In a recent change to the SPI subsystem [1], a new `delay` struct was added
to replace the `delay_usecs`. This change replaces the current
`delay_usecs` with `delay` for this driver.
The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure
that both `delay_usecs` & `delay` are used (in this order to preserve
backwards compatibility).
[1] commit bebcfd272df6 ("spi: introduce `delay` field for
`spi_transfer` + spi_transfer_delay_exec()")
Signed-off-by: Sergiu Cuciurean <[email protected]>
---
drivers/iio/imu/adis_buffer.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/iio/imu/adis_buffer.c b/drivers/iio/imu/adis_buffer.c
index 3f4dd5c00b03..04e5e2a0fd6b 100644
--- a/drivers/iio/imu/adis_buffer.c
+++ b/drivers/iio/imu/adis_buffer.c
@@ -97,7 +97,8 @@ int adis_update_scan_mode(struct iio_dev *indio_dev,
if (j != scan_count)
adis->xfer[j].cs_change = 1;
adis->xfer[j].len = 2;
- adis->xfer[j].delay_usecs = adis->data->read_delay;
+ adis->xfer[j].delay.value = adis->data->read_delay;
+ adis->xfer[j].delay.unit = SPI_DELAY_UNIT_USECS;
if (j < scan_count)
adis->xfer[j].tx_buf = &tx[j];
if (j >= 1)
--
2.17.1
On Thu, 27 Feb 2020 14:38:59 +0200
Sergiu Cuciurean <[email protected]> wrote:
> In a recent change to the SPI subsystem [1], a new `delay` struct was added
> to replace the `delay_usecs`. This change replaces the current
> `delay_usecs` with `delay` for this driver.
>
> The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure
> that both `delay_usecs` & `delay` are used (in this order to preserve
> backwards compatibility).
>
> [1] commit bebcfd272df6 ("spi: introduce `delay` field for
> `spi_transfer` + spi_transfer_delay_exec()")
>
> Signed-off-by: Sergiu Cuciurean <[email protected]>
Applied.
Thanks,
Jonathan
> ---
> drivers/iio/imu/adis_buffer.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/iio/imu/adis_buffer.c b/drivers/iio/imu/adis_buffer.c
> index 3f4dd5c00b03..04e5e2a0fd6b 100644
> --- a/drivers/iio/imu/adis_buffer.c
> +++ b/drivers/iio/imu/adis_buffer.c
> @@ -97,7 +97,8 @@ int adis_update_scan_mode(struct iio_dev *indio_dev,
> if (j != scan_count)
> adis->xfer[j].cs_change = 1;
> adis->xfer[j].len = 2;
> - adis->xfer[j].delay_usecs = adis->data->read_delay;
> + adis->xfer[j].delay.value = adis->data->read_delay;
> + adis->xfer[j].delay.unit = SPI_DELAY_UNIT_USECS;
> if (j < scan_count)
> adis->xfer[j].tx_buf = &tx[j];
> if (j >= 1)