Convert the UniPhier GPIO controller binding to DT schema format.
I omitted the 'gpio-ranges' property because it is defined in the
dt-schema project (/schemas/gpio/gpio.yaml).
As of writing, the 'gpio-ranges-group-names' is not defined in that
file despite it is a common property described in
Documentation/devicetree/bindings/gpio/gpio.txt
So, I defined it in this schema.
Signed-off-by: Masahiro Yamada <[email protected]>
---
Changes in v2:
- fix the build error in the example
.../bindings/gpio/gpio-uniphier.txt | 51 ----------
.../gpio/socionext,uniphier-gpio.yaml | 92 +++++++++++++++++++
MAINTAINERS | 2 +-
3 files changed, 93 insertions(+), 52 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-uniphier.txt
create mode 100644 Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
diff --git a/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt b/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt
deleted file mode 100644
index f281f12dac18..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-UniPhier GPIO controller
-
-Required properties:
-- compatible: Should be "socionext,uniphier-gpio".
-- reg: Specifies offset and length of the register set for the device.
-- gpio-controller: Marks the device node as a GPIO controller.
-- #gpio-cells: Should be 2. The first cell is the pin number and the second
- cell is used to specify optional parameters.
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Should be 2. The first cell defines the interrupt number.
- The second cell bits[3:0] is used to specify trigger type as follows:
- 1 = low-to-high edge triggered
- 2 = high-to-low edge triggered
- 4 = active high level-sensitive
- 8 = active low level-sensitive
- Valid combinations are 1, 2, 3, 4, 8.
-- ngpios: Specifies the number of GPIO lines.
-- gpio-ranges: Mapping to pin controller pins (as described in gpio.txt)
-- socionext,interrupt-ranges: Specifies an interrupt number mapping between
- this GPIO controller and its interrupt parent, in the form of arbitrary
- number of <child-interrupt-base parent-interrupt-base length> triplets.
-
-Optional properties:
-- gpio-ranges-group-names: Used for named gpio ranges (as described in gpio.txt)
-
-Example:
- gpio: gpio@55000000 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x55000000 0x200>;
- interrupt-parent = <&aidet>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pinctrl 0 0 0>;
- gpio-ranges-group-names = "gpio_range";
- ngpios = <248>;
- socionext,interrupt-ranges = <0 48 16>, <16 154 5>, <21 217 3>;
- };
-
-Consumer Example:
-
- sdhci0_pwrseq {
- compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpio UNIPHIER_GPIO_PORT(29, 4) GPIO_ACTIVE_LOW>;
- };
-
-Please note UNIPHIER_GPIO_PORT(29, 4) represents PORT294 in the SoC document.
-Unfortunately, only the one's place is octal in the port numbering. (That is,
-PORT 8, 9, 18, 19, 28, 29, ... are missing.) UNIPHIER_GPIO_PORT() is a helper
-macro to calculate 29 * 8 + 4.
diff --git a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
new file mode 100644
index 000000000000..580a39e09d39
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/socionext,uniphier-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier GPIO controller
+
+maintainers:
+ - Masahiro Yamada <[email protected]>
+
+properties:
+ $nodename:
+ pattern: "^gpio@[0-9a-f]+$"
+
+ compatible:
+ const: socionext,uniphier-gpio
+
+ reg:
+ maxItems: 1
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ description: |
+ The first cell defines the interrupt number.
+ The second cell bits[3:0] is used to specify trigger type as follows:
+ 1 = low-to-high edge triggered
+ 2 = high-to-low edge triggered
+ 4 = active high level-sensitive
+ 8 = active low level-sensitive
+ Valid combinations are 1, 2, 3, 4, 8.
+ const: 2
+
+ ngpios:
+ minimum: 0
+ maximum: 512
+
+ gpio-ranges-group-names:
+ $ref: /schemas/types.yaml#/definitions/string-array
+
+ socionext,interrupt-ranges:
+ description: |
+ Specifies an interrupt number mapping between this GPIO controller and
+ its interrupt parent, in the form of arbitrary number of
+ <child-interrupt-base parent-interrupt-base length> triplets.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - "#gpio-cells"
+ - interrupt-controller
+ - "#interrupt-cells"
+ - ngpios
+ - gpio-ranges
+ - socionext,interrupt-ranges
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/gpio/uniphier-gpio.h>
+
+ gpio: gpio@55000000 {
+ compatible = "socionext,uniphier-gpio";
+ reg = <0x55000000 0x200>;
+ interrupt-parent = <&aidet>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 0 0>;
+ gpio-ranges-group-names = "gpio_range";
+ ngpios = <248>;
+ socionext,interrupt-ranges = <0 48 16>, <16 154 5>, <21 217 3>;
+ };
+
+ // Consumer:
+ // Please note UNIPHIER_GPIO_PORT(29, 4) represents PORT294 in the SoC
+ // document. Unfortunately, only the one's place is octal in the port
+ // numbering. (That is, PORT 8, 9, 18, 19, 28, 29, ... do not exist.)
+ // UNIPHIER_GPIO_PORT() is a helper macro to calculate 29 * 8 + 4.
+ sdhci0_pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio UNIPHIER_GPIO_PORT(29, 4) GPIO_ACTIVE_LOW>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 93ccb6708ae9..3cb4c8a9107d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2547,7 +2547,7 @@ L: [email protected] (moderated for non-subscribers)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier.git
S: Maintained
F: Documentation/devicetree/bindings/arm/socionext/uniphier.yaml
-F: Documentation/devicetree/bindings/gpio/gpio-uniphier.txt
+F: Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
F: Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.txt
F: arch/arm/boot/dts/uniphier*
F: arch/arm/include/asm/hardware/cache-uniphier.h
--
2.17.1