From: Jitao Shi <[email protected]>
Add documentation for DT properties supported by
ps8640 DSI-eDP converter.
Signed-off-by: Jitao Shi <[email protected]>
Acked-by: Rob Herring <[email protected]>
Reviewed-by: Philipp Zabel <[email protected]>
Signed-off-by: Ulrich Hecht <[email protected]>
Signed-off-by: Enric Balletbo i Serra <[email protected]>
---
I maintained the ack from Rob Herring and the review from Philipp
because in essence the only thing I did is migrate to YAML format and
check that no errors are reported via dtbs_check. Just let me know if
you're not agree.
Apart from this note that I removed the mode-sel property because is not
used and I renamed sleep-gpios to powerdown-gpios.
Changes in v22:
- Migrate to YAML format (Maxime Ripart)
- Remove mode-sel property.
- Rename sleep-gpios to powerdown-gpios.
Changes in v21: None
Changes in v19: None
Changes in v18: None
Changes in v17: None
Changes in v16: None
Changes in v15: None
Changes in v14: None
Changes in v13: None
Changes in v12: None
Changes in v11: None
.../bindings/display/bridge/ps8640.yaml | 112 ++++++++++++++++++
1 file changed, 112 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/ps8640.yaml
diff --git a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml
new file mode 100644
index 000000000000..5dff93641bea
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ps8640.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPI DSI to eDP Video Format Converter Device Tree Bindings
+
+maintainers:
+ - Nicolas Boichat <[email protected]>
+ - Enric Balletbo i Serra <[email protected]>
+
+description: |
+ The PS8640 is a low power MIPI-to-eDP video format converter supporting
+ mobile devices with embedded panel resolutions up to 2048 x 1536. The
+ device accepts a single channel of MIPI DSI v1.1, with up to four lanes
+ plus clock, at a transmission rate up to 1.5Gbit/sec per lane. The
+ device outputs eDP v1.4, one or two lanes, at a link rate of up to
+ 3.24Gbit/sec per lane.
+
+properties:
+ compatible:
+ const: parade,ps8640
+
+ reg:
+ maxItems: 1
+ description: Base I2C address of the device.
+
+ powerdown-gpios:
+ maxItems: 1
+ description: GPIO connected to active low powerdown.
+
+ reset-gpios:
+ maxItems: 1
+ description: GPIO connected to active low reset.
+
+ vdd12-supply:
+ maxItems: 1
+ description: Regulator for 1.2V digital core power.
+
+ vdd33-supply:
+ maxItems: 1
+ description: Regulator for 3.3V digital core power.
+
+ ports:
+ type: object
+ description:
+ A node containing DSI input & output port nodes with endpoint
+ definitions as documented in
+ Documentation/devicetree/bindings/media/video-interfaces.txt
+ Documentation/devicetree/bindings/graph.txt
+ properties:
+ port@0:
+ type: object
+ description: |
+ Video port for DSI input
+
+ port@1:
+ type: object
+ description: |
+ Video port for eDP output (panel or connector).
+
+ required:
+ - port@0
+
+required:
+ - compatible
+ - reg
+ - powerdown-gpios
+ - reset-gpios
+ - vdd12-supply
+ - vdd33-supply
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ps8640: edp-bridge@18 {
+ compatible = "parade,ps8640";
+ reg = <0x18>;
+ powerdown-gpios = <&pio 116 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>;
+ vdd12-supply = <&ps8640_fixed_1v2>;
+ vdd33-supply = <&mt6397_vgp2_reg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ ps8640_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ ps8640_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
+ };
+
--
2.20.1