Add the OPP table for the Mali Bifrost GPU and drop the hardcoded
initial clock configuration. This enables GPU DVFS and thus saves power
when the GPU is not in use while still being able switch to a higher
clock on demand.
Signed-off-by: Martin Blumenstingl <[email protected]>
---
.../boot/dts/amlogic/meson-g12-common.dtsi | 49 +++++++++++++------
1 file changed, 34 insertions(+), 15 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 0882ea215b88..3f2c7d0802af 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -52,6 +52,39 @@ efuse: efuse {
secure-monitor = <&sm>;
};
+ gpu_opp_table: gpu-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-124999998 {
+ opp-hz = /bits/ 64 <124999998>;
+ opp-microvolt = <800000>;
+ };
+ opp-249999996 {
+ opp-hz = /bits/ 64 <249999996>;
+ opp-microvolt = <800000>;
+ };
+ opp-285714281 {
+ opp-hz = /bits/ 64 <285714281>;
+ opp-microvolt = <800000>;
+ };
+ opp-399999994 {
+ opp-hz = /bits/ 64 <399999994>;
+ opp-microvolt = <800000>;
+ };
+ opp-499999992 {
+ opp-hz = /bits/ 64 <499999992>;
+ opp-microvolt = <800000>;
+ };
+ opp-666666656 {
+ opp-hz = /bits/ 64 <666666656>;
+ opp-microvolt = <800000>;
+ };
+ opp-799999987 {
+ opp-hz = /bits/ 64 <799999987>;
+ opp-microvolt = <800000>;
+ };
+ };
+
psci {
compatible = "arm,psci-1.0";
method = "smc";
@@ -2349,21 +2382,7 @@ mali: gpu@ffe40000 {
interrupt-names = "job", "mmu", "gpu";
clocks = <&clkc CLKID_MALI>;
resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>;
-
- /*
- * Mali clocking is provided by two identical clock paths
- * MALI_0 and MALI_1 muxed to a single clock by a glitch
- * free mux to safely change frequency while running.
- */
- assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
- <&clkc CLKID_MALI_0>,
- <&clkc CLKID_MALI>; /* Glitch free mux */
- assigned-clock-parents = <&clkc CLKID_FCLK_DIV2P5>,
- <0>, /* Do Nothing */
- <&clkc CLKID_MALI_0>;
- assigned-clock-rates = <0>, /* Do Nothing */
- <800000000>,
- <0>; /* Do Nothing */
+ operating-points-v2 = <&gpu_opp_table>;
#cooling-cells = <2>;
};
};
--
2.26.0