2020-02-28 15:55:13

by Johan Jonker

[permalink] [raw]
Subject: [PATCH 1/3] ARM: dts: rockchip: add sram to bus_intmem nodename for rv1108

A test with the command below gives these errors:

arch/arm/boot/dts/rv1108-elgin-r1.dt.yaml:
bus_intmem@10080000: $nodename:0: 'bus_intmem@10080000'
does not match '^sram(@.*)?'
arch/arm/boot/dts/rv1108-evb.dt.yaml:
bus_intmem@10080000: $nodename:0: 'bus_intmem@10080000'
does not match '^sram(@.*)?'

Fix this error by adding sram to the bus_intmem nodename
in rv1108.dtsi.

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/sram/sram.yaml

Signed-off-by: Johan Jonker <[email protected]>
---
arch/arm/boot/dts/rv1108.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi
index 9bb109d66..c3621b3e6 100644
--- a/arch/arm/boot/dts/rv1108.dtsi
+++ b/arch/arm/boot/dts/rv1108.dtsi
@@ -102,7 +102,7 @@
};
};

- bus_intmem@10080000 {
+ bus_intmem: sram@10080000 {
compatible = "mmio-sram";
reg = <0x10080000 0x2000>;
#address-cells = <1>;
--
2.11.0


2020-02-28 15:55:40

by Johan Jonker

[permalink] [raw]
Subject: [PATCH 3/3] ARM: dts: rockchip: add sram to bus_intmem nodename for rk3288

A test with the command below gives for example these errors:

arch/arm/boot/dts/rk3288-evb-act8846.dt.yaml:
bus_intmem@ff700000: $nodename:0: 'bus_intmem@ff700000'
does not match '^sram(@.*)?'
arch/arm/boot/dts/rk3288-evb-rk808.dt.yaml:
bus_intmem@ff700000: $nodename:0: 'bus_intmem@ff700000'
does not match '^sram(@.*)?'

'rockchip-pmu-sram.txt' inherit properties from 'sram.yaml'.
Fix this error by adding 'sram' to the bus_intmem nodename
in 'rk3288.dtsi'. But 'sram' is also a node name already in use.
To prevent confusion rename it to 'pmu_sram'.

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/sram/sram.yaml

Signed-off-by: Johan Jonker <[email protected]>
---
arch/arm/boot/dts/rk3288.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 9beb66216..039e8aa70 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -718,7 +718,7 @@
status = "disabled";
};

- bus_intmem@ff700000 {
+ bus_intmem: sram@ff700000 {
compatible = "mmio-sram";
reg = <0x0 0xff700000 0x0 0x18000>;
#address-cells = <1>;
@@ -730,7 +730,7 @@
};
};

- sram@ff720000 {
+ pmu_sram: sram@ff720000 {
compatible = "rockchip,rk3288-pmu-sram", "mmio-sram";
reg = <0x0 0xff720000 0x0 0x1000>;
};
--
2.11.0

2020-02-29 23:51:17

by Heiko Stuebner

[permalink] [raw]
Subject: Re: [PATCH 1/3] ARM: dts: rockchip: add sram to bus_intmem nodename for rv1108

Am Freitag, 28. Februar 2020, 16:53:52 CET schrieb Johan Jonker:
> A test with the command below gives these errors:
>
> arch/arm/boot/dts/rv1108-elgin-r1.dt.yaml:
> bus_intmem@10080000: $nodename:0: 'bus_intmem@10080000'
> does not match '^sram(@.*)?'
> arch/arm/boot/dts/rv1108-evb.dt.yaml:
> bus_intmem@10080000: $nodename:0: 'bus_intmem@10080000'
> does not match '^sram(@.*)?'
>
> Fix this error by adding sram to the bus_intmem nodename
> in rv1108.dtsi.
>
> make ARCH=arm dtbs_check
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/sram/sram.yaml
>
> Signed-off-by: Johan Jonker <[email protected]>

applied all 3 patches for 5.7

Thanks
Heiko