Enable the USB host port on the APx4 development board.
Signed-off-by: Aapo Vienamo <[email protected]>
---
arch/arm/boot/dts/imx28-apx4devkit.dts | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
index 3a184d13887b..c5acc19c982d 100644
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -183,10 +183,20 @@ auart2: serial@8006e000 {
pinctrl-0 = <&auart2_2pins_a>;
status = "okay";
};
+
+ usbphy1: usbphy@8007e000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_pins_a>;
+ status = "okay";
+ };
};
};
ahb@80080000 {
+ usb1: usb@80090000 {
+ status = "okay";
+ };
+
mac0: ethernet@800f0000 {
phy-mode = "rmii";
pinctrl-names = "default";
--
2.24.1
On Sun, Jan 12, 2020 at 04:00:39PM +0200, Aapo Vienamo wrote:
> Enable the USB host port on the APx4 development board.
>
> Signed-off-by: Aapo Vienamo <[email protected]>
Applied, thanks.