Linus,
here is my pull request for this cycle. I finally started using
'--edit-description' of 'git branch', so hopefully this is helpful to
you. Other than that, my pull request and some of the applied patches
are later than I would like, yet the christmas and holiday season were
shortening the working time of this cycle quite a bit. Still, all the
code got linux-next coverage and didn't show conflicts.
Please pull.
Thanks,
Wolfram
The following changes since commit b3a987b0264d3ddbb24293ebff10eddfc472f653:
Linux 5.5-rc6 (2020-01-12 16:55:08 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/for-5.6
for you to fetch changes up to b49f8e0e7bd17b968129790e40f9e2566f4f95ec:
i2c: cros-ec-tunnel: Fix ACPI identifier (2020-01-31 09:01:25 +0100)
----------------------------------------------------------------
(from the branch description for i2c/for-5.6 local branch)
The I2C subsystems has for 5.6:
- huge improvements and refactorizations of the Linux I2C documentation
(lots of thanks to Luca for doing it and Jean for the careful review)
- subsystem wide API conversion to i2c_new_client_device()
- remove obsolete parport-light driver
- smaller core updates (removal of 'extern', enabling more compile testing,
use more helper macros)
- and quite a bunch of driver updates (new IDs, simplifications, better PM,
support of atomic transfers and other improvements)
i2c-mux updates for 5.6:
- The main feature is the idle-state rework of the pca954x driver from
Biwen Li
at24 updates for 5.6:
- minor maintenance: update the license tag, sort headers
- move support for the write-protect pin into nvmem core
- add a reference to the new wp-gpios property in nvmem to at25 bindings
- add support for regulator and pm_runtime control
----------------------------------------------------------------
Akshu Agrawal (1):
i2c: cros-ec-tunnel: Fix slave device enumeration
Alain Volmat (1):
i2c: stm32f7: add PM_SLEEP suspend/resume support
Alex Williams (1):
i2c: cadence: Handle transfer_size rollover
Bartosz Golaszewski (3):
eeprom: at24: update the license tag
eeprom: at24: sort headers alphabetically
nvmem: fix a 'makes pointer from integer without a cast' build warning
Bibby Hsieh (2):
dt-binding: eeprom: at24: add vcc-supply property
misc: eeprom: at24: support pm_runtime control
Biwen Li (2):
dt-bindings: i2c: support property idle-state
i2c: mux: pca954x: support property idle-state
Christoph Müllner (1):
i2c: tiny-usb: Correct I2C fault codes.
Colin Ian King (2):
i2c: parport: fix spelling mistake: "Atmost" -> "At most"
i2c: xiic: fix indentation issue
Dmitry Osipenko (8):
i2c: tegra: Fix suspending in active runtime PM state
i2c: tegra: Properly disable runtime PM on driver's probe error
i2c: tegra: Prevent interrupt triggering after transfer timeout
i2c: tegra: Support atomic transfers
i2c: tegra: Rename I2C_PIO_MODE_MAX_LEN to I2C_PIO_MODE_PREFERRED_LEN
i2c: tegra: Use relaxed versions of readl/writel
i2c: tegra: Always terminate DMA transfer
i2c: tegra: Check DMA completion status in addition to left time
Eugen Hristev (2):
dt-bindings: i2c: at91: cosmetic formatting of compatible list
i2c: at91: remote default value initialization
Geert Uytterhoeven (3):
i2c: core: Use DEVICE_ATTR_*() helper macros
dt-bindings: i2c: rcar: Document r8a77961 support
dt-bindings: i2c: sh_mobile: Document r8a77961 support
Jarkko Nikula (1):
i2c: i801: Add support for Intel Comet Lake PCH-V
Khouloud Touil (5):
dt-bindings: nvmem: new optional property wp-gpios
nvmem: add support for the write-protect pin
dt-bindings: at24: make wp-gpios a reference to the property defined by nvmem
eeprom: at24: remove the write-protect pin support
dt-bindings: at25: add reference for the wp-gpios property
Krzysztof Kozlowski (6):
i2c: stu300: Use proper printk format for iomem pointer
i2c: pmcmsp: Use proper printk format for resource_size_t
i2c: pnx: Use proper printk format for resource_size_t
i2c: highlander: Use proper printk format for size_t
i2c: Enable compile testing for more drivers
i2c: exynos: Update Kconfig documentation
Luca Ceresoli (29):
i2c: remove unneeded 'extern' from function declatations
docs: i2c: sort index logically
docs: i2c: summary: extend introduction
docs: i2c: summary: rewrite the "terminology" section
docs: i2c: call it "I2C" consistently
docs: i2c: fix typo
docs: i2c: replace "I2C-transfer" -> "I2C transfer" consistently
docs: i2c: i2c-protocol: fix kernel-doc function syntax
docs: i2c: i2c-protocol: properly name start and stop conditions
docs: i2c: i2c-protocol: remove unneeded colons from table
docs: i2c: i2c-protocol: use proper names for ACK and NACK
docs: i2c: smbus-protocol: fix link syntax
docs: i2c: smbus-protocol: properly name start and stop conditions
docs: i2c: smbus-protocol: remove unneeded colons from table
docs: i2c: smbus-protocol: use proper names for ACK and NACK
docs: i2c: smbus-protocol: enable kernel-doc function syntax
docs: i2c: smbus-protocol: fix kernel-doc function syntax
docs: i2c: smbus-protocol: fix typo
docs: i2c: smbus-protocol: fix punctuation
docs: i2c: smbus-protocol: improve I2C Block transactions description
docs: i2c: instantiating-devices: fix internal hyperlink
docs: i2c: instantiating-devices: rearrange static instatiation
docs: i2c: instantiating-devices: use monospace for sysfs attributes
docs: i2c: old-module-parameters: fix internal hyperlink
docs: i2c: old-module-parameters: clarify this is for obsolete kernels
docs: i2c: old-module-parameters: use monospace instead of ""
docs: i2c: rename sections so the overall picture is clearer
docs: i2c: i2c-protocol: use same wording as smbus-protocol
docs: i2c: writing-clients: properly name the stop condition
Martin Blumenstingl (1):
i2c: meson: implement the master_xfer_atomic callback
Michal Simek (1):
i2c: cadence: Fix wording in i2c-cadence driver
Peter Rosin (1):
i2c: mux: pca9541: use the BIT macro
Raul E Rangel (1):
i2c: cros-ec-tunnel: Fix ACPI identifier
Shubhrajyoti Datta (3):
i2c: xiic: Add timeout to the rx fifo wait loop
i2c: xiic: Fix the clocking across bind unbind
i2c: cadence: Fix error printing in case of defer
Topi Kuutela (1):
i2c: cadence: Fix power management order of operations
Venkatesh Yadav Abbarapu (1):
i2c: xiic: defer the probe if clock is not found
Wolfram Sang (18):
i2c: parport-light: remove driver
i2c: parport: simplify Kconfig description
i2c: parport: move include file into main source
Merge branch 'i2c/for-current' into i2c/for-5.6
i2c: cht-wc: convert to use i2c_new_client_device()
i2c: i801: convert to use i2c_new_client_device()
i2c: nvidia-gpu: convert to use i2c_new_client_device()
i2c: ocores: convert to use i2c_new_client_device()
i2c: powermac: convert to use i2c_new_client_device()
i2c: taos-evm: convert to use i2c_new_client_device()
i2c: xiic: convert to use i2c_new_client_device()
i2c: i2c-core-acpi: convert to use i2c_new_client_device()
i2c: i2c-core-base: convert to use i2c_new_client_device()
i2c: i2c-core-of: convert to use i2c_new_client_device()
docs: i2c: use the new API in 'instantiating-devices.rst'
docs: i2c: use the new API in 'writing-clients'
Merge tag 'at24-updates-for-v5.6' of git://git.kernel.org/.../brgl/linux into i2c/for-5.6
Merge branch 'i2c-mux/for-next' of https://github.com/peda-r/i2c-mux into i2c/for-5.6
周琰杰 (Zhou Yanjie) (2):
dt-bindings: I2C: Add X1000 bindings.
I2C: JZ4780: Add support for the X1000.
with much appreciated quality assurance from
----------------------------------------------------------------
Andrew Lunn (1):
(Rev.) i2c: ocores: convert to use i2c_new_client_device()
Enric Balletbo i Serra (1):
(Rev.) i2c: cros-ec-tunnel: Fix slave device enumeration
Guenter Roeck (1):
(Rev.) i2c: mux: pca9541: use the BIT macro
Hans de Goede (2):
(Test) i2c: cht-wc: convert to use i2c_new_client_device()
(Rev.) i2c: cht-wc: convert to use i2c_new_client_device()
Ioana Ciornei (1):
(Test) i2c: mux: pca954x: support property idle-state
Jean Delvare (36):
(Rev.) i2c: i801: Add support for Intel Comet Lake PCH-V
(Rev.) docs: i2c: writing-clients: properly name the stop condition
(Rev.) docs: i2c: i2c-protocol: use same wording as smbus-protocol
(Rev.) docs: i2c: rename sections so the overall picture is clearer
(Rev.) docs: i2c: old-module-parameters: use monospace instead of ""
(Rev.) docs: i2c: old-module-parameters: clarify this is for obsolete kernels
(Rev.) docs: i2c: old-module-parameters: fix internal hyperlink
(Rev.) docs: i2c: instantiating-devices: use monospace for sysfs attributes
(Rev.) docs: i2c: instantiating-devices: rearrange static instatiation
(Rev.) docs: i2c: instantiating-devices: fix internal hyperlink
(Rev.) docs: i2c: smbus-protocol: improve I2C Block transactions description
(Rev.) docs: i2c: smbus-protocol: fix punctuation
(Rev.) docs: i2c: smbus-protocol: fix typo
(Rev.) docs: i2c: smbus-protocol: fix kernel-doc function syntax
(Rev.) docs: i2c: smbus-protocol: enable kernel-doc function syntax
(Rev.) docs: i2c: smbus-protocol: use proper names for ACK and NACK
(Rev.) docs: i2c: smbus-protocol: remove unneeded colons from table
(Rev.) docs: i2c: smbus-protocol: properly name start and stop conditions
(Rev.) docs: i2c: smbus-protocol: fix link syntax
(Rev.) docs: i2c: i2c-protocol: use proper names for ACK and NACK
(Rev.) docs: i2c: i2c-protocol: remove unneeded colons from table
(Rev.) docs: i2c: i2c-protocol: properly name start and stop conditions
(Rev.) docs: i2c: i2c-protocol: fix kernel-doc function syntax
(Rev.) docs: i2c: replace "I2C-transfer" -> "I2C transfer" consistently
(Rev.) docs: i2c: fix typo
(Rev.) docs: i2c: call it "I2C" consistently
(Rev.) docs: i2c: summary: rewrite the "terminology" section
(Rev.) docs: i2c: summary: extend introduction
(Rev.) docs: i2c: sort index logically
(Rev.) i2c: parport: fix spelling mistake: "Atmost" -> "At most"
(Rev.) i2c: taos-evm: convert to use i2c_new_client_device()
(Test) i2c: taos-evm: convert to use i2c_new_client_device()
(Rev.) i2c: i801: convert to use i2c_new_client_device()
(Rev.) i2c: parport: move include file into main source
(Rev.) i2c: parport: simplify Kconfig description
(Rev.) i2c: parport-light: remove driver
Kieran Bingham (1):
(Rev.) i2c: core: Use DEVICE_ATTR_*() helper macros
Linus Walleij (5):
(Rev.) i2c: stu300: Use proper printk format for iomem pointer
(Rev.) eeprom: at24: remove the write-protect pin support
(Rev.) dt-bindings: at24: make wp-gpios a reference to the property defined by nvmem
(Rev.) nvmem: add support for the write-protect pin
(Rev.) dt-bindings: nvmem: new optional property wp-gpios
Luca Ceresoli (1):
(Rev.) i2c: core: Use DEVICE_ATTR_*() helper macros
Ludovic Desroches (1):
(Rev.) i2c: at91: remote default value initialization
Michal Simek (1):
(Rev.) i2c: cadence: Handle transfer_size rollover
Neil Armstrong (1):
(Rev.) i2c: meson: implement the master_xfer_atomic callback
Peter Korsgaard (1):
(Rev.) i2c: ocores: convert to use i2c_new_client_device()
Rob Herring (5):
(Rev.) dt-binding: eeprom: at24: add vcc-supply property
(Rev.) dt-bindings: at25: add reference for the wp-gpios property
(Rev.) dt-bindings: at24: make wp-gpios a reference to the property defined by nvmem
(Rev.) dt-bindings: nvmem: new optional property wp-gpios
(Rev.) dt-bindings: i2c: support property idle-state
Shubhrajyoti Datta (2):
(Rev.) i2c: cadence: Handle transfer_size rollover
(Rev.) i2c: xiic: fix indentation issue
Thierry Reding (8):
(Test) i2c: tegra: Check DMA completion status in addition to left time
(Test) i2c: tegra: Always terminate DMA transfer
(Test) i2c: tegra: Use relaxed versions of readl/writel
(Test) i2c: tegra: Rename I2C_PIO_MODE_MAX_LEN to I2C_PIO_MODE_PREFERRED_LEN
(Test) i2c: tegra: Support atomic transfers
(Test) i2c: tegra: Prevent interrupt triggering after transfer timeout
(Test) i2c: tegra: Properly disable runtime PM on driver's probe error
(Test) i2c: tegra: Fix suspending in active runtime PM state
Vladimir Zapolskiy (1):
(Rev.) i2c: mux: pca9541: use the BIT macro
Documentation/devicetree/bindings/eeprom/at24.yaml | 9 +-
Documentation/devicetree/bindings/eeprom/at25.txt | 2 +
Documentation/devicetree/bindings/i2c/i2c-at91.txt | 14 +-
.../devicetree/bindings/i2c/i2c-jz4780.txt | 4 +-
.../devicetree/bindings/i2c/i2c-mux-pca954x.txt | 2 +
.../devicetree/bindings/i2c/renesas,i2c.txt | 3 +-
.../devicetree/bindings/i2c/renesas,iic.txt | 1 +
Documentation/devicetree/bindings/nvmem/nvmem.yaml | 11 +
Documentation/i2c/busses/i2c-parport-light.rst | 24 -
Documentation/i2c/busses/index.rst | 1 -
Documentation/i2c/dev-interface.rst | 24 +-
Documentation/i2c/dma-considerations.rst | 2 +-
Documentation/i2c/i2c-protocol.rst | 45 +-
Documentation/i2c/i2c-topology.rst | 72 +-
Documentation/i2c/i2c.svg | 1341 ++++++++++++++++++++
Documentation/i2c/index.rst | 58 +-
Documentation/i2c/instantiating-devices.rst | 123 +-
Documentation/i2c/old-module-parameters.rst | 31 +-
Documentation/i2c/slave-interface.rst | 4 +-
Documentation/i2c/smbus-protocol.rst | 107 +-
Documentation/i2c/summary.rst | 62 +-
Documentation/i2c/writing-clients.rst | 36 +-
MAINTAINERS | 2 -
drivers/i2c/busses/Kconfig | 107 +-
drivers/i2c/busses/Makefile | 1 -
drivers/i2c/busses/i2c-at91-core.c | 39 -
drivers/i2c/busses/i2c-cadence.c | 32 +-
drivers/i2c/busses/i2c-cht-wc.c | 6 +-
drivers/i2c/busses/i2c-cros-ec-tunnel.c | 3 +-
drivers/i2c/busses/i2c-highlander.c | 2 +-
drivers/i2c/busses/i2c-i801.c | 10 +-
drivers/i2c/busses/i2c-jz4780.c | 156 ++-
drivers/i2c/busses/i2c-meson.c | 97 +-
drivers/i2c/busses/i2c-nvidia-gpu.c | 6 +-
drivers/i2c/busses/i2c-ocores.c | 2 +-
drivers/i2c/busses/i2c-parport-light.c | 267 ----
drivers/i2c/busses/i2c-parport.c | 113 +-
drivers/i2c/busses/i2c-parport.h | 106 --
drivers/i2c/busses/i2c-pmcmsp.c | 6 +-
drivers/i2c/busses/i2c-pnx.c | 4 +-
drivers/i2c/busses/i2c-powermac.c | 8 +-
drivers/i2c/busses/i2c-stm32f7.c | 117 +-
drivers/i2c/busses/i2c-stu300.c | 2 +-
drivers/i2c/busses/i2c-taos-evm.c | 4 +-
drivers/i2c/busses/i2c-tegra.c | 216 ++--
drivers/i2c/busses/i2c-tiny-usb.c | 8 +-
drivers/i2c/busses/i2c-xiic.c | 69 +-
drivers/i2c/i2c-core-acpi.c | 12 +-
drivers/i2c/i2c-core-base.c | 33 +-
drivers/i2c/i2c-core-of.c | 7 +-
drivers/i2c/muxes/i2c-mux-pca9541.c | 29 +-
drivers/i2c/muxes/i2c-mux-pca954x.c | 69 +-
drivers/misc/eeprom/at24.c | 72 +-
drivers/nvmem/core.c | 19 +-
drivers/nvmem/nvmem.h | 2 +
include/linux/i2c.h | 115 +-
include/linux/nvmem-provider.h | 3 +
57 files changed, 2604 insertions(+), 1116 deletions(-)
delete mode 100644 Documentation/i2c/busses/i2c-parport-light.rst
create mode 100644 Documentation/i2c/i2c.svg
delete mode 100644 drivers/i2c/busses/i2c-parport-light.c
delete mode 100644 drivers/i2c/busses/i2c-parport.h
The pull request you sent on Fri, 7 Feb 2020 18:19:27 +0100:
> git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/for-5.6
has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/11777ee8b04acab07c96959e9c6ac6a1603d0958
Thank you!
--
Deet-doot-dot, I am a bot.
https://korg.wiki.kernel.org/userdoc/prtracker