request_irq() is preferred over setup_irq(). Invocations of setup_irq()
occur after memory allocators are ready.
Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.
Hence replace setup_irq() by request_irq().
[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos
Signed-off-by: afzal mohammed <[email protected]>
---
Hi sub-arch maintainers,
If the patch is okay, please take it thr' your tree.
Regards
afzal
v3:
* Split out from series, also split out from ARM patch to subarch level
as Thomas suggested to take it thr' respective maintainers
* Modify string displayed in case of error as suggested by Thomas
* Re-arrange code as required to improve readability
* Remove irrelevant parts from commit message & improve
v2:
* Replace pr_err("request_irq() on %s failed" by
pr_err("%s: request_irq() failed"
* Commit message massage
arch/arm/mach-ebsa110/core.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index da2ff4f61d6b..575b2e2b6759 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -201,17 +201,13 @@ ebsa110_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction ebsa110_timer_irq = {
- .name = "EBSA110 Timer Tick",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = ebsa110_timer_interrupt,
-};
-
/*
* Set up timer interrupt.
*/
void __init ebsa110_timer_init(void)
{
+ int irq = IRQ_EBSA110_TIMER0;
+
arch_gettimeoffset = ebsa110_gettimeoffset;
/*
@@ -221,7 +217,9 @@ void __init ebsa110_timer_init(void)
__raw_writeb(COUNT & 0xff, PIT_T1);
__raw_writeb(COUNT >> 8, PIT_T1);
- setup_irq(IRQ_EBSA110_TIMER0, &ebsa110_timer_irq);
+ if (request_irq(irq, ebsa110_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+ "EBSA110 Timer Tick", NULL))
+ pr_err("Failed to request irq %d (EBSA110 Timer Tick)\n", irq);
}
static struct plat_serial8250_port serial_platform_data[] = {
--
2.25.1