The Denali NAND controller IP has separate reset control for the
controller core and registers.
Add the reset-names, and one more phandle accordingly. This is the
approved DT-binding.
Signed-off-by: Masahiro Yamada <[email protected]>
---
arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi | 3 ++-
arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 3 ++-
arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi | 3 ++-
3 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
index 8ec40a0b8b1e..5b18bda9c5a6 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
@@ -633,7 +633,8 @@
pinctrl-0 = <&pinctrl_nand>;
clock-names = "nand", "nand_x", "ecc";
clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
- resets = <&sys_rst 2>;
+ reset-names = "nand", "reg";
+ resets = <&sys_rst 2>, <&sys_rst 2>;
};
};
};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index b658f2b641e2..f2dc5f695020 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -937,7 +937,8 @@
pinctrl-0 = <&pinctrl_nand>;
clock-names = "nand", "nand_x", "ecc";
clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
- resets = <&sys_rst 2>;
+ reset-names = "nand", "reg";
+ resets = <&sys_rst 2>, <&sys_rst 2>;
};
};
};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
index d6f6cee4d549..73e7e1203b09 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
@@ -795,7 +795,8 @@
pinctrl-0 = <&pinctrl_nand>;
clock-names = "nand", "nand_x", "ecc";
clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
- resets = <&sys_rst 2>;
+ reset-names = "nand", "reg";
+ resets = <&sys_rst 2>, <&sys_rst 2>;
};
};
};
--
2.17.1