This patch adds a platform driver for supporting keyboard and mouse
interface of SGI IOC3 chips.
Signed-off-by: Thomas Bogendoerfer <[email protected]>
---
Changes in v2:
- track that serio is started before pushing data to it
drivers/input/serio/Kconfig | 10 ++
drivers/input/serio/Makefile | 1 +
drivers/input/serio/ioc3kbd.c | 214 ++++++++++++++++++++++++++++++++++
3 files changed, 225 insertions(+)
create mode 100644 drivers/input/serio/ioc3kbd.c
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index f3e18f8ef9ca..373a1646019e 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -165,6 +165,16 @@ config SERIO_MACEPS2
To compile this driver as a module, choose M here: the
module will be called maceps2.
+config SERIO_SGI_IOC3
+ tristate "SGI IOC3 PS/2 controller"
+ depends on SGI_MFD_IOC3
+ help
+ Say Y here if you have an SGI Onyx2, SGI Octane or IOC3 PCI card
+ and you want to attach and use a keyboard, mouse, or both.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ioc3kbd.
+
config SERIO_LIBPS2
tristate "PS/2 driver library"
depends on SERIO_I8042 || SERIO_I8042=n
diff --git a/drivers/input/serio/Makefile b/drivers/input/serio/Makefile
index 67950a5ccb3f..6d97bad7b844 100644
--- a/drivers/input/serio/Makefile
+++ b/drivers/input/serio/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_HIL_MLC) += hp_sdc_mlc.o hil_mlc.o
obj-$(CONFIG_SERIO_PCIPS2) += pcips2.o
obj-$(CONFIG_SERIO_PS2MULT) += ps2mult.o
obj-$(CONFIG_SERIO_MACEPS2) += maceps2.o
+obj-$(CONFIG_SERIO_SGI_IOC3) += ioc3kbd.o
obj-$(CONFIG_SERIO_LIBPS2) += libps2.o
obj-$(CONFIG_SERIO_RAW) += serio_raw.o
obj-$(CONFIG_SERIO_AMS_DELTA) += ams_delta_serio.o
diff --git a/drivers/input/serio/ioc3kbd.c b/drivers/input/serio/ioc3kbd.c
new file mode 100644
index 000000000000..3decbaff40cc
--- /dev/null
+++ b/drivers/input/serio/ioc3kbd.c
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SGI IOC3 PS/2 controller driver for linux
+ *
+ * Copyright (C) 2019 Thomas Bogendoerfer <[email protected]>
+ *
+ * Based on code Copyright (C) 2005 Stanislaw Skowronek <[email protected]>
+ * Copyright (C) 2009 Johannes Dickgreber <[email protected]>
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/serio.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/sn/ioc3.h>
+
+struct ioc3kbd_data {
+ struct ioc3_serioregs __iomem *regs;
+ struct serio *kbd, *aux;
+ bool kbd_exists, aux_exists;
+ int irq;
+};
+
+static int ioc3kbd_wait(struct ioc3_serioregs __iomem *regs, u32 mask)
+{
+ unsigned long timeout = 0;
+
+ while ((readl(®s->km_csr) & mask) && (timeout < 250)) {
+ udelay(50);
+ timeout++;
+ }
+ return (timeout >= 250) ? -ETIMEDOUT : 0;
+}
+
+static int ioc3kbd_write(struct serio *dev, u8 val)
+{
+ struct ioc3kbd_data *d = dev->port_data;
+ int ret;
+
+ ret = ioc3kbd_wait(d->regs, KM_CSR_K_WRT_PEND);
+ if (ret)
+ return ret;
+
+ writel(val, &d->regs->k_wd);
+
+ return 0;
+}
+
+static int ioc3kbd_start(struct serio *dev)
+{
+ struct ioc3kbd_data *d = dev->port_data;
+
+ d->kbd_exists = true;
+ return 0;
+}
+
+static void ioc3kbd_stop(struct serio *dev)
+{
+ struct ioc3kbd_data *d = dev->port_data;
+
+ d->kbd_exists = false;
+}
+
+static int ioc3aux_write(struct serio *dev, u8 val)
+{
+ struct ioc3kbd_data *d = dev->port_data;
+ int ret;
+
+ ret = ioc3kbd_wait(d->regs, KM_CSR_M_WRT_PEND);
+ if (ret)
+ return ret;
+
+ writel(val, &d->regs->m_wd);
+
+ return 0;
+}
+
+static int ioc3aux_start(struct serio *dev)
+{
+ struct ioc3kbd_data *d = dev->port_data;
+
+ d->aux_exists = true;
+ return 0;
+}
+
+static void ioc3aux_stop(struct serio *dev)
+{
+ struct ioc3kbd_data *d = dev->port_data;
+
+ d->aux_exists = false;
+}
+
+static void ioc3kbd_process_data(struct serio *dev, u32 data)
+{
+ if (data & KM_RD_VALID_0)
+ serio_interrupt(dev, (data >> KM_RD_DATA_0_SHIFT) & 0xff, 0);
+ if (data & KM_RD_VALID_1)
+ serio_interrupt(dev, (data >> KM_RD_DATA_1_SHIFT) & 0xff, 0);
+ if (data & KM_RD_VALID_2)
+ serio_interrupt(dev, (data >> KM_RD_DATA_2_SHIFT) & 0xff, 0);
+}
+
+static irqreturn_t ioc3kbd_intr(int itq, void *dev_id)
+{
+ struct ioc3kbd_data *d = dev_id;
+ u32 data_k, data_m;
+
+ data_k = readl(&d->regs->k_rd);
+ if (d->kbd_exists)
+ ioc3kbd_process_data(d->kbd, data_k);
+
+ data_m = readl(&d->regs->m_rd);
+ if (d->aux_exists)
+ ioc3kbd_process_data(d->aux, data_m);
+
+ return IRQ_HANDLED;
+}
+
+static int ioc3kbd_probe(struct platform_device *pdev)
+{
+ struct ioc3_serioregs __iomem *regs;
+ struct device *dev = &pdev->dev;
+ struct ioc3kbd_data *d;
+ struct serio *sk, *sa;
+ int irq, ret;
+
+ regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(regs))
+ return PTR_ERR(regs);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return -ENXIO;
+
+ d = devm_kzalloc(dev, sizeof(*d), GFP_KERNEL);
+ if (!d)
+ return -ENOMEM;
+
+ sk = kzalloc(sizeof(*sk), GFP_KERNEL);
+ if (!sk)
+ return -ENOMEM;
+
+ sa = kzalloc(sizeof(*sa), GFP_KERNEL);
+ if (!sa) {
+ kfree(sk);
+ return -ENOMEM;
+ }
+
+ sk->id.type = SERIO_8042;
+ sk->write = ioc3kbd_write;
+ sk->start = ioc3kbd_start;
+ sk->stop = ioc3kbd_stop;
+ snprintf(sk->name, sizeof(sk->name), "IOC3 keyboard %d", pdev->id);
+ snprintf(sk->phys, sizeof(sk->phys), "ioc3/serio%dkbd", pdev->id);
+ sk->port_data = d;
+ sk->dev.parent = dev;
+
+ sa->id.type = SERIO_8042;
+ sa->write = ioc3aux_write;
+ sa->start = ioc3aux_start;
+ sa->stop = ioc3aux_stop;
+ snprintf(sa->name, sizeof(sa->name), "IOC3 auxiliary %d", pdev->id);
+ snprintf(sa->phys, sizeof(sa->phys), "ioc3/serio%daux", pdev->id);
+ sa->port_data = d;
+ sa->dev.parent = dev;
+
+ d->regs = regs;
+ d->kbd = sk;
+ d->aux = sa;
+ d->irq = irq;
+
+ platform_set_drvdata(pdev, d);
+ serio_register_port(d->kbd);
+ serio_register_port(d->aux);
+
+ ret = request_irq(irq, ioc3kbd_intr, IRQF_SHARED, "ioc3-kbd", d);
+ if (ret) {
+ dev_err(dev, "could not request IRQ %d\n", irq);
+ serio_unregister_port(d->kbd);
+ serio_unregister_port(d->aux);
+ return ret;
+ }
+
+ /* enable ports */
+ writel(KM_CSR_K_CLAMP_3 | KM_CSR_M_CLAMP_3, ®s->km_csr);
+
+ return 0;
+}
+
+static int ioc3kbd_remove(struct platform_device *pdev)
+{
+ struct ioc3kbd_data *d = platform_get_drvdata(pdev);
+
+ free_irq(d->irq, d);
+ serio_unregister_port(d->kbd);
+ serio_unregister_port(d->aux);
+ return 0;
+}
+
+static struct platform_driver ioc3kbd_driver = {
+ .probe = ioc3kbd_probe,
+ .remove = ioc3kbd_remove,
+ .driver = {
+ .name = "ioc3-kbd",
+ },
+};
+module_platform_driver(ioc3kbd_driver);
+
+MODULE_AUTHOR("Thomas Bogendoerfer <[email protected]>");
+MODULE_DESCRIPTION("SGI IOC3 serio driver");
+MODULE_LICENSE("GPL");
--
2.24.1
On Wed, Jan 22, 2020 at 02:52:20PM +0100, Thomas Bogendoerfer wrote:
> This patch adds a platform driver for supporting keyboard and mouse
> interface of SGI IOC3 chips.
>
> Signed-off-by: Thomas Bogendoerfer <[email protected]>
Applied, thank you.
> ---
> Changes in v2:
> - track that serio is started before pushing data to it
>
> drivers/input/serio/Kconfig | 10 ++
> drivers/input/serio/Makefile | 1 +
> drivers/input/serio/ioc3kbd.c | 214 ++++++++++++++++++++++++++++++++++
> 3 files changed, 225 insertions(+)
> create mode 100644 drivers/input/serio/ioc3kbd.c
>
> diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
> index f3e18f8ef9ca..373a1646019e 100644
> --- a/drivers/input/serio/Kconfig
> +++ b/drivers/input/serio/Kconfig
> @@ -165,6 +165,16 @@ config SERIO_MACEPS2
> To compile this driver as a module, choose M here: the
> module will be called maceps2.
>
> +config SERIO_SGI_IOC3
> + tristate "SGI IOC3 PS/2 controller"
> + depends on SGI_MFD_IOC3
> + help
> + Say Y here if you have an SGI Onyx2, SGI Octane or IOC3 PCI card
> + and you want to attach and use a keyboard, mouse, or both.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called ioc3kbd.
> +
> config SERIO_LIBPS2
> tristate "PS/2 driver library"
> depends on SERIO_I8042 || SERIO_I8042=n
> diff --git a/drivers/input/serio/Makefile b/drivers/input/serio/Makefile
> index 67950a5ccb3f..6d97bad7b844 100644
> --- a/drivers/input/serio/Makefile
> +++ b/drivers/input/serio/Makefile
> @@ -20,6 +20,7 @@ obj-$(CONFIG_HIL_MLC) += hp_sdc_mlc.o hil_mlc.o
> obj-$(CONFIG_SERIO_PCIPS2) += pcips2.o
> obj-$(CONFIG_SERIO_PS2MULT) += ps2mult.o
> obj-$(CONFIG_SERIO_MACEPS2) += maceps2.o
> +obj-$(CONFIG_SERIO_SGI_IOC3) += ioc3kbd.o
> obj-$(CONFIG_SERIO_LIBPS2) += libps2.o
> obj-$(CONFIG_SERIO_RAW) += serio_raw.o
> obj-$(CONFIG_SERIO_AMS_DELTA) += ams_delta_serio.o
> diff --git a/drivers/input/serio/ioc3kbd.c b/drivers/input/serio/ioc3kbd.c
> new file mode 100644
> index 000000000000..3decbaff40cc
> --- /dev/null
> +++ b/drivers/input/serio/ioc3kbd.c
> @@ -0,0 +1,214 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * SGI IOC3 PS/2 controller driver for linux
> + *
> + * Copyright (C) 2019 Thomas Bogendoerfer <[email protected]>
> + *
> + * Based on code Copyright (C) 2005 Stanislaw Skowronek <[email protected]>
> + * Copyright (C) 2009 Johannes Dickgreber <[email protected]>
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/serio.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +
> +#include <asm/sn/ioc3.h>
> +
> +struct ioc3kbd_data {
> + struct ioc3_serioregs __iomem *regs;
> + struct serio *kbd, *aux;
> + bool kbd_exists, aux_exists;
> + int irq;
> +};
> +
> +static int ioc3kbd_wait(struct ioc3_serioregs __iomem *regs, u32 mask)
> +{
> + unsigned long timeout = 0;
> +
> + while ((readl(®s->km_csr) & mask) && (timeout < 250)) {
> + udelay(50);
> + timeout++;
> + }
> + return (timeout >= 250) ? -ETIMEDOUT : 0;
> +}
> +
> +static int ioc3kbd_write(struct serio *dev, u8 val)
> +{
> + struct ioc3kbd_data *d = dev->port_data;
> + int ret;
> +
> + ret = ioc3kbd_wait(d->regs, KM_CSR_K_WRT_PEND);
> + if (ret)
> + return ret;
> +
> + writel(val, &d->regs->k_wd);
> +
> + return 0;
> +}
> +
> +static int ioc3kbd_start(struct serio *dev)
> +{
> + struct ioc3kbd_data *d = dev->port_data;
> +
> + d->kbd_exists = true;
> + return 0;
> +}
> +
> +static void ioc3kbd_stop(struct serio *dev)
> +{
> + struct ioc3kbd_data *d = dev->port_data;
> +
> + d->kbd_exists = false;
> +}
> +
> +static int ioc3aux_write(struct serio *dev, u8 val)
> +{
> + struct ioc3kbd_data *d = dev->port_data;
> + int ret;
> +
> + ret = ioc3kbd_wait(d->regs, KM_CSR_M_WRT_PEND);
> + if (ret)
> + return ret;
> +
> + writel(val, &d->regs->m_wd);
> +
> + return 0;
> +}
> +
> +static int ioc3aux_start(struct serio *dev)
> +{
> + struct ioc3kbd_data *d = dev->port_data;
> +
> + d->aux_exists = true;
> + return 0;
> +}
> +
> +static void ioc3aux_stop(struct serio *dev)
> +{
> + struct ioc3kbd_data *d = dev->port_data;
> +
> + d->aux_exists = false;
> +}
> +
> +static void ioc3kbd_process_data(struct serio *dev, u32 data)
> +{
> + if (data & KM_RD_VALID_0)
> + serio_interrupt(dev, (data >> KM_RD_DATA_0_SHIFT) & 0xff, 0);
> + if (data & KM_RD_VALID_1)
> + serio_interrupt(dev, (data >> KM_RD_DATA_1_SHIFT) & 0xff, 0);
> + if (data & KM_RD_VALID_2)
> + serio_interrupt(dev, (data >> KM_RD_DATA_2_SHIFT) & 0xff, 0);
> +}
> +
> +static irqreturn_t ioc3kbd_intr(int itq, void *dev_id)
> +{
> + struct ioc3kbd_data *d = dev_id;
> + u32 data_k, data_m;
> +
> + data_k = readl(&d->regs->k_rd);
> + if (d->kbd_exists)
> + ioc3kbd_process_data(d->kbd, data_k);
> +
> + data_m = readl(&d->regs->m_rd);
> + if (d->aux_exists)
> + ioc3kbd_process_data(d->aux, data_m);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int ioc3kbd_probe(struct platform_device *pdev)
> +{
> + struct ioc3_serioregs __iomem *regs;
> + struct device *dev = &pdev->dev;
> + struct ioc3kbd_data *d;
> + struct serio *sk, *sa;
> + int irq, ret;
> +
> + regs = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(regs))
> + return PTR_ERR(regs);
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq < 0)
> + return -ENXIO;
> +
> + d = devm_kzalloc(dev, sizeof(*d), GFP_KERNEL);
> + if (!d)
> + return -ENOMEM;
> +
> + sk = kzalloc(sizeof(*sk), GFP_KERNEL);
> + if (!sk)
> + return -ENOMEM;
> +
> + sa = kzalloc(sizeof(*sa), GFP_KERNEL);
> + if (!sa) {
> + kfree(sk);
> + return -ENOMEM;
> + }
> +
> + sk->id.type = SERIO_8042;
> + sk->write = ioc3kbd_write;
> + sk->start = ioc3kbd_start;
> + sk->stop = ioc3kbd_stop;
> + snprintf(sk->name, sizeof(sk->name), "IOC3 keyboard %d", pdev->id);
> + snprintf(sk->phys, sizeof(sk->phys), "ioc3/serio%dkbd", pdev->id);
> + sk->port_data = d;
> + sk->dev.parent = dev;
> +
> + sa->id.type = SERIO_8042;
> + sa->write = ioc3aux_write;
> + sa->start = ioc3aux_start;
> + sa->stop = ioc3aux_stop;
> + snprintf(sa->name, sizeof(sa->name), "IOC3 auxiliary %d", pdev->id);
> + snprintf(sa->phys, sizeof(sa->phys), "ioc3/serio%daux", pdev->id);
> + sa->port_data = d;
> + sa->dev.parent = dev;
> +
> + d->regs = regs;
> + d->kbd = sk;
> + d->aux = sa;
> + d->irq = irq;
> +
> + platform_set_drvdata(pdev, d);
> + serio_register_port(d->kbd);
> + serio_register_port(d->aux);
> +
> + ret = request_irq(irq, ioc3kbd_intr, IRQF_SHARED, "ioc3-kbd", d);
> + if (ret) {
> + dev_err(dev, "could not request IRQ %d\n", irq);
> + serio_unregister_port(d->kbd);
> + serio_unregister_port(d->aux);
> + return ret;
> + }
> +
> + /* enable ports */
> + writel(KM_CSR_K_CLAMP_3 | KM_CSR_M_CLAMP_3, ®s->km_csr);
> +
> + return 0;
> +}
> +
> +static int ioc3kbd_remove(struct platform_device *pdev)
> +{
> + struct ioc3kbd_data *d = platform_get_drvdata(pdev);
> +
> + free_irq(d->irq, d);
> + serio_unregister_port(d->kbd);
> + serio_unregister_port(d->aux);
> + return 0;
> +}
> +
> +static struct platform_driver ioc3kbd_driver = {
> + .probe = ioc3kbd_probe,
> + .remove = ioc3kbd_remove,
> + .driver = {
> + .name = "ioc3-kbd",
> + },
> +};
> +module_platform_driver(ioc3kbd_driver);
> +
> +MODULE_AUTHOR("Thomas Bogendoerfer <[email protected]>");
> +MODULE_DESCRIPTION("SGI IOC3 serio driver");
> +MODULE_LICENSE("GPL");
> --
> 2.24.1
>
--
Dmitry