The /proc/<pid>/fsuid_map file can be written once to setup an fsuid mapping
for a user namespace. Writing to this file has the same restrictions as writing
to /proc/<pid>/fsuid_map:
root@e1-vm:/# cat /proc/13023/fsuid_map
0 300000 100000
Fsid mappings have always been around. They are currently always identical to
the id mappings for a user namespace. This means, currently whenever an fsid
needs to be looked up the kernel will use the id mapping of the user namespace.
With the introduction of fsid mappings the kernel will now lookup fsids in the
fsid mappings of the user namespace. If no fsid mapping exists the kernel will
continue looking up fsids in the id mappings of the user namespace. Hence, if a
system supports fsid mappings through /proc/<pid>/fs*id_map and a container
runtime is not aware of fsid mappings it or does not use them it will it will
continue to work just as before.
Signed-off-by: Christian Brauner <[email protected]>
---
/* v2 */
unchanged
/* v3 */
- Christian Brauner <[email protected]>:
- Fix grammar in commit message.
---
fs/proc/base.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/fs/proc/base.c b/fs/proc/base.c
index c7c64272b0fa..5fb28004663e 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -2970,6 +2970,13 @@ static int proc_projid_map_open(struct inode *inode, struct file *file)
return proc_id_map_open(inode, file, &proc_projid_seq_operations);
}
+#ifdef CONFIG_USER_NS_FSID
+static int proc_fsuid_map_open(struct inode *inode, struct file *file)
+{
+ return proc_id_map_open(inode, file, &proc_fsuid_seq_operations);
+}
+#endif
+
static const struct file_operations proc_uid_map_operations = {
.open = proc_uid_map_open,
.write = proc_uid_map_write,
@@ -2994,6 +3001,16 @@ static const struct file_operations proc_projid_map_operations = {
.release = proc_id_map_release,
};
+#ifdef CONFIG_USER_NS_FSID
+static const struct file_operations proc_fsuid_map_operations = {
+ .open = proc_fsuid_map_open,
+ .write = proc_fsuid_map_write,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = proc_id_map_release,
+};
+#endif
+
static int proc_setgroups_open(struct inode *inode, struct file *file)
{
struct user_namespace *ns = NULL;
@@ -3176,6 +3193,9 @@ static const struct pid_entry tgid_base_stuff[] = {
ONE("io", S_IRUSR, proc_tgid_io_accounting),
#endif
#ifdef CONFIG_USER_NS
+#ifdef CONFIG_USER_NS_FSID
+ REG("fsuid_map", S_IRUGO|S_IWUSR, proc_fsuid_map_operations),
+#endif
REG("uid_map", S_IRUGO|S_IWUSR, proc_uid_map_operations),
REG("gid_map", S_IRUGO|S_IWUSR, proc_gid_map_operations),
REG("projid_map", S_IRUGO|S_IWUSR, proc_projid_map_operations),
--
2.25.0
On Tue, Feb 18, 2020 at 03:33:48PM +0100, Christian Brauner wrote:
> The /proc/<pid>/fsuid_map file can be written once to setup an fsuid mapping
> for a user namespace. Writing to this file has the same restrictions as writing
> to /proc/<pid>/fsuid_map:
>
> root@e1-vm:/# cat /proc/13023/fsuid_map
> 0 300000 100000
>
> Fsid mappings have always been around. They are currently always identical to
> the id mappings for a user namespace. This means, currently whenever an fsid
> needs to be looked up the kernel will use the id mapping of the user namespace.
> With the introduction of fsid mappings the kernel will now lookup fsids in the
> fsid mappings of the user namespace. If no fsid mapping exists the kernel will
> continue looking up fsids in the id mappings of the user namespace. Hence, if a
> system supports fsid mappings through /proc/<pid>/fs*id_map and a container
> runtime is not aware of fsid mappings it or does not use them it will it will
> continue to work just as before.
>
> Signed-off-by: Christian Brauner <[email protected]>
Acked-by: Serge Hallyn <[email protected]>
> ---
> /* v2 */
> unchanged
>
> /* v3 */
> - Christian Brauner <[email protected]>:
> - Fix grammar in commit message.
> ---
> fs/proc/base.c | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/fs/proc/base.c b/fs/proc/base.c
> index c7c64272b0fa..5fb28004663e 100644
> --- a/fs/proc/base.c
> +++ b/fs/proc/base.c
> @@ -2970,6 +2970,13 @@ static int proc_projid_map_open(struct inode *inode, struct file *file)
> return proc_id_map_open(inode, file, &proc_projid_seq_operations);
> }
>
> +#ifdef CONFIG_USER_NS_FSID
> +static int proc_fsuid_map_open(struct inode *inode, struct file *file)
> +{
> + return proc_id_map_open(inode, file, &proc_fsuid_seq_operations);
> +}
> +#endif
> +
> static const struct file_operations proc_uid_map_operations = {
> .open = proc_uid_map_open,
> .write = proc_uid_map_write,
> @@ -2994,6 +3001,16 @@ static const struct file_operations proc_projid_map_operations = {
> .release = proc_id_map_release,
> };
>
> +#ifdef CONFIG_USER_NS_FSID
> +static const struct file_operations proc_fsuid_map_operations = {
> + .open = proc_fsuid_map_open,
> + .write = proc_fsuid_map_write,
> + .read = seq_read,
> + .llseek = seq_lseek,
> + .release = proc_id_map_release,
> +};
> +#endif
> +
> static int proc_setgroups_open(struct inode *inode, struct file *file)
> {
> struct user_namespace *ns = NULL;
> @@ -3176,6 +3193,9 @@ static const struct pid_entry tgid_base_stuff[] = {
> ONE("io", S_IRUSR, proc_tgid_io_accounting),
> #endif
> #ifdef CONFIG_USER_NS
> +#ifdef CONFIG_USER_NS_FSID
> + REG("fsuid_map", S_IRUGO|S_IWUSR, proc_fsuid_map_operations),
> +#endif
> REG("uid_map", S_IRUGO|S_IWUSR, proc_uid_map_operations),
> REG("gid_map", S_IRUGO|S_IWUSR, proc_gid_map_operations),
> REG("projid_map", S_IRUGO|S_IWUSR, proc_projid_map_operations),
> --
> 2.25.0