## TL;DR
This patchset adds a centralized executor to dispatch tests rather than
relying on late_initcall to schedule each test suite separately along
with a couple of new features that depend on it.
Also, sorry for the delay in getting this new revision out. I have been
really busy for the past couple weeks.
## What am I trying to do?
Conceptually, I am trying to provide a mechanism by which test suites
can be grouped together so that they can be reasoned about collectively.
The last two of three patches in this series add features which depend
on this:
PATCH 5/7 Prints out a test plan[1] right before KUnit tests are run;
this is valuable because it makes it possible for a test
harness to detect whether the number of tests run matches the
number of tests expected to be run, ensuring that no tests
silently failed. The test plan includes a count of tests that
will run. With the centralized executor, the tests are located
in a single data structure and thus can be counted.
PATCH 6/7 Add a new kernel command-line option which allows the user to
specify that the kernel poweroff, halt, or reboot after
completing all KUnit tests; this is very handy for running
KUnit tests on UML or a VM so that the UML/VM process exits
cleanly immediately after running all tests without needing a
special initramfs. The centralized executor provides a
definitive point when all tests have completed and the
poweroff, halt, or reboot could occur.
In addition, by dispatching tests from a single location, we can
guarantee that all KUnit tests run after late_init is complete, which
was a concern during the initial KUnit patchset review (this has not
been a problem in practice, but resolving with certainty is nevertheless
desirable).
Other use cases for this exist, but the above features should provide an
idea of the value that this could provide.
## Changes since last revision:
- On patch 7/7, I added some additional wording around the
kunit_shutdown command line option explaining that it runs after
built-in tests as suggested by Frank.
- On the coverletter, I improved some wording and added a missing link.
I also specified the base-commit for the series.
- Frank asked for some changes to the documentation; however, David is
taking care of that in a separate patch[2], so I did not make those
changes here. There will be some additional changes necessary
after David's patch is applied.
Alan Maguire (1):
kunit: test: create a single centralized executor for all tests
Brendan Higgins (5):
vmlinux.lds.h: add linker section for KUnit test suites
arch: um: add linker section for KUnit test suites
init: main: add KUnit to kernel init
kunit: test: add test plan to KUnit TAP format
Documentation: Add kunit_shutdown to kernel-parameters.txt
David Gow (1):
kunit: Add 'kunit_shutdown' option
.../admin-guide/kernel-parameters.txt | 8 ++
arch/um/include/asm/common.lds.S | 4 +
include/asm-generic/vmlinux.lds.h | 8 ++
include/kunit/test.h | 82 ++++++++++++-------
init/main.c | 4 +
lib/kunit/Makefile | 3 +-
lib/kunit/executor.c | 71 ++++++++++++++++
lib/kunit/test.c | 11 ---
tools/testing/kunit/kunit_kernel.py | 2 +-
tools/testing/kunit/kunit_parser.py | 76 ++++++++++++++---
.../test_is_test_passed-all_passed.log | 1 +
.../test_data/test_is_test_passed-crash.log | 1 +
.../test_data/test_is_test_passed-failure.log | 1 +
13 files changed, 218 insertions(+), 54 deletions(-)
create mode 100644 lib/kunit/executor.c
base-commit: a2f0b878c3ca531a1706cb2a8b079cea3b17bafc
[1] https://github.com/isaacs/testanything.github.io/blob/tap14/tap-version-14-specification.md#the-plan
[2] https://patchwork.kernel.org/patch/11383635/
--
2.25.1.481.gfbce0eb801-goog
On 2/27/20 7:20 PM, Brendan Higgins wrote:
> ## TL;DR
>
> This patchset adds a centralized executor to dispatch tests rather than
> relying on late_initcall to schedule each test suite separately along
> with a couple of new features that depend on it.
>
> Also, sorry for the delay in getting this new revision out. I have been
> really busy for the past couple weeks.
>
> ## What am I trying to do?
>
> Conceptually, I am trying to provide a mechanism by which test suites
> can be grouped together so that they can be reasoned about collectively.
> The last two of three patches in this series add features which depend
> on this:
>
> PATCH 5/7 Prints out a test plan[1] right before KUnit tests are run;
> this is valuable because it makes it possible for a test
> harness to detect whether the number of tests run matches the
> number of tests expected to be run, ensuring that no tests
> silently failed. The test plan includes a count of tests that
> will run. With the centralized executor, the tests are located
> in a single data structure and thus can be counted.
>
> PATCH 6/7 Add a new kernel command-line option which allows the user to
> specify that the kernel poweroff, halt, or reboot after
> completing all KUnit tests; this is very handy for running
> KUnit tests on UML or a VM so that the UML/VM process exits
> cleanly immediately after running all tests without needing a
> special initramfs. The centralized executor provides a
> definitive point when all tests have completed and the
> poweroff, halt, or reboot could occur.
>
> In addition, by dispatching tests from a single location, we can
> guarantee that all KUnit tests run after late_init is complete, which
> was a concern during the initial KUnit patchset review (this has not
> been a problem in practice, but resolving with certainty is nevertheless
> desirable).
>
> Other use cases for this exist, but the above features should provide an
> idea of the value that this could provide.
>
> ## Changes since last revision:
> - On patch 7/7, I added some additional wording around the
> kunit_shutdown command line option explaining that it runs after
> built-in tests as suggested by Frank.
> - On the coverletter, I improved some wording and added a missing link.
> I also specified the base-commit for the series.
> - Frank asked for some changes to the documentation; however, David is
> taking care of that in a separate patch[2], so I did not make those
> changes here. There will be some additional changes necessary
> after David's patch is applied.
Making the documentation changes after David's patches sounds like
a good plan to me.
-Frank
>
> Alan Maguire (1):
> kunit: test: create a single centralized executor for all tests
>
> Brendan Higgins (5):
> vmlinux.lds.h: add linker section for KUnit test suites
> arch: um: add linker section for KUnit test suites
> init: main: add KUnit to kernel init
> kunit: test: add test plan to KUnit TAP format
> Documentation: Add kunit_shutdown to kernel-parameters.txt
>
> David Gow (1):
> kunit: Add 'kunit_shutdown' option
>
> .../admin-guide/kernel-parameters.txt | 8 ++
> arch/um/include/asm/common.lds.S | 4 +
> include/asm-generic/vmlinux.lds.h | 8 ++
> include/kunit/test.h | 82 ++++++++++++-------
> init/main.c | 4 +
> lib/kunit/Makefile | 3 +-
> lib/kunit/executor.c | 71 ++++++++++++++++
> lib/kunit/test.c | 11 ---
> tools/testing/kunit/kunit_kernel.py | 2 +-
> tools/testing/kunit/kunit_parser.py | 76 ++++++++++++++---
> .../test_is_test_passed-all_passed.log | 1 +
> .../test_data/test_is_test_passed-crash.log | 1 +
> .../test_data/test_is_test_passed-failure.log | 1 +
> 13 files changed, 218 insertions(+), 54 deletions(-)
> create mode 100644 lib/kunit/executor.c
>
>
> base-commit: a2f0b878c3ca531a1706cb2a8b079cea3b17bafc
>
> [1] https://github.com/isaacs/testanything.github.io/blob/tap14/tap-version-14-specification.md#the-plan
> [2] https://patchwork.kernel.org/patch/11383635/
>
Guenter,
are you still running your cross-architecture tests? If so any chance
you can try this for your build tests?
Brendan, do you have this code in a branch which can be merged into
linux-next by any chance?
Luis
On Mon, Mar 02, 2020 at 08:03:37PM +0000, Luis Chamberlain wrote:
> Guenter,
>
> are you still running your cross-architecture tests? If so any chance
Yes
> you can try this for your build tests?
>
I didn't have KUNIT_TEST enabled to start with. I did that now, and
started a test run on mainline a minute ago. We'll see how that goes.
Afterwards, sure, I can run the series in a test branch. It would be great
if I can pick it up from a repository somewhere.
Guenter
On Mon, Mar 2, 2020 at 1:16 PM Guenter Roeck <[email protected]> wrote:
>
> On Mon, Mar 02, 2020 at 08:03:37PM +0000, Luis Chamberlain wrote:
> > Guenter,
> >
> > are you still running your cross-architecture tests? If so any chance
>
> Yes
>
> > you can try this for your build tests?
> >
>
> I didn't have KUNIT_TEST enabled to start with. I did that now, and
> started a test run on mainline a minute ago. We'll see how that goes.
FYI, kbuild already found some architectures for which this change doesn't work.
So far, I need to fix:
- arm64 (32 bit seems to work fine)
- i386 in some cases.
> Afterwards, sure, I can run the series in a test branch. It would be great
> if I can pick it up from a repository somewhere.
Cool, I will post my next revision to a branch somewhere.
Thanks!