2022-01-22 01:28:18

by Eugen Hristev

[permalink] [raw]
Subject: [PATCH v4 01/11] media: atmel: atmel-isc: replace 'stop' variable with vb2 calls

The stop variable is redundant as the state of the streaming can be obtained
by calling vb2_start_streaming_called(&isc->vb2_vidq) or by calling
vb2_is_busy(&isc->vb2_vidq).
Thus, remove the stop variable completely.

Suggested-by: Hans Verkuil <[email protected]>
Signed-off-by: Eugen Hristev <[email protected]>
---
Changes in v4:
- new patch

drivers/media/platform/atmel/atmel-isc-base.c | 12 +++++-------
drivers/media/platform/atmel/atmel-isc.h | 2 --
2 files changed, 5 insertions(+), 9 deletions(-)

diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
index db15770d5b88..9c62d0ae7887 100644
--- a/drivers/media/platform/atmel/atmel-isc-base.c
+++ b/drivers/media/platform/atmel/atmel-isc-base.c
@@ -362,7 +362,6 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count)
spin_lock_irqsave(&isc->dma_queue_lock, flags);

isc->sequence = 0;
- isc->stop = false;
reinit_completion(&isc->comp);

isc->cur_frm = list_first_entry(&isc->dma_queue,
@@ -403,8 +402,6 @@ static void isc_stop_streaming(struct vb2_queue *vq)

v4l2_ctrl_activate(isc->do_wb_ctrl, false);

- isc->stop = true;
-
/* Wait until the end of the current frame */
if (isc->cur_frm && !wait_for_completion_timeout(&isc->comp, 5 * HZ))
v4l2_err(&isc->v4l2_dev,
@@ -1029,7 +1026,7 @@ static int isc_s_fmt_vid_cap(struct file *file, void *priv,
{
struct isc_device *isc = video_drvdata(file);

- if (vb2_is_streaming(&isc->vb2_vidq))
+ if (vb2_is_busy(&isc->vb2_vidq))
return -EBUSY;

return isc_set_fmt(isc, f);
@@ -1236,7 +1233,8 @@ irqreturn_t isc_interrupt(int irq, void *dev_id)
isc->cur_frm = NULL;
}

- if (!list_empty(&isc->dma_queue) && !isc->stop) {
+ if (!list_empty(&isc->dma_queue) &&
+ vb2_start_streaming_called(&isc->vb2_vidq)) {
isc->cur_frm = list_first_entry(&isc->dma_queue,
struct isc_buffer, list);
list_del(&isc->cur_frm->list);
@@ -1244,7 +1242,7 @@ irqreturn_t isc_interrupt(int irq, void *dev_id)
isc_start_dma(isc);
}

- if (isc->stop)
+ if (!vb2_start_streaming_called(&isc->vb2_vidq))
complete(&isc->comp);

ret = IRQ_HANDLED;
@@ -1398,7 +1396,7 @@ static void isc_awb_work(struct work_struct *w)
int ret;

/* streaming is not active anymore */
- if (isc->stop)
+ if (!vb2_start_streaming_called(&isc->vb2_vidq))
return;

if (ctrls->hist_stat != HIST_ENABLED)
diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
index 07fa6dbf8460..5fbf52a9080b 100644
--- a/drivers/media/platform/atmel/atmel-isc.h
+++ b/drivers/media/platform/atmel/atmel-isc.h
@@ -201,7 +201,6 @@ struct isc_reg_offsets {
* @dma_queue: the queue for dma buffers
* @cur_frm: current isc frame/buffer
* @sequence: current frame number
- * @stop: true if isc is not streaming, false if streaming
* @comp: completion reference that signals frame completion
*
* @fmt: current v42l format
@@ -276,7 +275,6 @@ struct isc_device {
struct list_head dma_queue;
struct isc_buffer *cur_frm;
unsigned int sequence;
- bool stop;
struct completion comp;

struct v4l2_format fmt;
--
2.25.1


2022-02-09 08:11:47

by jacopo mondi

[permalink] [raw]
Subject: Re: [PATCH v4 01/11] media: atmel: atmel-isc: replace 'stop' variable with vb2 calls

Hi Eugen,

On Fri, Jan 21, 2022 at 03:14:06PM +0200, Eugen Hristev wrote:
> The stop variable is redundant as the state of the streaming can be obtained
> by calling vb2_start_streaming_called(&isc->vb2_vidq) or by calling
> vb2_is_busy(&isc->vb2_vidq).
> Thus, remove the stop variable completely.
>
> Suggested-by: Hans Verkuil <[email protected]>
> Signed-off-by: Eugen Hristev <[email protected]>

I trust yours and Hans' judgment here.
The patch looks sane
Reviewed-by: Jacopo Mondi <[email protected]>

Thanks
> ---
> Changes in v4:
> - new patch
>
> drivers/media/platform/atmel/atmel-isc-base.c | 12 +++++-------
> drivers/media/platform/atmel/atmel-isc.h | 2 --
> 2 files changed, 5 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
> index db15770d5b88..9c62d0ae7887 100644
> --- a/drivers/media/platform/atmel/atmel-isc-base.c
> +++ b/drivers/media/platform/atmel/atmel-isc-base.c
> @@ -362,7 +362,6 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count)
> spin_lock_irqsave(&isc->dma_queue_lock, flags);
>
> isc->sequence = 0;
> - isc->stop = false;
> reinit_completion(&isc->comp);
>
> isc->cur_frm = list_first_entry(&isc->dma_queue,
> @@ -403,8 +402,6 @@ static void isc_stop_streaming(struct vb2_queue *vq)
>
> v4l2_ctrl_activate(isc->do_wb_ctrl, false);
>
> - isc->stop = true;
> -
> /* Wait until the end of the current frame */
> if (isc->cur_frm && !wait_for_completion_timeout(&isc->comp, 5 * HZ))
> v4l2_err(&isc->v4l2_dev,
> @@ -1029,7 +1026,7 @@ static int isc_s_fmt_vid_cap(struct file *file, void *priv,
> {
> struct isc_device *isc = video_drvdata(file);
>
> - if (vb2_is_streaming(&isc->vb2_vidq))
> + if (vb2_is_busy(&isc->vb2_vidq))
> return -EBUSY;
>
> return isc_set_fmt(isc, f);
> @@ -1236,7 +1233,8 @@ irqreturn_t isc_interrupt(int irq, void *dev_id)
> isc->cur_frm = NULL;
> }
>
> - if (!list_empty(&isc->dma_queue) && !isc->stop) {
> + if (!list_empty(&isc->dma_queue) &&
> + vb2_start_streaming_called(&isc->vb2_vidq)) {
> isc->cur_frm = list_first_entry(&isc->dma_queue,
> struct isc_buffer, list);
> list_del(&isc->cur_frm->list);
> @@ -1244,7 +1242,7 @@ irqreturn_t isc_interrupt(int irq, void *dev_id)
> isc_start_dma(isc);
> }
>
> - if (isc->stop)
> + if (!vb2_start_streaming_called(&isc->vb2_vidq))
> complete(&isc->comp);
>
> ret = IRQ_HANDLED;
> @@ -1398,7 +1396,7 @@ static void isc_awb_work(struct work_struct *w)
> int ret;
>
> /* streaming is not active anymore */
> - if (isc->stop)
> + if (!vb2_start_streaming_called(&isc->vb2_vidq))
> return;
>
> if (ctrls->hist_stat != HIST_ENABLED)
> diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
> index 07fa6dbf8460..5fbf52a9080b 100644
> --- a/drivers/media/platform/atmel/atmel-isc.h
> +++ b/drivers/media/platform/atmel/atmel-isc.h
> @@ -201,7 +201,6 @@ struct isc_reg_offsets {
> * @dma_queue: the queue for dma buffers
> * @cur_frm: current isc frame/buffer
> * @sequence: current frame number
> - * @stop: true if isc is not streaming, false if streaming
> * @comp: completion reference that signals frame completion
> *
> * @fmt: current v42l format
> @@ -276,7 +275,6 @@ struct isc_device {
> struct list_head dma_queue;
> struct isc_buffer *cur_frm;
> unsigned int sequence;
> - bool stop;
> struct completion comp;
>
> struct v4l2_format fmt;
> --
> 2.25.1
>

2022-02-09 09:13:09

by Eugen Hristev

[permalink] [raw]
Subject: Re: [PATCH v4 01/11] media: atmel: atmel-isc: replace 'stop' variable with vb2 calls

On 2/7/22 12:46 PM, Jacopo Mondi wrote:
> Hi Eugen,
>
> On Fri, Jan 21, 2022 at 03:14:06PM +0200, Eugen Hristev wrote:
>> The stop variable is redundant as the state of the streaming can be obtained
>> by calling vb2_start_streaming_called(&isc->vb2_vidq) or by calling
>> vb2_is_busy(&isc->vb2_vidq).
>> Thus, remove the stop variable completely.
>>
>> Suggested-by: Hans Verkuil <[email protected]>
>> Signed-off-by: Eugen Hristev <[email protected]>
>
> I trust yours and Hans' judgment here.
> The patch looks sane
> Reviewed-by: Jacopo Mondi <[email protected]>
>
> Thanks
>> ---
>> Changes in v4:
>> - new patch
>>
>> drivers/media/platform/atmel/atmel-isc-base.c | 12 +++++-------
>> drivers/media/platform/atmel/atmel-isc.h | 2 --
>> 2 files changed, 5 insertions(+), 9 deletions(-)
>>
>> diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
>> index db15770d5b88..9c62d0ae7887 100644
>> --- a/drivers/media/platform/atmel/atmel-isc-base.c
>> +++ b/drivers/media/platform/atmel/atmel-isc-base.c
>> @@ -362,7 +362,6 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count)
>> spin_lock_irqsave(&isc->dma_queue_lock, flags);
>>
>> isc->sequence = 0;
>> - isc->stop = false;
>> reinit_completion(&isc->comp);
>>
>> isc->cur_frm = list_first_entry(&isc->dma_queue,
>> @@ -403,8 +402,6 @@ static void isc_stop_streaming(struct vb2_queue *vq)
>>
>> v4l2_ctrl_activate(isc->do_wb_ctrl, false);
>>
>> - isc->stop = true;
>> -
>> /* Wait until the end of the current frame */
>> if (isc->cur_frm && !wait_for_completion_timeout(&isc->comp, 5 * HZ))
>> v4l2_err(&isc->v4l2_dev,
>> @@ -1029,7 +1026,7 @@ static int isc_s_fmt_vid_cap(struct file *file, void *priv,
>> {
>> struct isc_device *isc = video_drvdata(file);
>>
>> - if (vb2_is_streaming(&isc->vb2_vidq))
>> + if (vb2_is_busy(&isc->vb2_vidq))
>> return -EBUSY;
>>
>> return isc_set_fmt(isc, f);
>> @@ -1236,7 +1233,8 @@ irqreturn_t isc_interrupt(int irq, void *dev_id)
>> isc->cur_frm = NULL;
>> }
>>
>> - if (!list_empty(&isc->dma_queue) && !isc->stop) {
>> + if (!list_empty(&isc->dma_queue) &&
>> + vb2_start_streaming_called(&isc->vb2_vidq)) {
>> isc->cur_frm = list_first_entry(&isc->dma_queue,
>> struct isc_buffer, list);
>> list_del(&isc->cur_frm->list);
>> @@ -1244,7 +1242,7 @@ irqreturn_t isc_interrupt(int irq, void *dev_id)
>> isc_start_dma(isc);
>> }
>>
>> - if (isc->stop)
>> + if (!vb2_start_streaming_called(&isc->vb2_vidq))

Hello Hans, Jacopo,

This patch has a problem here. In the IRQ context, I cannot tell whether
the stop streaming has been called or not.
When stop streaming is called, vb2_start_streaming_called still returns
true.
So in the IRQ context I cannot know if I have to program the next buffer
and start the next capture (next DMA), or I have to stop, and call
complete on the isc completion , such that stop streaming will release
all the other buffers.
To know this, it was previously done with the 'stop' variable which was
set when stop_streaming was called.
Any idea how to handle this with vb2_ calls ?

Or I would have to rework this patch and keep the 'stop' internal variable ?

Thanks,
Eugen


>> complete(&isc->comp);
>>
>> ret = IRQ_HANDLED;
>> @@ -1398,7 +1396,7 @@ static void isc_awb_work(struct work_struct *w)
>> int ret;
>>
>> /* streaming is not active anymore */
>> - if (isc->stop)
>> + if (!vb2_start_streaming_called(&isc->vb2_vidq))
>> return;
>>
>> if (ctrls->hist_stat != HIST_ENABLED)
>> diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
>> index 07fa6dbf8460..5fbf52a9080b 100644
>> --- a/drivers/media/platform/atmel/atmel-isc.h
>> +++ b/drivers/media/platform/atmel/atmel-isc.h
>> @@ -201,7 +201,6 @@ struct isc_reg_offsets {
>> * @dma_queue: the queue for dma buffers
>> * @cur_frm: current isc frame/buffer
>> * @sequence: current frame number
>> - * @stop: true if isc is not streaming, false if streaming
>> * @comp: completion reference that signals frame completion
>> *
>> * @fmt: current v42l format
>> @@ -276,7 +275,6 @@ struct isc_device {
>> struct list_head dma_queue;
>> struct isc_buffer *cur_frm;
>> unsigned int sequence;
>> - bool stop;
>> struct completion comp;
>>
>> struct v4l2_format fmt;
>> --
>> 2.25.1
>>