From: Igor Opaniuk <[email protected]>
Introduce DTS for Colibri iMX6S/DL V1.1x re-design, where UHS-I support was
added. Provide proper configuration for VGEN3, which allows that rail to
be automatically switched to 1.8 volts for proper UHS-I operation mode.
Signed-off-by: Igor Opaniuk <[email protected]>
---
v4:
- Document Colibri iMX6S/DL V1.1x re-design devicetree binding [Shawn Guo]
- wakeup-source property fix [Shawn Guo]
v3:
- change hierarchy according to Marco's suggestions [Marco Felsch]
- adjust compatible string adding v1.1 [Stefan Agner]
v2:
- rework hierarchy of dts files, and a separate dtsi for Colibri
iMX6S/DL V1.1x re-design, where UHS-I was added [Marcel Ziswiler]
- add comments about vgen3 power rail [Marcel Ziswiler]
- fix other minor issues, addressing Marcel's comments. [Marcel Ziswiler]
arch/arm/boot/dts/Makefile | 1 +
.../boot/dts/imx6dl-colibri-v1_1-eval-v3.dts | 59 +++++++++++++++++++
arch/arm/boot/dts/imx6qdl-colibri.dtsi | 11 +++-
3 files changed, 70 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d6546d2676b9..97da51be1de6 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -412,6 +412,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-aristainetos2_4.dtb \
imx6dl-aristainetos2_7.dtb \
imx6dl-colibri-eval-v3.dtb \
+ imx6dl-colibri-v1_1-eval-v3.dtb \
imx6dl-cubox-i.dtb \
imx6dl-cubox-i-emmc-som-v15.dtb \
imx6dl-cubox-i-som-v15.dtb \
diff --git a/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts
new file mode 100644
index 000000000000..fced7d99f5d5
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2019 Toradex AG
+ */
+
+/dts-v1/;
+
+#include "imx6dl-colibri-eval-v3.dts"
+
+/ {
+ model = "Toradex Colibri iMX6DL/S V1.1 on Colibri Evaluation Board V3";
+ compatible = "toradex,colibri_imx6dl-v1_1-eval-v3",
+ "toradex,colibri_imx6dl-v1_1",
+ "toradex,colibri_imx6dl-eval-v3",
+ "toradex,colibri_imx6dl",
+ "fsl,imx6dl";
+};
+
+&iomuxc {
+ pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170b1
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100b1
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f1
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f1
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1
+ >;
+ };
+};
+
+/* Colibri MMC */
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>;
+ vmmc-supply = <®_module_3v3>;
+ vqmmc-supply = <&vgen3_reg>;
+ wakeup-source;
+ keep-power-in-suspend;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ status = "okay";
+ /delete-property/no-1-8-v;
+};
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index d03dff23863d..e85a41e84fd4 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -229,7 +229,16 @@
regulator-always-on;
};
- /* vgen3: unused */
+ /*
+ * +V3.3_1.8_SD1 coming off VGEN3 and supplying
+ * the i.MX 6 NVCC_SD1.
+ */
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
vgen4_reg: vgen4 {
regulator-min-microvolt = <1800000>;
--
2.17.1
On Thu, Mar 12, 2020 at 08:51:13PM +0200, Igor Opaniuk wrote:
> From: Igor Opaniuk <[email protected]>
>
> Introduce DTS for Colibri iMX6S/DL V1.1x re-design, where UHS-I support was
> added. Provide proper configuration for VGEN3, which allows that rail to
> be automatically switched to 1.8 volts for proper UHS-I operation mode.
>
> Signed-off-by: Igor Opaniuk <[email protected]>
>
> ---
>
> v4:
> - Document Colibri iMX6S/DL V1.1x re-design devicetree binding [Shawn Guo]
> - wakeup-source property fix [Shawn Guo]
>
> v3:
> - change hierarchy according to Marco's suggestions [Marco Felsch]
> - adjust compatible string adding v1.1 [Stefan Agner]
>
> v2:
> - rework hierarchy of dts files, and a separate dtsi for Colibri
> iMX6S/DL V1.1x re-design, where UHS-I was added [Marcel Ziswiler]
> - add comments about vgen3 power rail [Marcel Ziswiler]
> - fix other minor issues, addressing Marcel's comments. [Marcel Ziswiler]
>
> arch/arm/boot/dts/Makefile | 1 +
> .../boot/dts/imx6dl-colibri-v1_1-eval-v3.dts | 59 +++++++++++++++++++
> arch/arm/boot/dts/imx6qdl-colibri.dtsi | 11 +++-
> 3 files changed, 70 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index d6546d2676b9..97da51be1de6 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -412,6 +412,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
> imx6dl-aristainetos2_4.dtb \
> imx6dl-aristainetos2_7.dtb \
> imx6dl-colibri-eval-v3.dtb \
> + imx6dl-colibri-v1_1-eval-v3.dtb \
> imx6dl-cubox-i.dtb \
> imx6dl-cubox-i-emmc-som-v15.dtb \
> imx6dl-cubox-i-som-v15.dtb \
> diff --git a/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts
> new file mode 100644
> index 000000000000..fced7d99f5d5
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts
> @@ -0,0 +1,59 @@
> +// SPDX-License-Identifier: GPL-2.0 OR X11
> +/*
> + * Copyright 2019 Toradex AG
> + */
Shouldn't this follow what you just updated for other Toradex boards?
Shawn
> +
> +/dts-v1/;
> +
> +#include "imx6dl-colibri-eval-v3.dts"
> +
> +/ {
> + model = "Toradex Colibri iMX6DL/S V1.1 on Colibri Evaluation Board V3";
> + compatible = "toradex,colibri_imx6dl-v1_1-eval-v3",
> + "toradex,colibri_imx6dl-v1_1",
> + "toradex,colibri_imx6dl-eval-v3",
> + "toradex,colibri_imx6dl",
> + "fsl,imx6dl";
> +};
> +
> +&iomuxc {
> + pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
> + fsl,pins = <
> + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170b1
> + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100b1
> + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1
> + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1
> + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1
> + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1
> + >;
> + };
> +
> + pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
> + fsl,pins = <
> + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f1
> + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f1
> + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1
> + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1
> + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1
> + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1
> + >;
> + };
> +};
> +
> +/* Colibri MMC */
> +&usdhc1 {
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
> + pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>;
> + pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>;
> + vmmc-supply = <®_module_3v3>;
> + vqmmc-supply = <&vgen3_reg>;
> + wakeup-source;
> + keep-power-in-suspend;
> + sd-uhs-sdr12;
> + sd-uhs-sdr25;
> + sd-uhs-sdr50;
> + sd-uhs-sdr104;
> + status = "okay";
> + /delete-property/no-1-8-v;
> +};
> diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> index d03dff23863d..e85a41e84fd4 100644
> --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> @@ -229,7 +229,16 @@
> regulator-always-on;
> };
>
> - /* vgen3: unused */
> + /*
> + * +V3.3_1.8_SD1 coming off VGEN3 and supplying
> + * the i.MX 6 NVCC_SD1.
> + */
> + vgen3_reg: vgen3 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
>
> vgen4_reg: vgen4 {
> regulator-min-microvolt = <1800000>;
> --
> 2.17.1
>