2020-01-01 22:47:35

by Yauhen Kharuzhy

Subject: [PATCH 3/3] dt-bindings: Add new chips to bq25890 binding documentation

Add bq25892, bq25895 and bq25896 to list of supported device IDs in the
bq25890 DT binding document.

Signed-off-by: Yauhen Kharuzhy <[email protected]>
---
Documentation/devicetree/bindings/power/supply/bq25890.txt | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/power/supply/bq25890.txt b/Documentation/devicetree/bindings/power/supply/bq25890.txt
index dc0568933359..dc9c8f76e06c 100644
--- a/Documentation/devicetree/bindings/power/supply/bq25890.txt
+++ b/Documentation/devicetree/bindings/power/supply/bq25890.txt
@@ -1,11 +1,14 @@
Binding for TI bq25890 Li-Ion Charger

-This driver will support the bq25896 and the bq25890. There are other ICs
-in the same family but those have not been tested.
+This driver will support the bq25892, the bq25896 and the bq25890. There are
+other ICs in the same family but those have not been tested.

Required properties:
- compatible: Should contain one of the following:
* "ti,bq25890"
+ * "ti,bq25892"
+ * "ti,bq25895"
+ * "ti,bq25896"
- reg: integer, i2c address of the device.
- ti,battery-regulation-voltage: integer, maximum charging voltage (in uV);
- ti,charge-current: integer, maximum charging current (in uA);
--
2.25.0.rc0

2020-01-08 16:53:26

by Rob Herring

Subject: Re: [PATCH 3/3] dt-bindings: Add new chips to bq25890 binding documentation

On Thu, 2 Jan 2020 01:46:27 +0300, Yauhen Kharuzhy wrote:
> Add bq25892, bq25895 and bq25896 to list of supported device IDs in the
> bq25890 DT binding document.
>
> Signed-off-by: Yauhen Kharuzhy <[email protected]>
> ---
> Documentation/devicetree/bindings/power/supply/bq25890.txt | 7 +++++--
> 1 file changed, 5 insertions(+), 2 deletions(-)
>

Acked-by: Rob Herring <[email protected]>