2020-03-19 07:57:58

by Peng Fan

[permalink] [raw]
Subject: [PATCH V7 0/4] mailbox/firmware: imx: support SCU channel type

From: Peng Fan <[email protected]>

V7:
Per Leonard's comments, added check for TE/RE
Passed test from Leonard's https://github.com/cdleonard/imx-scu-test

V6:
Add Oleksij's R-b tag
Patch 3/4, per https://www.kernel.org/doc/Documentation/printk-formats.txt
should use %zu for printk sizeof

V5:
Move imx_mu_dcfg below imx_mu_priv
Add init hooks to imx_mu_dcfg
drop __packed __aligned
Add more debug msg
code style cleanup

V4:
Drop IMX_MU_TYPE_[GENERIC, SCU]
Pack MU chans init to separate function
Add separate function for SCU chans init and xlate
Add santity check to msg hdr.size
Limit SCU MU chans to 6, TX0/RX0/RXDB[0-3]

V3:
Rebase to Shawn's for-next
Include fsl,imx8-mu-scu compatible
Per Oleksij's comments, introduce generic tx/rx and added scu mu type
Check fsl,imx8-mu-scu in firmware driver for fast_ipc

V2:
Drop patch 1/3 which added fsl,scu property
Force to use scu channel type when machine has node compatible "fsl,imx-scu"
Force imx-scu to use fast_ipc

I not found a generic method to make SCFW message generic enough, SCFW
message is not fixed length including TX and RX. And it use TR0/RR0
interrupt.

V1:
Sorry to bind the mailbox/firmware patch together. This is make it
to understand what changed to support using 1 TX and 1 RX channel
for SCFW message.

Per i.MX8QXP Reference mannual, there are several message using
examples. One of them is:
Passing short messages: Transmit register(s) can be used to pass
short messages from one to four words in length. For example,
when a four-word message is desired, only one of the registers
needs to have its corresponding interrupt enable bit set at the
receiver side.

This patchset is to using this for SCFW message to replace four TX
and four RX method.

Peng Fan (4):
dt-bindings: mailbox: imx-mu: add SCU MU support
mailbox: imx: restructure code to make easy for new MU
mailbox: imx: add SCU MU support
firmware: imx-scu: Support one TX and one RX

.../devicetree/bindings/mailbox/fsl,mu.txt | 2 +
drivers/firmware/imx/imx-scu.c | 54 +++-
drivers/mailbox/imx-mailbox.c | 288 +++++++++++++++++----
3 files changed, 281 insertions(+), 63 deletions(-)


base-commit: e506dba69a5e9aaff20fd73a108639f84e2c39d9
--
2.16.4


2020-03-19 07:58:35

by Peng Fan

[permalink] [raw]
Subject: [PATCH V7 1/4] dt-bindings: mailbox: imx-mu: add SCU MU support

From: Peng Fan <[email protected]>

i.MX8/8X SCU MU is dedicated for communication between SCU
and Cortex-A cores from hardware design, it could not be reused
for other purpose. To use SCU MU more effectivly, add "fsl,imx8-scu-mu"
compatile to support fast IPC.

Reviewed-by: Oleksij Rempel <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
---
V7:
None
V6:
Add R-b tag
V5:
None
V4:
None
V3:
New patch

Documentation/devicetree/bindings/mailbox/fsl,mu.txt | 2 ++
1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.txt b/Documentation/devicetree/bindings/mailbox/fsl,mu.txt
index 9c43357c5924..31486c9f6443 100644
--- a/Documentation/devicetree/bindings/mailbox/fsl,mu.txt
+++ b/Documentation/devicetree/bindings/mailbox/fsl,mu.txt
@@ -23,6 +23,8 @@ Required properties:
be included together with SoC specific compatible.
There is a version 1.0 MU on imx7ulp, use "fsl,imx7ulp-mu"
compatible to support it.
+ To communicate with i.MX8 SCU, "fsl,imx8-mu-scu" could be
+ used for fast IPC
- reg : Should contain the registers location and length
- interrupts : Interrupt number. The interrupt specifier format depends
on the interrupt controller parent.
--
2.16.4

2020-03-19 07:58:49

by Peng Fan

[permalink] [raw]
Subject: [PATCH V7 2/4] mailbox: imx: restructure code to make easy for new MU

From: Peng Fan <[email protected]>

Add imx_mu_generic_tx for data send and imx_mu_generic_rx for interrupt
data receive.

Pack original mu chans related code into imx_mu_init_generic

Add tx/rx/init hooks into imx_mu_dcfg

With these, it will be a bit easy to introduce i.MX8/8X SCU type
MU dedicated to communicate with SCU.

Reviewed-by: Oleksij Rempel <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
---
V7:
None
V6:
Add R-b tag
V5:
imx_mu_dcfg moved to below imx_mu_priv
Add init hooks
V4:
Pack MU chans init to imx_mu_init_generic
V3:
New patch, restructure code.

drivers/mailbox/imx-mailbox.c | 137 +++++++++++++++++++++++++-----------------
1 file changed, 83 insertions(+), 54 deletions(-)

diff --git a/drivers/mailbox/imx-mailbox.c b/drivers/mailbox/imx-mailbox.c
index 2cdcdc5f1119..df6c4ecd913c 100644
--- a/drivers/mailbox/imx-mailbox.c
+++ b/drivers/mailbox/imx-mailbox.c
@@ -36,13 +36,6 @@ enum imx_mu_chan_type {
IMX_MU_TYPE_RXDB, /* Rx doorbell */
};

-struct imx_mu_dcfg {
- u32 xTR[4]; /* Transmit Registers */
- u32 xRR[4]; /* Receive Registers */
- u32 xSR; /* Status Register */
- u32 xCR; /* Control Register */
-};
-
struct imx_mu_con_priv {
unsigned int idx;
char irq_desc[IMX_MU_CHAN_NAME_SIZE];
@@ -67,18 +60,14 @@ struct imx_mu_priv {
bool side_b;
};

-static const struct imx_mu_dcfg imx_mu_cfg_imx6sx = {
- .xTR = {0x0, 0x4, 0x8, 0xc},
- .xRR = {0x10, 0x14, 0x18, 0x1c},
- .xSR = 0x20,
- .xCR = 0x24,
-};
-
-static const struct imx_mu_dcfg imx_mu_cfg_imx7ulp = {
- .xTR = {0x20, 0x24, 0x28, 0x2c},
- .xRR = {0x40, 0x44, 0x48, 0x4c},
- .xSR = 0x60,
- .xCR = 0x64,
+struct imx_mu_dcfg {
+ int (*tx)(struct imx_mu_priv *priv, struct imx_mu_con_priv *cp, void *data);
+ int (*rx)(struct imx_mu_priv *priv, struct imx_mu_con_priv *cp);
+ void (*init)(struct imx_mu_priv *priv);
+ u32 xTR[4]; /* Transmit Registers */
+ u32 xRR[4]; /* Receive Registers */
+ u32 xSR; /* Status Register */
+ u32 xCR; /* Control Register */
};

static struct imx_mu_priv *to_imx_mu_priv(struct mbox_controller *mbox)
@@ -111,6 +100,40 @@ static u32 imx_mu_xcr_rmw(struct imx_mu_priv *priv, u32 set, u32 clr)
return val;
}

+static int imx_mu_generic_tx(struct imx_mu_priv *priv,
+ struct imx_mu_con_priv *cp,
+ void *data)
+{
+ u32 *arg = data;
+
+ switch (cp->type) {
+ case IMX_MU_TYPE_TX:
+ imx_mu_write(priv, *arg, priv->dcfg->xTR[cp->idx]);
+ imx_mu_xcr_rmw(priv, IMX_MU_xCR_TIEn(cp->idx), 0);
+ break;
+ case IMX_MU_TYPE_TXDB:
+ imx_mu_xcr_rmw(priv, IMX_MU_xCR_GIRn(cp->idx), 0);
+ tasklet_schedule(&cp->txdb_tasklet);
+ break;
+ default:
+ dev_warn_ratelimited(priv->dev, "Send data on wrong channel type: %d\n", cp->type);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int imx_mu_generic_rx(struct imx_mu_priv *priv,
+ struct imx_mu_con_priv *cp)
+{
+ u32 dat;
+
+ dat = imx_mu_read(priv, priv->dcfg->xRR[cp->idx]);
+ mbox_chan_received_data(cp->chan, (void *)&dat);
+
+ return 0;
+}
+
static void imx_mu_txdb_tasklet(unsigned long data)
{
struct imx_mu_con_priv *cp = (struct imx_mu_con_priv *)data;
@@ -123,7 +146,7 @@ static irqreturn_t imx_mu_isr(int irq, void *p)
struct mbox_chan *chan = p;
struct imx_mu_priv *priv = to_imx_mu_priv(chan->mbox);
struct imx_mu_con_priv *cp = chan->con_priv;
- u32 val, ctrl, dat;
+ u32 val, ctrl;

ctrl = imx_mu_read(priv, priv->dcfg->xCR);
val = imx_mu_read(priv, priv->dcfg->xSR);
@@ -152,8 +175,7 @@ static irqreturn_t imx_mu_isr(int irq, void *p)
imx_mu_xcr_rmw(priv, 0, IMX_MU_xCR_TIEn(cp->idx));
mbox_chan_txdone(chan, 0);
} else if (val == IMX_MU_xSR_RFn(cp->idx)) {
- dat = imx_mu_read(priv, priv->dcfg->xRR[cp->idx]);
- mbox_chan_received_data(chan, (void *)&dat);
+ priv->dcfg->rx(priv, cp);
} else if (val == IMX_MU_xSR_GIPn(cp->idx)) {
imx_mu_write(priv, IMX_MU_xSR_GIPn(cp->idx), priv->dcfg->xSR);
mbox_chan_received_data(chan, NULL);
@@ -169,23 +191,8 @@ static int imx_mu_send_data(struct mbox_chan *chan, void *data)
{
struct imx_mu_priv *priv = to_imx_mu_priv(chan->mbox);
struct imx_mu_con_priv *cp = chan->con_priv;
- u32 *arg = data;
-
- switch (cp->type) {
- case IMX_MU_TYPE_TX:
- imx_mu_write(priv, *arg, priv->dcfg->xTR[cp->idx]);
- imx_mu_xcr_rmw(priv, IMX_MU_xCR_TIEn(cp->idx), 0);
- break;
- case IMX_MU_TYPE_TXDB:
- imx_mu_xcr_rmw(priv, IMX_MU_xCR_GIRn(cp->idx), 0);
- tasklet_schedule(&cp->txdb_tasklet);
- break;
- default:
- dev_warn_ratelimited(priv->dev, "Send data on wrong channel type: %d\n", cp->type);
- return -EINVAL;
- }

- return 0;
+ return priv->dcfg->tx(priv, cp, data);
}

static int imx_mu_startup(struct mbox_chan *chan)
@@ -280,6 +287,22 @@ static struct mbox_chan * imx_mu_xlate(struct mbox_controller *mbox,

static void imx_mu_init_generic(struct imx_mu_priv *priv)
{
+ unsigned int i;
+
+ for (i = 0; i < IMX_MU_CHANS; i++) {
+ struct imx_mu_con_priv *cp = &priv->con_priv[i];
+
+ cp->idx = i % 4;
+ cp->type = i >> 2;
+ cp->chan = &priv->mbox_chans[i];
+ priv->mbox_chans[i].con_priv = cp;
+ snprintf(cp->irq_desc, sizeof(cp->irq_desc),
+ "imx_mu_chan[%i-%i]", cp->type, cp->idx);
+ }
+
+ priv->mbox.num_chans = IMX_MU_CHANS;
+ priv->mbox.of_xlate = imx_mu_xlate;
+
if (priv->side_b)
return;

@@ -293,7 +316,6 @@ static int imx_mu_probe(struct platform_device *pdev)
struct device_node *np = dev->of_node;
struct imx_mu_priv *priv;
const struct imx_mu_dcfg *dcfg;
- unsigned int i;
int ret;

priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
@@ -329,32 +351,19 @@ static int imx_mu_probe(struct platform_device *pdev)
return ret;
}

- for (i = 0; i < IMX_MU_CHANS; i++) {
- struct imx_mu_con_priv *cp = &priv->con_priv[i];
-
- cp->idx = i % 4;
- cp->type = i >> 2;
- cp->chan = &priv->mbox_chans[i];
- priv->mbox_chans[i].con_priv = cp;
- snprintf(cp->irq_desc, sizeof(cp->irq_desc),
- "imx_mu_chan[%i-%i]", cp->type, cp->idx);
- }
-
priv->side_b = of_property_read_bool(np, "fsl,mu-side-b");

+ priv->dcfg->init(priv);
+
spin_lock_init(&priv->xcr_lock);

priv->mbox.dev = dev;
priv->mbox.ops = &imx_mu_ops;
priv->mbox.chans = priv->mbox_chans;
- priv->mbox.num_chans = IMX_MU_CHANS;
- priv->mbox.of_xlate = imx_mu_xlate;
priv->mbox.txdone_irq = true;

platform_set_drvdata(pdev, priv);

- imx_mu_init_generic(priv);
-
return devm_mbox_controller_register(dev, &priv->mbox);
}

@@ -367,6 +376,26 @@ static int imx_mu_remove(struct platform_device *pdev)
return 0;
}

+static const struct imx_mu_dcfg imx_mu_cfg_imx6sx = {
+ .tx = imx_mu_generic_tx,
+ .rx = imx_mu_generic_rx,
+ .init = imx_mu_init_generic,
+ .xTR = {0x0, 0x4, 0x8, 0xc},
+ .xRR = {0x10, 0x14, 0x18, 0x1c},
+ .xSR = 0x20,
+ .xCR = 0x24,
+};
+
+static const struct imx_mu_dcfg imx_mu_cfg_imx7ulp = {
+ .tx = imx_mu_generic_tx,
+ .rx = imx_mu_generic_rx,
+ .init = imx_mu_init_generic,
+ .xTR = {0x20, 0x24, 0x28, 0x2c},
+ .xRR = {0x40, 0x44, 0x48, 0x4c},
+ .xSR = 0x60,
+ .xCR = 0x64,
+};
+
static const struct of_device_id imx_mu_dt_ids[] = {
{ .compatible = "fsl,imx7ulp-mu", .data = &imx_mu_cfg_imx7ulp },
{ .compatible = "fsl,imx6sx-mu", .data = &imx_mu_cfg_imx6sx },
--
2.16.4

2020-03-19 07:59:05

by Peng Fan

[permalink] [raw]
Subject: [PATCH V7 4/4] firmware: imx-scu: Support one TX and one RX

From: Peng Fan <[email protected]>

Current imx-scu requires four TX and four RX to communicate with
SCU. This is low efficient and causes lots of mailbox interrupts.

With imx-mailbox driver could support one TX to use all four transmit
registers and one RX to use all four receive registers, imx-scu
could use one TX and one RX.

Signed-off-by: Peng Fan <[email protected]>
---

V7:
None
V6:
None
V5:
None
V4:
None
V3:
Check mbox fsl,imx8-mu-scu for fast_ipc

drivers/firmware/imx/imx-scu.c | 54 +++++++++++++++++++++++++++++++++---------
1 file changed, 43 insertions(+), 11 deletions(-)

diff --git a/drivers/firmware/imx/imx-scu.c b/drivers/firmware/imx/imx-scu.c
index f71eaa5bf52d..e94a5585b698 100644
--- a/drivers/firmware/imx/imx-scu.c
+++ b/drivers/firmware/imx/imx-scu.c
@@ -38,6 +38,7 @@ struct imx_sc_ipc {
struct device *dev;
struct mutex lock;
struct completion done;
+ bool fast_ipc;

/* temporarily store the SCU msg */
u32 *msg;
@@ -115,6 +116,7 @@ static void imx_scu_rx_callback(struct mbox_client *c, void *msg)
struct imx_sc_ipc *sc_ipc = sc_chan->sc_ipc;
struct imx_sc_rpc_msg *hdr;
u32 *data = msg;
+ int i;

if (!sc_ipc->msg) {
dev_warn(sc_ipc->dev, "unexpected rx idx %d 0x%08x, ignore!\n",
@@ -122,6 +124,19 @@ static void imx_scu_rx_callback(struct mbox_client *c, void *msg)
return;
}

+ if (sc_ipc->fast_ipc) {
+ hdr = msg;
+ sc_ipc->rx_size = hdr->size;
+ sc_ipc->msg[0] = *data++;
+
+ for (i = 1; i < sc_ipc->rx_size; i++)
+ sc_ipc->msg[i] = *data++;
+
+ complete(&sc_ipc->done);
+
+ return;
+ }
+
if (sc_chan->idx == 0) {
hdr = msg;
sc_ipc->rx_size = hdr->size;
@@ -147,6 +162,7 @@ static int imx_scu_ipc_write(struct imx_sc_ipc *sc_ipc, void *msg)
struct imx_sc_chan *sc_chan;
u32 *data = msg;
int ret;
+ int size;
int i;

/* Check size */
@@ -156,7 +172,8 @@ static int imx_scu_ipc_write(struct imx_sc_ipc *sc_ipc, void *msg)
dev_dbg(sc_ipc->dev, "RPC SVC %u FUNC %u SIZE %u\n", hdr->svc,
hdr->func, hdr->size);

- for (i = 0; i < hdr->size; i++) {
+ size = sc_ipc->fast_ipc ? 1 : hdr->size;
+ for (i = 0; i < size; i++) {
sc_chan = &sc_ipc->chans[i % 4];

/*
@@ -168,8 +185,10 @@ static int imx_scu_ipc_write(struct imx_sc_ipc *sc_ipc, void *msg)
* Wait for tx_done before every send to ensure that no
* queueing happens at the mailbox channel level.
*/
- wait_for_completion(&sc_chan->tx_done);
- reinit_completion(&sc_chan->tx_done);
+ if (!sc_ipc->fast_ipc) {
+ wait_for_completion(&sc_chan->tx_done);
+ reinit_completion(&sc_chan->tx_done);
+ }

ret = mbox_send_message(sc_chan->ch, &data[i]);
if (ret < 0)
@@ -246,6 +265,8 @@ static int imx_scu_probe(struct platform_device *pdev)
struct imx_sc_chan *sc_chan;
struct mbox_client *cl;
char *chan_name;
+ struct of_phandle_args args;
+ int num_channel;
int ret;
int i;

@@ -253,11 +274,20 @@ static int imx_scu_probe(struct platform_device *pdev)
if (!sc_ipc)
return -ENOMEM;

- for (i = 0; i < SCU_MU_CHAN_NUM; i++) {
- if (i < 4)
+ ret = of_parse_phandle_with_args(pdev->dev.of_node, "mboxes",
+ "#mbox-cells", 0, &args);
+ if (ret)
+ return ret;
+
+ sc_ipc->fast_ipc = of_device_is_compatible(args.np, "fsl,imx8-mu-scu");
+
+ num_channel = sc_ipc->fast_ipc ? 2 : SCU_MU_CHAN_NUM;
+ for (i = 0; i < num_channel; i++) {
+ if (i < num_channel / 2)
chan_name = kasprintf(GFP_KERNEL, "tx%d", i);
else
- chan_name = kasprintf(GFP_KERNEL, "rx%d", i - 4);
+ chan_name = kasprintf(GFP_KERNEL, "rx%d",
+ i - num_channel / 2);

if (!chan_name)
return -ENOMEM;
@@ -269,13 +299,15 @@ static int imx_scu_probe(struct platform_device *pdev)
cl->knows_txdone = true;
cl->rx_callback = imx_scu_rx_callback;

- /* Initial tx_done completion as "done" */
- cl->tx_done = imx_scu_tx_done;
- init_completion(&sc_chan->tx_done);
- complete(&sc_chan->tx_done);
+ if (!sc_ipc->fast_ipc) {
+ /* Initial tx_done completion as "done" */
+ cl->tx_done = imx_scu_tx_done;
+ init_completion(&sc_chan->tx_done);
+ complete(&sc_chan->tx_done);
+ }

sc_chan->sc_ipc = sc_ipc;
- sc_chan->idx = i % 4;
+ sc_chan->idx = i % (num_channel / 2);
sc_chan->ch = mbox_request_channel_byname(cl, chan_name);
if (IS_ERR(sc_chan->ch)) {
ret = PTR_ERR(sc_chan->ch);
--
2.16.4

2020-03-19 07:59:45

by Peng Fan

[permalink] [raw]
Subject: [PATCH V7 3/4] mailbox: imx: add SCU MU support

From: Peng Fan <[email protected]>

i.MX8/8X SCU MU is dedicated for communication between SCU and Cortex-A
cores from hardware design, and could not be reused for other purpose.

Per i.MX8/8X Reference mannual, Chapter "12.9.2.3.2 Messaging Examples",
Passing short messages: Transmit register(s) can be used to pass
short messages from one to four words in length. For example, when
a four-word message is desired, only one of the registers needs to
have its corresponding interrupt enable bit set at the receiver side;
the message’s first three words are written to the registers whose
interrupt is masked, and the fourth word is written to the other
register (which triggers an interrupt at the receiver side).

i.MX8/8X SCU firmware IPC is an implementation of passing short
messages. But current imx-mailbox driver only support one word
message, i.MX8/8X linux side firmware has to request four TX
and four RX to support IPC to SCU firmware. This is low efficent
and more interrupts triggered compared with one TX and
one RX.

To make SCU MU work,
- parse the size of msg.
- Only enable TR0/RR0 interrupt for transmit/receive message.
- For TX/RX, only support one TX channel and one RX channel
- For RX, support receive msg larger than 4 u32 words.
- Support 6 channels, TX0/RX0/RXDB[0-3], not support TXDB.

Reviewed-by: Oleksij Rempel <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
---
V7:
Add TE/RE check

V6:
Add R-b tag
Use %zu for printk sizeof

V5:
Code style cleanup
Add more debug msg
Drop __packed aligned
idx santity check in scu xlate

V4:
Added separate chans init and xlate function for SCU MU
Limit chans to TX0/RX0/RXDB[0-3], max 6 chans.
Santity check to msg size

V3:
Added scu type tx/rx and SCU MU type

drivers/mailbox/imx-mailbox.c | 155 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 155 insertions(+)

diff --git a/drivers/mailbox/imx-mailbox.c b/drivers/mailbox/imx-mailbox.c
index df6c4ecd913c..7906624a731c 100644
--- a/drivers/mailbox/imx-mailbox.c
+++ b/drivers/mailbox/imx-mailbox.c
@@ -4,8 +4,10 @@
*/

#include <linux/clk.h>
+#include <linux/firmware/imx/ipc.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/kernel.h>
#include <linux/mailbox_controller.h>
#include <linux/module.h>
@@ -27,6 +29,8 @@
#define IMX_MU_xCR_GIRn(x) BIT(16 + (3 - (x)))

#define IMX_MU_CHANS 16
+/* TX0/RX0/RXDB[0-3] */
+#define IMX_MU_SCU_CHANS 6
#define IMX_MU_CHAN_NAME_SIZE 20

enum imx_mu_chan_type {
@@ -36,6 +40,11 @@ enum imx_mu_chan_type {
IMX_MU_TYPE_RXDB, /* Rx doorbell */
};

+struct imx_sc_rpc_msg_max {
+ struct imx_sc_rpc_msg hdr;
+ u32 data[7];
+};
+
struct imx_mu_con_priv {
unsigned int idx;
char irq_desc[IMX_MU_CHAN_NAME_SIZE];
@@ -134,6 +143,83 @@ static int imx_mu_generic_rx(struct imx_mu_priv *priv,
return 0;
}

+static int imx_mu_scu_tx(struct imx_mu_priv *priv,
+ struct imx_mu_con_priv *cp,
+ void *data)
+{
+ struct imx_sc_rpc_msg_max *msg = data;
+ u32 *arg = data;
+ int i, ret;
+ u32 xsr;
+
+ switch (cp->type) {
+ case IMX_MU_TYPE_TX:
+ if (msg->hdr.size > sizeof(*msg)) {
+ /*
+ * The real message size can be different to
+ * struct imx_sc_rpc_msg_max size
+ */
+ dev_err(priv->dev, "Exceed max msg size (%zu) on TX, got: %i\n", sizeof(*msg), msg->hdr.size);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < 4 && i < msg->hdr.size; i++)
+ imx_mu_write(priv, *arg++, priv->dcfg->xTR[i % 4]);
+ for (; i < msg->hdr.size; i++) {
+ ret = readl_poll_timeout(priv->base + priv->dcfg->xSR,
+ xsr,
+ xsr & IMX_MU_xSR_TEn(i % 4),
+ 0, 100);
+ if (ret) {
+ dev_err(priv->dev, "Send data index: %d timeout\n", i);
+ return ret;
+ }
+ imx_mu_write(priv, *arg++, priv->dcfg->xTR[i % 4]);
+ }
+
+ imx_mu_xcr_rmw(priv, IMX_MU_xCR_TIEn(cp->idx), 0);
+ break;
+ default:
+ dev_warn_ratelimited(priv->dev, "Send data on wrong channel type: %d\n", cp->type);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int imx_mu_scu_rx(struct imx_mu_priv *priv,
+ struct imx_mu_con_priv *cp)
+{
+ struct imx_sc_rpc_msg_max msg;
+ u32 *data = (u32 *)&msg;
+ int i, ret;
+ u32 xsr;
+
+ imx_mu_xcr_rmw(priv, 0, IMX_MU_xCR_RIEn(0));
+ *data++ = imx_mu_read(priv, priv->dcfg->xRR[0]);
+
+ if (msg.hdr.size > sizeof(msg)) {
+ dev_err(priv->dev, "Exceed max msg size (%zu) on RX, got: %i\n",
+ sizeof(msg), msg.hdr.size);
+ return -EINVAL;
+ }
+
+ for (i = 1; i < msg.hdr.size; i++) {
+ ret = readl_poll_timeout(priv->base + priv->dcfg->xSR, xsr,
+ xsr & IMX_MU_xSR_RFn(i % 4), 0, 100);
+ if (ret) {
+ dev_err(priv->dev, "timeout read idx %d\n", i);
+ return ret;
+ }
+ *data++ = imx_mu_read(priv, priv->dcfg->xRR[i % 4]);
+ }
+
+ imx_mu_xcr_rmw(priv, IMX_MU_xCR_RIEn(0), 0);
+ mbox_chan_received_data(cp->chan, (void *)&msg);
+
+ return 0;
+}
+
static void imx_mu_txdb_tasklet(unsigned long data)
{
struct imx_mu_con_priv *cp = (struct imx_mu_con_priv *)data;
@@ -263,6 +349,42 @@ static const struct mbox_chan_ops imx_mu_ops = {
.shutdown = imx_mu_shutdown,
};

+static struct mbox_chan *imx_mu_scu_xlate(struct mbox_controller *mbox,
+ const struct of_phandle_args *sp)
+{
+ u32 type, idx, chan;
+
+ if (sp->args_count != 2) {
+ dev_err(mbox->dev, "Invalid argument count %d\n", sp->args_count);
+ return ERR_PTR(-EINVAL);
+ }
+
+ type = sp->args[0]; /* channel type */
+ idx = sp->args[1]; /* index */
+
+ switch (type) {
+ case IMX_MU_TYPE_TX:
+ case IMX_MU_TYPE_RX:
+ if (idx != 0)
+ dev_err(mbox->dev, "Invalid chan idx: %d\n", idx);
+ chan = type;
+ break;
+ case IMX_MU_TYPE_RXDB:
+ chan = 2 + idx;
+ break;
+ default:
+ dev_err(mbox->dev, "Invalid chan type: %d\n", type);
+ return NULL;
+ }
+
+ if (chan >= mbox->num_chans) {
+ dev_err(mbox->dev, "Not supported channel number: %d. (type: %d, idx: %d)\n", chan, type, idx);
+ return ERR_PTR(-EINVAL);
+ }
+
+ return &mbox->chans[chan];
+}
+
static struct mbox_chan * imx_mu_xlate(struct mbox_controller *mbox,
const struct of_phandle_args *sp)
{
@@ -310,6 +432,28 @@ static void imx_mu_init_generic(struct imx_mu_priv *priv)
imx_mu_write(priv, 0, priv->dcfg->xCR);
}

+static void imx_mu_init_scu(struct imx_mu_priv *priv)
+{
+ unsigned int i;
+
+ for (i = 0; i < IMX_MU_SCU_CHANS; i++) {
+ struct imx_mu_con_priv *cp = &priv->con_priv[i];
+
+ cp->idx = i < 2 ? 0 : i - 2;
+ cp->type = i < 2 ? i : IMX_MU_TYPE_RXDB;
+ cp->chan = &priv->mbox_chans[i];
+ priv->mbox_chans[i].con_priv = cp;
+ snprintf(cp->irq_desc, sizeof(cp->irq_desc),
+ "imx_mu_chan[%i-%i]", cp->type, cp->idx);
+ }
+
+ priv->mbox.num_chans = IMX_MU_SCU_CHANS;
+ priv->mbox.of_xlate = imx_mu_scu_xlate;
+
+ /* Set default MU configuration */
+ imx_mu_write(priv, 0, priv->dcfg->xCR);
+}
+
static int imx_mu_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -396,9 +540,20 @@ static const struct imx_mu_dcfg imx_mu_cfg_imx7ulp = {
.xCR = 0x64,
};

+static const struct imx_mu_dcfg imx_mu_cfg_imx8_scu = {
+ .tx = imx_mu_scu_tx,
+ .rx = imx_mu_scu_rx,
+ .init = imx_mu_init_scu,
+ .xTR = {0x0, 0x4, 0x8, 0xc},
+ .xRR = {0x10, 0x14, 0x18, 0x1c},
+ .xSR = 0x20,
+ .xCR = 0x24,
+};
+
static const struct of_device_id imx_mu_dt_ids[] = {
{ .compatible = "fsl,imx7ulp-mu", .data = &imx_mu_cfg_imx7ulp },
{ .compatible = "fsl,imx6sx-mu", .data = &imx_mu_cfg_imx6sx },
+ { .compatible = "fsl,imx8-mu-scu", .data = &imx_mu_cfg_imx8_scu },
{ },
};
MODULE_DEVICE_TABLE(of, imx_mu_dt_ids);
--
2.16.4

2020-03-20 13:36:57

by Oleksij Rempel

[permalink] [raw]
Subject: Re: [PATCH V7 3/4] mailbox: imx: add SCU MU support

On Thu, Mar 19, 2020 at 03:49:52PM +0800, [email protected] wrote:
> From: Peng Fan <[email protected]>
>
> i.MX8/8X SCU MU is dedicated for communication between SCU and Cortex-A
> cores from hardware design, and could not be reused for other purpose.
>
> Per i.MX8/8X Reference mannual, Chapter "12.9.2.3.2 Messaging Examples",
> Passing short messages: Transmit register(s) can be used to pass
> short messages from one to four words in length. For example, when
> a four-word message is desired, only one of the registers needs to
> have its corresponding interrupt enable bit set at the receiver side;
> the message’s first three words are written to the registers whose
> interrupt is masked, and the fourth word is written to the other
> register (which triggers an interrupt at the receiver side).
>
> i.MX8/8X SCU firmware IPC is an implementation of passing short
> messages. But current imx-mailbox driver only support one word
> message, i.MX8/8X linux side firmware has to request four TX
> and four RX to support IPC to SCU firmware. This is low efficent
> and more interrupts triggered compared with one TX and
> one RX.
>
> To make SCU MU work,
> - parse the size of msg.
> - Only enable TR0/RR0 interrupt for transmit/receive message.
> - For TX/RX, only support one TX channel and one RX channel
> - For RX, support receive msg larger than 4 u32 words.
> - Support 6 channels, TX0/RX0/RXDB[0-3], not support TXDB.
>
> Reviewed-by: Oleksij Rempel <[email protected]>
> Signed-off-by: Peng Fan <[email protected]>

Looks ok.

Thank you

> ---
> V7:
> Add TE/RE check
>
> V6:
> Add R-b tag
> Use %zu for printk sizeof
>
> V5:
> Code style cleanup
> Add more debug msg
> Drop __packed aligned
> idx santity check in scu xlate
>
> V4:
> Added separate chans init and xlate function for SCU MU
> Limit chans to TX0/RX0/RXDB[0-3], max 6 chans.
> Santity check to msg size
>
> V3:
> Added scu type tx/rx and SCU MU type
>
> drivers/mailbox/imx-mailbox.c | 155 ++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 155 insertions(+)
>
> diff --git a/drivers/mailbox/imx-mailbox.c b/drivers/mailbox/imx-mailbox.c
> index df6c4ecd913c..7906624a731c 100644
> --- a/drivers/mailbox/imx-mailbox.c
> +++ b/drivers/mailbox/imx-mailbox.c
> @@ -4,8 +4,10 @@
> */
>
> #include <linux/clk.h>
> +#include <linux/firmware/imx/ipc.h>
> #include <linux/interrupt.h>
> #include <linux/io.h>
> +#include <linux/iopoll.h>
> #include <linux/kernel.h>
> #include <linux/mailbox_controller.h>
> #include <linux/module.h>
> @@ -27,6 +29,8 @@
> #define IMX_MU_xCR_GIRn(x) BIT(16 + (3 - (x)))
>
> #define IMX_MU_CHANS 16
> +/* TX0/RX0/RXDB[0-3] */
> +#define IMX_MU_SCU_CHANS 6
> #define IMX_MU_CHAN_NAME_SIZE 20
>
> enum imx_mu_chan_type {
> @@ -36,6 +40,11 @@ enum imx_mu_chan_type {
> IMX_MU_TYPE_RXDB, /* Rx doorbell */
> };
>
> +struct imx_sc_rpc_msg_max {
> + struct imx_sc_rpc_msg hdr;
> + u32 data[7];
> +};
> +
> struct imx_mu_con_priv {
> unsigned int idx;
> char irq_desc[IMX_MU_CHAN_NAME_SIZE];
> @@ -134,6 +143,83 @@ static int imx_mu_generic_rx(struct imx_mu_priv *priv,
> return 0;
> }
>
> +static int imx_mu_scu_tx(struct imx_mu_priv *priv,
> + struct imx_mu_con_priv *cp,
> + void *data)
> +{
> + struct imx_sc_rpc_msg_max *msg = data;
> + u32 *arg = data;
> + int i, ret;
> + u32 xsr;
> +
> + switch (cp->type) {
> + case IMX_MU_TYPE_TX:
> + if (msg->hdr.size > sizeof(*msg)) {
> + /*
> + * The real message size can be different to
> + * struct imx_sc_rpc_msg_max size
> + */
> + dev_err(priv->dev, "Exceed max msg size (%zu) on TX, got: %i\n", sizeof(*msg), msg->hdr.size);
> + return -EINVAL;
> + }
> +
> + for (i = 0; i < 4 && i < msg->hdr.size; i++)
> + imx_mu_write(priv, *arg++, priv->dcfg->xTR[i % 4]);
> + for (; i < msg->hdr.size; i++) {
> + ret = readl_poll_timeout(priv->base + priv->dcfg->xSR,
> + xsr,
> + xsr & IMX_MU_xSR_TEn(i % 4),
> + 0, 100);
> + if (ret) {
> + dev_err(priv->dev, "Send data index: %d timeout\n", i);
> + return ret;
> + }
> + imx_mu_write(priv, *arg++, priv->dcfg->xTR[i % 4]);
> + }
> +
> + imx_mu_xcr_rmw(priv, IMX_MU_xCR_TIEn(cp->idx), 0);
> + break;
> + default:
> + dev_warn_ratelimited(priv->dev, "Send data on wrong channel type: %d\n", cp->type);
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int imx_mu_scu_rx(struct imx_mu_priv *priv,
> + struct imx_mu_con_priv *cp)
> +{
> + struct imx_sc_rpc_msg_max msg;
> + u32 *data = (u32 *)&msg;
> + int i, ret;
> + u32 xsr;
> +
> + imx_mu_xcr_rmw(priv, 0, IMX_MU_xCR_RIEn(0));
> + *data++ = imx_mu_read(priv, priv->dcfg->xRR[0]);
> +
> + if (msg.hdr.size > sizeof(msg)) {
> + dev_err(priv->dev, "Exceed max msg size (%zu) on RX, got: %i\n",
> + sizeof(msg), msg.hdr.size);
> + return -EINVAL;
> + }
> +
> + for (i = 1; i < msg.hdr.size; i++) {
> + ret = readl_poll_timeout(priv->base + priv->dcfg->xSR, xsr,
> + xsr & IMX_MU_xSR_RFn(i % 4), 0, 100);
> + if (ret) {
> + dev_err(priv->dev, "timeout read idx %d\n", i);
> + return ret;
> + }
> + *data++ = imx_mu_read(priv, priv->dcfg->xRR[i % 4]);
> + }
> +
> + imx_mu_xcr_rmw(priv, IMX_MU_xCR_RIEn(0), 0);
> + mbox_chan_received_data(cp->chan, (void *)&msg);
> +
> + return 0;
> +}
> +
> static void imx_mu_txdb_tasklet(unsigned long data)
> {
> struct imx_mu_con_priv *cp = (struct imx_mu_con_priv *)data;
> @@ -263,6 +349,42 @@ static const struct mbox_chan_ops imx_mu_ops = {
> .shutdown = imx_mu_shutdown,
> };
>
> +static struct mbox_chan *imx_mu_scu_xlate(struct mbox_controller *mbox,
> + const struct of_phandle_args *sp)
> +{
> + u32 type, idx, chan;
> +
> + if (sp->args_count != 2) {
> + dev_err(mbox->dev, "Invalid argument count %d\n", sp->args_count);
> + return ERR_PTR(-EINVAL);
> + }
> +
> + type = sp->args[0]; /* channel type */
> + idx = sp->args[1]; /* index */
> +
> + switch (type) {
> + case IMX_MU_TYPE_TX:
> + case IMX_MU_TYPE_RX:
> + if (idx != 0)
> + dev_err(mbox->dev, "Invalid chan idx: %d\n", idx);
> + chan = type;
> + break;
> + case IMX_MU_TYPE_RXDB:
> + chan = 2 + idx;
> + break;
> + default:
> + dev_err(mbox->dev, "Invalid chan type: %d\n", type);
> + return NULL;
> + }
> +
> + if (chan >= mbox->num_chans) {
> + dev_err(mbox->dev, "Not supported channel number: %d. (type: %d, idx: %d)\n", chan, type, idx);
> + return ERR_PTR(-EINVAL);
> + }
> +
> + return &mbox->chans[chan];
> +}
> +
> static struct mbox_chan * imx_mu_xlate(struct mbox_controller *mbox,
> const struct of_phandle_args *sp)
> {
> @@ -310,6 +432,28 @@ static void imx_mu_init_generic(struct imx_mu_priv *priv)
> imx_mu_write(priv, 0, priv->dcfg->xCR);
> }
>
> +static void imx_mu_init_scu(struct imx_mu_priv *priv)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < IMX_MU_SCU_CHANS; i++) {
> + struct imx_mu_con_priv *cp = &priv->con_priv[i];
> +
> + cp->idx = i < 2 ? 0 : i - 2;
> + cp->type = i < 2 ? i : IMX_MU_TYPE_RXDB;
> + cp->chan = &priv->mbox_chans[i];
> + priv->mbox_chans[i].con_priv = cp;
> + snprintf(cp->irq_desc, sizeof(cp->irq_desc),
> + "imx_mu_chan[%i-%i]", cp->type, cp->idx);
> + }
> +
> + priv->mbox.num_chans = IMX_MU_SCU_CHANS;
> + priv->mbox.of_xlate = imx_mu_scu_xlate;
> +
> + /* Set default MU configuration */
> + imx_mu_write(priv, 0, priv->dcfg->xCR);
> +}
> +
> static int imx_mu_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> @@ -396,9 +540,20 @@ static const struct imx_mu_dcfg imx_mu_cfg_imx7ulp = {
> .xCR = 0x64,
> };
>
> +static const struct imx_mu_dcfg imx_mu_cfg_imx8_scu = {
> + .tx = imx_mu_scu_tx,
> + .rx = imx_mu_scu_rx,
> + .init = imx_mu_init_scu,
> + .xTR = {0x0, 0x4, 0x8, 0xc},
> + .xRR = {0x10, 0x14, 0x18, 0x1c},
> + .xSR = 0x20,
> + .xCR = 0x24,
> +};
> +
> static const struct of_device_id imx_mu_dt_ids[] = {
> { .compatible = "fsl,imx7ulp-mu", .data = &imx_mu_cfg_imx7ulp },
> { .compatible = "fsl,imx6sx-mu", .data = &imx_mu_cfg_imx6sx },
> + { .compatible = "fsl,imx8-mu-scu", .data = &imx_mu_cfg_imx8_scu },
> { },
> };
> MODULE_DEVICE_TABLE(of, imx_mu_dt_ids);
> --
> 2.16.4
>
>

--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

2020-03-31 13:35:43

by Peng Fan

[permalink] [raw]
Subject: RE: [PATCH V7 0/4] mailbox/firmware: imx: support SCU channel type

Hi Jassi,

> Subject: [PATCH V7 0/4] mailbox/firmware: imx: support SCU channel type

Are you ok with the mailbox part?

Thanks,
Peng.

>
> From: Peng Fan <[email protected]>
>
> V7:
> Per Leonard's comments, added check for TE/RE Passed test from
> Leonard's https://github.com/cdleonard/imx-scu-test
>
> V6:
> Add Oleksij's R-b tag
> Patch 3/4, per
> https://www.kernel.org/doc/Documentation/printk-formats.txt
> should use %zu for printk sizeof
>
> V5:
> Move imx_mu_dcfg below imx_mu_priv
> Add init hooks to imx_mu_dcfg
> drop __packed __aligned
> Add more debug msg
> code style cleanup
>
> V4:
> Drop IMX_MU_TYPE_[GENERIC, SCU]
> Pack MU chans init to separate function Add separate function for SCU
> chans init and xlate Add santity check to msg hdr.size Limit SCU MU chans
> to 6, TX0/RX0/RXDB[0-3]
>
> V3:
> Rebase to Shawn's for-next
> Include fsl,imx8-mu-scu compatible
> Per Oleksij's comments, introduce generic tx/rx and added scu mu type
> Check fsl,imx8-mu-scu in firmware driver for fast_ipc
>
> V2:
> Drop patch 1/3 which added fsl,scu property Force to use scu channel type
> when machine has node compatible "fsl,imx-scu"
> Force imx-scu to use fast_ipc
>
> I not found a generic method to make SCFW message generic enough, SCFW
> message is not fixed length including TX and RX. And it use TR0/RR0
> interrupt.
>
> V1:
> Sorry to bind the mailbox/firmware patch together. This is make it to
> understand what changed to support using 1 TX and 1 RX channel for SCFW
> message.
>
> Per i.MX8QXP Reference mannual, there are several message using examples.
> One of them is:
> Passing short messages: Transmit register(s) can be used to pass short
> messages from one to four words in length. For example, when a four-word
> message is desired, only one of the registers needs to have its corresponding
> interrupt enable bit set at the receiver side.
>
> This patchset is to using this for SCFW message to replace four TX and four RX
> method.
>
> Peng Fan (4):
> dt-bindings: mailbox: imx-mu: add SCU MU support
> mailbox: imx: restructure code to make easy for new MU
> mailbox: imx: add SCU MU support
> firmware: imx-scu: Support one TX and one RX
>
> .../devicetree/bindings/mailbox/fsl,mu.txt | 2 +
> drivers/firmware/imx/imx-scu.c | 54 +++-
> drivers/mailbox/imx-mailbox.c | 288
> +++++++++++++++++----
> 3 files changed, 281 insertions(+), 63 deletions(-)
>
>
> base-commit: e506dba69a5e9aaff20fd73a108639f84e2c39d9
> --
> 2.16.4

2020-04-01 04:25:09

by Jassi Brar

[permalink] [raw]
Subject: Re: [PATCH V7 0/4] mailbox/firmware: imx: support SCU channel type

On Tue, Mar 31, 2020 at 8:34 AM Peng Fan <[email protected]> wrote:
>
> Hi Jassi,
>
> > Subject: [PATCH V7 0/4] mailbox/firmware: imx: support SCU channel type
>
> Are you ok with the mailbox part?
>
Is there anything you think I might have overlooked?
I already queued the three patches...
dt-bindings: mailbox: imx-mu: add SCU MU support
mailbox: imx: restructure code to make easy for new MU
mailbox: imx: add SCU MU support

Cheers!

2020-04-01 05:43:10

by Peng Fan

[permalink] [raw]
Subject: RE: [PATCH V7 0/4] mailbox/firmware: imx: support SCU channel type

> Subject: Re: [PATCH V7 0/4] mailbox/firmware: imx: support SCU channel
> type
>
> On Tue, Mar 31, 2020 at 8:34 AM Peng Fan <[email protected]> wrote:
> >
> > Hi Jassi,
> >
> > > Subject: [PATCH V7 0/4] mailbox/firmware: imx: support SCU channel
> type
> >
> > Are you ok with the mailbox part?
> >
> Is there anything you think I might have overlooked?
> I already queued the three patches...
> dt-bindings: mailbox: imx-mu: add SCU MU support
> mailbox: imx: restructure code to make easy for new MU
> mailbox: imx: add SCU MU support

Sorry, I forgot to check your tree before ask.

Thanks,
Peng.

>
> Cheers!

2020-04-20 15:16:14

by Shawn Guo

[permalink] [raw]
Subject: Re: [PATCH V7 4/4] firmware: imx-scu: Support one TX and one RX

On Thu, Mar 19, 2020 at 03:49:53PM +0800, [email protected] wrote:
> From: Peng Fan <[email protected]>
>
> Current imx-scu requires four TX and four RX to communicate with
> SCU. This is low efficient and causes lots of mailbox interrupts.
>
> With imx-mailbox driver could support one TX to use all four transmit
> registers and one RX to use all four receive registers, imx-scu
> could use one TX and one RX.
>
> Signed-off-by: Peng Fan <[email protected]>

Applied, thanks.