On the Amlogic G12A and compatible SoCs, the SPI NOR pins are shared with the
eMMC data 4 to 7 pins, thus the DT needs some tweaking to allow setting
on the data 0 to 3 pins for the eMMC controller to enable the eMMC in the
same time as the SPIFC controller.
Since this lowers the performance of the eMMC, the SPIFC is left disabled
and intructions to enable the SPIFC controller as added like done for
the Khadas VIM2 SPIFC support.
This adds SPI NOR support for Khadas VIM3 boards (S922X, A311A and S905D3)
and Odroid-N2 using the same scheme.
Neil Armstrong (4):
arm64: dts: meson-g12: split emmc pins to select 4 or 8 bus width
arm64: dts: meson-g12: add the SPIFC nodes
arm64: dts: khadas-vim3: add SPIFC controller node
arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node
.../boot/dts/amlogic/meson-g12-common.dtsi | 60 +++++++++++++++----
.../boot/dts/amlogic/meson-g12a-sei510.dts | 2 +-
.../boot/dts/amlogic/meson-g12a-u200.dts | 2 +-
.../boot/dts/amlogic/meson-g12a-x96-max.dts | 2 +-
.../boot/dts/amlogic/meson-g12b-odroid-n2.dts | 23 ++++++-
.../boot/dts/amlogic/meson-g12b-ugoos-am6.dts | 2 +-
.../boot/dts/amlogic/meson-khadas-vim3.dtsi | 22 ++++++-
.../boot/dts/amlogic/meson-sm1-sei610.dts | 2 +-
8 files changed, 98 insertions(+), 17 deletions(-)
--
2.22.0
The Khadas VIM3 shares the eMMC pins 4 to 7 with the SPI NOR, in order
to enable the eMMC and the SPI NOR interface, we need to omit the
4 last pins from the eMMC pinctrl.
As it was done for the Khadas VIM2, split the eMMC pinctrls in ctrl, data
and ds pins with either 4bits data or 8bits data, and update the current
board accordingly.
Signed-off-by: Neil Armstrong <[email protected]>
---
.../boot/dts/amlogic/meson-g12-common.dtsi | 40 ++++++++++++++-----
.../boot/dts/amlogic/meson-g12a-sei510.dts | 2 +-
.../boot/dts/amlogic/meson-g12a-u200.dts | 2 +-
.../boot/dts/amlogic/meson-g12a-x96-max.dts | 2 +-
.../boot/dts/amlogic/meson-g12b-odroid-n2.dts | 2 +-
.../boot/dts/amlogic/meson-g12b-ugoos-am6.dts | 2 +-
.../boot/dts/amlogic/meson-khadas-vim3.dtsi | 2 +-
.../boot/dts/amlogic/meson-sm1-sei610.dts | 2 +-
8 files changed, 37 insertions(+), 17 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 87b9a47a51b9..d09efb86ec33 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -295,17 +295,9 @@
};
};
- emmc_pins: emmc {
+ emmc_ctrl_pins: emmc-ctrl {
mux-0 {
- groups = "emmc_nand_d0",
- "emmc_nand_d1",
- "emmc_nand_d2",
- "emmc_nand_d3",
- "emmc_nand_d4",
- "emmc_nand_d5",
- "emmc_nand_d6",
- "emmc_nand_d7",
- "emmc_cmd";
+ groups = "emmc_cmd";
function = "emmc";
bias-pull-up;
drive-strength-microamp = <4000>;
@@ -319,6 +311,34 @@
};
};
+ emmc_data_4b_pins: emmc-data-4b {
+ mux-0 {
+ groups = "emmc_nand_d0",
+ "emmc_nand_d1",
+ "emmc_nand_d2",
+ "emmc_nand_d3";
+ function = "emmc";
+ bias-pull-up;
+ drive-strength-microamp = <4000>;
+ };
+ };
+
+ emmc_data_8b_pins: emmc-data-8b {
+ mux-0 {
+ groups = "emmc_nand_d0",
+ "emmc_nand_d1",
+ "emmc_nand_d2",
+ "emmc_nand_d3",
+ "emmc_nand_d4",
+ "emmc_nand_d5",
+ "emmc_nand_d6",
+ "emmc_nand_d7";
+ function = "emmc";
+ bias-pull-up;
+ drive-strength-microamp = <4000>;
+ };
+ };
+
emmc_ds_pins: emmc-ds {
mux {
groups = "emmc_nand_ds";
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index 168f460e11fa..b00d0468c753 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -472,7 +472,7 @@
/* eMMC */
&sd_emmc_c {
status = "okay";
- pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+ pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
index 2a324f0136e3..a26bfe72550f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
@@ -271,7 +271,7 @@
/* eMMC */
&sd_emmc_c {
status = "okay";
- pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+ pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
index 4f2596d82989..1b07c8c06eac 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
@@ -443,7 +443,7 @@
/* eMMC */
&sd_emmc_c {
status = "okay";
- pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+ pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
index 8830d3844885..b59ae1a297f2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
@@ -435,7 +435,7 @@
/* eMMC */
&sd_emmc_c {
status = "okay";
- pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+ pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
index ccd0bced01e8..325e448eb09c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
@@ -485,7 +485,7 @@
/* eMMC */
&sd_emmc_c {
status = "okay";
- pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+ pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index 90815fa25ec6..b6f22a0bd318 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -312,7 +312,7 @@
/* eMMC */
&sd_emmc_c {
status = "okay";
- pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+ pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index a8bb3fa9fec9..71cc730a4913 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -518,7 +518,7 @@
/* eMMC */
&sd_emmc_c {
status = "okay";
- pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+ pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
--
2.22.0
Add the controller and pinctrl nodes to enable the SPI Flash Controller
on the Amlogic G12A and compatible SoCs.
Signed-off-by: Neil Armstrong <[email protected]>
---
.../boot/dts/amlogic/meson-g12-common.dtsi | 20 +++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index d09efb86ec33..56a9f8eadf01 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -593,6 +593,17 @@
};
};
+ nor_pins: nor {
+ mux {
+ groups = "nor_d",
+ "nor_q",
+ "nor_c",
+ "nor_cs";
+ function = "nor";
+ bias-disable;
+ };
+ };
+
pdm_din0_a_pins: pdm-din0-a {
mux {
groups = "pdm_din0_a";
@@ -2071,6 +2082,15 @@
amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
};
+ spifc: spi@14000 {
+ compatible = "amlogic,meson-gxbb-spifc";
+ status = "disabled";
+ reg = <0x0 0x14000 0x0 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc CLKID_CLK81>;
+ };
+
pwm_ef: pwm@19000 {
compatible = "amlogic,meson-g12a-ee-pwm";
reg = <0x0 0x19000 0x0 0x20>;
--
2.22.0
Add disabled SPIFC controller node with instruction on how to enable
it while lowering capabilities of the eMMC controller from 8bits bus
width to 4bits bus width, it's data pins 4 to 7 being shared with
the SPI NOR controller pins.
Signed-off-by: Neil Armstrong <[email protected]>
---
.../boot/dts/amlogic/meson-g12b-odroid-n2.dts | 21 +++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
index b59ae1a297f2..169ea283d4ee 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
@@ -451,6 +451,27 @@
vqmmc-supply = <&flash_1v8>;
};
+/*
+ * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR pins
+ * and eMMC Data 4 to 7 pins.
+ * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0,
+ * and change bus-width to 4 then spifc can be enabled.
+ * The SW1 slide should also be set to the correct position.
+ */
+&spifc {
+ status = "disabled";
+ pinctrl-0 = <&nor_pins>;
+ pinctrl-names = "default";
+
+ mx25u64: spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mxicy,mx25u6435f", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <104000000>;
+ };
+};
+
&tdmif_b {
status = "okay";
};
--
2.22.0
Add disabled SPIFC controller node with instruction on how to enable
it while lowering capabilities of the eMMC controller from 8bits bus
width to 4bits bus width, it's data pins 4 to 7 being shared with
the SPI NOR controller pins.
Signed-off-by: Neil Armstrong <[email protected]>
---
.../boot/dts/amlogic/meson-khadas-vim3.dtsi | 20 +++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index b6f22a0bd318..f09854560938 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -328,6 +328,26 @@
vqmmc-supply = <&emmc_1v8>;
};
+/*
+ * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR CS
+ * and eMMC Data 4 to 7 pins.
+ * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0,
+ * and change bus-width to 4 then spifc can be enabled.
+ */
+&spifc {
+ status = "disabled";
+ pinctrl-0 = <&nor_pins>;
+ pinctrl-names = "default";
+
+ w25q32: spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "winbond,w25q128fw", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <104000000>;
+ };
+};
+
&uart_A {
status = "okay";
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
--
2.22.0