The RK3399 variant does not have postproc_regs declared,
this can cause a NULL pointer dereference trying to decode:
[ 89.331359] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 89.352804] Call trace:
[ 89.353191] hantro_postproc_disable+0x20/0xe8 [hantro_vpu]
[ 89.354056] hantro_start_prepare_run+0x58/0x68 [hantro_vpu]
[ 89.354923] hantro_h264_dec_prepare_run+0x30/0x6f0 [hantro_vpu]
[ 89.355846] rk3399_vpu_h264_dec_run+0x1c/0x14a8 [hantro_vpu]
[ 89.356748] device_run+0xa4/0xb8 [hantro_vpu]
Fix this by adding a NULL check in hantro_postproc_enable/disable.
Fixes: 8c2d66b036c7 ("media: hantro: Support color conversion via post-processing")
Signed-off-by: Jonas Karlman <[email protected]>
---
drivers/staging/media/hantro/hantro_postproc.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/staging/media/hantro/hantro_postproc.c b/drivers/staging/media/hantro/hantro_postproc.c
index b55730011d0c..28a85d301d7f 100644
--- a/drivers/staging/media/hantro/hantro_postproc.c
+++ b/drivers/staging/media/hantro/hantro_postproc.c
@@ -57,6 +57,9 @@ void hantro_postproc_enable(struct hantro_ctx *ctx)
u32 src_pp_fmt, dst_pp_fmt;
dma_addr_t dst_dma;
+ if (!vpu->variant->postproc_regs)
+ return;
+
/* Turn on pipeline mode. Must be done first. */
HANTRO_PP_REG_WRITE_S(vpu, pipeline_en, 0x1);
@@ -138,5 +141,8 @@ void hantro_postproc_disable(struct hantro_ctx *ctx)
{
struct hantro_dev *vpu = ctx->dev;
+ if (!vpu->variant->postproc_regs)
+ return;
+
HANTRO_PP_REG_WRITE_S(vpu, pipeline_en, 0x0);
}
--
2.17.1