From: Colin Ian King <[email protected]>
Currently when the call to dev_get_platdata returns null the driver issues
a warning and then later dereferences the null pointer. Avoid this issue
by returning -EPROBE_DEFER errror rather when the platform data is null.
Addresses-Coverity: ("Dereference after null check")
Fixes: 211010aeb097 ("dmaengine: ti: omap-dma: Pass sdma auxdata to driver and use it")
Signed-off-by: Colin Ian King <[email protected]>
---
drivers/dma/ti/omap-dma.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/dma/ti/omap-dma.c b/drivers/dma/ti/omap-dma.c
index fc8f7b2fc7b3..335c3fa7a3b1 100644
--- a/drivers/dma/ti/omap-dma.c
+++ b/drivers/dma/ti/omap-dma.c
@@ -1658,8 +1658,10 @@ static int omap_dma_probe(struct platform_device *pdev)
if (conf) {
od->cfg = conf;
od->plat = dev_get_platdata(&pdev->dev);
- if (!od->plat)
+ if (!od->plat) {
dev_warn(&pdev->dev, "no sdma auxdata needed?\n");
+ return -EPROBE_DEFER;
+ }
} else {
od->cfg = &default_cfg;
--
2.24.0
Colin,
On 06/01/2020 14.23, Colin King wrote:
> From: Colin Ian King <[email protected]>
>
> Currently when the call to dev_get_platdata returns null the driver issues
> a warning and then later dereferences the null pointer. Avoid this issue
> by returning -EPROBE_DEFER errror rather when the platform data is null.
Thank you for noticing it!
Acked-by: Peter Ujfalusi <[email protected]>
> Addresses-Coverity: ("Dereference after null check")
> Fixes: 211010aeb097 ("dmaengine: ti: omap-dma: Pass sdma auxdata to driver and use it")
> Signed-off-by: Colin Ian King <[email protected]>
> ---
> drivers/dma/ti/omap-dma.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/dma/ti/omap-dma.c b/drivers/dma/ti/omap-dma.c
> index fc8f7b2fc7b3..335c3fa7a3b1 100644
> --- a/drivers/dma/ti/omap-dma.c
> +++ b/drivers/dma/ti/omap-dma.c
> @@ -1658,8 +1658,10 @@ static int omap_dma_probe(struct platform_device *pdev)
> if (conf) {
> od->cfg = conf;
> od->plat = dev_get_platdata(&pdev->dev);
> - if (!od->plat)
> + if (!od->plat) {
> dev_warn(&pdev->dev, "no sdma auxdata needed?\n");
> + return -EPROBE_DEFER;
> + }
> } else {
> od->cfg = &default_cfg;
>
>
- Péter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Colin, Tony,
On 07/01/2020 13.59, Peter Ujfalusi wrote:
> Colin,
>
> On 06/01/2020 14.23, Colin King wrote:
>> From: Colin Ian King <[email protected]>
>>
>> Currently when the call to dev_get_platdata returns null the driver issues
>> a warning and then later dereferences the null pointer. Avoid this issue
>> by returning -EPROBE_DEFER errror rather when the platform data is null.
>
> Thank you for noticing it!
>
> Acked-by: Peter Ujfalusi <[email protected]>
>
>> Addresses-Coverity: ("Dereference after null check")
>> Fixes: 211010aeb097 ("dmaengine: ti: omap-dma: Pass sdma auxdata to driver and use it")
>> Signed-off-by: Colin Ian King <[email protected]>
>> ---
>> drivers/dma/ti/omap-dma.c | 4 +++-
>> 1 file changed, 3 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/dma/ti/omap-dma.c b/drivers/dma/ti/omap-dma.c
>> index fc8f7b2fc7b3..335c3fa7a3b1 100644
>> --- a/drivers/dma/ti/omap-dma.c
>> +++ b/drivers/dma/ti/omap-dma.c
>> @@ -1658,8 +1658,10 @@ static int omap_dma_probe(struct platform_device *pdev)
>> if (conf) {
>> od->cfg = conf;
>> od->plat = dev_get_platdata(&pdev->dev);
>> - if (!od->plat)
>> + if (!od->plat) {
>> dev_warn(&pdev->dev, "no sdma auxdata needed?\n");
>> + return -EPROBE_DEFER;
I think we should make the print as dev_err("&pdev->dev,
"omap_system_dma_plat_info is missing") and return with -ENODEV. The
omap_system_dma_plat_info is _needed_ and if we have booted with device
tree it is not going to appear later.
Tony, what do you think?
>> + }
>> } else {
>> od->cfg = &default_cfg;
>>
>>
- Péter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
* Peter Ujfalusi <[email protected]> [200108 07:20]:
> Colin, Tony,
>
> On 07/01/2020 13.59, Peter Ujfalusi wrote:
> > Colin,
> >
> > On 06/01/2020 14.23, Colin King wrote:
> >> From: Colin Ian King <[email protected]>
> >>
> >> Currently when the call to dev_get_platdata returns null the driver issues
> >> a warning and then later dereferences the null pointer. Avoid this issue
> >> by returning -EPROBE_DEFER errror rather when the platform data is null.
> >
> > Thank you for noticing it!
> >
> > Acked-by: Peter Ujfalusi <[email protected]>
> >
> >> Addresses-Coverity: ("Dereference after null check")
> >> Fixes: 211010aeb097 ("dmaengine: ti: omap-dma: Pass sdma auxdata to driver and use it")
> >> Signed-off-by: Colin Ian King <[email protected]>
> >> ---
> >> drivers/dma/ti/omap-dma.c | 4 +++-
> >> 1 file changed, 3 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/dma/ti/omap-dma.c b/drivers/dma/ti/omap-dma.c
> >> index fc8f7b2fc7b3..335c3fa7a3b1 100644
> >> --- a/drivers/dma/ti/omap-dma.c
> >> +++ b/drivers/dma/ti/omap-dma.c
> >> @@ -1658,8 +1658,10 @@ static int omap_dma_probe(struct platform_device *pdev)
> >> if (conf) {
> >> od->cfg = conf;
> >> od->plat = dev_get_platdata(&pdev->dev);
> >> - if (!od->plat)
> >> + if (!od->plat) {
> >> dev_warn(&pdev->dev, "no sdma auxdata needed?\n");
> >> + return -EPROBE_DEFER;
>
> I think we should make the print as dev_err("&pdev->dev,
> "omap_system_dma_plat_info is missing") and return with -ENODEV. The
> omap_system_dma_plat_info is _needed_ and if we have booted with device
> tree it is not going to appear later.
>
> Tony, what do you think?
Yes makes sense, the auxdata is needed for the quirks for now.
Eventually the quirks can be set directly in the dmaengine driver
based on compatible and soc_device_match().
Regards,
Tony