Add trip points and cooling maps for GPU thermal zone for Odroid
XU3/XU4/HC1 boards. Trip points are based on the CPU thermal zone for the
those boards.
Signed-off-by: Marek Szyprowski <[email protected]>
---
arch/arm/boot/dts/exynos5422-odroidhc1.dts | 32 ++++++++++
.../boot/dts/exynos5422-odroidxu3-common.dtsi | 59 +++++++++++++++++++
2 files changed, 91 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
index f163206265bb..8f38ef5bff55 100644
--- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
@@ -215,6 +215,38 @@
};
};
};
+ gpu_thermal: gpu-thermal {
+ thermal-sensors = <&tmu_gpu 0>;
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+ trips {
+ gpu_alert0: gpu-alert-0 {
+ temperature = <70000>;
+ hysteresis = <10000>;
+ type = "active";
+ };
+ gpu_alert1: gpu-alert-1 {
+ temperature = <85000>;
+ hysteresis = <10000>;
+ type = "active";
+ };
+ gpu_crit0: gpu-crit-0 {
+ temperature = <120000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&gpu_alert0>;
+ cooling-device = <&gpu 0 2>;
+ };
+ map1 {
+ trip = <&gpu_alert1>;
+ cooling-device = <&gpu 3 6>;
+ };
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 1865a708b49f..5da2d81e3be2 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -357,6 +357,65 @@
};
};
};
+ gpu_thermal: gpu-thermal {
+ thermal-sensors = <&tmu_gpu 0>;
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+ trips {
+ gpu_alert0: gpu-alert-0 {
+ temperature = <50000>;
+ hysteresis = <5000>;
+ type = "active";
+ };
+ gpu_alert1: gpu-alert-1 {
+ temperature = <60000>;
+ hysteresis = <5000>;
+ type = "active";
+ };
+ gpu_alert2: gpu-alert-2 {
+ temperature = <70000>;
+ hysteresis = <5000>;
+ type = "active";
+ };
+ gpu_crit0: gpu-crit-0 {
+ temperature = <120000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ gpu_alert3: gpu-alert-3 {
+ temperature = <70000>;
+ hysteresis = <10000>;
+ type = "passive";
+ };
+ gpu_alert4: gpu-alert-4 {
+ temperature = <85000>;
+ hysteresis = <10000>;
+ type = "passive";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&gpu_alert0>;
+ cooling-device = <&fan0 0 1>;
+ };
+ map1 {
+ trip = <&gpu_alert1>;
+ cooling-device = <&fan0 1 2>;
+ };
+ map2 {
+ trip = <&gpu_alert2>;
+ cooling-device = <&fan0 2 3>;
+ };
+ map3 {
+ trip = <&gpu_alert3>;
+ cooling-device = <&gpu 0 2>;
+ };
+ map4 {
+ trip = <&gpu_alert4>;
+ cooling-device = <&gpu 3 6>;
+ };
+ };
+ };
};
};
--
2.17.1
Panfrost driver provides a devfreq driver for the Mali GPU and allows to
scale GPU core frequency. Enable support for devfreq thermal integration
to enable cooling of GPU thermal zone by reducing GPU core frequency.
This fixes following warning during boot on Exynos5422-based Odroid XU4:
panfrost 11800000.gpu: [drm:panfrost_devfreq_init] Failed to register cooling device
Signed-off-by: Marek Szyprowski <[email protected]>
---
arch/arm/configs/exynos_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index c05263de08a5..d80dbdaf00f8 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -155,6 +155,7 @@ CONFIG_SENSORS_NTC_THERMISTOR=y
CONFIG_SENSORS_PWM_FAN=y
CONFIG_SENSORS_INA2XX=y
CONFIG_CPU_THERMAL=y
+CONFIG_DEVFREQ_THERMAL=y
CONFIG_THERMAL_EMULATION=y
CONFIG_WATCHDOG=y
CONFIG_S3C2410_WATCHDOG=y
--
2.17.1
On Fri, Jan 17, 2020 at 01:34:46PM +0100, Marek Szyprowski wrote:
> Add trip points and cooling maps for GPU thermal zone for Odroid
> XU3/XU4/HC1 boards. Trip points are based on the CPU thermal zone for the
> those boards.
>
> Signed-off-by: Marek Szyprowski <[email protected]>
> ---
> arch/arm/boot/dts/exynos5422-odroidhc1.dts | 32 ++++++++++
> .../boot/dts/exynos5422-odroidxu3-common.dtsi | 59 +++++++++++++++++++
> 2 files changed, 91 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
> index f163206265bb..8f38ef5bff55 100644
> --- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts
> +++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
> @@ -215,6 +215,38 @@
> };
> };
> };
> + gpu_thermal: gpu-thermal {
> + thermal-sensors = <&tmu_gpu 0>;
> + polling-delay-passive = <250>;
> + polling-delay = <0>;
These should not be needed - you do not add more than 4 thermal zones.
Best regards,
Krzysztof
On Fri, Jan 17, 2020 at 01:34:47PM +0100, Marek Szyprowski wrote:
> Panfrost driver provides a devfreq driver for the Mali GPU and allows to
> scale GPU core frequency. Enable support for devfreq thermal integration
> to enable cooling of GPU thermal zone by reducing GPU core frequency.
>
> This fixes following warning during boot on Exynos5422-based Odroid XU4:
>
> panfrost 11800000.gpu: [drm:panfrost_devfreq_init] Failed to register cooling device
>
> Signed-off-by: Marek Szyprowski <[email protected]>
> ---
> arch/arm/configs/exynos_defconfig | 1 +
Thanks, applied.
Best regards,
Krzysztof