &hdata->connector;
+ struct cec_connector_info conn_info;
int ret;
connector->interlace_allowed = true;
@@ -957,6 +962,15 @@ static int hdmi_create_connector(struct drm_encoder *encoder)
DRM_DEV_ERROR(hdata->dev, "Failed to attach bridge\n");
}
+ cec_fill_conn_info_from_drm(&conn_info, connector);
+
+ hdata->notifier = cec_notifier_conn_register(hdata->dev, NULL,
+ &conn_info);
+ if (!hdata->notifier) {
+ ret = -ENOMEM;
+ DRM_DEV_ERROR(hdata->dev, "Failed to allocate CEC notifier\n");
+ }
+
return ret;
}
@@ -1528,8 +1542,8 @@ static void hdmi_disable(struct drm_encoder *encoder)
*/
mutex_unlock(&hdata->mutex);
cancel_delayed_work(&hdata->hotplug_work);
- cec_notifier_set_phys_addr(hdata->notifier,
- CEC_PHYS_ADDR_INVALID);
+ if (hdata->notifier)
+ cec_notifier_phys_addr_invalidate(hdata->notifier);
return;
}
@@ -2006,12 +2020,6 @@ static int hdmi_probe(struct platform_device *pdev)
}
}
- hdata->notifier = cec_notifier_get(&pdev->dev);
- if (hdata->notifier == NULL) {
- ret = -ENOMEM;
- goto err_hdmiphy;
- }
-
pm_runtime_enable(dev);
audio_infoframe = &hdata->audio.infoframe;
@@ -2023,7 +2031,7 @@ static int hdmi_probe(struct platform_device *pdev)
ret = hdmi_register_audio_device(hdata);
if (ret)
- goto err_notifier_put;
+ goto err_rpm_disable;
ret = component_add(&pdev->dev, &hdmi_component_ops);
if (ret)
@@ -2034,8 +2042,7 @@ static int hdmi_probe(struct platform_device *pdev)
err_unregister_audio:
platform_device_unregister(hdata->audio.pdev);
-err_notifier_put:
- cec_notifier_put(hdata->notifier);
+err_rpm_disable:
pm_runtime_disable(dev);
err_hdmiphy:
@@ -2054,12 +2061,10 @@ static int hdmi_remove(struct platform_device *pdev)
struct hdmi_context *hdata = platform_get_drvdata(pdev);
cancel_delayed_work_sync(&hdata->hotplug_work);
- cec_notifier_set_phys_addr(hdata->notifier, CEC_PHYS_ADDR_INVALID);
component_del(&pdev->dev, &hdmi_component_ops);
platform_device_unregister(hdata->audio.pdev);
- cec_notifier_put(hdata->notifier);
pm_runtime_disable(&pdev->dev);
if (!IS_ERR(hdata->reg_hdmi_en))
--
2.20.1
From: Alexandru Ardelean <[email protected]>
[ Upstream commit 0fe2f2b789190661df24bb8bf62294145729a1fe ]
The iio_triggered_buffer_{predisable,postenable} functions attach/detach
the poll functions.
For the predisable hook, the disable code should occur before detaching
the poll func, and for the postenable hook, the poll func should be
attached before the enable code.
The driver was slightly reworked. The preenable hook was moved to the
postenable, to add some symmetry to the postenable/predisable part.
Signed-off-by: Alexandru Ardelean <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iio/light/tcs3414.c | 30 ++++++++++++++++++++----------
1 file changed, 20 insertions(+), 10 deletions(-)
diff --git a/drivers/iio/light/tcs3414.c b/drivers/iio/light/tcs3414.c
index 7c0291c5fe76e..b542e5619ead8 100644
--- a/drivers/iio/light/tcs3414.c
+++ b/drivers/iio/light/tcs3414.c
@@ -240,32 +240,42 @@ static const struct iio_info tcs3414_info = {
.attrs = &tcs3414_attribute_group,
};
-static int tcs3414_buffer_preenable(struct iio_dev *indio_dev)
+static int tcs3414_buffer_postenable(struct iio_dev *indio_dev)
{
struct tcs3414_data *data = iio_priv(indio_dev);
+ int ret;
+
+ ret = iio_triggered_buffer_postenable(indio_dev);
+ if (ret)
+ return ret;
data->control |= TCS3414_CONTROL_ADC_EN;
- return i2c_smbus_write_byte_data(data->client, TCS3414_CONTROL,
+ ret = i2c_smbus_write_byte_data(data->client, TCS3414_CONTROL,
data->control);
+ if (ret)
+ iio_triggered_buffer_predisable(indio_dev);
+
+ return ret;
}
static int tcs3414_buffer_predisable(struct iio_dev *indio_dev)
{
struct tcs3414_data *data = iio_priv(indio_dev);
- int ret;
-
- ret = iio_triggered_buffer_predisable(indio_dev);
- if (ret < 0)
- return ret;
+ int ret, ret2;
data->control &= ~TCS3414_CONTROL_ADC_EN;
- return i2c_smbus_write_byte_data(data->client, TCS3414_CONTROL,
+ ret = i2c_smbus_write_byte_data(data->client, TCS3414_CONTROL,
data->control);
+
+ ret2 = iio_triggered_buffer_predisable(indio_dev);
+ if (!ret)
+ ret = ret2;
+
+ return ret;
}
static const struct iio_buffer_setup_ops tcs3414_buffer_setup_ops = {
- .preenable = tcs3414_buffer_preenable,
- .postenable = &iio_triggered_buffer_postenable,
+ .postenable = tcs3414_buffer_postenable,
.predisable = tcs3414_buffer_predisable,
};
--
2.20.1
From: Navid Emamdoost <[email protected]>
[ Upstream commit 3f93616951138a598d930dcaec40f2bfd9ce43bb ]
In rtl_usb_probe if allocation for usb_data fails the allocated hw
should be released. In addition the allocated rtlpriv->usb_data should
be released on error handling path.
Signed-off-by: Navid Emamdoost <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/realtek/rtlwifi/usb.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/usb.c b/drivers/net/wireless/realtek/rtlwifi/usb.c
index 34d68dbf4b4ce..de770bbc3aa27 100644
--- a/drivers/net/wireless/realtek/rtlwifi/usb.c
+++ b/drivers/net/wireless/realtek/rtlwifi/usb.c
@@ -1033,8 +1033,10 @@ int rtl_usb_probe(struct usb_interface *intf,
rtlpriv->hw = hw;
rtlpriv->usb_data = kcalloc(RTL_USB_MAX_RX_COUNT, sizeof(u32),
GFP_KERNEL);
- if (!rtlpriv->usb_data)
+ if (!rtlpriv->usb_data) {
+ ieee80211_free_hw(hw);
return -ENOMEM;
+ }
/* this spin lock must be initialized early */
spin_lock_init(&rtlpriv->locks.usb_lock);
@@ -1095,6 +1097,7 @@ int rtl_usb_probe(struct usb_interface *intf,
_rtl_usb_io_handler_release(hw);
usb_put_dev(udev);
complete(&rtlpriv->firmware_loading_complete);
+ kfree(rtlpriv->usb_data);
return -ENODEV;
}
EXPORT_SYMBOL(rtl_usb_probe);
--
2.20.1
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit 3672bc7093434621c83299ef27ea3b3225a67600 ]
This reverts commit e87882eb9be10b2b9e28156922c2a47d877f5db4.
According to the R-Car Gen3 Hardware Manual Errata for Rev 1.00 of Aug
24, 2018, the SEL_SSI2_{0,1} definition was to be deleted. However,
this errata merely fixed an accidental double definition in the Hardware
User's Manual Rev. 1.00. The real definition is still present in later
revisions of the manual (Rev. 1.50 and Rev. 2.00).
Hence revert the commit to recover the definition.
Based on a patch in the BSP by Takeshi Kihara
<[email protected]>.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/sh-pfc/pfc-r8a77990.c | 20 +++++++++++---------
1 file changed, 11 insertions(+), 9 deletions(-)
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a77990.c b/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
index 2dfb8d9cfda12..3808409cab385 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
@@ -448,6 +448,7 @@ FM(IP12_31_28) IP12_31_28 FM(IP13_31_28) IP13_31_28 FM(IP14_31_28) IP14_31_28 FM
#define MOD_SEL0_1_0 REV4(FM(SEL_SPEED_PULSE_IF_0), FM(SEL_SPEED_PULSE_IF_1), FM(SEL_SPEED_PULSE_IF_2), F_(0, 0))
/* MOD_SEL1 */ /* 0 */ /* 1 */ /* 2 */ /* 3 */ /* 4 */ /* 5 */ /* 6 */ /* 7 */
+#define MOD_SEL1_30 FM(SEL_SSI2_0) FM(SEL_SSI2_1)
#define MOD_SEL1_29 FM(SEL_TIMER_TMU_0) FM(SEL_TIMER_TMU_1)
#define MOD_SEL1_28 FM(SEL_USB_20_CH0_0) FM(SEL_USB_20_CH0_1)
#define MOD_SEL1_26 FM(SEL_DRIF2_0) FM(SEL_DRIF2_1)
@@ -468,7 +469,7 @@ FM(IP12_31_28) IP12_31_28 FM(IP13_31_28) IP13_31_28 FM(IP14_31_28) IP14_31_28 FM
#define PINMUX_MOD_SELS \
\
-MOD_SEL0_30_29 \
+MOD_SEL0_30_29 MOD_SEL1_30 \
MOD_SEL1_29 \
MOD_SEL0_28 MOD_SEL1_28 \
MOD_SEL0_27_26 \
@@ -1058,7 +1059,7 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_MSEL(IP10_27_24, RIF0_CLK_B, SEL_DRIF0_1),
PINMUX_IPSR_MSEL(IP10_27_24, SCL2_B, SEL_I2C2_1),
PINMUX_IPSR_MSEL(IP10_27_24, TCLK1_A, SEL_TIMER_TMU_0),
- PINMUX_IPSR_GPSR(IP10_27_24, SSI_SCK2_B),
+ PINMUX_IPSR_MSEL(IP10_27_24, SSI_SCK2_B, SEL_SSI2_1),
PINMUX_IPSR_GPSR(IP10_27_24, TS_SCK0),
PINMUX_IPSR_GPSR(IP10_31_28, SD0_WP),
@@ -1067,7 +1068,7 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_MSEL(IP10_31_28, RIF0_D0_B, SEL_DRIF0_1),
PINMUX_IPSR_MSEL(IP10_31_28, SDA2_B, SEL_I2C2_1),
PINMUX_IPSR_MSEL(IP10_31_28, TCLK2_A, SEL_TIMER_TMU_0),
- PINMUX_IPSR_GPSR(IP10_31_28, SSI_WS2_B),
+ PINMUX_IPSR_MSEL(IP10_31_28, SSI_WS2_B, SEL_SSI2_1),
PINMUX_IPSR_GPSR(IP10_31_28, TS_SDAT0),
/* IPSR11 */
@@ -1085,13 +1086,13 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_MSEL(IP11_11_8, RX0_A, SEL_SCIF0_0),
PINMUX_IPSR_MSEL(IP11_11_8, HRX1_A, SEL_HSCIF1_0),
- PINMUX_IPSR_GPSR(IP11_11_8, SSI_SCK2_A),
+ PINMUX_IPSR_MSEL(IP11_11_8, SSI_SCK2_A, SEL_SSI2_0),
PINMUX_IPSR_GPSR(IP11_11_8, RIF1_SYNC),
PINMUX_IPSR_GPSR(IP11_11_8, TS_SCK1),
PINMUX_IPSR_MSEL(IP11_15_12, TX0_A, SEL_SCIF0_0),
PINMUX_IPSR_GPSR(IP11_15_12, HTX1_A),
- PINMUX_IPSR_GPSR(IP11_15_12, SSI_WS2_A),
+ PINMUX_IPSR_MSEL(IP11_15_12, SSI_WS2_A, SEL_SSI2_0),
PINMUX_IPSR_GPSR(IP11_15_12, RIF1_D0),
PINMUX_IPSR_GPSR(IP11_15_12, TS_SDAT1),
@@ -4957,11 +4958,12 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
MOD_SEL0_1_0 ))
},
{ PINMUX_CFG_REG_VAR("MOD_SEL1", 0xe6060504, 32,
- GROUP(2, 1, 1, 1, 1, 1, 3, 3, 1, 1, 1, 1,
- 2, 2, 2, 1, 1, 2, 1, 4),
+ GROUP(1, 1, 1, 1, 1, 1, 1, 3, 3, 1, 1, 1,
+ 1, 2, 2, 2, 1, 1, 2, 1, 4),
GROUP(
- /* RESERVED 31, 30 */
- 0, 0, 0, 0,
+ /* RESERVED 31 */
+ 0, 0,
+ MOD_SEL1_30
MOD_SEL1_29
MOD_SEL1_28
/* RESERVED 27 */
--
2.20.1
From: Lukasz Majewski <[email protected]>
[ Upstream commit 9f918a728cf86b2757b6a7025e1f46824bfe3155 ]
This change is necessary for spidev devices (e.g. /dev/spidev3.0) working
in the slave mode (like NXP's dspi driver for Vybrid SoC).
When SPI HW works in this mode - the master is responsible for providing
CS and CLK signals. However, when some fault happens - like for example
distortion on SPI lines - the SPI Linux driver needs a chance to recover
from this abnormal situation and prepare itself for next (correct)
transmission.
This change doesn't pose any threat on drivers working in master mode as
spi_slave_abort() function checks if SPI slave mode is supported.
Signed-off-by: Lukasz Majewski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Reported-by: kbuild test robot <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spidev.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 255786f2e8447..3ea9d8a3e6e89 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -627,6 +627,9 @@ static int spidev_release(struct inode *inode, struct file *filp)
if (dofree)
kfree(spidev);
}
+#ifdef CONFIG_SPI_SLAVE
+ spi_slave_abort(spidev->spi);
+#endif
mutex_unlock(&device_list_lock);
return 0;
--
2.20.1
From: Connor Kuehl <[email protected]>
[ Upstream commit 228241944a48113470d3c3b46c88ba7fbe0a274b ]
Inside a nested 'else' block at the beginning of this function is a
call that assigns 'psta' to the return value of 'rtw_get_stainfo()'.
If 'rtw_get_stainfo()' returns NULL and the flow of control reaches
the 'else if' where 'psta' is dereferenced, then we will dereference
a NULL pointer.
Fix this by checking if 'psta' is not NULL before reading its
'psta->qos_option' data member.
Addresses-Coverity: ("Dereference null return value")
Signed-off-by: Connor Kuehl <[email protected]>
Acked-by: Larry Finger <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/rtl8188eu/core/rtw_xmit.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/rtl8188eu/core/rtw_xmit.c b/drivers/staging/rtl8188eu/core/rtw_xmit.c
index 952f2ab513478..c37591657bac4 100644
--- a/drivers/staging/rtl8188eu/core/rtw_xmit.c
+++ b/drivers/staging/rtl8188eu/core/rtw_xmit.c
@@ -776,7 +776,7 @@ s32 rtw_make_wlanhdr(struct adapter *padapter, u8 *hdr, struct pkt_attrib *pattr
memcpy(pwlanhdr->addr2, get_bssid(pmlmepriv), ETH_ALEN);
memcpy(pwlanhdr->addr3, pattrib->src, ETH_ALEN);
- if (psta->qos_option)
+ if (psta && psta->qos_option)
qos_option = true;
} else if (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) ||
check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE)) {
@@ -784,7 +784,7 @@ s32 rtw_make_wlanhdr(struct adapter *padapter, u8 *hdr, struct pkt_attrib *pattr
memcpy(pwlanhdr->addr2, pattrib->src, ETH_ALEN);
memcpy(pwlanhdr->addr3, get_bssid(pmlmepriv), ETH_ALEN);
- if (psta->qos_option)
+ if (psta && psta->qos_option)
qos_option = true;
} else {
RT_TRACE(_module_rtl871x_xmit_c_, _drv_err_, ("fw_state:%x is not allowed to xmit frame\n", get_fwstate(pmlmepriv)));
--
2.20.1
From: Sean Paul <[email protected]>
[ Upstream commit 268de6530aa18fe5773062367fd119f0045f6e88 ]
Spec says[1] Allocated_PBN is 16 bits
[1]- DisplayPort 1.2 Spec, Section 2.11.9.8, Table 2-98
Fixes: ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)")
Cc: Lyude Paul <[email protected]>
Cc: Todd Previte <[email protected]>
Cc: Dave Airlie <[email protected]>
Cc: Maarten Lankhorst <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Sean Paul <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: [email protected]
Reviewed-by: Lyude Paul <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
include/drm/drm_dp_mst_helper.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/drm/drm_dp_mst_helper.h b/include/drm/drm_dp_mst_helper.h
index 8c97a5f92c470..e1b812ef28ef2 100644
--- a/include/drm/drm_dp_mst_helper.h
+++ b/include/drm/drm_dp_mst_helper.h
@@ -334,7 +334,7 @@ struct drm_dp_resource_status_notify {
struct drm_dp_query_payload_ack_reply {
u8 port_number;
- u8 allocated_pbn;
+ u16 allocated_pbn;
};
struct drm_dp_sideband_msg_req_body {
--
2.20.1
From: Max Gurtovoy <[email protected]>
[ Upstream commit 7718cf03c3ce4b6ebd90107643ccd01c952a1fce ]
In case we don't set the sg_prot_tablesize, the scsi layer assign the
default size (65535 entries). We should limit this size since we should
take into consideration the underlaying device capability. This cap is
considered when calculating the sg_tablesize. Otherwise, for example,
we can get that /sys/block/sdb/queue/max_segments is 128 and
/sys/block/sdb/queue/max_integrity_segments is 65535.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Max Gurtovoy <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/ulp/iser/iscsi_iser.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c
index 2e72fc5af1573..c4c015c604465 100644
--- a/drivers/infiniband/ulp/iser/iscsi_iser.c
+++ b/drivers/infiniband/ulp/iser/iscsi_iser.c
@@ -646,6 +646,7 @@ iscsi_iser_session_create(struct iscsi_endpoint *ep,
if (ib_conn->pi_support) {
u32 sig_caps = ib_dev->attrs.sig_prot_cap;
+ shost->sg_prot_tablesize = shost->sg_tablesize;
scsi_host_set_prot(shost, iser_dif_prot_caps(sig_caps));
scsi_host_set_guard(shost, SHOST_DIX_GUARD_IP |
SHOST_DIX_GUARD_CRC);
--
2.20.1
From: Krzysztof Wilczynski <[email protected]>
[ Upstream commit f552fde983d378e7339f9ea74a25f918563bf0d3 ]
Separate the declaration of struct bh1750_chip_info from definition
of bh1750_chip_info_tbl[] in a single statement as it makes the code
hard to read, and with the extra newline it makes it look as if the
bh1750_chip_info_tbl[] had no explicit type.
This change also resolves the following compiler warning about the
unusual position of the static keyword that can be seen when building
with warnings enabled (W=1):
drivers/iio/light/bh1750.c:64:1: warning:
‘static’ is not at beginning of declaration [-Wold-style-declaration]
Related to commit 3a11fbb037a1 ("iio: light: add support for ROHM
BH1710/BH1715/BH1721/BH1750/BH1751 ambient light sensors").
Signed-off-by: Krzysztof Wilczynski <[email protected]>
Acked-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iio/light/bh1750.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/light/bh1750.c b/drivers/iio/light/bh1750.c
index 28347df78cff6..adb5ab9e34390 100644
--- a/drivers/iio/light/bh1750.c
+++ b/drivers/iio/light/bh1750.c
@@ -59,9 +59,9 @@ struct bh1750_chip_info {
u16 int_time_low_mask;
u16 int_time_high_mask;
-}
+};
-static const bh1750_chip_info_tbl[] = {
+static const struct bh1750_chip_info bh1750_chip_info_tbl[] = {
[BH1710] = { 140, 1022, 300, 400, 250000000, 2, 0x001F, 0x03E0 },
[BH1721] = { 140, 1020, 300, 400, 250000000, 2, 0x0010, 0x03E0 },
[BH1750] = { 31, 254, 69, 1740, 57500000, 1, 0x001F, 0x00E0 },
--
2.20.1
From: Allen Pais <[email protected]>
[ Upstream commit 7da413a18583baaf35dd4a8eb414fa410367d7f2 ]
alloc_workqueue is not checked for errors and as a result,
a potential NULL dereference could occur.
Signed-off-by: Allen Pais <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/marvell/libertas/if_sdio.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/wireless/marvell/libertas/if_sdio.c b/drivers/net/wireless/marvell/libertas/if_sdio.c
index 242d8845da3fa..30f1025ecb9bc 100644
--- a/drivers/net/wireless/marvell/libertas/if_sdio.c
+++ b/drivers/net/wireless/marvell/libertas/if_sdio.c
@@ -1179,6 +1179,10 @@ static int if_sdio_probe(struct sdio_func *func,
spin_lock_init(&card->lock);
card->workqueue = alloc_workqueue("libertas_sdio", WQ_MEM_RECLAIM, 0);
+ if (unlikely(!card->workqueue)) {
+ ret = -ENOMEM;
+ goto err_queue;
+ }
INIT_WORK(&card->packet_worker, if_sdio_host_to_card_worker);
init_waitqueue_head(&card->pwron_waitq);
@@ -1230,6 +1234,7 @@ static int if_sdio_probe(struct sdio_func *func,
lbs_remove_card(priv);
free:
destroy_workqueue(card->workqueue);
+err_queue:
while (card->packets) {
packet = card->packets;
card->packets = card->packets->next;
--
2.20.1
From: Navid Emamdoost <[email protected]>
[ Upstream commit ca312438cf176a16d4b89350cade8789ba8d7133 ]
In rtl8192_tx on error handling path allocated urbs and also skb should
be released.
Signed-off-by: Navid Emamdoost <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/rtl8192u/r8192U_core.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index fe1f279ca368b..b62b03802b1b6 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -1422,7 +1422,7 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb)
(struct tx_fwinfo_819x_usb *)(skb->data + USB_HWDESC_HEADER_LEN);
struct usb_device *udev = priv->udev;
int pend;
- int status;
+ int status, rt = -1;
struct urb *tx_urb = NULL, *tx_urb_zero = NULL;
unsigned int idx_pipe;
@@ -1566,8 +1566,10 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb)
}
if (bSend0Byte) {
tx_urb_zero = usb_alloc_urb(0, GFP_ATOMIC);
- if (!tx_urb_zero)
- return -ENOMEM;
+ if (!tx_urb_zero) {
+ rt = -ENOMEM;
+ goto error;
+ }
usb_fill_bulk_urb(tx_urb_zero, udev,
usb_sndbulkpipe(udev, idx_pipe),
&zero, 0, tx_zero_isr, dev);
@@ -1577,7 +1579,7 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb)
"Error TX URB for zero byte %d, error %d",
atomic_read(&priv->tx_pending[tcb_desc->queue_index]),
status);
- return -1;
+ goto error;
}
}
netif_trans_update(dev);
@@ -1588,7 +1590,12 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb)
RT_TRACE(COMP_ERR, "Error TX URB %d, error %d",
atomic_read(&priv->tx_pending[tcb_desc->queue_index]),
status);
- return -1;
+
+error:
+ dev_kfree_skb_any(skb);
+ usb_free_urb(tx_urb);
+ usb_free_urb(tx_urb_zero);
+ return rt;
}
static short rtl8192_usb_initendpoints(struct net_device *dev)
--
2.20.1
From: Laurent Pinchart <[email protected]>
[ Upstream commit 65abbda8ed7ca48c8807d6b04a77431b438fa659 ]
Panels must be initialised with drm_panel_init(). Add the missing
function call in the panel-raspberrypi-touchscreen.c and
panel-sitronix-st7789v.c drivers.
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c | 1 +
drivers/gpu/drm/panel/panel-sitronix-st7789v.c | 1 +
2 files changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
index b5b14aa059ea7..2aa89eaecf6ff 100644
--- a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
+++ b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
@@ -426,6 +426,7 @@ static int rpi_touchscreen_probe(struct i2c_client *i2c,
return PTR_ERR(ts->dsi);
}
+ drm_panel_init(&ts->base);
ts->base.dev = dev;
ts->base.funcs = &rpi_touchscreen_funcs;
diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
index 5e3e92ea9ea69..3b2612ae931e8 100644
--- a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
@@ -381,6 +381,7 @@ static int st7789v_probe(struct spi_device *spi)
spi_set_drvdata(spi, ctx);
ctx->spi = spi;
+ drm_panel_init(&ctx->panel);
ctx->panel.dev = &spi->dev;
ctx->panel.funcs = &st7789v_drm_funcs;
--
2.20.1
From: Brendan Higgins <[email protected]>
[ Upstream commit 33adf80f5b52e3f7c55ad66ffcaaff93c6888aaa ]
Fix the following warning seen on GCC 7.3:
kunit/test-test.o: warning: objtool: kunit_test_unsuccessful_try() falls through to next function kunit_test_catch()
kunit_try_catch_throw is a function added in the following patch in this
series; it allows KUnit, a unit testing framework for the kernel, to
bail out of a broken test. As a consequence, it is a new __noreturn
function that objtool thinks is broken (as seen above). So fix this
warning by adding kunit_try_catch_throw to objtool's noreturn list.
Reported-by: kbuild test robot <[email protected]>
Signed-off-by: Brendan Higgins <[email protected]>
Acked-by: Josh Poimboeuf <[email protected]>
Link: https://www.spinics.net/lists/linux-kbuild/msg21708.html
Cc: Peter Zijlstra <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/objtool/check.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/objtool/check.c b/tools/objtool/check.c
index 176f2f0840609..0c8e17f946cda 100644
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -145,6 +145,7 @@ static bool __dead_end_function(struct objtool_file *file, struct symbol *func,
"usercopy_abort",
"machine_real_restart",
"rewind_stack_do_exit",
+ "kunit_try_catch_throw",
};
if (!func)
--
2.20.1
From: Hauke Mehrtens <[email protected]>
[ Upstream commit b10f32672946ad638a430cc4289029b7acf8e979 ]
It looks like the FW on QCA9984 already reports the tx airtimes before
the station is added to the peer entry. The peer entry is created in
ath10k_peer_map_event() just with the vdev_id and the ethaddr, but
not with a station entry, this is added later in ath10k_peer_create() in
callbacks from mac80211.
When there is no sta added to the peer entry, this function fails
because it calls ieee80211_sta_register_airtime() with NULL.
This was reported in OpenWrt some time ago:
https://bugs.openwrt.org/index.php?do=details&task_id=2414
This commit should fix this crash:
[ 75.991714] Unable to handle kernel paging request at virtual address fffff9e8
[ 75.991756] pgd = c0204000
[ 75.997955] [fffff9e8] *pgd=5fdfd861, *pte=00000000, *ppte=00000000
[ 76.000537] Internal error: Oops: 37 [#1] SMP ARM
[ 76.006686] Modules linked in: pppoe ppp_async ath10k_pci ath10k_core ath pptp pppox ppp_mppe ppp_generic mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_esp xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY usbserial slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_netlink iptable_raw iptable_mangle iptable_filter ipt_ah ipt_ECN ip_tables crc_ccitt compat chaoskey fuse sch_cake sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32
[ 76.059974] cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6t_NPT ip6t_MASQUERADE nf_nat_masquerade_ipv6 nf_nat nf_conntrack nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 msdos ip_gre gre ifb sit tunnel4 ip_tunnel tun vfat fat hfsplus cifs nls_utf8 nls_iso8859_15 nls_iso8859_1 nls_cp850 nls_cp437 nls_cp1250 sha1_generic md5 md4
[ 76.130634] usb_storage leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_of_simple ohci_platform ohci_hcd phy_qcom_dwc3 ahci ehci_platform sd_mod ahci_platform libahci_platform libahci libata scsi_mod ehci_hcd gpio_button_hotplug ext4 mbcache jbd2 exfat crc32c_generic
[ 76.154772] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.132 #0
[ 76.177001] Hardware name: Generic DT based system
[ 76.182990] task: c0b06d80 task.stack: c0b00000
[ 76.187832] PC is at ieee80211_sta_register_airtime+0x24/0x148 [mac80211]
[ 76.192211] LR is at ath10k_htt_t2h_msg_handler+0x678/0x10f4 [ath10k_core]
[ 76.199052] pc : [<bf75bfac>] lr : [<bf83e8b0>] psr: a0000113
[ 76.205820] sp : c0b01d54 ip : 00000002 fp : bf869c0c
[ 76.211981] r10: 0000003c r9 : dbdca138 r8 : 00060002
[ 76.217192] r7 : 00000000 r6 : dabe1150 r5 : 00000000 r4 : dbdc95c0
[ 76.222401] r3 : 00000000 r2 : 00060002 r1 : 00000000 r0 : 00000000
[ 76.229003] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 76.235509] Control: 10c5787d Table: 5c94006a DAC: 00000051
[ 76.242716] Process swapper/0 (pid: 0, stack limit = 0xc0b00210)
[ 76.248446] Stack: (0xc0b01d54 to 0xc0b02000)
[ 76.254532] 1d40: dbdc95c0 00000000 dabe1150
[ 76.258808] 1d60: 00000001 dabe1150 dbdca138 0000003c bf869c0c bf83e8b0 00000002 c0314b10
[ 76.266969] 1d80: dbdc9c70 00000001 00000001 dabe114c 00010000 00000000 dbdcd724 bf88f3d8
[ 76.275126] 1da0: c0310d28 db393c00 dbdc95c0 00000000 c0b01dd0 c07fb4c4 dbdcd724 00000001
[ 76.283286] 1dc0: 00000022 bf88b09c db393c00 00000022 c0b01dd0 c0b01dd0 00000000 dbdcc5c0
[ 76.291445] 1de0: bf88f04c dbdcd654 dbdcd71c dbdc95c0 00000014 dbdcd724 dbdcc5c0 00000005
[ 76.299605] 1e00: 0004b400 bf85c360 00000000 bf87101c c0b01e24 00000006 00000000 dbdc95c0
[ 76.307764] 1e20: 00000001 00000040 0000012c c0b01e80 1cf51000 bf85c448 dbdcd440 dbdc95c0
[ 76.315925] 1e40: dbdca440 ffffa880 00000040 bf88cb68 dbdcd440 00000001 00000040 ffffa880
[ 76.324084] 1e60: c0b02d00 c06d72e0 dd990080 c0a3f080 c0b255dc c0b047e4 c090afac c090e80c
[ 76.332244] 1e80: c0b01e80 c0b01e80 c0b01e88 c0b01e88 dd4cc200 00000000 00000003 c0b0208c
[ 76.340405] 1ea0: c0b02080 40000003 ffffe000 00000100 c0b02080 c03015c8 00000000 00000001
[ 76.348564] 1ec0: dd408000 c0a38210 c0b2c7c0 0000000a ffffa880 c0b02d00 c07fb764 00200102
[ 76.356723] 1ee0: dd4cc268 c0a3e414 00000000 00000000 00000001 dd408000 de803000 00000000
[ 76.364883] 1f00: 00000000 c03247cc c0a3e414 c0368f1c c0b03f60 c0b153cc de80200c de802000
[ 76.373042] 1f20: c0b01f48 c0301488 c0308630 60000013 ffffffff c0b01f7c 00000000 c0b00000
[ 76.381204] 1f40: 00000000 c030c08c 00000001 00000000 00000000 c0315180 ffffe000 c0b03cc0
[ 76.389363] 1f60: c0b03c70 00000000 00000000 c0a2da28 00000000 00000000 c0b01f90 c0b01f98
[ 76.397522] 1f80: c030862c c0308630 60000013 ffffffff 00000051 00000000 ffffe000 c035dd18
[ 76.405681] 1fa0: 000000bf c0b03c40 00000000 c0b2c000 dddfce80 c035e060 c0b2c040 c0a00cf4
[ 76.413842] 1fc0: ffffffff ffffffff 00000000 c0a0067c c0a2da28 00000000 00000000 c0b2c1d4
[ 76.422001] 1fe0: c0b03c5c c0a2da24 c0b07ee0 4220406a 512f04d0 4220807c 00000000 00000000
[ 76.430335] [<bf75bfac>] (ieee80211_sta_register_airtime [mac80211]) from [<00000002>] (0x2)
[ 76.438314] Code: e1cd81f0 e1a08002 e1cda1f8 e58de020 (e5102618)
[ 76.446965] ---[ end trace 227a38ade964d642 ]---
Fixes: bb31b7cb106c ("ath10k: report tx airtime provided by fw")
Signed-off-by: Hauke Mehrtens <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath10k/htt_rx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 83a7fb68fd244..7f3ec7fa5a44e 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -2639,7 +2639,7 @@ static void ath10k_htt_rx_tx_compl_ind(struct ath10k *ar,
spin_lock_bh(&ar->data_lock);
peer = ath10k_peer_find_by_id(ar, peer_id);
- if (!peer) {
+ if (!peer || !peer->sta) {
spin_unlock_bh(&ar->data_lock);
rcu_read_unlock();
continue;
--
2.20.1
From: Martin Tsai <[email protected]>
[ Upstream commit 616f5b65f1c02d3d6ae370644670d14c57de2fd8 ]
[Why]
The new implementation changed the behavior to allow process setMode
to DAL when DAL returns empty mode query for unplugged display.
This will trigger additional disable_link().
When unplug HDMI from MST dock, driver will update stream->signal to
"Virtual". disable_link() will call disable_output() if the signal type
is not DP and induce other displays on MST dock show black screen.
[How]
Don't need to process disable_output() if the signal type is virtual.
Signed-off-by: Martin Tsai <[email protected]>
Reviewed-by: Charlene Liu <[email protected]>
Acked-by: Leo Li <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/dc/core/dc_link.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index 355b4ba127966..90217cf83ce17 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -2157,8 +2157,10 @@ static void disable_link(struct dc_link *link, enum signal_type signal)
dp_set_fec_ready(link, false);
}
#endif
- } else
- link->link_enc->funcs->disable_output(link->link_enc, signal);
+ } else {
+ if (signal != SIGNAL_TYPE_VIRTUAL)
+ link->link_enc->funcs->disable_output(link->link_enc, signal);
+ }
if (signal == SIGNAL_TYPE_DISPLAY_PORT_MST) {
/* MST disable link only when no stream use the link */
--
2.20.1
From: Jack Zhang <[email protected]>
[ Upstream commit 51c0f58e9f6af3a387d14608033e6796a7ad90ee ]
psp v11 code missed ring stop in ring create function(VMR)
while psp v3.1 code had the code. This will cause VM destroy1
fail and psp ring create fail.
For SIOV-VF, ring_stop should not be deleted in ring_create
function.
Signed-off-by: Jack Zhang <[email protected]>
Reviewed-by: Feifei Xu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/psp_v11_0.c | 61 ++++++++++++++------------
1 file changed, 34 insertions(+), 27 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/psp_v11_0.c b/drivers/gpu/drm/amd/amdgpu/psp_v11_0.c
index 41b72588adcf5..68774524e58bb 100644
--- a/drivers/gpu/drm/amd/amdgpu/psp_v11_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/psp_v11_0.c
@@ -373,6 +373,34 @@ static bool psp_v11_0_support_vmr_ring(struct psp_context *psp)
return false;
}
+static int psp_v11_0_ring_stop(struct psp_context *psp,
+ enum psp_ring_type ring_type)
+{
+ int ret = 0;
+ struct amdgpu_device *adev = psp->adev;
+
+ /* Write the ring destroy command*/
+ if (psp_v11_0_support_vmr_ring(psp))
+ WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_101,
+ GFX_CTRL_CMD_ID_DESTROY_GPCOM_RING);
+ else
+ WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_64,
+ GFX_CTRL_CMD_ID_DESTROY_RINGS);
+
+ /* there might be handshake issue with hardware which needs delay */
+ mdelay(20);
+
+ /* Wait for response flag (bit 31) */
+ if (psp_v11_0_support_vmr_ring(psp))
+ ret = psp_wait_for(psp, SOC15_REG_OFFSET(MP0, 0, mmMP0_SMN_C2PMSG_101),
+ 0x80000000, 0x80000000, false);
+ else
+ ret = psp_wait_for(psp, SOC15_REG_OFFSET(MP0, 0, mmMP0_SMN_C2PMSG_64),
+ 0x80000000, 0x80000000, false);
+
+ return ret;
+}
+
static int psp_v11_0_ring_create(struct psp_context *psp,
enum psp_ring_type ring_type)
{
@@ -382,6 +410,12 @@ static int psp_v11_0_ring_create(struct psp_context *psp,
struct amdgpu_device *adev = psp->adev;
if (psp_v11_0_support_vmr_ring(psp)) {
+ ret = psp_v11_0_ring_stop(psp, ring_type);
+ if (ret) {
+ DRM_ERROR("psp_v11_0_ring_stop_sriov failed!\n");
+ return ret;
+ }
+
/* Write low address of the ring to C2PMSG_102 */
psp_ring_reg = lower_32_bits(ring->ring_mem_mc_addr);
WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_102, psp_ring_reg);
@@ -426,33 +460,6 @@ static int psp_v11_0_ring_create(struct psp_context *psp,
return ret;
}
-static int psp_v11_0_ring_stop(struct psp_context *psp,
- enum psp_ring_type ring_type)
-{
- int ret = 0;
- struct amdgpu_device *adev = psp->adev;
-
- /* Write the ring destroy command*/
- if (psp_v11_0_support_vmr_ring(psp))
- WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_101,
- GFX_CTRL_CMD_ID_DESTROY_GPCOM_RING);
- else
- WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_64,
- GFX_CTRL_CMD_ID_DESTROY_RINGS);
-
- /* there might be handshake issue with hardware which needs delay */
- mdelay(20);
-
- /* Wait for response flag (bit 31) */
- if (psp_v11_0_support_vmr_ring(psp))
- ret = psp_wait_for(psp, SOC15_REG_OFFSET(MP0, 0, mmMP0_SMN_C2PMSG_101),
- 0x80000000, 0x80000000, false);
- else
- ret = psp_wait_for(psp, SOC15_REG_OFFSET(MP0, 0, mmMP0_SMN_C2PMSG_64),
- 0x80000000, 0x80000000, false);
-
- return ret;
-}
static int psp_v11_0_ring_destroy(struct psp_context *psp,
enum psp_ring_type ring_type)
--
2.20.1
From: Dan Carpenter <[email protected]>
[ Upstream commit d72cf01f410aa09868d98b672f3f92328c96b32d ]
This code will likely crash if we try to do a zero byte write. The code
looks like this:
/* strip trailing whitespace */
for (i = count - 1; i > 0; i--)
if (isspace(buf[i]))
...
We're writing zero bytes so count = 0. You would think that "count - 1"
would be negative one, but because "i" is unsigned it is a large
positive numer instead. The "i > 0" condition is true and the "buf[i]"
access will be out of bounds.
The fix is to make "i" signed and now everything works as expected. The
upper bound of "count" is capped in __kernel_write() at MAX_RW_COUNT so
we don't have to worry about it being higher than INT_MAX.
Fixes: 02dd95fe3169 ("drm/tinydrm: Add MIPI DBI support")
Signed-off-by: Dan Carpenter <[email protected]>
[noralf: Adjust title]
Signed-off-by: Noralf Trønnes <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20190821072456.GJ26957@mwanda
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/tinydrm/mipi-dbi.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/tinydrm/mipi-dbi.c b/drivers/gpu/drm/tinydrm/mipi-dbi.c
index ca9da654fc6f4..d6b7c706c674b 100644
--- a/drivers/gpu/drm/tinydrm/mipi-dbi.c
+++ b/drivers/gpu/drm/tinydrm/mipi-dbi.c
@@ -1033,8 +1033,7 @@ static ssize_t mipi_dbi_debugfs_command_write(struct file *file,
struct mipi_dbi *mipi = m->private;
u8 val, cmd = 0, parameters[64];
char *buf, *pos, *token;
- unsigned int i;
- int ret, idx;
+ int i, ret, idx;
if (!drm_dev_enter(&mipi->drm, &idx))
return -ENODEV;
--
2.20.1
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit 7666dfd533d4c55733037775d47a8e3551b341a2 ]
This reverts commit e167d723e1a472d252e5c4baf823b77ce5543b05.
According to the R-Car Gen3 Hardware Manual Errata for Rev 1.00 of Aug
24, 2018, the SEL_SIMCARD_{0,1} definition was to be deleted. However,
this errata merely fixed an accidental double definition in the Hardware
User's Manual Rev. 1.00. The real definition is still present in later
revisions of the manual (Rev. 1.50 and Rev. 2.00).
Hence revert the commit to recover the definition.
Based on a patch in the BSP by Takeshi Kihara
<[email protected]>.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/sh-pfc/pfc-r8a77990.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a77990.c b/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
index 3808409cab385..5200dadd6b3ef 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
@@ -448,6 +448,7 @@ FM(IP12_31_28) IP12_31_28 FM(IP13_31_28) IP13_31_28 FM(IP14_31_28) IP14_31_28 FM
#define MOD_SEL0_1_0 REV4(FM(SEL_SPEED_PULSE_IF_0), FM(SEL_SPEED_PULSE_IF_1), FM(SEL_SPEED_PULSE_IF_2), F_(0, 0))
/* MOD_SEL1 */ /* 0 */ /* 1 */ /* 2 */ /* 3 */ /* 4 */ /* 5 */ /* 6 */ /* 7 */
+#define MOD_SEL1_31 FM(SEL_SIMCARD_0) FM(SEL_SIMCARD_1)
#define MOD_SEL1_30 FM(SEL_SSI2_0) FM(SEL_SSI2_1)
#define MOD_SEL1_29 FM(SEL_TIMER_TMU_0) FM(SEL_TIMER_TMU_1)
#define MOD_SEL1_28 FM(SEL_USB_20_CH0_0) FM(SEL_USB_20_CH0_1)
@@ -469,6 +470,7 @@ FM(IP12_31_28) IP12_31_28 FM(IP13_31_28) IP13_31_28 FM(IP14_31_28) IP14_31_28 FM
#define PINMUX_MOD_SELS \
\
+ MOD_SEL1_31 \
MOD_SEL0_30_29 MOD_SEL1_30 \
MOD_SEL1_29 \
MOD_SEL0_28 MOD_SEL1_28 \
@@ -1197,7 +1199,7 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_MSEL(IP13_19_16, RIF0_D1_A, SEL_DRIF0_0),
PINMUX_IPSR_MSEL(IP13_19_16, SDA1_B, SEL_I2C1_1),
PINMUX_IPSR_MSEL(IP13_19_16, TCLK2_B, SEL_TIMER_TMU_1),
- PINMUX_IPSR_GPSR(IP13_19_16, SIM0_D_A),
+ PINMUX_IPSR_MSEL(IP13_19_16, SIM0_D_A, SEL_SIMCARD_0),
PINMUX_IPSR_GPSR(IP13_23_20, MLB_DAT),
PINMUX_IPSR_MSEL(IP13_23_20, TX0_B, SEL_SCIF0_1),
@@ -1265,7 +1267,7 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_GPSR(IP15_15_12, TPU0TO2),
PINMUX_IPSR_MSEL(IP15_15_12, SDA1_D, SEL_I2C1_3),
PINMUX_IPSR_MSEL(IP15_15_12, FSO_CFE_1_N_B, SEL_FSO_1),
- PINMUX_IPSR_GPSR(IP15_15_12, SIM0_D_B),
+ PINMUX_IPSR_MSEL(IP15_15_12, SIM0_D_B, SEL_SIMCARD_1),
PINMUX_IPSR_GPSR(IP15_19_16, SSI_SDATA6),
PINMUX_IPSR_MSEL(IP15_19_16, HRTS2_N_A, SEL_HSCIF2_0),
@@ -4961,8 +4963,7 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
GROUP(1, 1, 1, 1, 1, 1, 1, 3, 3, 1, 1, 1,
1, 2, 2, 2, 1, 1, 2, 1, 4),
GROUP(
- /* RESERVED 31 */
- 0, 0,
+ MOD_SEL1_31
MOD_SEL1_30
MOD_SEL1_29
MOD_SEL1_28
--
2.20.1
From: Jing Zhou <[email protected]>
[ Upstream commit b131932215c993ea5adf8192d1de2e8d6b23048d ]
[Why]
DP1.2 LL CTS test failure.
[How]
The failure is caused by not verify stream link is equal
to link, only check stream and link is not null.
Signed-off-by: Jing Zhou <[email protected]>
Reviewed-by: Wenjing Liu <[email protected]>
Acked-by: Bhawanpreet Lakha <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/dc/core/dc_link_hwss.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_hwss.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_hwss.c
index a9135764e5806..767de9d6b07a7 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_hwss.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_hwss.c
@@ -312,7 +312,8 @@ void dp_retrain_link_dp_test(struct dc_link *link,
if (pipes[i].stream != NULL &&
!pipes[i].top_pipe &&
pipes[i].stream->link != NULL &&
- pipes[i].stream_res.stream_enc != NULL) {
+ pipes[i].stream_res.stream_enc != NULL &&
+ pipes[i].stream->link == link) {
udelay(100);
pipes[i].stream_res.stream_enc->funcs->dp_blank(
--
2.20.1
From: Andrea Merello <[email protected]>
[ Upstream commit 505ea3ada665c466d0064b11b6e611b7f995517d ]
Adding missing indio_dev->dev.of_node references so that, in case multiple
max31856 are present, users can get some clues to being able to distinguish
each of them. While at it, add also the missing parent reference.
Signed-off-by: Andrea Merello <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iio/temperature/max31856.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/iio/temperature/max31856.c b/drivers/iio/temperature/max31856.c
index f184ba5601d94..73ed550e3fc95 100644
--- a/drivers/iio/temperature/max31856.c
+++ b/drivers/iio/temperature/max31856.c
@@ -284,6 +284,8 @@ static int max31856_probe(struct spi_device *spi)
spi_set_drvdata(spi, indio_dev);
indio_dev->info = &max31856_info;
+ indio_dev->dev.parent = &spi->dev;
+ indio_dev->dev.of_node = spi->dev.of_node;
indio_dev->name = id->name;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = max31856_channels;
--
2.20.1
From: Christian König <[email protected]>
[ Upstream commit 6817bf283b2b851095825ec7f0e9f10398e09125 ]
Need to make sure that we actually dropping the right fence.
Could be done with RCU as well, but to complicated for a fix.
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Chunming Zhou <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
index 24c3c05e2fb7d..4a7b2ffd3bfe3 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
@@ -1036,10 +1036,8 @@ int amdgpu_vm_flush(struct amdgpu_ring *ring, struct amdgpu_job *job, bool need_
id->oa_base != job->oa_base ||
id->oa_size != job->oa_size);
bool vm_flush_needed = job->vm_needs_flush;
- bool pasid_mapping_needed = id->pasid != job->pasid ||
- !id->pasid_mapping ||
- !dma_fence_is_signaled(id->pasid_mapping);
struct dma_fence *fence = NULL;
+ bool pasid_mapping_needed;
unsigned patch_offset = 0;
int r;
@@ -1049,6 +1047,12 @@ int amdgpu_vm_flush(struct amdgpu_ring *ring, struct amdgpu_job *job, bool need_
pasid_mapping_needed = true;
}
+ mutex_lock(&id_mgr->lock);
+ if (id->pasid != job->pasid || !id->pasid_mapping ||
+ !dma_fence_is_signaled(id->pasid_mapping))
+ pasid_mapping_needed = true;
+ mutex_unlock(&id_mgr->lock);
+
gds_switch_needed &= !!ring->funcs->emit_gds_switch;
vm_flush_needed &= !!ring->funcs->emit_vm_flush &&
job->vm_pd_addr != AMDGPU_BO_INVALID_OFFSET;
@@ -1088,9 +1092,11 @@ int amdgpu_vm_flush(struct amdgpu_ring *ring, struct amdgpu_job *job, bool need_
}
if (pasid_mapping_needed) {
+ mutex_lock(&id_mgr->lock);
id->pasid = job->pasid;
dma_fence_put(id->pasid_mapping);
id->pasid_mapping = dma_fence_get(fence);
+ mutex_unlock(&id_mgr->lock);
}
dma_fence_put(fence);
--
2.20.1
From: Brian Masney <[email protected]>
[ Upstream commit 2708e876272d89bbbff811d12834adbeef85f022 ]
Silence two warning messages that occur due to -EPROBE_DEFER errors to
help cleanup the system boot log.
Signed-off-by: Brian Masney <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Andrzej Hajda <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/bridge/analogix-anx78xx.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix-anx78xx.c b/drivers/gpu/drm/bridge/analogix-anx78xx.c
index 3c7cc5af735ce..56df07cdab68f 100644
--- a/drivers/gpu/drm/bridge/analogix-anx78xx.c
+++ b/drivers/gpu/drm/bridge/analogix-anx78xx.c
@@ -715,7 +715,9 @@ static int anx78xx_init_pdata(struct anx78xx *anx78xx)
/* 1.0V digital core power regulator */
pdata->dvdd10 = devm_regulator_get(dev, "dvdd10");
if (IS_ERR(pdata->dvdd10)) {
- DRM_ERROR("DVDD10 regulator not found\n");
+ if (PTR_ERR(pdata->dvdd10) != -EPROBE_DEFER)
+ DRM_ERROR("DVDD10 regulator not found\n");
+
return PTR_ERR(pdata->dvdd10);
}
@@ -1332,7 +1334,9 @@ static int anx78xx_i2c_probe(struct i2c_client *client,
err = anx78xx_init_pdata(anx78xx);
if (err) {
- DRM_ERROR("Failed to initialize pdata: %d\n", err);
+ if (err != -EPROBE_DEFER)
+ DRM_ERROR("Failed to initialize pdata: %d\n", err);
+
return err;
}
--
2.20.1
On Tue, Dec 10, 2019 at 1:25 PM Sasha Levin <[email protected]> wrote:
>
> From: Brendan Higgins <[email protected]>
>
> [ Upstream commit 33adf80f5b52e3f7c55ad66ffcaaff93c6888aaa ]
>
> Fix the following warning seen on GCC 7.3:
> kunit/test-test.o: warning: objtool: kunit_test_unsuccessful_try() falls through to next function kunit_test_catch()
>
> kunit_try_catch_throw is a function added in the following patch in this
> series; it allows KUnit, a unit testing framework for the kernel, to
> bail out of a broken test. As a consequence, it is a new __noreturn
> function that objtool thinks is broken (as seen above). So fix this
> warning by adding kunit_try_catch_throw to objtool's noreturn list.
>
> Reported-by: kbuild test robot <[email protected]>
> Signed-off-by: Brendan Higgins <[email protected]>
> Acked-by: Josh Poimboeuf <[email protected]>
> Link: https://www.spinics.net/lists/linux-kbuild/msg21708.html
> Cc: Peter Zijlstra <[email protected]>
> Signed-off-by: Shuah Khan <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
I don't think this change should be backported. This patch is to
ignore an erroneous warning introduced by KUnit; it serves no purpose
prior to the KUnit patches being merged.
Note: I have the same complaint for this rebase here:
https://lore.kernel.org/stable/CAFd5g45s-cGXp6at4kv+=8v3cuxfbXLPEOKGUfvJ6E+u1caHcA@mail.gmail.com/
> ---
> tools/objtool/check.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/tools/objtool/check.c b/tools/objtool/check.c
> index 176f2f0840609..0c8e17f946cda 100644
> --- a/tools/objtool/check.c
> +++ b/tools/objtool/check.c
> @@ -145,6 +145,7 @@ static bool __dead_end_function(struct objtool_file *file, struct symbol *func,
> "usercopy_abort",
> "machine_real_restart",
> "rewind_stack_do_exit",
> + "kunit_try_catch_throw",
> };
>
> if (!func)
> --
> 2.20.1
>