2020-02-06 15:12:38

by Alexis Ballier

[permalink] [raw]
Subject: [PATCH 1/2] arm64: dts: rockchip: rk3399-orangepi: Add ethernet phy.

Enables INTB.
The wiring is the same as the nanopi4, so this is heavily based on:
- [1a4e6203f0c] arm64: dts: rockchip: Add nanopi4 ethernet phy
- [bc43cee88aa] arm64: dts: rockchip: Update nanopi4 phy reset properties
by Robin Murphy.

Signed-off-by: Alexis Ballier <[email protected]>
Cc: [email protected]
Cc: Heiko Stuebner <[email protected]>
Cc: Robin Murphy <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
---
.../boot/dts/rockchip/rk3399-orangepi.dts | 31 ++++++++++++++++---
1 file changed, 27 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
index 9c659f3115c8..1767015e684c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
@@ -202,14 +202,27 @@ &gmac {
clock_in_out = "input";
phy-supply = <&vcc3v3_s3>;
phy-mode = "rgmii";
+ phy-handle = <&rtl8211e>;
pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 50000>;
+ pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>;
tx_delay = <0x28>;
rx_delay = <0x11>;
status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtl8211e: phy@1 {
+ reg = <1>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <30000>;
+ reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ };
+ };
};

&gpu {
@@ -537,6 +550,16 @@ pwr_btn: pwr-btn {
};
};

+ phy {
+ phy_intb: phy-intb {
+ rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ phy_rstb: phy-rstb {
+ rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins =
--
2.25.0


2020-02-06 15:12:50

by Alexis Ballier

[permalink] [raw]
Subject: [PATCH 2/2] arm64: dts: rockchip: rk3399-orangepi: Explicitly pinmix the regulator configuration GPIOs

Those GPIOs define which register is used by the GPU & CPUB regulators
for sleep mode. The register is defined here, so better have the GPIOs
explicitly set too.

Signed-off-by: Alexis Ballier <[email protected]>
Cc: [email protected]
Cc: Heiko Stuebner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
---
arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
index 1767015e684c..f9f7246d4d2f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
@@ -432,6 +432,8 @@ vdd_cpu_b: regulator@40 {
compatible = "silergy,syr827";
reg = <0x40>;
fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpu_b_sleep>;
regulator-name = "vdd_cpu_b";
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1500000>;
@@ -449,6 +451,8 @@ vdd_gpu: regulator@41 {
compatible = "silergy,syr828";
reg = <0x41>;
fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpu_sleep>;
regulator-name = "vdd_gpu";
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1500000>;
@@ -561,6 +565,14 @@ phy_rstb: phy-rstb {
};

pmic {
+ cpu_b_sleep: cpu-b-sleep {
+ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ gpu_sleep: gpu-sleep {
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
pmic_int_l: pmic-int-l {
rockchip,pins =
<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
--
2.25.0

2020-02-12 22:26:16

by Heiko Stuebner

[permalink] [raw]
Subject: Re: [PATCH 1/2] arm64: dts: rockchip: rk3399-orangepi: Add ethernet phy.

Am Donnerstag, 6. Februar 2020, 16:10:24 CET schrieb Alexis Ballier:
> Enables INTB.
> The wiring is the same as the nanopi4, so this is heavily based on:
> - [1a4e6203f0c] arm64: dts: rockchip: Add nanopi4 ethernet phy
> - [bc43cee88aa] arm64: dts: rockchip: Update nanopi4 phy reset properties
> by Robin Murphy.
>
> Signed-off-by: Alexis Ballier <[email protected]>
> Cc: [email protected]
> Cc: Heiko Stuebner <[email protected]>
> Cc: Robin Murphy <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]

applied both for 5.7

Thanks
Heiko