From: Chen-Yu Tsai <[email protected]>
A few clocks from the CCU were exported later, and references to them in
the device tree were using raw numbers.
Now that the DT binding header changes are in as well, switch to the
macros for more clarity.
Signed-off-by: Chen-Yu Tsai <[email protected]>
---
arch/arm/boot/dts/sun5i.dtsi | 2 +-
arch/arm/boot/dts/sun8i-a83t.dtsi | 6 +++---
arch/arm/boot/dts/sun8i-r40.dtsi | 2 +-
arch/arm/boot/dts/sunxi-h3-h5.dtsi | 7 ++++---
4 files changed, 9 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
index 9f0b645fd45e..0b526e6e5a95 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -185,7 +185,7 @@ ve_sram: sram-section@0 {
mbus: dram-controller@1c01000 {
compatible = "allwinner,sun5i-a13-mbus";
reg = <0x01c01000 0x1000>;
- clocks = <&ccu 99>;
+ clocks = <&ccu CLK_MBUS>;
dma-ranges = <0x00000000 0x40000000 0x20000000>;
#interconnect-cells = <1>;
};
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 93a6df11cb18..74ac7ee9383c 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -1006,9 +1006,9 @@ emac: ethernet@1c30000 {
reg = <0x01c30000 0x104>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
- resets = <&ccu 13>;
+ resets = <&ccu CLK_BUS_EMAC>;
reset-names = "stmmaceth";
- clocks = <&ccu 27>;
+ clocks = <&ccu RST_BUS_EMAC>;
clock-names = "stmmaceth";
status = "disabled";
@@ -1102,7 +1102,7 @@ r_ccu: clock@1f01400 {
compatible = "allwinner,sun8i-a83t-r-ccu";
reg = <0x01f01400 0x400>;
clocks = <&osc24M>, <&osc16Md512>, <&osc16M>,
- <&ccu 6>;
+ <&ccu CLK_PLL_PERIPH>;
clock-names = "hosc", "losc", "iosc", "pll-periph";
#clock-cells = <1>;
#reset-cells = <1>;
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index 84d240c39f0f..40e2f9b710cd 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -913,7 +913,7 @@ hdmi_phy: hdmi-phy@1ef0000 {
compatible = "allwinner,sun8i-r40-hdmi-phy";
reg = <0x01ef0000 0x10000>;
clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>,
- <&ccu 7>, <&ccu 16>;
+ <&ccu CLK_PLL_VIDEO0>, <&ccu CLK_PLL_VIDEO1>;
clock-names = "bus", "mod", "pll-0", "pll-1";
resets = <&ccu RST_BUS_HDMI0>;
reset-names = "phy";
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 6e68ed831015..5e9c3060aa08 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -559,7 +559,7 @@ external_mdio: mdio@2 {
mbus: dram-controller@1c62000 {
compatible = "allwinner,sun8i-h3-mbus";
reg = <0x01c62000 0x1000>;
- clocks = <&ccu 113>;
+ clocks = <&ccu CLK_MBUS>;
dma-ranges = <0x00000000 0x40000000 0xc0000000>;
#interconnect-cells = <1>;
};
@@ -817,7 +817,7 @@ hdmi_phy: hdmi-phy@1ef0000 {
compatible = "allwinner,sun8i-h3-hdmi-phy";
reg = <0x01ef0000 0x10000>;
clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
- <&ccu 6>;
+ <&ccu CLK_PLL_VIDEO>;
clock-names = "bus", "mod", "pll-0";
resets = <&ccu RST_BUS_HDMI0>;
reset-names = "phy";
@@ -837,7 +837,8 @@ rtc: rtc@1f00000 {
r_ccu: clock@1f01400 {
compatible = "allwinner,sun8i-h3-r-ccu";
reg = <0x01f01400 0x100>;
- clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, <&ccu 9>;
+ clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
+ <&ccu CLK_PLL_PERIPH0>;
clock-names = "hosc", "losc", "iosc", "pll-periph";
#clock-cells = <1>;
#reset-cells = <1>;
--
2.24.1
On Mon, Jan 06, 2020 at 04:59:33PM +0800, Chen-Yu Tsai wrote:
> From: Chen-Yu Tsai <[email protected]>
>
> A few clocks from the CCU were exported later, and references to them in
> the device tree were using raw numbers.
>
> Now that the DT binding header changes are in as well, switch to the
> macros for more clarity.
>
> Signed-off-by: Chen-Yu Tsai <[email protected]>
Applied, thanks!
Maxime