Current dts files with 'spi' nodes are manually verified.
In order to automate this process spi-rockchip.txt
has to be converted to yaml. In the new setup
spi-rockchip.yaml will inherit properties from
spi-controller.yaml.
Add document to MAINTAINERS.
Also rk3188.dtsi, rk3288.dtsi, rk3368.dtsi and rk3399.dtsi
use an extra fallback string, so change this in the documentation.
Changed:
"rockchip,rk3188-spi", "rockchip,rk3066-spi"
"rockchip,rk3288-spi", "rockchip,rk3066-spi"
"rockchip,rk3368-spi", "rockchip,rk3066-spi"
"rockchip,rk3399-spi", "rockchip,rk3066-spi"
Signed-off-by: Johan Jonker <[email protected]>
---
.../devicetree/bindings/spi/spi-rockchip.txt | 58 -----------
.../devicetree/bindings/spi/spi-rockchip.yaml | 111 +++++++++++++++++++++
MAINTAINERS | 1 +
3 files changed, 112 insertions(+), 58 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/spi/spi-rockchip.txt
create mode 100644 Documentation/devicetree/bindings/spi/spi-rockchip.yaml
diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
deleted file mode 100644
index a0edac12d..000000000
--- a/Documentation/devicetree/bindings/spi/spi-rockchip.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* Rockchip SPI Controller
-
-The Rockchip SPI controller is used to interface with various devices such as flash
-and display controllers using the SPI communication interface.
-
-Required Properties:
-
-- compatible: should be one of the following.
- "rockchip,rv1108-spi" for rv1108 SoCs.
- "rockchip,px30-spi", "rockchip,rk3066-spi" for px30 SoCs.
- "rockchip,rk3036-spi" for rk3036 SoCS.
- "rockchip,rk3066-spi" for rk3066 SoCs.
- "rockchip,rk3188-spi" for rk3188 SoCs.
- "rockchip,rk3228-spi" for rk3228 SoCS.
- "rockchip,rk3288-spi" for rk3288 SoCs.
- "rockchip,rk3368-spi" for rk3368 SoCs.
- "rockchip,rk3399-spi" for rk3399 SoCs.
-- reg: physical base address of the controller and length of memory mapped
- region.
-- interrupts: The interrupt number to the cpu. The interrupt specifier format
- depends on the interrupt controller.
-- clocks: Must contain an entry for each entry in clock-names.
-- clock-names: Shall be "spiclk" for the transfer-clock, and "apb_pclk" for
- the peripheral clock.
-- #address-cells: should be 1.
-- #size-cells: should be 0.
-
-Optional Properties:
-
-- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
- Documentation/devicetree/bindings/dma/dma.txt
-- dma-names: DMA request names should include "tx" and "rx" if present.
-- rx-sample-delay-ns: nanoseconds to delay after the SCLK edge before sampling
- Rx data (may need to be fine tuned for high capacitance lines).
- No delay (0) by default.
-- pinctrl-names: Names for the pin configuration(s); may be "default" or
- "sleep", where the "sleep" configuration may describe the state
- the pins should be in during system suspend. See also
- pinctrl/pinctrl-bindings.txt.
-
-
-Example:
-
- spi0: spi@ff110000 {
- compatible = "rockchip,rk3066-spi";
- reg = <0xff110000 0x1000>;
- dmas = <&pdma1 11>, <&pdma1 12>;
- dma-names = "tx", "rx";
- rx-sample-delay-ns = <10>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
- clock-names = "spiclk", "apb_pclk";
- pinctrl-0 = <&spi1_pins>;
- pinctrl-1 = <&spi1_sleep>;
- pinctrl-names = "default", "sleep";
- };
diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
new file mode 100644
index 000000000..80c56c583
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-rockchip.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SPI Controller
+
+description:
+ The Rockchip SPI controller is used to interface with various devices such
+ as flash and display controllers using the SPI communication interface.
+
+allOf:
+ - $ref: "spi-controller.yaml#"
+
+maintainers:
+ - Heiko Stuebner <[email protected]>
+
+# Everything else is described in the common file
+properties:
+ compatible:
+ oneOf:
+ - const: rockchip,rk3036-spi #for rk3036 SoCS.
+ - const: rockchip,rk3066-spi #for rk3066 SoCs.
+ - const: rockchip,rk3228-spi #for rk3228 SoCS.
+ - const: rockchip,rv1108-spi #for rv1108 SoCs.
+ - items:
+ - enum:
+ - rockchip,px30-spi #for px30 SoCs.
+ - rockchip,rk3188-spi #for rk3188 SoCs.
+ - rockchip,rk3288-spi #for rk3288 SoCs.
+ - rockchip,rk3368-spi #for rk3368 SoCs.
+ - rockchip,rk3399-spi #for rk3399 SoCs.
+ - const: rockchip,rk3066-spi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 2
+ maxItems: 2
+ description:
+ Must contain an entry for each entry in clock-names.
+
+ clock-names:
+ items:
+ - const: spiclk
+ - const: apb_pclk
+ description:
+ Shall be "spiclk" for the transfer-clock
+ and "apb_pclk" for the peripheral clock.
+
+ dmas:
+ items:
+ - description: TX DMA Channel
+ - description: RX DMA Channel
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+
+ rx-sample-delay-ns:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0
+ description:
+ Nano seconds to delay after the SCLK edge before sampling Rx data
+ (may need to be fine tuned for high capacitance lines).
+ If not specified 0 will be used.
+
+ pinctrl-names:
+ minItems: 1
+ items:
+ - const: default
+ - const: sleep
+ description:
+ Names for the pin configuration(s); may be "default" or "sleep",
+ where the "sleep" configuration may describe the state
+ the pins should be in during system suspend.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3188-cru-common.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi0: spi@ff110000 {
+ compatible = "rockchip,rk3066-spi";
+ reg = <0xff110000 0x1000>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+ clock-names = "spiclk", "apb_pclk";
+ dmas = <&pdma1 11>, <&pdma1 12>;
+ dma-names = "tx", "rx";
+ pinctrl-0 = <&spi1_pins>;
+ pinctrl-1 = <&spi1_sleep>;
+ pinctrl-names = "default", "sleep";
+ rx-sample-delay-ns = <10>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index d6ad01d71..096c324f9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2240,6 +2240,7 @@ L: [email protected]
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git
S: Maintained
F: Documentation/devicetree/bindings/i2c/i2c-rk3x.txt
+F: Documentation/devicetree/bindings/spi/spi-rockchip.yaml
F: arch/arm/boot/dts/rk3*
F: arch/arm/boot/dts/rv1108*
F: arch/arm/mach-rockchip/
--
2.11.0
The description below is already in use for rk3328.dtsi,
but was somehow never added to a document, so add
"rockchip,rk3328-spi", "rockchip,rk3066-spi"
for spi nodes on a rk3328 platform to spi-rockchip.yaml.
Signed-off-by: Johan Jonker <[email protected]>
---
Documentation/devicetree/bindings/spi/spi-rockchip.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
index 24d9567a6..27b2d1df9 100644
--- a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
@@ -30,6 +30,7 @@ properties:
- rockchip,rk3188-spi #for rk3188 SoCs.
- rockchip,rk3288-spi #for rk3288 SoCs.
- rockchip,rk3308-spi #for rk3308 SoCs.
+ - rockchip,rk3328-spi #for rk3328 SoCs.
- rockchip,rk3368-spi #for rk3368 SoCs.
- rockchip,rk3399-spi #for rk3399 SoCs.
- const: rockchip,rk3066-spi
--
2.11.0
The description below is already in use for rk3308.dtsi,
but was somehow never added to a document, so add
"rockchip,rk3308-spi", "rockchip,rk3066-spi"
for spi nodes on a rk3308 platform to spi-rockchip.yaml.
Signed-off-by: Johan Jonker <[email protected]>
---
Documentation/devicetree/bindings/spi/spi-rockchip.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
index 80c56c583..24d9567a6 100644
--- a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
@@ -29,6 +29,7 @@ properties:
- rockchip,px30-spi #for px30 SoCs.
- rockchip,rk3188-spi #for rk3188 SoCs.
- rockchip,rk3288-spi #for rk3288 SoCs.
+ - rockchip,rk3308-spi #for rk3308 SoCs.
- rockchip,rk3368-spi #for rk3368 SoCs.
- rockchip,rk3399-spi #for rk3399 SoCs.
- const: rockchip,rk3066-spi
--
2.11.0
On Sun, Jan 19, 2020 at 12:08:46AM +0100, Johan Jonker wrote:
> Current dts files with 'spi' nodes are manually verified.
> In order to automate this process spi-rockchip.txt
> has to be converted to yaml. In the new setup
> spi-rockchip.yaml will inherit properties from
> spi-controller.yaml.
>
> Add document to MAINTAINERS.
>
> Also rk3188.dtsi, rk3288.dtsi, rk3368.dtsi and rk3399.dtsi
> use an extra fallback string, so change this in the documentation.
>
> Changed:
> "rockchip,rk3188-spi", "rockchip,rk3066-spi"
> "rockchip,rk3288-spi", "rockchip,rk3066-spi"
> "rockchip,rk3368-spi", "rockchip,rk3066-spi"
> "rockchip,rk3399-spi", "rockchip,rk3066-spi"
>
> Signed-off-by: Johan Jonker <[email protected]>
> ---
> .../devicetree/bindings/spi/spi-rockchip.txt | 58 -----------
> .../devicetree/bindings/spi/spi-rockchip.yaml | 111 +++++++++++++++++++++
> MAINTAINERS | 1 +
> 3 files changed, 112 insertions(+), 58 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/spi/spi-rockchip.txt
> create mode 100644 Documentation/devicetree/bindings/spi/spi-rockchip.yaml
>
> diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
> deleted file mode 100644
> index a0edac12d..000000000
> --- a/Documentation/devicetree/bindings/spi/spi-rockchip.txt
> +++ /dev/null
> @@ -1,58 +0,0 @@
> -* Rockchip SPI Controller
> -
> -The Rockchip SPI controller is used to interface with various devices such as flash
> -and display controllers using the SPI communication interface.
> -
> -Required Properties:
> -
> -- compatible: should be one of the following.
> - "rockchip,rv1108-spi" for rv1108 SoCs.
> - "rockchip,px30-spi", "rockchip,rk3066-spi" for px30 SoCs.
> - "rockchip,rk3036-spi" for rk3036 SoCS.
> - "rockchip,rk3066-spi" for rk3066 SoCs.
> - "rockchip,rk3188-spi" for rk3188 SoCs.
> - "rockchip,rk3228-spi" for rk3228 SoCS.
> - "rockchip,rk3288-spi" for rk3288 SoCs.
> - "rockchip,rk3368-spi" for rk3368 SoCs.
> - "rockchip,rk3399-spi" for rk3399 SoCs.
> -- reg: physical base address of the controller and length of memory mapped
> - region.
> -- interrupts: The interrupt number to the cpu. The interrupt specifier format
> - depends on the interrupt controller.
> -- clocks: Must contain an entry for each entry in clock-names.
> -- clock-names: Shall be "spiclk" for the transfer-clock, and "apb_pclk" for
> - the peripheral clock.
> -- #address-cells: should be 1.
> -- #size-cells: should be 0.
> -
> -Optional Properties:
> -
> -- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
> - Documentation/devicetree/bindings/dma/dma.txt
> -- dma-names: DMA request names should include "tx" and "rx" if present.
> -- rx-sample-delay-ns: nanoseconds to delay after the SCLK edge before sampling
> - Rx data (may need to be fine tuned for high capacitance lines).
> - No delay (0) by default.
> -- pinctrl-names: Names for the pin configuration(s); may be "default" or
> - "sleep", where the "sleep" configuration may describe the state
> - the pins should be in during system suspend. See also
> - pinctrl/pinctrl-bindings.txt.
> -
> -
> -Example:
> -
> - spi0: spi@ff110000 {
> - compatible = "rockchip,rk3066-spi";
> - reg = <0xff110000 0x1000>;
> - dmas = <&pdma1 11>, <&pdma1 12>;
> - dma-names = "tx", "rx";
> - rx-sample-delay-ns = <10>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
> - clock-names = "spiclk", "apb_pclk";
> - pinctrl-0 = <&spi1_pins>;
> - pinctrl-1 = <&spi1_sleep>;
> - pinctrl-names = "default", "sleep";
> - };
> diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
> new file mode 100644
> index 000000000..80c56c583
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
> @@ -0,0 +1,111 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/spi/spi-rockchip.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Rockchip SPI Controller
> +
> +description:
> + The Rockchip SPI controller is used to interface with various devices such
> + as flash and display controllers using the SPI communication interface.
> +
> +allOf:
> + - $ref: "spi-controller.yaml#"
> +
> +maintainers:
> + - Heiko Stuebner <[email protected]>
> +
> +# Everything else is described in the common file
> +properties:
> + compatible:
> + oneOf:
> + - const: rockchip,rk3036-spi #for rk3036 SoCS.
> + - const: rockchip,rk3066-spi #for rk3066 SoCs.
> + - const: rockchip,rk3228-spi #for rk3228 SoCS.
> + - const: rockchip,rv1108-spi #for rv1108 SoCs.
> + - items:
> + - enum:
> + - rockchip,px30-spi #for px30 SoCs.
> + - rockchip,rk3188-spi #for rk3188 SoCs.
> + - rockchip,rk3288-spi #for rk3288 SoCs.
> + - rockchip,rk3368-spi #for rk3368 SoCs.
> + - rockchip,rk3399-spi #for rk3399 SoCs.
> + - const: rockchip,rk3066-spi
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + minItems: 2
> + maxItems: 2
> + description:
> + Must contain an entry for each entry in clock-names.
That's *every* clocks entry. Drop this.
> +
> + clock-names:
> + items:
> + - const: spiclk
> + - const: apb_pclk
> + description:
> + Shall be "spiclk" for the transfer-clock
> + and "apb_pclk" for the peripheral clock.
Basically just repeating what the schema says. If you want more of a
description of each clock, do what you've done for 'dmas' with 'clocks'.
> +
> + dmas:
> + items:
> + - description: TX DMA Channel
> + - description: RX DMA Channel
> +
> + dma-names:
> + items:
> + - const: tx
> + - const: rx
> +
> + rx-sample-delay-ns:
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
Don't need to define the type for properties with standard unit
suffixes.
> + default: 0
> + description:
> + Nano seconds to delay after the SCLK edge before sampling Rx data
> + (may need to be fine tuned for high capacitance lines).
> + If not specified 0 will be used.
> +
> + pinctrl-names:
> + minItems: 1
> + items:
> + - const: default
> + - const: sleep
> + description:
> + Names for the pin configuration(s); may be "default" or "sleep",
> + where the "sleep" configuration may describe the state
> + the pins should be in during system suspend.
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/rk3188-cru-common.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + spi0: spi@ff110000 {
> + compatible = "rockchip,rk3066-spi";
> + reg = <0xff110000 0x1000>;
> + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
> + clock-names = "spiclk", "apb_pclk";
> + dmas = <&pdma1 11>, <&pdma1 12>;
> + dma-names = "tx", "rx";
> + pinctrl-0 = <&spi1_pins>;
> + pinctrl-1 = <&spi1_sleep>;
> + pinctrl-names = "default", "sleep";
> + rx-sample-delay-ns = <10>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index d6ad01d71..096c324f9 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2240,6 +2240,7 @@ L: [email protected]
> T: git git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git
> S: Maintained
> F: Documentation/devicetree/bindings/i2c/i2c-rk3x.txt
> +F: Documentation/devicetree/bindings/spi/spi-rockchip.yaml
> F: arch/arm/boot/dts/rk3*
> F: arch/arm/boot/dts/rv1108*
> F: arch/arm/mach-rockchip/
> --
> 2.11.0
>
On Sun, 19 Jan 2020 00:08:47 +0100, Johan Jonker wrote:
> The description below is already in use for rk3308.dtsi,
> but was somehow never added to a document, so add
> "rockchip,rk3308-spi", "rockchip,rk3066-spi"
> for spi nodes on a rk3308 platform to spi-rockchip.yaml.
>
> Signed-off-by: Johan Jonker <[email protected]>
> ---
> Documentation/devicetree/bindings/spi/spi-rockchip.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
Acked-by: Rob Herring <[email protected]>
On Sun, 19 Jan 2020 00:08:48 +0100, Johan Jonker wrote:
> The description below is already in use for rk3328.dtsi,
> but was somehow never added to a document, so add
> "rockchip,rk3328-spi", "rockchip,rk3066-spi"
> for spi nodes on a rk3328 platform to spi-rockchip.yaml.
>
> Signed-off-by: Johan Jonker <[email protected]>
> ---
> Documentation/devicetree/bindings/spi/spi-rockchip.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
Acked-by: Rob Herring <[email protected]>