From: Jack Wang <[email protected]>
README with description of major sysfs entries, sysfs documentation
has been moved to ABI dir as suggested by Bart.
Signed-off-by: Danil Kipnis <[email protected]>
Signed-off-by: Jack Wang <[email protected]>
Cc: [email protected]
---
.../ABI/testing/sysfs-class-rtrs-client | 131 +++++++++++
.../ABI/testing/sysfs-class-rtrs-server | 53 +++++
drivers/infiniband/ulp/rtrs/README | 213 ++++++++++++++++++
3 files changed, 397 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-class-rtrs-client
create mode 100644 Documentation/ABI/testing/sysfs-class-rtrs-server
create mode 100644 drivers/infiniband/ulp/rtrs/README
diff --git a/Documentation/ABI/testing/sysfs-class-rtrs-client b/Documentation/ABI/testing/sysfs-class-rtrs-client
new file mode 100644
index 000000000000..21bca723465b
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-rtrs-client
@@ -0,0 +1,131 @@
+What: /sys/class/rtrs-client
+Date: Jan 2020
+KernelVersion: 5.6
+Contact: Jack Wang <[email protected]> Danil Kipnis <[email protected]>
+Description: When a user of RTRS API creates a new session, a directory entry with
+ the name of that session is created under /sys/class/rtrs-client/<session-name>/
+
+What: /sys/class/rtrs-client/<session-name>/add_path
+Date: Jan 2020
+KernelVersion: 5.6
+Contact: Jack Wang <[email protected]> Danil Kipnis <[email protected]>
+Description: RW, adds a new path (connection) to an existing session. Expected format is the
+ following:
+
+ <[source addr,]destination addr>
+ *addr ::= [ ip:<ipv4|ipv6> | gid:<gid> ]
+
+What: /sys/class/rtrs-client/<session-name>/max_reconnect_attempts
+Date: Jan 2020
+KernelVersion: 5.6
+Contact: Jack Wang <[email protected]> Danil Kipnis <[email protected]>
+Description: Maximum number reconnect attempts the client should make before giving up
+ after connection breaks unexpectedly.
+
+What: /sys/class/rtrs-client/<session-name>/mp_policy
+Date: Jan 2020
+KernelVersion: 5.6
+Contact: Jack Wang <[email protected]> Danil Kipnis <[email protected]>
+Description: Multipath policy specifies which path should be selected on each IO:
+
+ round-robin (0):
+ select path in per CPU round-robin manner.
+
+ min-inflight (1):
+ select path with minimum inflights.
+
+What: /sys/class/rtrs-client/<session-name>/paths/
+Date: Jan 2020
+KernelVersion: 5.6
+Contact: Jack Wang <[email protected]> Danil Kipnis <[email protected]>
+Description: Each path belonging to a given session is listed here by its source and
+ destination address. When a new path is added to a session by writing to
+ the "add_path" entry, a directory <src@dst> is created.
+
+What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/state
+Date: Jan 2020
+KernelVersion: 5.6
+Contact: Jack Wang <[email protected]> Danil Kipnis <[email protected]>
+Description: RO, Contains "connected" if the session is connected to the peer and fully
+ functional. Otherwise the file contains "disconnected"
+
+What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/reconnect
+Date: Jan 2020
+KernelVersion: 5.6
+Contact: Jack Wang <[email protected]> Danil Kipnis <[email protected]>
+Description: Write "1" to the file in order to reconnect the path.
+ Operation is blocking and returns 0 if reconnect was successful.
+
+What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/disconnect
+Date: Jan 2020
+KernelVersion: 5.6
+Contact: Jack Wang <[email protected]> Danil Kipnis <[email protected]>
+Description: Write "1" to the file in order to disconnect the path.
+ Operation blocks until RTRS path is disconnected.
+
+What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/remove_path
+Date: Jan 2020
+KernelVersion: 5.6
+Contact: Jack Wang <[email protected]> Danil Kipnis <[email protected]>
+Description: Write "1" to the file in order to disconnected and remove the path
+ from the session. Operation blocks until the path is disconnected
+ and removed from the session.
+
+What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/hca_name
+Date: Jan 2020
+KernelVersion: 5.6
+Contact: Jack Wang <[email protected]> Danil Kipnis <[email protected]>
+Description: RO, Contains the the name of HCA the connection established on.
+
+What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/hca_port
+Date: Jan 2020
+KernelVersion: 5.6
+Contact: Jack Wang <[email protected]> Danil Kipnis <[email protected]>
+Description: RO, Contains the port number of active port traffic is going through.
+
+What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/src_addr
+Date: Jan 2020
+KernelVersion: 5.6
+Contact: Jack Wang <[email protected]> Danil Kipnis <[email protected]>
+Description: RO, Contains the source address of the path
+
+What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/dst_addr
+Date: Jan 2020
+KernelVersion: 5.6
+Contact: Jack Wang <[email protected]> Danil Kipnis <[email protected]>
+Description: RO, Contains the destination address of the path
+
+What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/stats/reset_all
+Date: Jan 2020
+KernelVersion: 5.6
+Contact: Jack Wang <[email protected]> Danil Kipnis <[email protected]>
+Description: RW, Read will return usage help, write 0 will clear all the statistics.
+
+What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/stats/cpu_migration
+Date: Jan 2020
+KernelVersion: 5.6
+Contact: Jack Wang <[email protected]> Danil Kipnis <[email protected]>
+Description: RTRS expects that each HCA IRQ is pinned to a separate CPU. If it's
+ not the case, the processing of an I/O response could be processed on a
+ different CPU than where it was originally submitted. This file shows
+ how many interrupts where generated on a non expected CPU.
+ "from:" is the CPU on which the IRQ was expected, but not generated.
+ "to:" is the CPU on which the IRQ was generated, but not expected.
+
+What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/stats/reconnects
+Date: Jan 2020
+KernelVersion: 5.6
+Contact: Jack Wang <[email protected]> Danil Kipnis <[email protected]>
+Description: Contains 2 unsigned int values, the first one records number of successful
+ reconnects in the path lifetime, the second one records number of failed
+ reconnects in the path lifetime.
+
+What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/stats/rdma
+Date: Jan 2020
+KernelVersion: 5.6
+Contact: Jack Wang <[email protected]> Danil Kipnis <[email protected]>
+Description: Contains statistics regarding rdma operations and inflight operations.
+ The output consists of 6 values:
+
+ <read-count> <read-total-size> <write-count> <write-total-size> \
+ <inflights> <failovered>
diff --git a/Documentation/ABI/testing/sysfs-class-rtrs-server b/Documentation/ABI/testing/sysfs-class-rtrs-server
new file mode 100644
index 000000000000..b7e2d0ced055
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-rtrs-server
@@ -0,0 +1,53 @@
+What: /sys/class/rtrs-server
+Date: Jan 2020
+KernelVersion: 5.6
+Contact: Jack Wang <[email protected]> Danil Kipnis <[email protected]>
+Description: When a user of RTRS API creates a new session on a client side, a
+ directory entry with the name of that session is created in here.
+
+What: /sys/class/rtrs-server/<session-name>/paths/
+Date: Jan 2020
+KernelVersion: 5.6
+Contact: Jack Wang <[email protected]> Danil Kipnis <[email protected]>
+Description: When new path is created by writing to "add_path" entry on client side,
+ a directory entry named as <source address>@<destination address> is created
+ on server.
+
+What: /sys/class/rtrs-server/<session-name>/paths/<src@dst>/disconnect
+Date: Jan 2020
+KernelVersion: 5.6
+Contact: Jack Wang <[email protected]> Danil Kipnis <[email protected]>
+Description: When "1" is written to the file, the RTRS session is being disconnected.
+ Operations is non-blocking and returns control immediately to the caller.
+
+What: /sys/class/rtrs-server/<session-name>/paths/<src@dst>/hca_name
+Date: Jan 2020
+KernelVersion: 5.6
+Contact: Jack Wang <[email protected]> Danil Kipnis <[email protected]>
+Description: RO, Contains the the name of HCA the connection established on.
+
+What: /sys/class/rtrs-server/<session-name>/paths/<src@dst>/hca_port
+Date: Jan 2020
+KernelVersion: 5.6
+Contact: Jack Wang <[email protected]> Danil Kipnis <[email protected]>
+Description: RO, Contains the port number of active port traffic is going through.
+
+What: /sys/class/rtrs-server/<session-name>/paths/<src@dst>/src_addr
+Date: Jan 2020
+KernelVersion: 5.6
+Contact: Jack Wang <[email protected]> Danil Kipnis <[email protected]>
+Description: RO, Contains the source address of the path
+
+What: /sys/class/rtrs-server/<session-name>/paths/<src@dst>/dst_addr
+Date: Jan 2020
+KernelVersion: 5.6
+Contact: Jack Wang <[email protected]> Danil Kipnis <[email protected]>
+Description: RO, Contains the destination address of the path
+
+What: /sys/class/rtrs-server/<session-name>/paths/<src@dst>/stats/rdma
+Date: Jan 2020
+KernelVersion: 5.6
+Contact: Jack Wang <[email protected]> Danil Kipnis <[email protected]>
+Description: Contains statistics regarding rdma operations and inflight operations.
+ The output consists of 5 values:
+ <read-count> <read-total-size> <write-count> <write-total-size> <inflights>
diff --git a/drivers/infiniband/ulp/rtrs/README b/drivers/infiniband/ulp/rtrs/README
new file mode 100644
index 000000000000..5d9ea142e5dd
--- /dev/null
+++ b/drivers/infiniband/ulp/rtrs/README
@@ -0,0 +1,213 @@
+****************************
+RDMA Transport (RTRS)
+****************************
+
+RTRS (RDMA Transport) is a reliable high speed transport library
+which provides support to establish optimal number of connections
+between client and server machines using RDMA (InfiniBand, RoCE, iWarp)
+transport. It is optimized to transfer (read/write) IO blocks.
+
+In its core interface it follows the BIO semantics of providing the
+possibility to either write data from an sg list to the remote side
+or to request ("read") data transfer from the remote side into a given
+sg list.
+
+RTRS provides I/O fail-over and load-balancing capabilities by using
+multipath I/O (see "add_path" and "mp_policy" configuration entries in
+Documentation/ABI/testing/sysfs-class-rtrs-client).
+
+RTRS is used by the RNBD (RDMA Network Block Device) modules.
+
+==================
+Transport protocol
+==================
+
+Overview
+--------
+An established connection between a client and a server is called rtrs
+session. A session is associated with a set of memory chunks reserved on the
+server side for a given client for rdma transfer. A session
+consists of multiple paths, each representing a separate physical link
+between client and server. Those are used for load balancing and failover.
+Each path consists of as many connections (QPs) as there are cpus on
+the client.
+
+When processing an incoming write or read request, rtrs client uses memory
+chunks reserved for him on the server side. Their number, size and addresses
+need to be exchanged between client and server during the connection
+establishment phase. Apart from the memory related information client needs to
+inform the server about the session name and identify each path and connection
+individually.
+
+On an established session client sends to server write or read messages.
+Server uses immediate field to tell the client which request is being
+acknowledged and for errno. Client uses immediate field to tell the server
+which of the memory chunks has been accessed and at which offset the message
+can be found.
+
+Module parameter always_invalidate is introduced for the security problem
+discussed in LPC RDMA MC 2019. When always_invalidate=Y, on the server side we
+invalidate each rdma buffer before we hand it over to RNBD server and
+then pass it to the block layer. A new rkey is generated and registered for the
+buffer after it returns back from the block layer and RNBD server.
+The new rkey is sent back to the client along with the IO result.
+The procedure is the default behaviour of the driver. This invalidation and
+registration on each IO causes performance drop of up to 20%. A user of the
+driver may choose to load the modules with this mechanism switched off
+(always_invalidate=N), if he understands and can take the risk of a malicious
+client being able to corrupt memory of a server it is connected to. This might
+be a reasonable option in a scenario where all the clients and all the servers
+are located within a secure datacenter.
+
+
+Connection establishment
+------------------------
+
+1. Client starts establishing connections belonging to a path of a session one
+by one via attaching RTRS_MSG_CON_REQ messages to the rdma_connect requests.
+Those include uuid of the session and uuid of the path to be
+established. They are used by the server to find a persisting session/path or
+to create a new one when necessary. The message also contains the protocol
+version and magic for compatibility, total number of connections per session
+(as many as cpus on the client), the id of the current connection and
+the reconnect counter, which is used to resolve the situations where
+client is trying to reconnect a path, while server is still destroying the old
+one.
+
+2. Server accepts the connection requests one by one and attaches
+RTRS_MSG_CONN_RSP messages to the rdma_accept. Apart from magic and
+protocol version, the messages include error code, queue depth supported by
+the server (number of memory chunks which are going to be allocated for that
+session) and the maximum size of one io, RTRS_MSG_NEW_RKEY_F flags is set
+when always_invalidate=Y.
+
+3. After all connections of a path are established client sends to server the
+RTRS_MSG_INFO_REQ message, containing the name of the session. This message
+requests the address information from the server.
+
+4. Server replies to the session info request message with RTRS_MSG_INFO_RSP,
+which contains the addresses and keys of the RDMA buffers allocated for that
+session.
+
+5. Session becomes connected after all paths to be established are connected
+(i.e. steps 1-4 finished for all paths requested for a session)
+
+6. Server and client exchange periodically heartbeat messages (empty rdma
+messages with an immediate field) which are used to detect a crash on remote
+side or network outage in an absence of IO.
+
+7. On any RDMA related error or in the case of a heartbeat timeout, the
+corresponding path is disconnected, all the inflight IO are failed over to a
+healthy path, if any, and the reconnect mechanism is triggered.
+
+CLT SRV
+*for each connection belonging to a path and for each path:
+RTRS_MSG_CON_REQ ------------------->
+ <------------------- RTRS_MSG_CON_RSP
+...
+*after all connections are established:
+RTRS_MSG_INFO_REQ ------------------->
+ <------------------- RTRS_MSG_INFO_RSP
+*heartbeat is started from both sides:
+ -------------------> [RTRS_HB_MSG_IMM]
+[RTRS_HB_MSG_ACK] <-------------------
+[RTRS_HB_MSG_IMM] <-------------------
+ -------------------> [RTRS_HB_MSG_ACK]
+
+IO path
+-------
+
+* Write (always_invalidate=N) *
+
+1. When processing a write request client selects one of the memory chunks
+on the server side and rdma writes there the user data, user header and the
+RTRS_MSG_RDMA_WRITE message. Apart from the type (write), the message only
+contains size of the user header. The client tells the server which chunk has
+been accessed and at what offset the RTRS_MSG_RDMA_WRITE can be found by
+using the IMM field.
+
+2. When confirming a write request server sends an "empty" rdma message with
+an immediate field. The 32 bit field is used to specify the outstanding
+inflight IO and for the error code.
+
+CLT SRV
+usr_data + usr_hdr + rtrs_msg_rdma_write -----------------> [RTRS_IO_REQ_IMM]
+[RTRS_IO_RSP_IMM] <----------------- (id + errno)
+
+* Write (always_invalidate=Y) *
+
+1. When processing a write request client selects one of the memory chunks
+on the server side and rdma writes there the user data, user header and the
+RTRS_MSG_RDMA_WRITE message. Apart from the type (write), the message only
+contains size of the user header. The client tells the server which chunk has
+been accessed and at what offset the RTRS_MSG_RDMA_WRITE can be found by
+using the IMM field, Server invalidate rkey associated to the memory chunks
+first, when it finishes, pass the IO to RNBD server module.
+
+2. When confirming a write request server sends an "empty" rdma message with
+an immediate field. The 32 bit field is used to specify the outstanding
+inflight IO and for the error code. The new rkey is sent back using
+SEND_WITH_IMM WR, client When it recived new rkey message, it validates
+the message and finished IO after update rkey for the rbuffer, then post
+back the recv buffer for later use.
+
+CLT SRV
+usr_data + usr_hdr + rtrs_msg_rdma_write -----------------> [RTRS_IO_REQ_IMM]
+[RTRS_MSG_RKEY_RSP] <----------------- (RTRS_MSG_RKEY_RSP)
+[RTRS_IO_RSP_IMM] <----------------- (id + errno)
+
+
+* Read (always_invalidate=N)*
+
+1. When processing a read request client selects one of the memory chunks
+on the server side and rdma writes there the user header and the
+RTRS_MSG_RDMA_READ message. This message contains the type (read), size of
+the user header, flags (specifying if memory invalidation is necessary) and the
+list of addresses along with keys for the data to be read into.
+
+2. When confirming a read request server transfers the requested data first,
+attaches an invalidation message if requested and finally an "empty" rdma
+message with an immediate field. The 32 bit field is used to specify the
+outstanding inflight IO and the error code.
+
+CLT SRV
+usr_hdr + rtrs_msg_rdma_read --------------> [RTRS_IO_REQ_IMM]
+[RTRS_IO_RSP_IMM] <-------------- usr_data + (id + errno)
+or in case client requested invalidation:
+[RTRS_IO_RSP_IMM_W_INV] <-------------- usr_data + (INV) + (id + errno)
+
+* Read (always_invalidate=Y)*
+
+1. When processing a read request client selects one of the memory chunks
+on the server side and rdma writes there the user header and the
+RTRS_MSG_RDMA_READ message. This message contains the type (read), size of
+the user header, flags (specifying if memory invalidation is necessary) and the
+list of addresses along with keys for the data to be read into.
+Server invalidate rkey associated to the memory chunks first, when it finishes,
+passes the IO to RNBD server module.
+
+2. When confirming a read request server transfers the requested data first,
+attaches an invalidation message if requested and finally an "empty" rdma
+message with an immediate field. The 32 bit field is used to specify the
+outstanding inflight IO and the error code. The new rkey is sent back using
+SEND_WITH_IMM WR, client When it recived new rkey message, it validates
+the message and finished IO after update rkey for the rbuffer, then post
+back the recv buffer for later use.
+
+CLT SRV
+usr_hdr + rtrs_msg_rdma_read --------------> [RTRS_IO_REQ_IMM]
+[RTRS_IO_RSP_IMM] <-------------- usr_data + (id + errno)
+[RTRS_MSG_RKEY_RSP] <----------------- (RTRS_MSG_RKEY_RSP)
+or in case client requested invalidation:
+[RTRS_IO_RSP_IMM_W_INV] <-------------- usr_data + (INV) + (id + errno)
+=========================================
+Contributors List(in alphabetical order)
+=========================================
+Danil Kipnis <[email protected]>
+Fabian Holler <[email protected]>
+Guoqing Jiang <[email protected]>
+Jack Wang <[email protected]>
+Kleber Souza <[email protected]>
+Lutz Pogrell <[email protected]>
+Milind Dumbare <[email protected]>
+Roman Penyaev <[email protected]>
--
2.17.1