An expermental test with the command below gives this error:
arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dt.yaml:
spdif@ff870000:
'i2c-scl-falling-time-ns', 'i2c-scl-rising-time-ns', 'power-domains'
do not match any of the regexes: 'pinctrl-[0-9]+'
'i2c-scl-falling-time-ns', 'i2c-scl-rising-time-ns'
are not valid properties for 'spdif' nodes, so remove them.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/sound/rockchip-spdif.yaml
Signed-off-by: Johan Jonker <[email protected]>
---
arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
index b4d8f60b7..73e269a8a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
@@ -230,7 +230,5 @@
};
&spdif {
- i2c-scl-rising-time-ns = <450>;
- i2c-scl-falling-time-ns = <15>;
status = "okay";
};
--
2.11.0
Current dts files with 'spdif' nodes are manually verified.
In order to automate this process rockchip-spdif.txt
has to be converted to yaml. In the new setup dtbs_check with
rockchip-spdif.yaml expect clocks and clock-names values
in the same order. Fix this for some older Rockchip models.
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/sound/rockchip-spdif.yaml
Signed-off-by: Johan Jonker <[email protected]>
---
arch/arm/boot/dts/rk3188.dtsi | 4 ++--
arch/arm/boot/dts/rk3288.dtsi | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 24abf214a..2298a8d84 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -182,8 +182,8 @@
compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif";
reg = <0x1011e000 0x2000>;
#sound-dai-cells = <0>;
- clock-names = "hclk", "mclk";
- clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>;
+ clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF>;
+ clock-names = "mclk", "hclk";
dmas = <&dmac1_s 8>;
dma-names = "tx";
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 485234f6a..07681f1f0 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -944,8 +944,8 @@
compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif";
reg = <0x0 0xff8b0000 0x0 0x10000>;
#sound-dai-cells = <0>;
- clock-names = "hclk", "mclk";
- clocks = <&cru HCLK_SPDIF8CH>, <&cru SCLK_SPDIF8CH>;
+ clocks = <&cru SCLK_SPDIF8CH>, <&cru HCLK_SPDIF8CH>;
+ clock-names = "mclk", "hclk";
dmas = <&dmac_bus_s 3>;
dma-names = "tx";
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
--
2.11.0
Am Donnerstag, 12. M?rz 2020, 18:22:40 CET schrieb Johan Jonker:
> Current dts files with 'spdif' nodes are manually verified.
> In order to automate this process rockchip-spdif.txt
> has to be converted to yaml. In the new setup dtbs_check with
> rockchip-spdif.yaml expect clocks and clock-names values
> in the same order. Fix this for some older Rockchip models.
>
> make ARCH=arm dtbs_check
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/sound/rockchip-spdif.yaml
>
> Signed-off-by: Johan Jonker <[email protected]>
applied for 5.7
Thanks
Heiko
Am Donnerstag, 12. M?rz 2020, 18:22:39 CET schrieb Johan Jonker:
> An expermental test with the command below gives this error:
>
> arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dt.yaml:
> spdif@ff870000:
> 'i2c-scl-falling-time-ns', 'i2c-scl-rising-time-ns', 'power-domains'
> do not match any of the regexes: 'pinctrl-[0-9]+'
>
> 'i2c-scl-falling-time-ns', 'i2c-scl-rising-time-ns'
> are not valid properties for 'spdif' nodes, so remove them.
>
> make ARCH=arm64 dtbs_check
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/sound/rockchip-spdif.yaml
>
> Signed-off-by: Johan Jonker <[email protected]>
applied for 5.7
Thanks
Heiko