Convert the binding file i2c-cros-ec-tunnel.txt to yaml format.
This was tested and verified on ARM and ARM64 with:
make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.yaml
make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.yaml
Signed-off-by: Dafna Hirschfeld <[email protected]>
---
.../bindings/i2c/i2c-cros-ec-tunnel.txt | 39 ------------
.../bindings/i2c/i2c-cros-ec-tunnel.yaml | 61 +++++++++++++++++++
2 files changed, 61 insertions(+), 39 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.yaml
diff --git a/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt b/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt
deleted file mode 100644
index 898f030eba62..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-I2C bus that tunnels through the ChromeOS EC (cros-ec)
-======================================================
-On some ChromeOS board designs we've got a connection to the EC (embedded
-controller) but no direct connection to some devices on the other side of
-the EC (like a battery and PMIC). To get access to those devices we need
-to tunnel our i2c commands through the EC.
-
-The node for this device should be under a cros-ec node like google,cros-ec-spi
-or google,cros-ec-i2c.
-
-
-Required properties:
-- compatible: google,cros-ec-i2c-tunnel
-- google,remote-bus: The EC bus we'd like to talk to.
-
-Optional child nodes:
-- One node per I2C device connected to the tunnelled I2C bus.
-
-
-Example:
- cros-ec@0 {
- compatible = "google,cros-ec-spi";
-
- ...
-
- i2c-tunnel {
- compatible = "google,cros-ec-i2c-tunnel";
- #address-cells = <1>;
- #size-cells = <0>;
-
- google,remote-bus = <0>;
-
- battery: sbs-battery@b {
- compatible = "sbs,sbs-battery";
- reg = <0xb>;
- sbs,poll-retry-count = <1>;
- };
- };
- }
diff --git a/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.yaml b/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.yaml
new file mode 100644
index 000000000000..c1383e607f47
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-cros-ec-tunnel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C bus that tunnels through the ChromeOS EC (cros-ec)
+
+maintainers:
+ - Benson Leung <[email protected]>
+ - Enric Balletbo i Serra <[email protected]>
+ - Guenter Roeck <[email protected]>
+
+description: |
+ On some ChromeOS board designs we've got a connection to the EC (embedded
+ controller) but no direct connection to some devices on the other side of
+ the EC (like a battery and PMIC). To get access to those devices we need
+ to tunnel our i2c commands through the EC.
+ The node for this device should be under a cros-ec node like google,cros-ec-spi
+ or google,cros-ec-i2c.
+
+properties:
+ compatible:
+ const:
+ google,cros-ec-i2c-tunnel
+
+ google,remote-bus:
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ description: The EC bus we'd like to talk to.
+
+ "#address-cells": true
+ "#size-cells": true
+
+patternProperties:
+ "^.*@[0-9a-f]+$":
+ type: object
+ description: One node per I2C device connected to the tunnelled I2C bus.
+
+additionalProperties: false
+
+required:
+ - compatible
+ - google,remote-bus
+
+examples:
+ - |
+ cros-ec@0 {
+ compatible = "google,cros-ec-spi";
+ i2c-tunnel {
+ compatible = "google,cros-ec-i2c-tunnel";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ google,remote-bus = <0>;
+
+ battery: sbs-battery@b {
+ compatible = "sbs,sbs-battery";
+ reg = <0xb>;
+ sbs,poll-retry-count = <1>;
+ };
+ };
+ };
--
2.17.1
On Mon, Jan 27, 2020 at 05:12:13PM +0100, Dafna Hirschfeld wrote:
> Convert the binding file i2c-cros-ec-tunnel.txt to yaml format.
>
> This was tested and verified on ARM and ARM64 with:
>
> make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.yaml
> make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.yaml
>
> Signed-off-by: Dafna Hirschfeld <[email protected]>
> ---
> .../bindings/i2c/i2c-cros-ec-tunnel.txt | 39 ------------
> .../bindings/i2c/i2c-cros-ec-tunnel.yaml | 61 +++++++++++++++++++
> 2 files changed, 61 insertions(+), 39 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt
> create mode 100644 Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.yaml
>
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt b/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt
> deleted file mode 100644
> index 898f030eba62..000000000000
> --- a/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt
> +++ /dev/null
> @@ -1,39 +0,0 @@
> -I2C bus that tunnels through the ChromeOS EC (cros-ec)
> -======================================================
> -On some ChromeOS board designs we've got a connection to the EC (embedded
> -controller) but no direct connection to some devices on the other side of
> -the EC (like a battery and PMIC). To get access to those devices we need
> -to tunnel our i2c commands through the EC.
> -
> -The node for this device should be under a cros-ec node like google,cros-ec-spi
> -or google,cros-ec-i2c.
> -
> -
> -Required properties:
> -- compatible: google,cros-ec-i2c-tunnel
> -- google,remote-bus: The EC bus we'd like to talk to.
> -
> -Optional child nodes:
> -- One node per I2C device connected to the tunnelled I2C bus.
> -
> -
> -Example:
> - cros-ec@0 {
> - compatible = "google,cros-ec-spi";
> -
> - ...
> -
> - i2c-tunnel {
> - compatible = "google,cros-ec-i2c-tunnel";
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - google,remote-bus = <0>;
> -
> - battery: sbs-battery@b {
> - compatible = "sbs,sbs-battery";
> - reg = <0xb>;
> - sbs,poll-retry-count = <1>;
> - };
> - };
> - }
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.yaml b/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.yaml
> new file mode 100644
> index 000000000000..c1383e607f47
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.yaml
> @@ -0,0 +1,61 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/i2c/i2c-cros-ec-tunnel.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: I2C bus that tunnels through the ChromeOS EC (cros-ec)
> +
> +maintainers:
> + - Benson Leung <[email protected]>
> + - Enric Balletbo i Serra <[email protected]>
> + - Guenter Roeck <[email protected]>
> +
> +description: |
> + On some ChromeOS board designs we've got a connection to the EC (embedded
> + controller) but no direct connection to some devices on the other side of
> + the EC (like a battery and PMIC). To get access to those devices we need
> + to tunnel our i2c commands through the EC.
> + The node for this device should be under a cros-ec node like google,cros-ec-spi
> + or google,cros-ec-i2c.
You should have a ref to /schemas/i2c-controller.yaml here.
> +
> +properties:
> + compatible:
> + const:
> + google,cros-ec-i2c-tunnel
> +
> + google,remote-bus:
> + $ref: "/schemas/types.yaml#/definitions/uint32"
> + description: The EC bus we'd like to talk to.
> +
> + "#address-cells": true
> + "#size-cells": true
> +
> +patternProperties:
> + "^.*@[0-9a-f]+$":
> + type: object
> + description: One node per I2C device connected to the tunnelled I2C bus.
> +
> +additionalProperties: false
> +
> +required:
> + - compatible
> + - google,remote-bus
> +
> +examples:
> + - |
> + cros-ec@0 {
> + compatible = "google,cros-ec-spi";
> + i2c-tunnel {
> + compatible = "google,cros-ec-i2c-tunnel";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + google,remote-bus = <0>;
> +
> + battery: sbs-battery@b {
> + compatible = "sbs,sbs-battery";
> + reg = <0xb>;
> + sbs,poll-retry-count = <1>;
> + };
> + };
> + };
> --
> 2.17.1
>