ASKEY WWHC050 is a mcie LTE modem.
The oem configuration states:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1690 ProdID=7588 Rev=ff.ff
S: Manufacturer=Android
S: Product=Android
S: SerialNumber=813f0eef6e6e
C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
Tested on openwrt distribution.
Signed-off-by: Cezary Jackiewicz <[email protected]>
[add commit message]
Signed-off-by: Pawel Dembicki <[email protected]>
---
drivers/net/usb/qmi_wwan.c | 1 +
drivers/usb/serial/option.c | 2 ++
2 files changed, 3 insertions(+)
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 5754bb6ca0ee..6c738a271257 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1210,6 +1210,7 @@ static const struct usb_device_id products[] = {
{QMI_FIXED_INTF(0x1435, 0xd182, 5)}, /* Wistron NeWeb D18 */
{QMI_FIXED_INTF(0x1435, 0xd191, 4)}, /* Wistron NeWeb D19Q1 */
{QMI_QUIRK_SET_DTR(0x1508, 0x1001, 4)}, /* Fibocom NL668 series */
+ {QMI_FIXED_INTF(0x1690, 0x7588, 4)}, /* ASKEY WWHC050 */
{QMI_FIXED_INTF(0x16d8, 0x6003, 0)}, /* CMOTech 6003 */
{QMI_FIXED_INTF(0x16d8, 0x6007, 0)}, /* CMOTech CHE-628S */
{QMI_FIXED_INTF(0x16d8, 0x6008, 0)}, /* CMOTech CMU-301 */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 084cc2fff3ae..809e6ba85045 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2016,6 +2016,8 @@ static const struct usb_device_id option_ids[] = {
.driver_info = RSVD(4) | RSVD(5) },
{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff), /* Fibocom NL678 series */
.driver_info = RSVD(6) },
+ { USB_DEVICE(0x1690, 0x7588), /* ASKEY WWHC050 */
+ .driver_info = RSVD(1) | RSVD(4) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
--
2.20.1
Pawel Dembicki <[email protected]> writes:
> [add commit message]
Forgot to delete that line? :-)
> ---
> drivers/net/usb/qmi_wwan.c | 1 +
> drivers/usb/serial/option.c | 2 ++
> 2 files changed, 3 insertions(+)
You need to split this in two patches. The drivers are in two different
subsystems.
> diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
> index 5754bb6ca0ee..6c738a271257 100644
> --- a/drivers/net/usb/qmi_wwan.c
> +++ b/drivers/net/usb/qmi_wwan.c
> @@ -1210,6 +1210,7 @@ static const struct usb_device_id products[] = {
> {QMI_FIXED_INTF(0x1435, 0xd182, 5)}, /* Wistron NeWeb D18 */
> {QMI_FIXED_INTF(0x1435, 0xd191, 4)}, /* Wistron NeWeb D19Q1 */
> {QMI_QUIRK_SET_DTR(0x1508, 0x1001, 4)}, /* Fibocom NL668 series */
> + {QMI_FIXED_INTF(0x1690, 0x7588, 4)}, /* ASKEY WWHC050 */
> {QMI_FIXED_INTF(0x16d8, 0x6003, 0)}, /* CMOTech 6003 */
> {QMI_FIXED_INTF(0x16d8, 0x6007, 0)}, /* CMOTech CHE-628S */
> {QMI_FIXED_INTF(0x16d8, 0x6008, 0)}, /* CMOTech CMU-301 */
I know it isn't perfect as it is, but please try to sort new entries by
vid/pid if possible. Keep any logical grouping of entries though, of
that applies.
Thanks
Bjørn