2020-02-27 01:27:34

by Ondřej Jirman

Subject: [PATCH v2 3/3] arm64: dts: allwinner: Add initial support for Pine64 PinePhone

At the moment PinePhone comes in two slightly incompatible variants:

- 1.0: Early Developer Batch
- 1.1: Braveheart Batch

There will be at least one more incompatible variant in the very near
future, so let's start by sharing the dtsi among multiple variants,
right away, even though the HW description doesn't yet include the
different bits.

The differences between 1.0 and 1.1 are: change in pins that control
the flash LED, differences in modem power status signal routing, and
maybe some other subtler things, that have not been determined yet.

This is a basic DT that includes only features that are already
supported by mainline drivers.

Co-developed-by: Samuel Holland <[email protected]>
Signed-off-by: Samuel Holland <[email protected]>
Co-developed-by: Martijn Braam <[email protected]>
Signed-off-by: Martijn Braam <[email protected]>
Co-developed-by: Luca Weiss <[email protected]>
Signed-off-by: Luca Weiss <[email protected]>
Signed-off-by: Bhushan Shah <[email protected]>
Signed-off-by: Icenowy Zheng <[email protected]>
Signed-off-by: Ondrej Jirman <[email protected]>
---
arch/arm64/boot/dts/allwinner/Makefile | 2 +
.../allwinner/sun50i-a64-pinephone-1.0.dts | 11 +
.../allwinner/sun50i-a64-pinephone-1.1.dts | 11 +
.../dts/allwinner/sun50i-a64-pinephone.dtsi | 379 ++++++++++++++++++
4 files changed, 403 insertions(+)
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi

diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 6dad63881cd3a..e4d3cd0ac5bb7 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -9,6 +9,8 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-lts.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinebook.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.0.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.1.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts
new file mode 100644
index 0000000000000..0c42272106afa
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Ondrej Jirman <[email protected]>
+
+/dts-v1/;
+
+#include "sun50i-a64-pinephone.dtsi"
+
+/ {
+ model = "Pine64 PinePhone Developer Batch (1.0)";
+ compatible = "pine64,pinephone-1.0", "allwinner,sun50i-a64";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
new file mode 100644
index 0000000000000..06a775c41664b
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Ondrej Jirman <[email protected]>
+
+/dts-v1/;
+
+#include "sun50i-a64-pinephone.dtsi"
+
+/ {
+ model = "Pine64 PinePhone Braveheart (1.1)";
+ compatible = "pine64,pinephone-1.1", "allwinner,sun50i-a64";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
new file mode 100644
index 0000000000000..cefda145c3c9d
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
@@ -0,0 +1,379 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Icenowy Zheng <[email protected]>
+// Copyright (C) 2020 Martijn Braam <[email protected]>
+// Copyright (C) 2020 Ondrej Jirman <[email protected]>
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ blue {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_BLUE>;
+ gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
+ };
+
+ green {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */
+ };
+
+ red {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
+ };
+ };
+
+ speaker_amp: audio-amplifier {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */
+ sound-name-prefix = "Speaker Amp";
+ };
+
+ vibrator {
+ compatible = "gpio-vibrator";
+ enable-gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
+ vcc-supply = <&reg_dcdc1>;
+ };
+};
+
+&codec {
+ status = "okay";
+};
+
+&codec_analog {
+ cpvdd-supply = <&reg_eldo1>;
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&dai {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ /* Magnetometer */
+ lis3mdl@1e {
+ compatible = "st,lis3mdl-magn";
+ reg = <0x1e>;
+ vdd-supply = <&reg_dldo1>;
+ vddio-supply = <&reg_dldo1>;
+ };
+
+ /* Accelerometer/gyroscope */
+ mpu6050@68 {
+ compatible = "invensense,mpu6050";
+ reg = <0x68>;
+ interrupt-parent = <&pio>;
+ interrupts = <7 5 IRQ_TYPE_EDGE_RISING>; /* PH5 */
+ vdd-supply = <&reg_dldo1>;
+ vddio-supply = <&reg_dldo1>;
+ };
+};
+
+/* Connected to pogo pins (external spring based pinheader for user addons) */
+&i2c2 {
+ status = "okay";
+};
+
+&lradc {
+ vref-supply = <&reg_aldo3>;
+ status = "okay";
+
+ button-200 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <200000>;
+ };
+
+ button-400 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <400000>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <&reg_dcdc1>;
+ vqmmc-supply = <&reg_dcdc1>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ disable-wp;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&reg_dcdc1>;
+ vqmmc-supply = <&reg_dcdc1>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ vcc-pb-supply = <&reg_dcdc1>;
+ vcc-pc-supply = <&reg_dcdc1>;
+ vcc-pd-supply = <&reg_dcdc1>;
+ vcc-pe-supply = <&reg_aldo1>;
+ vcc-pf-supply = <&reg_dcdc1>;
+ vcc-pg-supply = <&reg_dldo4>;
+ vcc-ph-supply = <&reg_dcdc1>;
+};
+
+&r_pio {
+ /*
+ * FIXME: We can't add that supply for now since it would
+ * create a circular dependency between pinctrl, the regulator
+ * and the RSB Bus.
+ *
+ * vcc-pl-supply = <&reg_aldo2>;
+ */
+};
+
+&r_rsb {
+ status = "okay";
+
+ axp803: pmic@3a3 {
+ compatible = "x-powers,axp803";
+ reg = <0x3a3>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+&battery_power_supply {
+ status = "okay";
+};
+
+&reg_aldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "dovdd-csi";
+};
+
+&reg_aldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-dsi-sensor";
+};
+
+&reg_dldo2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-mipi-io";
+};
+
+&reg_dldo3 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "avdd-csi";
+};
+
+&reg_dldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-io";
+};
+
+&reg_eldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-lpddr";
+};
+
+&reg_eldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "dvdd-1v8-csi";
+};
+
+&reg_fldo1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vcc-1v2-hsic";
+};
+
+&reg_fldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpus";
+};
+
+&reg_ldo_io0 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-lcd-ctp-stk";
+ status = "okay";
+};
+
+&reg_ldo_io1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-1v8-typec";
+ status = "okay";
+};
+
+&reg_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&sound {
+ status = "okay";
+ simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
+ simple-audio-card,widgets = "Microphone", "Headset Microphone",
+ "Microphone", "Internal Microphone",
+ "Headphone", "Headphone Jack",
+ "Speaker", "Internal Earpiece",
+ "Speaker", "Internal Speaker";
+ simple-audio-card,routing =
+ "Headphone Jack", "HP",
+ "Internal Earpiece", "EARPIECE",
+ "Internal Speaker", "Speaker Amp OUTL",
+ "Internal Speaker", "Speaker Amp OUTR",
+ "Speaker Amp INL", "LINEOUT",
+ "Speaker Amp INR", "LINEOUT",
+ "Left DAC", "AIF1 Slot 0 Left",
+ "Right DAC", "AIF1 Slot 0 Right",
+ "AIF1 Slot 0 Left ADC", "Left ADC",
+ "AIF1 Slot 0 Right ADC", "Right ADC",
+ "Internal Microphone", "MBIAS",
+ "MIC1", "Internal Microphone",
+ "Headset Microphone", "HBIAS",
+ "MIC2", "Headset Microphone";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pb_pins>;
+ status = "okay";
+};
+
+/* Connected to the modem (hardware flow control can't be used) */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usb_power_supply {
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
--
2.25.1