Convert the STM32 SPDIFRX bindings to DT schema format using json-schema.
Signed-off-by: Olivier Moysan <[email protected]>
---
.../bindings/sound/st,stm32-spdifrx.txt | 56 -------------
.../bindings/sound/st,stm32-spdifrx.yaml | 80 +++++++++++++++++++
2 files changed, 80 insertions(+), 56 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt
create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt
deleted file mode 100644
index 33826f2459fa..000000000000
--- a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-STMicroelectronics STM32 S/PDIF receiver (SPDIFRX).
-
-The SPDIFRX peripheral, is designed to receive an S/PDIF flow compliant with
-IEC-60958 and IEC-61937.
-
-Required properties:
- - compatible: should be "st,stm32h7-spdifrx"
- - reg: cpu DAI IP base address and size
- - clocks: must contain an entry for kclk (used as S/PDIF signal reference)
- - clock-names: must contain "kclk"
- - interrupts: cpu DAI interrupt line
- - dmas: DMA specifiers for audio data DMA and iec control flow DMA
- See STM32 DMA bindings, Documentation/devicetree/bindings/dma/stm32-dma.txt
- - dma-names: two dmas have to be defined, "rx" and "rx-ctrl"
-
-Optional properties:
- - resets: Reference to a reset controller asserting the SPDIFRX
-
-The device node should contain one 'port' child node with one child 'endpoint'
-node, according to the bindings defined in Documentation/devicetree/bindings/
-graph.txt.
-
-Example:
-spdifrx: spdifrx@40004000 {
- compatible = "st,stm32h7-spdifrx";
- reg = <0x40004000 0x400>;
- clocks = <&rcc SPDIFRX_CK>;
- clock-names = "kclk";
- interrupts = <97>;
- dmas = <&dmamux1 2 93 0x400 0x0>,
- <&dmamux1 3 94 0x400 0x0>;
- dma-names = "rx", "rx-ctrl";
- pinctrl-0 = <&spdifrx_pins>;
- pinctrl-names = "default";
-
- spdifrx_port: port {
- cpu_endpoint: endpoint {
- remote-endpoint = <&codec_endpoint>;
- };
- };
-};
-
-spdif_in: spdif-in {
- compatible = "linux,spdif-dir";
-
- codec_port: port {
- codec_endpoint: endpoint {
- remote-endpoint = <&cpu_endpoint>;
- };
- };
-};
-
-soundcard {
- compatible = "audio-graph-card";
- dais = <&spdifrx_port>;
-};
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml
new file mode 100644
index 000000000000..ab8e9d74ac3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/st,stm32-spdifrx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 S/PDIF receiver (SPDIFRX)
+
+maintainers:
+ - Olivier Moysan <[email protected]>
+
+description: |
+ The SPDIFRX peripheral, is designed to receive an S/PDIF flow compliant with
+ IEC-60958 and IEC-61937.
+
+properties:
+ compatible:
+ enum:
+ - st,stm32h7-spdifrx
+
+ "#sound-dai-cells":
+ const: 0
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: kclk
+
+ interrupts:
+ maxItems: 1
+
+ dmas:
+ items:
+ - description: audio data capture DMA
+ - description: IEC status bits capture DMA
+ minItems: 1
+ maxItems: 2
+
+ dma-names:
+ items:
+ - const: rx
+ - const: rx-ctrl
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - "#sound-dai-cells"
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+ - dmas
+ - dma-names
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/stm32mp1-clks.h>
+ spdifrx: spdifrx@40004000 {
+ compatible = "st,stm32h7-spdifrx";
+ #sound-dai-cells = <0>;
+ reg = <0x40004000 0x400>;
+ clocks = <&rcc SPDIF_K>;
+ clock-names = "kclk";
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 2 93 0x400 0x0>,
+ <&dmamux1 3 94 0x400 0x0>;
+ dma-names = "rx", "rx-ctrl";
+ pinctrl-0 = <&spdifrx_pins>;
+ pinctrl-names = "default";
+ };
+
+...
--
2.17.1
On Mon, Jan 13, 2020 at 05:19:54PM +0100, Olivier Moysan wrote:
> Convert the STM32 SPDIFRX bindings to DT schema format using json-schema.
>
> Signed-off-by: Olivier Moysan <[email protected]>
> ---
> .../bindings/sound/st,stm32-spdifrx.txt | 56 -------------
> .../bindings/sound/st,stm32-spdifrx.yaml | 80 +++++++++++++++++++
> 2 files changed, 80 insertions(+), 56 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt
> create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml
>
> diff --git a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt
> deleted file mode 100644
> index 33826f2459fa..000000000000
> --- a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt
> +++ /dev/null
> @@ -1,56 +0,0 @@
> -STMicroelectronics STM32 S/PDIF receiver (SPDIFRX).
> -
> -The SPDIFRX peripheral, is designed to receive an S/PDIF flow compliant with
> -IEC-60958 and IEC-61937.
> -
> -Required properties:
> - - compatible: should be "st,stm32h7-spdifrx"
> - - reg: cpu DAI IP base address and size
> - - clocks: must contain an entry for kclk (used as S/PDIF signal reference)
> - - clock-names: must contain "kclk"
> - - interrupts: cpu DAI interrupt line
> - - dmas: DMA specifiers for audio data DMA and iec control flow DMA
> - See STM32 DMA bindings, Documentation/devicetree/bindings/dma/stm32-dma.txt
> - - dma-names: two dmas have to be defined, "rx" and "rx-ctrl"
> -
> -Optional properties:
> - - resets: Reference to a reset controller asserting the SPDIFRX
> -
> -The device node should contain one 'port' child node with one child 'endpoint'
> -node, according to the bindings defined in Documentation/devicetree/bindings/
> -graph.txt.
> -
> -Example:
> -spdifrx: spdifrx@40004000 {
> - compatible = "st,stm32h7-spdifrx";
> - reg = <0x40004000 0x400>;
> - clocks = <&rcc SPDIFRX_CK>;
> - clock-names = "kclk";
> - interrupts = <97>;
> - dmas = <&dmamux1 2 93 0x400 0x0>,
> - <&dmamux1 3 94 0x400 0x0>;
> - dma-names = "rx", "rx-ctrl";
> - pinctrl-0 = <&spdifrx_pins>;
> - pinctrl-names = "default";
> -
> - spdifrx_port: port {
> - cpu_endpoint: endpoint {
> - remote-endpoint = <&codec_endpoint>;
> - };
> - };
> -};
> -
> -spdif_in: spdif-in {
> - compatible = "linux,spdif-dir";
> -
> - codec_port: port {
> - codec_endpoint: endpoint {
> - remote-endpoint = <&cpu_endpoint>;
> - };
> - };
> -};
> -
> -soundcard {
> - compatible = "audio-graph-card";
> - dais = <&spdifrx_port>;
> -};
> diff --git a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml
> new file mode 100644
> index 000000000000..ab8e9d74ac3c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml
> @@ -0,0 +1,80 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/st,stm32-spdifrx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: STMicroelectronics STM32 S/PDIF receiver (SPDIFRX)
> +
> +maintainers:
> + - Olivier Moysan <[email protected]>
> +
> +description: |
> + The SPDIFRX peripheral, is designed to receive an S/PDIF flow compliant with
> + IEC-60958 and IEC-61937.
> +
> +properties:
> + compatible:
> + enum:
> + - st,stm32h7-spdifrx
> +
> + "#sound-dai-cells":
> + const: 0
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + items:
> + - const: kclk
> +
> + interrupts:
> + maxItems: 1
> +
> + dmas:
> + items:
> + - description: audio data capture DMA
> + - description: IEC status bits capture DMA
> + minItems: 1
> + maxItems: 2
> +
> + dma-names:
> + items:
> + - const: rx
> + - const: rx-ctrl
> +
> + resets:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - "#sound-dai-cells"
> + - reg
> + - clocks
> + - clock-names
> + - interrupts
> + - dmas
> + - dma-names
Needs a:
additionalProperties: false
With that,
Reviewed-by: Rob Herring <[email protected]>
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/stm32mp1-clks.h>
> + spdifrx: spdifrx@40004000 {
> + compatible = "st,stm32h7-spdifrx";
> + #sound-dai-cells = <0>;
> + reg = <0x40004000 0x400>;
> + clocks = <&rcc SPDIF_K>;
> + clock-names = "kclk";
> + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&dmamux1 2 93 0x400 0x0>,
> + <&dmamux1 3 94 0x400 0x0>;
> + dma-names = "rx", "rx-ctrl";
> + pinctrl-0 = <&spdifrx_pins>;
> + pinctrl-names = "default";
> + };
> +
> +...
> --
> 2.17.1
>