2020-01-27 12:36:40

by JieunKim

Subject: [PATCH] iio: imu: st_lsm6dsx: Fix mismatched comments

odr to odr_table
gain to fs_table

'gain' is actually in 'st_lsm6dsx_fs' structure of 'fs_table'

Signed-off-by: JieunKim <[email protected]>
---
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index 9c3486a8134f..f2113a63721a 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -230,8 +230,8 @@ enum st_lsm6dsx_ext_sensor_id {
* @i2c_addr: I2c slave address list.
* @wai: Wai address info.
* @id: external sensor id.
- * @odr: Output data rate of the sensor [Hz].
- * @gain: Configured sensor sensitivity.
+ * @odr_table: Output data rate of the sensor [Hz].
+ * @fs_table: Configured sensor sensitivity table depending on full scale.
* @temp_comp: Temperature compensation register info (addr + mask).
* @pwr_table: Power on register info (addr + mask).
* @off_canc: Offset cancellation register info (addr + mask).
--
2.17.1

2020-02-02 11:09:55

by Jonathan Cameron

Subject: Re: [PATCH] iio: imu: st_lsm6dsx: Fix mismatched comments

On Mon, 27 Jan 2020 21:03:59 +0900
JieunKim <[email protected]> wrote:

> odr to odr_table
> gain to fs_table
>
> 'gain' is actually in 'st_lsm6dsx_fs' structure of 'fs_table'
>
> Signed-off-by: JieunKim <[email protected]>
Applied. Thanks.

Jonathan

> ---
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> index 9c3486a8134f..f2113a63721a 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> @@ -230,8 +230,8 @@ enum st_lsm6dsx_ext_sensor_id {
> * @i2c_addr: I2c slave address list.
> * @wai: Wai address info.
> * @id: external sensor id.
> - * @odr: Output data rate of the sensor [Hz].
> - * @gain: Configured sensor sensitivity.
> + * @odr_table: Output data rate of the sensor [Hz].
> + * @fs_table: Configured sensor sensitivity table depending on full scale.
> * @temp_comp: Temperature compensation register info (addr + mask).
> * @pwr_table: Power on register info (addr + mask).
> * @off_canc: Offset cancellation register info (addr + mask).