In the variant RC5T619 the mfd has an RTC. This patchset adds
support for it. To do so it adds the missing register defines in
rn5t618.h and general irq handling for that.
It seems that the irq definitions are the same except missing RTC
for the RN5T618 but due to missing ability to test that I do not
add them here.
The rtc driver itself is based on
https://github.com/kobolabs/Kobo-Reader/blob/master/hw/imx6sll-clara/kernel.tar.bz2
but heavily reworked.
It was tested on the Kobo Clara HD.
For cleaning up there is a separate off-topic patch:
mfd: rn5t618: cleanup i2c_device_id
Changes in v5:
- static rn5t618_irq_init
- PLATFORM_DEVID_NONE
- added some Acked-Bys
Changes in v4:
- use macros for IRQ definitions
- merge rn5t618-core.c and rn5t618-irq.c
Changes in v3:
- alignment cleanup
- output cleanup, remove useless toggling of alarm flag in rtc probe
- updated bindings description, so patch 1/5 becomes 2/6 and so on
Changes in v2:
- no dead code in irq code
- various improvements and cleanups in rtc driver itself
Andreas Kemnade (5):
dt-bindings: mfd: rn5t618: Document optional property interrupts
mfd: rn5t618: add IRQ support
mfd: rn5t618: add RTC related registers
mfd: rn5t618: add more subdevices
rtc: rc5t619: add ricoh rc5t619 RTC driver
Documentation/devicetree/bindings/mfd/rn5t618.txt | 4 +
drivers/mfd/Kconfig | 1 +
drivers/mfd/rn5t618.c | 109 +++++-
drivers/rtc/Kconfig | 10 +
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-rc5t619.c | 444 ++++++++++++++++++++++
include/linux/mfd/rn5t618.h | 26 ++
7 files changed, 593 insertions(+), 2 deletions(-)
create mode 100644 drivers/rtc/rtc-rc5t619.c
--
2.11.0
This adds support for IRQ handling in the RC5T619 which is required
for properly implementing subdevices like RTC.
For now only definitions for the variant RC5T619 are included.
Signed-off-by: Andreas Kemnade <[email protected]>
---
Changes in v5:
rn5t618_irq_init static
Changes in v4:
merge rn5t618-irq.c into rn5t618.c
use macros for IRQ table
Changes in v3:
alignment cleanup
Changes in v2:
- no dead code, did some more testing and thinking for that
- remove extra empty lines
drivers/mfd/Kconfig | 1 +
drivers/mfd/rn5t618.c | 88 +++++++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/rn5t618.h | 15 ++++++++
3 files changed, 104 insertions(+)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index ae24d3ea68ea..522e068d0082 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1057,6 +1057,7 @@ config MFD_RN5T618
depends on OF
select MFD_CORE
select REGMAP_I2C
+ select REGMAP_IRQ
help
Say yes here to add support for the Ricoh RN5T567,
RN5T618, RC5T619 PMIC.
diff --git a/drivers/mfd/rn5t618.c b/drivers/mfd/rn5t618.c
index da5cd9c92a59..fbd31397b047 100644
--- a/drivers/mfd/rn5t618.c
+++ b/drivers/mfd/rn5t618.c
@@ -8,6 +8,8 @@
#include <linux/delay.h>
#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
#include <linux/mfd/core.h>
#include <linux/mfd/rn5t618.h>
#include <linux/module.h>
@@ -45,9 +47,63 @@ static const struct regmap_config rn5t618_regmap_config = {
.cache_type = REGCACHE_RBTREE,
};
+static const struct regmap_irq rc5t619_irqs[] = {
+ REGMAP_IRQ_REG(RN5T618_IRQ_SYS, 0, BIT(0)),
+ REGMAP_IRQ_REG(RN5T618_IRQ_DCDC, 0, BIT(1)),
+ REGMAP_IRQ_REG(RN5T618_IRQ_RTC, 0, BIT(2)),
+ REGMAP_IRQ_REG(RN5T618_IRQ_ADC, 0, BIT(3)),
+ REGMAP_IRQ_REG(RN5T618_IRQ_GPIO, 0, BIT(4)),
+ REGMAP_IRQ_REG(RN5T618_IRQ_CHG, 0, BIT(6)),
+};
+
+static const struct regmap_irq_chip rc5t619_irq_chip = {
+ .name = "rc5t619",
+ .irqs = rc5t619_irqs,
+ .num_irqs = ARRAY_SIZE(rc5t619_irqs),
+ .num_regs = 1,
+ .status_base = RN5T618_INTMON,
+ .mask_base = RN5T618_INTEN,
+ .mask_invert = true,
+};
+
static struct rn5t618 *rn5t618_pm_power_off;
static struct notifier_block rn5t618_restart_handler;
+static int rn5t618_irq_init(struct rn5t618 *rn5t618)
+{
+ const struct regmap_irq_chip *irq_chip;
+ int ret;
+
+ if (!rn5t618->irq)
+ return 0;
+
+ switch (rn5t618->variant) {
+ case RC5T619:
+ irq_chip = &rc5t619_irq_chip;
+ break;
+ default:
+ irq_chip = NULL;
+ break;
+ }
+
+ if (!irq_chip) {
+ dev_err(rn5t618->dev, "Currently no IRQ support for variant %d\n",
+ (int)rn5t618->variant);
+ return -ENOENT;
+ }
+
+ ret = devm_regmap_add_irq_chip(rn5t618->dev, rn5t618->regmap,
+ rn5t618->irq,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ 0, irq_chip, &rn5t618->irq_data);
+ if (ret) {
+ dev_err(rn5t618->dev, "Failed to register IRQ chip\n");
+ return ret;
+ }
+
+ return 0;
+}
+
static void rn5t618_trigger_poweroff_sequence(bool repower)
{
/* disable automatic repower-on */
@@ -105,6 +161,8 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c,
i2c_set_clientdata(i2c, priv);
priv->variant = (long)of_id->data;
+ priv->irq = i2c->irq;
+ priv->dev = &i2c->dev;
priv->regmap = devm_regmap_init_i2c(i2c, &rn5t618_regmap_config);
if (IS_ERR(priv->regmap)) {
@@ -137,6 +195,11 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c,
return ret;
}
+ if (priv->irq > 0) {
+ if (rn5t618_irq_init(priv))
+ priv->irq = 0;
+ }
+
return 0;
}
@@ -154,15 +217,40 @@ static int rn5t618_i2c_remove(struct i2c_client *i2c)
return 0;
}
+static int __maybe_unused rn5t618_i2c_suspend(struct device *dev)
+{
+ struct rn5t618 *priv = dev_get_drvdata(dev);
+
+ if (priv->irq)
+ disable_irq(priv->irq);
+
+ return 0;
+}
+
+static int __maybe_unused rn5t618_i2c_resume(struct device *dev)
+{
+ struct rn5t618 *priv = dev_get_drvdata(dev);
+
+ if (priv->irq)
+ enable_irq(priv->irq);
+
+ return 0;
+}
+
static const struct i2c_device_id rn5t618_i2c_id[] = {
{ }
};
MODULE_DEVICE_TABLE(i2c, rn5t618_i2c_id);
+static SIMPLE_DEV_PM_OPS(rn5t618_i2c_dev_pm_ops,
+ rn5t618_i2c_suspend,
+ rn5t618_i2c_resume);
+
static struct i2c_driver rn5t618_i2c_driver = {
.driver = {
.name = "rn5t618",
.of_match_table = of_match_ptr(rn5t618_of_match),
+ .pm = &rn5t618_i2c_dev_pm_ops,
},
.probe = rn5t618_i2c_probe,
.remove = rn5t618_i2c_remove,
diff --git a/include/linux/mfd/rn5t618.h b/include/linux/mfd/rn5t618.h
index d62ef48060b5..739571656f2b 100644
--- a/include/linux/mfd/rn5t618.h
+++ b/include/linux/mfd/rn5t618.h
@@ -242,9 +242,24 @@ enum {
RC5T619,
};
+/* RN5T618 IRQ definitions */
+enum {
+ RN5T618_IRQ_SYS = 0,
+ RN5T618_IRQ_DCDC,
+ RN5T618_IRQ_RTC,
+ RN5T618_IRQ_ADC,
+ RN5T618_IRQ_GPIO,
+ RN5T618_IRQ_CHG,
+ RN5T618_NR_IRQS,
+};
+
struct rn5t618 {
struct regmap *regmap;
+ struct device *dev;
long variant;
+
+ int irq;
+ struct regmap_irq_chip_data *irq_data;
};
#endif /* __LINUX_MFD_RN5T618_H */
--
2.11.0
These chips use interrupts for various things like RTC alarm.
Signed-off-by: Andreas Kemnade <[email protected]>
Acked-for-MFD-by: Lee Jones <[email protected]>
Acked-by: Rob Herring <[email protected]>
---
Changes in v4: add refernce to interrupt binding
documentation
Documentation/devicetree/bindings/mfd/rn5t618.txt | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/rn5t618.txt b/Documentation/devicetree/bindings/mfd/rn5t618.txt
index b74e5e94d1cb..16778ea00dbc 100644
--- a/Documentation/devicetree/bindings/mfd/rn5t618.txt
+++ b/Documentation/devicetree/bindings/mfd/rn5t618.txt
@@ -15,6 +15,8 @@ Required properties:
- reg: the I2C slave address of the device
Optional properties:
+ - interrupts: interrupt mapping for IRQ
+ See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
- system-power-controller:
See Documentation/devicetree/bindings/power/power-controller.txt
@@ -32,6 +34,8 @@ Example:
pmic@32 {
compatible = "ricoh,rn5t618";
reg = <0x32>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
system-power-controller;
regulators {
--
2.11.0
Defines for some RTC related registers were missing, also
they were not included in the volatile register list
Signed-off-by: Andreas Kemnade <[email protected]>
Acked-for-MFD-by: Lee Jones <[email protected]>
---
drivers/mfd/rn5t618.c | 2 ++
include/linux/mfd/rn5t618.h | 11 +++++++++++
2 files changed, 13 insertions(+)
diff --git a/drivers/mfd/rn5t618.c b/drivers/mfd/rn5t618.c
index fbd31397b047..6bdc5a023cbf 100644
--- a/drivers/mfd/rn5t618.c
+++ b/drivers/mfd/rn5t618.c
@@ -33,6 +33,8 @@ static bool rn5t618_volatile_reg(struct device *dev, unsigned int reg)
case RN5T618_IR_GPF:
case RN5T618_MON_IOIN:
case RN5T618_INTMON:
+ case RN5T618_RTC_CTRL1 ... RN5T618_RTC_CTRL2:
+ case RN5T618_RTC_SECONDS ... RN5T618_RTC_YEAR:
return true;
default:
return false;
diff --git a/include/linux/mfd/rn5t618.h b/include/linux/mfd/rn5t618.h
index 739571656f2b..fba0df13d9a8 100644
--- a/include/linux/mfd/rn5t618.h
+++ b/include/linux/mfd/rn5t618.h
@@ -139,6 +139,17 @@
#define RN5T618_INTPOL 0x9c
#define RN5T618_INTEN 0x9d
#define RN5T618_INTMON 0x9e
+
+#define RN5T618_RTC_SECONDS 0xA0
+#define RN5T618_RTC_MDAY 0xA4
+#define RN5T618_RTC_MONTH 0xA5
+#define RN5T618_RTC_YEAR 0xA6
+#define RN5T618_RTC_ADJUST 0xA7
+#define RN5T618_RTC_ALARM_Y_SEC 0xA8
+#define RN5T618_RTC_DAL_MONTH 0xAC
+#define RN5T618_RTC_CTRL1 0xAE
+#define RN5T618_RTC_CTRL2 0xAF
+
#define RN5T618_PREVINDAC 0xb0
#define RN5T618_BATDAC 0xb1
#define RN5T618_CHGCTL1 0xb3
--
2.11.0
The RC5T619 has a RTC which is missing in the
RN5T618. Add it as subdevice to prepare for their implementation.
Signed-off-by: Andreas Kemnade <[email protected]>
---
Changes in v3:
- alignment cleanup
drivers/mfd/rn5t618.c | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/mfd/rn5t618.c b/drivers/mfd/rn5t618.c
index 6bdc5a023cbf..ec378715137b 100644
--- a/drivers/mfd/rn5t618.c
+++ b/drivers/mfd/rn5t618.c
@@ -14,6 +14,7 @@
#include <linux/mfd/rn5t618.h>
#include <linux/module.h>
#include <linux/of_device.h>
+#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <linux/regmap.h>
@@ -22,6 +23,12 @@ static const struct mfd_cell rn5t618_cells[] = {
{ .name = "rn5t618-wdt" },
};
+static const struct mfd_cell rc5t619_cells[] = {
+ { .name = "rn5t618-regulator" },
+ { .name = "rc5t619-rtc" },
+ { .name = "rn5t618-wdt" },
+};
+
static bool rn5t618_volatile_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
@@ -173,8 +180,16 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c,
return ret;
}
- ret = devm_mfd_add_devices(&i2c->dev, -1, rn5t618_cells,
- ARRAY_SIZE(rn5t618_cells), NULL, 0, NULL);
+ if (priv->variant == RC5T619)
+ ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE,
+ rc5t619_cells,
+ ARRAY_SIZE(rc5t619_cells),
+ NULL, 0, NULL);
+ else
+ ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE,
+ rn5t618_cells,
+ ARRAY_SIZE(rn5t618_cells),
+ NULL, 0, NULL);
if (ret) {
dev_err(&i2c->dev, "failed to add sub-devices: %d\n", ret);
return ret;
--
2.11.0
Add an RTC driver for the RTC device on Ricoh MFD RC5T619,
which is implemented as a variant of RN5T618.
rtc-range output:
Testing 2000-02-28 23:59:59.
OK
Testing 2038-01-19 03:14:07.
OK
Testing 2069-12-31 23:59:59.
OK
Testing 2099-12-31 23:59:59.
KO RTC_RD_TIME returned 22 (line 138)
Testing 2100-02-28 23:59:59.
KO RTC_SET_TIME returned 34 (line 122)
Testing 2106-02-07 06:28:15.
KO RTC_SET_TIME returned 34 (line 122)
Testing 2262-04-11 23:47:16.
KO RTC_SET_TIME returned 34 (line 122)
Signed-off-by: Andreas Kemnade <[email protected]>
Acked-by: Alexandre Belloni <[email protected]>
---
Changes in v3:
- further output cleanup
- remove useless toggling of alarm flag in rtc probe
- alignment cleanup
Changes in v2:
- correct subject line
- reset pon flag not at probe but later
- initialize things only on pon
- 12h handling
- ranges
- style cleanup
- less magic values
drivers/rtc/Kconfig | 10 ++
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-rc5t619.c | 444 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 455 insertions(+)
create mode 100644 drivers/rtc/rtc-rc5t619.c
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 1adf9f815652..b8e5bfa8efc6 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -600,6 +600,16 @@ config RTC_DRV_RC5T583
This driver can also be built as a module. If so, the module
will be called rtc-rc5t583.
+config RTC_DRV_RC5T619
+ tristate "RICOH RC5T619 RTC driver"
+ depends on MFD_RN5T618
+ help
+ If you say yes here you get support for the RTC on the
+ RICOH RC5T619 chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-rc5t619.
+
config RTC_DRV_S35390A
tristate "Seiko Instruments S-35390A"
select BITREVERSE
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 4ac8f19fb631..7612912cdf00 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -137,6 +137,7 @@ obj-$(CONFIG_RTC_DRV_PXA) += rtc-pxa.o
obj-$(CONFIG_RTC_DRV_R7301) += rtc-r7301.o
obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o
obj-$(CONFIG_RTC_DRV_RC5T583) += rtc-rc5t583.o
+obj-$(CONFIG_RTC_DRV_RC5T619) += rtc-rc5t619.o
obj-$(CONFIG_RTC_DRV_RK808) += rtc-rk808.o
obj-$(CONFIG_RTC_DRV_RP5C01) += rtc-rp5c01.o
obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o
diff --git a/drivers/rtc/rtc-rc5t619.c b/drivers/rtc/rtc-rc5t619.c
new file mode 100644
index 000000000000..24e386ecbc7e
--- /dev/null
+++ b/drivers/rtc/rtc-rc5t619.c
@@ -0,0 +1,444 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * drivers/rtc/rtc-rc5t619.c
+ *
+ * Real time clock driver for RICOH RC5T619 power management chip.
+ *
+ * Copyright (C) 2019 Andreas Kemnade
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mfd/rn5t618.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+#include <linux/irqdomain.h>
+
+struct rc5t619_rtc {
+ int irq;
+ struct rtc_device *rtc;
+ struct rn5t618 *rn5t618;
+};
+
+#define CTRL1_ALARM_ENABLED 0x40
+#define CTRL1_24HR 0x20
+#define CTRL1_PERIODIC_MASK 0xf
+
+#define CTRL2_PON 0x10
+#define CTRL2_ALARM_STATUS 0x80
+#define CTRL2_CTFG 0x4
+#define CTRL2_CTC 0x1
+
+#define MONTH_CENTFLAG 0x80
+#define HOUR_PMFLAG 0x20
+#define MDAY_DAL_EXT 0x80
+
+static uint8_t rtc5t619_12hour_bcd2bin(uint8_t hour)
+{
+ if (hour & HOUR_PMFLAG) {
+ hour = bcd2bin(hour & ~HOUR_PMFLAG);
+ return hour == 12 ? 12 : 12 + hour;
+ }
+
+ hour = bcd2bin(hour);
+ return hour == 12 ? 0 : hour;
+}
+
+static uint8_t rtc5t619_12hour_bin2bcd(uint8_t hour)
+{
+ if (!hour)
+ return 0x12;
+
+ if (hour < 12)
+ return bin2bcd(hour);
+
+ if (hour == 12)
+ return 0x12 | HOUR_PMFLAG;
+
+ return bin2bcd(hour - 12) | HOUR_PMFLAG;
+}
+
+static int rc5t619_rtc_periodic_disable(struct device *dev)
+{
+ struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+ int err;
+
+ /* disable function */
+ err = regmap_update_bits(rtc->rn5t618->regmap,
+ RN5T618_RTC_CTRL1, CTRL1_PERIODIC_MASK, 0);
+ if (err < 0)
+ return err;
+
+ /* clear alarm flag and CTFG */
+ err = regmap_update_bits(rtc->rn5t618->regmap, RN5T618_RTC_CTRL2,
+ CTRL2_ALARM_STATUS | CTRL2_CTFG | CTRL2_CTC,
+ 0);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+/* things to be done once after power on */
+static int rc5t619_rtc_pon_setup(struct device *dev)
+{
+ struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+ int err;
+ unsigned int reg_data;
+
+ err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL2, ®_data);
+ if (err < 0)
+ return err;
+
+ /* clear VDET PON */
+ reg_data &= ~(CTRL2_PON | CTRL2_CTC | 0x4a); /* 0101-1011 */
+ reg_data |= 0x20; /* 0010-0000 */
+ err = regmap_write(rtc->rn5t618->regmap, RN5T618_RTC_CTRL2, reg_data);
+ if (err < 0)
+ return err;
+
+ /* clearing RTC Adjust register */
+ err = regmap_write(rtc->rn5t618->regmap, RN5T618_RTC_ADJUST, 0);
+ if (err)
+ return err;
+
+ return regmap_update_bits(rtc->rn5t618->regmap,
+ RN5T618_RTC_CTRL1,
+ CTRL1_24HR, CTRL1_24HR);
+}
+
+static int rc5t619_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+ u8 buff[7];
+ int err;
+ int cent_flag;
+ unsigned int ctrl1;
+ unsigned int ctrl2;
+
+ err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL2, &ctrl2);
+ if (err < 0)
+ return err;
+
+ if (ctrl2 & CTRL2_PON)
+ return -EINVAL;
+
+ err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL1, &ctrl1);
+ if (err < 0)
+ return err;
+
+ err = regmap_bulk_read(rtc->rn5t618->regmap, RN5T618_RTC_SECONDS,
+ buff, sizeof(buff));
+ if (err < 0)
+ return err;
+
+ if (buff[5] & MONTH_CENTFLAG)
+ cent_flag = 1;
+ else
+ cent_flag = 0;
+
+ tm->tm_sec = bcd2bin(buff[0]);
+ tm->tm_min = bcd2bin(buff[1]);
+
+ if (ctrl1 & CTRL1_24HR)
+ tm->tm_hour = bcd2bin(buff[2]);
+ else
+ tm->tm_hour = rtc5t619_12hour_bcd2bin(buff[2]);
+
+ tm->tm_wday = bcd2bin(buff[3]);
+ tm->tm_mday = bcd2bin(buff[4]);
+ tm->tm_mon = bcd2bin(buff[5] & 0x1f) - 1; /* back to system 0-11 */
+ tm->tm_year = bcd2bin(buff[6]) + 100 * cent_flag;
+
+ return 0;
+}
+
+static int rc5t619_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+ u8 buff[7];
+ int err;
+ int cent_flag;
+ unsigned int ctrl1;
+ unsigned int ctrl2;
+
+ err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL2, &ctrl2);
+ if (err < 0)
+ return err;
+
+ if (ctrl2 & CTRL2_PON)
+ rc5t619_rtc_pon_setup(dev);
+
+ err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL1, &ctrl1);
+ if (err < 0)
+ return err;
+
+ if (tm->tm_year >= 100)
+ cent_flag = 1;
+ else
+ cent_flag = 0;
+
+ buff[0] = bin2bcd(tm->tm_sec);
+ buff[1] = bin2bcd(tm->tm_min);
+
+ if (ctrl1 & CTRL1_24HR)
+ buff[2] = bin2bcd(tm->tm_hour);
+ else
+ buff[2] = rtc5t619_12hour_bin2bcd(tm->tm_hour);
+
+ buff[3] = bin2bcd(tm->tm_wday);
+ buff[4] = bin2bcd(tm->tm_mday);
+ buff[5] = bin2bcd(tm->tm_mon + 1); /* system set 0-11 */
+ buff[6] = bin2bcd(tm->tm_year - cent_flag * 100);
+
+ if (cent_flag)
+ buff[5] |= MONTH_CENTFLAG;
+
+ err = regmap_bulk_write(rtc->rn5t618->regmap, RN5T618_RTC_SECONDS,
+ buff, sizeof(buff));
+ if (err < 0) {
+ dev_err(dev, "failed to program new time: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+/* 0-disable, 1-enable */
+static int rc5t619_rtc_alarm_enable(struct device *dev, unsigned int enabled)
+{
+ struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+
+ return regmap_update_bits(rtc->rn5t618->regmap,
+ RN5T618_RTC_CTRL1,
+ CTRL1_ALARM_ENABLED,
+ enabled ? CTRL1_ALARM_ENABLED : 0);
+}
+
+static int rc5t619_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+ u8 buff[6];
+ unsigned int buff_cent;
+ int err;
+ int cent_flag;
+ unsigned int ctrl1;
+
+ err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL1, &ctrl1);
+ if (err)
+ return err;
+
+ err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_MONTH, &buff_cent);
+ if (err < 0) {
+ dev_err(dev, "failed to read time: %d\n", err);
+ return err;
+ }
+
+ if (buff_cent & MONTH_CENTFLAG)
+ cent_flag = 1;
+ else
+ cent_flag = 0;
+
+ err = regmap_bulk_read(rtc->rn5t618->regmap, RN5T618_RTC_ALARM_Y_SEC,
+ buff, sizeof(buff));
+ if (err)
+ return err;
+
+ buff[3] = buff[3] & 0x3f;
+
+ alrm->time.tm_sec = bcd2bin(buff[0]);
+ alrm->time.tm_min = bcd2bin(buff[1]);
+
+ if (ctrl1 & CTRL1_24HR)
+ alrm->time.tm_hour = bcd2bin(buff[2]);
+ else
+ alrm->time.tm_hour = rtc5t619_12hour_bcd2bin(buff[2]);
+
+ alrm->time.tm_mday = bcd2bin(buff[3]);
+ alrm->time.tm_mon = bcd2bin(buff[4]) - 1;
+ alrm->time.tm_year = bcd2bin(buff[5]) + 100 * cent_flag;
+ alrm->enabled = !!(ctrl1 & CTRL1_ALARM_ENABLED);
+ dev_dbg(dev, "read alarm: %ptR\n", &alrm->time);
+
+ return 0;
+}
+
+static int rc5t619_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+ u8 buff[6];
+ int err;
+ int cent_flag;
+ unsigned int ctrl1;
+
+ err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL1, &ctrl1);
+ if (err)
+ return err;
+
+ err = rc5t619_rtc_alarm_enable(dev, 0);
+ if (err < 0)
+ return err;
+
+ if (rtc->irq == -1)
+ return -EINVAL;
+
+ if (alrm->enabled == 0)
+ return 0;
+
+ if (alrm->time.tm_year >= 100)
+ cent_flag = 1;
+ else
+ cent_flag = 0;
+
+ alrm->time.tm_mon += 1;
+ buff[0] = bin2bcd(alrm->time.tm_sec);
+ buff[1] = bin2bcd(alrm->time.tm_min);
+
+ if (ctrl1 & CTRL1_24HR)
+ buff[2] = bin2bcd(alrm->time.tm_hour);
+ else
+ buff[2] = rtc5t619_12hour_bin2bcd(alrm->time.tm_hour);
+
+ buff[3] = bin2bcd(alrm->time.tm_mday);
+ buff[4] = bin2bcd(alrm->time.tm_mon);
+ buff[5] = bin2bcd(alrm->time.tm_year - 100 * cent_flag);
+ buff[3] |= MDAY_DAL_EXT;
+
+ err = regmap_bulk_write(rtc->rn5t618->regmap, RN5T618_RTC_ALARM_Y_SEC,
+ buff, sizeof(buff));
+ if (err < 0)
+ return err;
+
+ return rc5t619_rtc_alarm_enable(dev, alrm->enabled);
+}
+
+static const struct rtc_class_ops rc5t619_rtc_ops = {
+ .read_time = rc5t619_rtc_read_time,
+ .set_time = rc5t619_rtc_set_time,
+ .set_alarm = rc5t619_rtc_set_alarm,
+ .read_alarm = rc5t619_rtc_read_alarm,
+ .alarm_irq_enable = rc5t619_rtc_alarm_enable,
+};
+
+static int rc5t619_rtc_alarm_flag_clr(struct device *dev)
+{
+ struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+
+ /* clear alarm-D status bits.*/
+ return regmap_update_bits(rtc->rn5t618->regmap,
+ RN5T618_RTC_CTRL2,
+ CTRL2_ALARM_STATUS | CTRL2_CTC, 0);
+}
+
+static irqreturn_t rc5t619_rtc_irq(int irq, void *data)
+{
+ struct device *dev = data;
+ struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+
+ rc5t619_rtc_alarm_flag_clr(dev);
+
+ rtc_update_irq(rtc->rtc, 1, RTC_IRQF | RTC_AF);
+ return IRQ_HANDLED;
+}
+
+static int rc5t619_rtc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct rn5t618 *rn5t618 = dev_get_drvdata(pdev->dev.parent);
+ struct rc5t619_rtc *rtc;
+ unsigned int ctrl2;
+ int err;
+
+ rtc = devm_kzalloc(dev, sizeof(*rtc), GFP_KERNEL);
+ if (IS_ERR(rtc)) {
+ err = PTR_ERR(rtc);
+ return -ENOMEM;
+ }
+
+ rtc->rn5t618 = rn5t618;
+
+ dev_set_drvdata(dev, rtc);
+ rtc->irq = -1;
+
+ if (rn5t618->irq_data)
+ rtc->irq = regmap_irq_get_virq(rn5t618->irq_data,
+ RN5T618_IRQ_RTC);
+
+ if (rtc->irq < 0)
+ rtc->irq = -1;
+
+ err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL2, &ctrl2);
+ if (err < 0)
+ return err;
+
+ /* disable rtc periodic function */
+ err = rc5t619_rtc_periodic_disable(&pdev->dev);
+ if (err)
+ return err;
+
+ if (ctrl2 & CTRL2_PON) {
+ err = rc5t619_rtc_alarm_flag_clr(&pdev->dev);
+ if (err)
+ return err;
+ }
+
+ rtc->rtc = devm_rtc_allocate_device(&pdev->dev);
+ if (IS_ERR(rtc->rtc)) {
+ err = PTR_ERR(rtc->rtc);
+ dev_err(dev, "RTC device register: err %d\n", err);
+ return err;
+ }
+
+ rtc->rtc->ops = &rc5t619_rtc_ops;
+ rtc->rtc->range_min = RTC_TIMESTAMP_BEGIN_1900;
+ rtc->rtc->range_max = RTC_TIMESTAMP_END_2099;
+
+ /* set interrupt and enable it */
+ if (rtc->irq != -1) {
+ err = devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL,
+ rc5t619_rtc_irq,
+ IRQF_ONESHOT,
+ "rtc-rc5t619",
+ &pdev->dev);
+ if (err < 0) {
+ dev_err(&pdev->dev, "request IRQ:%d fail\n", rtc->irq);
+ rtc->irq = -1;
+
+ err = rc5t619_rtc_alarm_enable(&pdev->dev, 0);
+ if (err)
+ return err;
+
+ } else {
+ /* enable wake */
+ device_init_wakeup(&pdev->dev, 1);
+ enable_irq_wake(rtc->irq);
+ }
+ } else {
+ /* system don't want to using alarm interrupt, so close it */
+ err = rc5t619_rtc_alarm_enable(&pdev->dev, 0);
+ if (err)
+ return err;
+
+ dev_warn(&pdev->dev, "rc5t619 interrupt is disabled\n");
+ }
+
+ return rtc_register_device(rtc->rtc);
+}
+
+static struct platform_driver rc5t619_rtc_driver = {
+ .driver = {
+ .name = "rc5t619-rtc",
+ },
+ .probe = rc5t619_rtc_probe,
+};
+
+module_platform_driver(rc5t619_rtc_driver);
+MODULE_ALIAS("platform:rc5t619-rtc");
+MODULE_DESCRIPTION("RICOH RC5T619 RTC driver");
+MODULE_LICENSE("GPL");
--
2.11.0