From: Kai Vehmanen <[email protected]>
[ Upstream commit 43bcb1c0507858cdc95e425017dcc33f8105df39 ]
snd_hdac_ext_bus_link_get() does not work correctly in case
there are multiple codecs on the bus. It unconditionally
resets the bus->codec_mask value. As per documentation in
hdaudio.h and existing use in client code, this field should
be used to store bit flag of detected codecs on the bus.
By overwriting value of the codec_mask, information on all
detected codecs is lost. No current user of hdac is impacted,
but use of bus->codec_mask is planned in future patches
for SOF.
Signed-off-by: Kai Vehmanen <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/hda/ext/hdac_ext_controller.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/sound/hda/ext/hdac_ext_controller.c b/sound/hda/ext/hdac_ext_controller.c
index cfab60d88c921..09ff209df4a30 100644
--- a/sound/hda/ext/hdac_ext_controller.c
+++ b/sound/hda/ext/hdac_ext_controller.c
@@ -254,6 +254,7 @@ EXPORT_SYMBOL_GPL(snd_hdac_ext_bus_link_power_down_all);
int snd_hdac_ext_bus_link_get(struct hdac_bus *bus,
struct hdac_ext_link *link)
{
+ unsigned long codec_mask;
int ret = 0;
mutex_lock(&bus->lock);
@@ -280,9 +281,11 @@ int snd_hdac_ext_bus_link_get(struct hdac_bus *bus,
* HDA spec section 4.3 - Codec Discovery
*/
udelay(521);
- bus->codec_mask = snd_hdac_chip_readw(bus, STATESTS);
- dev_dbg(bus->dev, "codec_mask = 0x%lx\n", bus->codec_mask);
- snd_hdac_chip_writew(bus, STATESTS, bus->codec_mask);
+ codec_mask = snd_hdac_chip_readw(bus, STATESTS);
+ dev_dbg(bus->dev, "codec_mask = 0x%lx\n", codec_mask);
+ snd_hdac_chip_writew(bus, STATESTS, codec_mask);
+ if (!bus->codec_mask)
+ bus->codec_mask = codec_mask;
}
mutex_unlock(&bus->lock);
--
2.20.1
From: Nikita Sobolev <[email protected]>
[ Upstream commit b32694cd0724d4ceca2c62cc7c3d3a8d1ffa11fc ]
tpm2 tests set fails if there is no /dev/tpm0 and /dev/tpmrm0
supported. Check if these files exist before run and mark test as
skipped in case of absence.
Signed-off-by: Nikita Sobolev <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/tpm2/test_smoke.sh | 13 +++++++++++--
tools/testing/selftests/tpm2/test_space.sh | 9 ++++++++-
2 files changed, 19 insertions(+), 3 deletions(-)
diff --git a/tools/testing/selftests/tpm2/test_smoke.sh b/tools/testing/selftests/tpm2/test_smoke.sh
index 8155c2ea7ccbb..b630c7b5950a9 100755
--- a/tools/testing/selftests/tpm2/test_smoke.sh
+++ b/tools/testing/selftests/tpm2/test_smoke.sh
@@ -1,8 +1,17 @@
#!/bin/bash
# SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+self.flags = flags
-python -m unittest -v tpm2_tests.SmokeTest
-python -m unittest -v tpm2_tests.AsyncTest
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+
+if [ -f /dev/tpm0 ] ; then
+ python -m unittest -v tpm2_tests.SmokeTest
+ python -m unittest -v tpm2_tests.AsyncTest
+else
+ exit $ksft_skip
+fi
CLEAR_CMD=$(which tpm2_clear)
if [ -n $CLEAR_CMD ]; then
diff --git a/tools/testing/selftests/tpm2/test_space.sh b/tools/testing/selftests/tpm2/test_space.sh
index a6f5e346635e5..180b469c53b47 100755
--- a/tools/testing/selftests/tpm2/test_space.sh
+++ b/tools/testing/selftests/tpm2/test_space.sh
@@ -1,4 +1,11 @@
#!/bin/bash
# SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
-python -m unittest -v tpm2_tests.SpaceTest
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+if [ -f /dev/tpmrm0 ] ; then
+ python -m unittest -v tpm2_tests.SpaceTest
+else
+ exit $ksft_skip
+fi
--
2.20.1
From: Hangbin Liu <[email protected]>
[ Upstream commit 4e867c9a50ff1a07ed0b86c3b1c8bc773933d728 ]
After commit 71130f29979c ("vxlan: fix tos value before xmit") we start
strict vxlan xmit tos value by RT_TOS(), which limits the tos value less
than 0x1E. With current value 0x40 the test will failed with "v1: Expected
to capture 10 packets, got 0". So let's choose a smaller tos value for
testing.
Fixes: d417ecf533fe ("selftests: forwarding: vxlan_bridge_1d: Add a TOS test")
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/net/forwarding/vxlan_bridge_1d.sh | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/tools/testing/selftests/net/forwarding/vxlan_bridge_1d.sh b/tools/testing/selftests/net/forwarding/vxlan_bridge_1d.sh
index bb10e33690b25..353613fc19475 100755
--- a/tools/testing/selftests/net/forwarding/vxlan_bridge_1d.sh
+++ b/tools/testing/selftests/net/forwarding/vxlan_bridge_1d.sh
@@ -516,9 +516,9 @@ test_tos()
RET=0
tc filter add dev v1 egress pref 77 prot ip \
- flower ip_tos 0x40 action pass
- vxlan_ping_test $h1 192.0.2.3 "-Q 0x40" v1 egress 77 10
- vxlan_ping_test $h1 192.0.2.3 "-Q 0x30" v1 egress 77 0
+ flower ip_tos 0x11 action pass
+ vxlan_ping_test $h1 192.0.2.3 "-Q 0x11" v1 egress 77 10
+ vxlan_ping_test $h1 192.0.2.3 "-Q 0x12" v1 egress 77 0
tc filter del dev v1 egress pref 77 prot ip
log_test "VXLAN: envelope TOS inheritance"
--
2.20.1
From: Tomas Henzl <[email protected]>
[ Upstream commit 0e99b2c625da181aebf1a3d13493e3f7a5057a9c ]
Add a flag to DMA memory allocation to silence a warning.
This driver allocates DMA memory for IO frames. This allocation may exceed
MAX_ORDER pages for few megaraid_sas controllers (controllers with very
high queue depth). Consequently, the driver has logic to keep reducing the
controller queue depth until the DMA memory allocation succeeds.
On impacted megaraid_sas controllers there would be multiple DMA allocation
failures until driver settled on an allocation that fit. These failed DMA
allocation requests caused stack traces in system logs. These were not
harmful and this patch silences those warnings/stack traces.
[mkp: clarified commit desc]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Tomas Henzl <[email protected]>
Acked-by: Sumit Saxena <[email protected]>
Reviewed-by: Lee Duncan <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/megaraid/megaraid_sas_fusion.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c
index 46bc062d873ef..d868388018053 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
@@ -594,7 +594,8 @@ megasas_alloc_request_fusion(struct megasas_instance *instance)
fusion->io_request_frames =
dma_pool_alloc(fusion->io_request_frames_pool,
- GFP_KERNEL, &fusion->io_request_frames_phys);
+ GFP_KERNEL | __GFP_NOWARN,
+ &fusion->io_request_frames_phys);
if (!fusion->io_request_frames) {
if (instance->max_fw_cmds >= (MEGASAS_REDUCE_QD_COUNT * 2)) {
instance->max_fw_cmds -= MEGASAS_REDUCE_QD_COUNT;
@@ -632,7 +633,7 @@ megasas_alloc_request_fusion(struct megasas_instance *instance)
fusion->io_request_frames =
dma_pool_alloc(fusion->io_request_frames_pool,
- GFP_KERNEL,
+ GFP_KERNEL | __GFP_NOWARN,
&fusion->io_request_frames_phys);
if (!fusion->io_request_frames) {
--
2.20.1
From: Oded Gabbay <[email protected]>
[ Upstream commit cf01514c5c6efa2d521d35e68dff2e0674d08e91 ]
During device memory memset, the driver allocates and use a CB (command
buffer). To reuse existing code, it keeps a pointer to the CB in two
variables, user_cb and patched_cb. Therefore, there is no need to "put"
both the user_cb and patched_cb, as it will cause an underflow of the
refcnt of the CB.
Signed-off-by: Oded Gabbay <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/misc/habanalabs/goya/goya.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/misc/habanalabs/goya/goya.c b/drivers/misc/habanalabs/goya/goya.c
index f24fe909b88d8..b8a8de24aaf72 100644
--- a/drivers/misc/habanalabs/goya/goya.c
+++ b/drivers/misc/habanalabs/goya/goya.c
@@ -4690,8 +4690,6 @@ static int goya_memset_device_memory(struct hl_device *hdev, u64 addr, u64 size,
rc = goya_send_job_on_qman0(hdev, job);
- hl_cb_put(job->patched_cb);
-
hl_debugfs_remove_job(hdev, job);
kfree(job);
cb->cs_cnt--;
--
2.20.1
From: Oded Gabbay <[email protected]>
[ Upstream commit 908087ffbe896c100ed73d5f0ce11a5b7264af4a ]
The driver must halt the engines before doing hard-reset, otherwise the
device can go into undefined state. There is a place where the driver
didn't do that and this patch fixes it.
Reviewed-by: Tomer Tayar <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/misc/habanalabs/device.c | 1 +
drivers/misc/habanalabs/goya/goya.c | 42 +++++++++++++++++++++++++++++
2 files changed, 43 insertions(+)
diff --git a/drivers/misc/habanalabs/device.c b/drivers/misc/habanalabs/device.c
index b155e95490761..166883b647252 100644
--- a/drivers/misc/habanalabs/device.c
+++ b/drivers/misc/habanalabs/device.c
@@ -1189,6 +1189,7 @@ int hl_device_init(struct hl_device *hdev, struct class *hclass)
if (hdev->asic_funcs->get_hw_state(hdev) == HL_DEVICE_HW_STATE_DIRTY) {
dev_info(hdev->dev,
"H/W state is dirty, must reset before initializing\n");
+ hdev->asic_funcs->halt_engines(hdev, true);
hdev->asic_funcs->hw_fini(hdev, true);
}
diff --git a/drivers/misc/habanalabs/goya/goya.c b/drivers/misc/habanalabs/goya/goya.c
index 7344e8a222ae5..f24fe909b88d8 100644
--- a/drivers/misc/habanalabs/goya/goya.c
+++ b/drivers/misc/habanalabs/goya/goya.c
@@ -895,6 +895,11 @@ void goya_init_dma_qmans(struct hl_device *hdev)
*/
static void goya_disable_external_queues(struct hl_device *hdev)
{
+ struct goya_device *goya = hdev->asic_specific;
+
+ if (!(goya->hw_cap_initialized & HW_CAP_DMA))
+ return;
+
WREG32(mmDMA_QM_0_GLBL_CFG0, 0);
WREG32(mmDMA_QM_1_GLBL_CFG0, 0);
WREG32(mmDMA_QM_2_GLBL_CFG0, 0);
@@ -956,6 +961,11 @@ static int goya_stop_external_queues(struct hl_device *hdev)
{
int rc, retval = 0;
+ struct goya_device *goya = hdev->asic_specific;
+
+ if (!(goya->hw_cap_initialized & HW_CAP_DMA))
+ return retval;
+
rc = goya_stop_queue(hdev,
mmDMA_QM_0_GLBL_CFG1,
mmDMA_QM_0_CP_STS,
@@ -1744,9 +1754,18 @@ void goya_init_tpc_qmans(struct hl_device *hdev)
*/
static void goya_disable_internal_queues(struct hl_device *hdev)
{
+ struct goya_device *goya = hdev->asic_specific;
+
+ if (!(goya->hw_cap_initialized & HW_CAP_MME))
+ goto disable_tpc;
+
WREG32(mmMME_QM_GLBL_CFG0, 0);
WREG32(mmMME_CMDQ_GLBL_CFG0, 0);
+disable_tpc:
+ if (!(goya->hw_cap_initialized & HW_CAP_TPC))
+ return;
+
WREG32(mmTPC0_QM_GLBL_CFG0, 0);
WREG32(mmTPC0_CMDQ_GLBL_CFG0, 0);
@@ -1782,8 +1801,12 @@ static void goya_disable_internal_queues(struct hl_device *hdev)
*/
static int goya_stop_internal_queues(struct hl_device *hdev)
{
+ struct goya_device *goya = hdev->asic_specific;
int rc, retval = 0;
+ if (!(goya->hw_cap_initialized & HW_CAP_MME))
+ goto stop_tpc;
+
/*
* Each queue (QMAN) is a separate H/W logic. That means that each
* QMAN can be stopped independently and failure to stop one does NOT
@@ -1810,6 +1833,10 @@ static int goya_stop_internal_queues(struct hl_device *hdev)
retval = -EIO;
}
+stop_tpc:
+ if (!(goya->hw_cap_initialized & HW_CAP_TPC))
+ return retval;
+
rc = goya_stop_queue(hdev,
mmTPC0_QM_GLBL_CFG1,
mmTPC0_QM_CP_STS,
@@ -1975,6 +2002,11 @@ static int goya_stop_internal_queues(struct hl_device *hdev)
static void goya_dma_stall(struct hl_device *hdev)
{
+ struct goya_device *goya = hdev->asic_specific;
+
+ if (!(goya->hw_cap_initialized & HW_CAP_DMA))
+ return;
+
WREG32(mmDMA_QM_0_GLBL_CFG1, 1 << DMA_QM_0_GLBL_CFG1_DMA_STOP_SHIFT);
WREG32(mmDMA_QM_1_GLBL_CFG1, 1 << DMA_QM_1_GLBL_CFG1_DMA_STOP_SHIFT);
WREG32(mmDMA_QM_2_GLBL_CFG1, 1 << DMA_QM_2_GLBL_CFG1_DMA_STOP_SHIFT);
@@ -1984,6 +2016,11 @@ static void goya_dma_stall(struct hl_device *hdev)
static void goya_tpc_stall(struct hl_device *hdev)
{
+ struct goya_device *goya = hdev->asic_specific;
+
+ if (!(goya->hw_cap_initialized & HW_CAP_TPC))
+ return;
+
WREG32(mmTPC0_CFG_TPC_STALL, 1 << TPC0_CFG_TPC_STALL_V_SHIFT);
WREG32(mmTPC1_CFG_TPC_STALL, 1 << TPC1_CFG_TPC_STALL_V_SHIFT);
WREG32(mmTPC2_CFG_TPC_STALL, 1 << TPC2_CFG_TPC_STALL_V_SHIFT);
@@ -1996,6 +2033,11 @@ static void goya_tpc_stall(struct hl_device *hdev)
static void goya_mme_stall(struct hl_device *hdev)
{
+ struct goya_device *goya = hdev->asic_specific;
+
+ if (!(goya->hw_cap_initialized & HW_CAP_MME))
+ return;
+
WREG32(mmMME_STALL, 0xFFFFFFFF);
}
--
2.20.1
From: Lars-Peter Clausen <[email protected]>
[ Upstream commit 43d565727a3a6fd24e37c7c2116475106af71806 ]
ffs_aio_cancel() can be called from both interrupt and thread context. Make
sure that the current IRQ state is saved and restored by using
spin_{un,}lock_irq{save,restore}().
Otherwise undefined behavior might occur.
Acked-by: Michal Nazarewicz <[email protected]>
Signed-off-by: Lars-Peter Clausen <[email protected]>
Signed-off-by: Alexandru Ardelean <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/function/f_fs.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index 6f8b67e617716..bdac92d3a8d0c 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -1162,18 +1162,19 @@ static int ffs_aio_cancel(struct kiocb *kiocb)
{
struct ffs_io_data *io_data = kiocb->private;
struct ffs_epfile *epfile = kiocb->ki_filp->private_data;
+ unsigned long flags;
int value;
ENTER();
- spin_lock_irq(&epfile->ffs->eps_lock);
+ spin_lock_irqsave(&epfile->ffs->eps_lock, flags);
if (likely(io_data && io_data->ep && io_data->req))
value = usb_ep_dequeue(io_data->ep, io_data->req);
else
value = -EINVAL;
- spin_unlock_irq(&epfile->ffs->eps_lock);
+ spin_unlock_irqrestore(&epfile->ffs->eps_lock, flags);
return value;
}
--
2.20.1
From: Jiri Benc <[email protected]>
[ Upstream commit c363eb48ada5cf732b3f489fab799fc881097842 ]
With some shells, the command construed for install of bpf selftests becomes
too large due to long list of files:
make[1]: execvp: /bin/sh: Argument list too long
make[1]: *** [../lib.mk:73: install] Error 127
Currently, each of the file lists is replicated three times in the command:
in the shell 'if' condition, in the 'echo' and in the 'rsync'. Reduce that
by one instance by using make conditionals and separate the echo and rsync
into two shell commands. (One would be inclined to just remove the '@' at
the beginning of the rsync command and let 'make' echo it by itself;
unfortunately, it appears that the '@' in the front of mkdir silences output
also for the following commands.)
Also, separate handling of each of the lists to its own shell command.
The semantics of the makefile is unchanged before and after the patch. The
ability of individual test directories to override INSTALL_RULE is retained.
Reported-by: Yauheni Kaliuta <[email protected]>
Tested-by: Yauheni Kaliuta <[email protected]>
Signed-off-by: Jiri Benc <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/lib.mk | 23 +++++++++++++----------
1 file changed, 13 insertions(+), 10 deletions(-)
diff --git a/tools/testing/selftests/lib.mk b/tools/testing/selftests/lib.mk
index 1c8a1963d03f8..3ed0134a764d4 100644
--- a/tools/testing/selftests/lib.mk
+++ b/tools/testing/selftests/lib.mk
@@ -83,17 +83,20 @@ else
$(call RUN_TESTS, $(TEST_GEN_PROGS) $(TEST_CUSTOM_PROGS) $(TEST_PROGS))
endif
+define INSTALL_SINGLE_RULE
+ $(if $(INSTALL_LIST),@mkdir -p $(INSTALL_PATH))
+ $(if $(INSTALL_LIST),@echo rsync -a $(INSTALL_LIST) $(INSTALL_PATH)/)
+ $(if $(INSTALL_LIST),@rsync -a $(INSTALL_LIST) $(INSTALL_PATH)/)
+endef
+
define INSTALL_RULE
- @if [ "X$(TEST_PROGS)$(TEST_PROGS_EXTENDED)$(TEST_FILES)" != "X" ]; then \
- mkdir -p ${INSTALL_PATH}; \
- echo "rsync -a $(TEST_PROGS) $(TEST_PROGS_EXTENDED) $(TEST_FILES) $(INSTALL_PATH)/"; \
- rsync -a $(TEST_PROGS) $(TEST_PROGS_EXTENDED) $(TEST_FILES) $(INSTALL_PATH)/; \
- fi
- @if [ "X$(TEST_GEN_PROGS)$(TEST_CUSTOM_PROGS)$(TEST_GEN_PROGS_EXTENDED)$(TEST_GEN_FILES)" != "X" ]; then \
- mkdir -p ${INSTALL_PATH}; \
- echo "rsync -a $(TEST_GEN_PROGS) $(TEST_CUSTOM_PROGS) $(TEST_GEN_PROGS_EXTENDED) $(TEST_GEN_FILES) $(INSTALL_PATH)/"; \
- rsync -a $(TEST_GEN_PROGS) $(TEST_CUSTOM_PROGS) $(TEST_GEN_PROGS_EXTENDED) $(TEST_GEN_FILES) $(INSTALL_PATH)/; \
- fi
+ $(eval INSTALL_LIST = $(TEST_PROGS)) $(INSTALL_SINGLE_RULE)
+ $(eval INSTALL_LIST = $(TEST_PROGS_EXTENDED)) $(INSTALL_SINGLE_RULE)
+ $(eval INSTALL_LIST = $(TEST_FILES)) $(INSTALL_SINGLE_RULE)
+ $(eval INSTALL_LIST = $(TEST_GEN_PROGS)) $(INSTALL_SINGLE_RULE)
+ $(eval INSTALL_LIST = $(TEST_CUSTOM_PROGS)) $(INSTALL_SINGLE_RULE)
+ $(eval INSTALL_LIST = $(TEST_GEN_PROGS_EXTENDED)) $(INSTALL_SINGLE_RULE)
+ $(eval INSTALL_LIST = $(TEST_GEN_FILES)) $(INSTALL_SINGLE_RULE)
endef
install: all
--
2.20.1
On 3/2/20 7:45 PM, Sasha Levin wrote:
> From: Nikita Sobolev <[email protected]>
>
> [ Upstream commit b32694cd0724d4ceca2c62cc7c3d3a8d1ffa11fc ]
>
> tpm2 tests set fails if there is no /dev/tpm0 and /dev/tpmrm0
> supported. Check if these files exist before run and mark test as
> skipped in case of absence.
>
> Signed-off-by: Nikita Sobolev <[email protected]>
> Signed-off-by: Shuah Khan <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
> ---
> tools/testing/selftests/tpm2/test_smoke.sh | 13 +++++++++++--
> tools/testing/selftests/tpm2/test_space.sh | 9 ++++++++-
> 2 files changed, 19 insertions(+), 3 deletions(-)
>
Let's drop this unless it already made it into stables.
Jarkko Sakkinen found regressions and send in a revert
for this patch.
thanks,
-- Shuah
On Tue, Apr 14, 2020 at 10:04:40AM -0600, shuah wrote:
> On 3/2/20 7:45 PM, Sasha Levin wrote:
> > From: Nikita Sobolev <[email protected]>
> >
> > [ Upstream commit b32694cd0724d4ceca2c62cc7c3d3a8d1ffa11fc ]
> >
> > tpm2 tests set fails if there is no /dev/tpm0 and /dev/tpmrm0
> > supported. Check if these files exist before run and mark test as
> > skipped in case of absence.
> >
> > Signed-off-by: Nikita Sobolev <[email protected]>
> > Signed-off-by: Shuah Khan <[email protected]>
> > Signed-off-by: Sasha Levin <[email protected]>
> > ---
> > tools/testing/selftests/tpm2/test_smoke.sh | 13 +++++++++++--
> > tools/testing/selftests/tpm2/test_space.sh | 9 ++++++++-
> > 2 files changed, 19 insertions(+), 3 deletions(-)
> >
>
> Let's drop this unless it already made it into stables.
> Jarkko Sakkinen found regressions and send in a revert
> for this patch.
>
> thanks,
> -- Shuah
Thanks, can ack this.
/Jarkko