2020-04-05 19:24:48

by Oleksandr Suvorov

[permalink] [raw]
Subject: [RFC PATCH v2 6/6] arm: dts: pwm: replace flag 0 with PWM_NOFLAGS

The raw value '0' in the 3rd cell of the "pwms" property means there are
no flags to be set.

This patch converts '0' value into PWM_NOFLAGS.

Signed-off-by: Oleksandr Suvorov <[email protected]>
---

Changes in v2:
- remove the driver part of patchset as dangerous and senseless.
- use PWM_NOFLAGS instead of PWM_POLARITY_NORMAL to avoid possible
conflict with enum pwm_polarity in <linux/pwm.h>. Also, this name
reflects the sense of this value more precisely.

arch/arm/boot/dts/am335x-cm-t335.dts | 2 +-
arch/arm/boot/dts/am335x-evm.dts | 2 +-
arch/arm/boot/dts/am3517-evm.dts | 2 +-
arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi | 2 +-
arch/arm/boot/dts/at91-kizbox2-common.dtsi | 6 +++---
arch/arm/boot/dts/at91-kizbox3_common.dtsi | 8 ++++----
arch/arm/boot/dts/at91-kizboxmini-common.dtsi | 6 +++---
arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 2 +-
arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts | 2 +-
arch/arm/boot/dts/at91sam9n12ek.dts | 2 +-
arch/arm/boot/dts/at91sam9x5dm.dtsi | 2 +-
arch/arm/boot/dts/berlin2cd-google-chromecast.dts | 4 ++--
arch/arm/boot/dts/da850-evm.dts | 2 +-
arch/arm/boot/dts/da850-lego-ev3.dts | 4 ++--
arch/arm/boot/dts/exynos4412-midas.dtsi | 2 +-
arch/arm/boot/dts/exynos4412-odroidu3.dts | 2 +-
arch/arm/boot/dts/exynos5250-snow-common.dtsi | 2 +-
arch/arm/boot/dts/exynos5410-odroidxu.dts | 2 +-
arch/arm/boot/dts/exynos5420-peach-pit.dts | 2 +-
arch/arm/boot/dts/exynos5422-odroidhc1.dts | 2 +-
arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 2 +-
arch/arm/boot/dts/exynos5422-odroidxu4.dts | 2 +-
arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi | 4 ++--
arch/arm/boot/dts/exynos5800-peach-pi.dts | 2 +-
arch/arm/boot/dts/imx53-tx53-x13x.dts | 5 +++--
arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts | 2 +-
arch/arm/boot/dts/imx6q-display5.dtsi | 2 +-
arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts | 2 +-
arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts | 2 +-
arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi | 4 ++--
arch/arm/boot/dts/imx7-colibri.dtsi | 4 +++-
arch/arm/boot/dts/imx7d-nitrogen7.dts | 3 ++-
arch/arm/boot/dts/imx7d-pico.dtsi | 3 ++-
arch/arm/boot/dts/imx7d-sdb.dts | 3 ++-
arch/arm/boot/dts/imx7ulp-evk.dts | 3 ++-
arch/arm/boot/dts/iwg20d-q7-common.dtsi | 2 +-
arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi | 2 +-
arch/arm/boot/dts/meson8b-ec100.dts | 4 ++--
arch/arm/boot/dts/meson8b-mxq.dts | 4 ++--
arch/arm/boot/dts/meson8b-odroidc1.dts | 4 ++--
arch/arm/boot/dts/motorola-mapphone-common.dtsi | 3 ++-
arch/arm/boot/dts/omap3-gta04.dtsi | 2 +-
arch/arm/boot/dts/omap3-n900.dts | 2 +-
arch/arm/boot/dts/rk3288-veyron-edp.dtsi | 2 +-
arch/arm/boot/dts/rk3288-veyron.dtsi | 2 +-
arch/arm/boot/dts/rv1108-evb.dts | 2 +-
arch/arm/boot/dts/s3c6410-mini6410.dts | 2 +-
arch/arm/boot/dts/s5pv210-aries.dtsi | 2 +-
arch/arm/boot/dts/s5pv210-smdkv210.dts | 2 +-
arch/arm/boot/dts/sun5i-gr8-evb.dts | 2 +-
arch/arm/boot/dts/vf-colibri.dtsi | 4 +++-
51 files changed, 76 insertions(+), 66 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts
index c6fe9db660e2..5ccca3c3e243 100644
--- a/arch/arm/boot/dts/am335x-cm-t335.dts
+++ b/arch/arm/boot/dts/am335x-cm-t335.dts
@@ -48,7 +48,7 @@ vwlan_fixed: fixedregulator2 {

backlight {
compatible = "pwm-backlight";
- pwms = <&ecap0 0 50000 0>;
+ pwms = <&ecap0 0 50000 PWM_NOFLAGS>;
brightness-levels = <0 51 53 56 62 75 101 152 255>;
default-brightness-level = <8>;
};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 68252dab32c3..c9f351e27c2d 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -115,7 +115,7 @@ switch10 {

backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&ecap0 0 50000 0>;
+ pwms = <&ecap0 0 50000 PWM_NOFLAGS>;
brightness-levels = <0 51 53 56 62 75 101 152 255>;
default-brightness-level = <8>;
};
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
index a1fd3e63e86e..02fa18ae499b 100644
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -144,7 +144,7 @@ bl: backlight {
pinctrl-names = "default";
power-supply = <&vdd_io_reg>;
pinctrl-0 = <&backlight_pins>;
- pwms = <&pwm11 0 5000000 0>;
+ pwms = <&pwm11 0 5000000 PWM_NOFLAGS>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <7>;
enable-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio_182 */
diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
index bea920b192b6..e20ba0f6f759 100644
--- a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
+++ b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
@@ -10,7 +10,7 @@
/ {
backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&hlcdc_pwm 0 50000 0>;
+ pwms = <&hlcdc_pwm 0 50000 PWM_NOFLAGS>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
status = "okay";
diff --git a/arch/arm/boot/dts/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
index af38253a6e7a..12c78f47e56a 100644
--- a/arch/arm/boot/dts/at91-kizbox2-common.dtsi
+++ b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
@@ -63,21 +63,21 @@ pwm_leds {

blue {
label = "pwm:blue:user";
- pwms = <&pwm0 2 10000000 0>;
+ pwms = <&pwm0 2 10000000 PWM_NOFLAGS>;
max-brightness = <255>;
linux,default-trigger = "none";
};

green {
label = "pwm:green:user";
- pwms = <&pwm0 1 10000000 0>;
+ pwms = <&pwm0 1 10000000 PWM_NOFLAGS>;
max-brightness = <255>;
linux,default-trigger = "default-on";
};

red {
label = "pwm:red:user";
- pwms = <&pwm0 0 10000000 0>;
+ pwms = <&pwm0 0 10000000 PWM_NOFLAGS>;
max-brightness = <255>;
linux,default-trigger = "default-on";
};
diff --git a/arch/arm/boot/dts/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
index 299e74d23184..ca3121c5a80b 100644
--- a/arch/arm/boot/dts/at91-kizbox3_common.dtsi
+++ b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
@@ -73,7 +73,7 @@ &pinctrl_pwm0_pwm_h2

red {
label = "pwm:red:user";
- pwms = <&pwm0 0 10000000 0>;
+ pwms = <&pwm0 0 10000000 PWM_NOFLAGS>;
max-brightness = <255>;
linux,default-trigger = "default-on";
status = "disabled";
@@ -81,7 +81,7 @@ red {

green {
label = "pwm:green:user";
- pwms = <&pwm0 1 10000000 0>;
+ pwms = <&pwm0 1 10000000 PWM_NOFLAGS>;
max-brightness = <255>;
linux,default-trigger = "default-on";
status = "disabled";
@@ -89,14 +89,14 @@ green {

blue {
label = "pwm:blue:user";
- pwms = <&pwm0 2 10000000 0>;
+ pwms = <&pwm0 2 10000000 PWM_NOFLAGS>;
max-brightness = <255>;
status = "disabled";
};

white {
label = "pwm:white:user";
- pwms = <&pwm0 3 10000000 0>;
+ pwms = <&pwm0 3 10000000 PWM_NOFLAGS>;
max-brightness = <255>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
index fddf267b2d17..09a8f3dc378e 100644
--- a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
+++ b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
@@ -59,7 +59,7 @@ leds: pwm_leds {

led_blue: pwm_blue {
label = "pwm:blue:user";
- pwms = <&pwm0 2 10000000 0>;
+ pwms = <&pwm0 2 10000000 PWM_NOFLAGS>;
max-brightness = <255>;
linux,default-trigger = "none";
status = "disabled";
@@ -67,14 +67,14 @@ led_blue: pwm_blue {

led_green: pwm_green {
label = "pwm:green:user";
- pwms = <&pwm0 0 10000000 0>;
+ pwms = <&pwm0 0 10000000 PWM_NOFLAGS>;
max-brightness = <255>;
linux,default-trigger = "default-on";
};

led_red: pwm_red {
label = "pwm:red:user";
- pwms = <&pwm0 1 10000000 0>;
+ pwms = <&pwm0 1 10000000 PWM_NOFLAGS>;
max-brightness = <255>;
linux,default-trigger = "default-on";
};
diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
index 4f123477e631..ac6465117ee2 100644
--- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
+++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
@@ -42,7 +42,7 @@ bl_reg: backlight-regulator {

panel_bl: backlight {
compatible = "pwm-backlight";
- pwms = <&hlcdc_pwm 0 100000 0>;
+ pwms = <&hlcdc_pwm 0 100000 PWM_NOFLAGS>;

brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
index 4d7cee569ff2..b7928c738f9a 100644
--- a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
@@ -105,7 +105,7 @@ pinctrl_usba_vbus: usba_vbus {

backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&hlcdc_pwm 0 50000 0>;
+ pwms = <&hlcdc_pwm 0 50000 PWM_NOFLAGS>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
status = "okay";
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index d36e162a8817..d317e9178036 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -189,7 +189,7 @@ usb0: ohci@500000 {

backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&hlcdc_pwm 0 50000 0>;
+ pwms = <&hlcdc_pwm 0 50000 PWM_NOFLAGS>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
power-supply = <&bl_reg>;
diff --git a/arch/arm/boot/dts/at91sam9x5dm.dtsi b/arch/arm/boot/dts/at91sam9x5dm.dtsi
index a9278038af3b..e4e124025f76 100644
--- a/arch/arm/boot/dts/at91sam9x5dm.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5dm.dtsi
@@ -11,7 +11,7 @@
/ {
backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&hlcdc_pwm 0 50000 0>;
+ pwms = <&hlcdc_pwm 0 50000 PWM_NOFLAGS>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
power-supply = <&bl_reg>;
diff --git a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
index 56fa951bc86f..2ad7b60c73f1 100644
--- a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
+++ b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
@@ -41,14 +41,14 @@ leds {

white {
label = "white";
- pwms = <&pwm 0 600000 0>;
+ pwms = <&pwm 0 600000 PWM_NOFLAGS>;
max-brightness = <255>;
linux,default-trigger = "default-on";
};

red {
label = "red";
- pwms = <&pwm 1 600000 0>;
+ pwms = <&pwm 1 600000 PWM_NOFLAGS>;
max-brightness = <255>;
};
};
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index f2e7609e5346..50c7d79da6b9 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -34,7 +34,7 @@ backlight: backlight-pwm {
* schematic needs to be 1015171 (15 March 2010), Rev A
* or newer.
*/
- pwms = <&ecap2 0 50000 0>;
+ pwms = <&ecap2 0 50000 PWM_NOFLAGS>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>;
default-brightness-level = <7>;
};
diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts
index afd04a423856..407ea61615e2 100644
--- a/arch/arm/boot/dts/da850-lego-ev3.dts
+++ b/arch/arm/boot/dts/da850-lego-ev3.dts
@@ -118,7 +118,7 @@ sound {
compatible = "pwm-beeper";
pinctrl-names = "default";
pinctrl-0 = <&ehrpwm0b_pins>;
- pwms = <&ehrpwm0 1 1000000 0>;
+ pwms = <&ehrpwm0 1 1000000 PWM_NOFLAGS>;
amp-supply = <&amp>;
};

@@ -185,7 +185,7 @@ bt_slow_clk: bt-clock {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
- pwms = <&ecap2 0 30518 0>;
+ pwms = <&ecap2 0 30518 PWM_NOFLAGS>;
};

/* ARM local RAM */
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index 2c8111c6b065..aaf26b7e8b7b 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -172,7 +172,7 @@ charger_reg: CHARGER {
max77693_haptic {
compatible = "maxim,max77693-haptic";
haptic-supply = <&ldo26_reg>;
- pwms = <&pwm 0 38022 0>;
+ pwms = <&pwm 0 38022 PWM_NOFLAGS>;
};

charger {
diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
index 8ff243ba4542..7b9799f814ee 100644
--- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
@@ -33,7 +33,7 @@ led1 {

fan0: pwm-fan {
compatible = "pwm-fan";
- pwms = <&pwm 0 10000 0>;
+ pwms = <&pwm 0 10000 PWM_NOFLAGS>;
#cooling-cells = <2>;
cooling-levels = <0 102 170 230>;
};
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index c952a615148e..801c56e7cc8b 100644
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -196,7 +196,7 @@ xxti {

backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 0 1000000 0>;
+ pwms = <&pwm 0 1000000 PWM_NOFLAGS>;
brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
default-brightness-level = <7>;
enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
index 4f9297ae0763..201281b56ef2 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -37,7 +37,7 @@ emmc_pwrseq: pwrseq {

fan0: pwm-fan {
compatible = "pwm-fan";
- pwms = <&pwm 0 20972 0>;
+ pwms = <&pwm 0 20972 PWM_NOFLAGS>;
#cooling-cells = <2>;
cooling-levels = <0 130 170 230>;
};
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 2bcbdf8a39bf..0d832df21959 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -34,7 +34,7 @@ aliases {

backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 0 1000000 0>;
+ pwms = <&pwm 0 1000000 PWM_NOFLAGS>;
brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
default-brightness-level = <7>;
power-supply = <&tps65090_fet1>;
diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
index 812659260278..0b7a6b4a2fd0 100644
--- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
@@ -20,7 +20,7 @@ pwmleds {

blueled {
label = "blue:heartbeat";
- pwms = <&pwm 2 2000000 0>;
+ pwms = <&pwm 2 2000000 PWM_NOFLAGS>;
pwm-names = "pwm2";
max_brightness = <255>;
linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 5da2d81e3be2..548b5e95e51e 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -43,7 +43,7 @@ emmc_pwrseq: pwrseq {

fan0: pwm-fan {
compatible = "pwm-fan";
- pwms = <&pwm 0 20972 0>;
+ pwms = <&pwm 0 20972 PWM_NOFLAGS>;
#cooling-cells = <2>;
cooling-levels = <0 130 170 230>;
};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
index 892d389d6d09..e55534158ddf 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu4.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
@@ -22,7 +22,7 @@ pwmleds {

blueled {
label = "blue:heartbeat";
- pwms = <&pwm 2 2000000 0>;
+ pwms = <&pwm 2 2000000 PWM_NOFLAGS>;
pwm-names = "pwm2";
max_brightness = <255>;
linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
index 56acd832f0b3..a26e864262cb 100644
--- a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
+++ b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
@@ -16,7 +16,7 @@ pwmleds {

greenled {
label = "green:mmc0";
- pwms = <&pwm 1 2000000 0>;
+ pwms = <&pwm 1 2000000 PWM_NOFLAGS>;
pwm-names = "pwm1";
/*
* Green LED is much brighter than the others
@@ -28,7 +28,7 @@ greenled {

blueled {
label = "blue:heartbeat";
- pwms = <&pwm 2 2000000 0>;
+ pwms = <&pwm 2 2000000 PWM_NOFLAGS>;
pwm-names = "pwm2";
max_brightness = <255>;
linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 60ab0effe474..8590b2c21332 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -32,7 +32,7 @@ aliases {

backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 0 1000000 0>;
+ pwms = <&pwm 0 1000000 PWM_NOFLAGS>;
brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
default-brightness-level = <7>;
enable-gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/imx53-tx53-x13x.dts b/arch/arm/boot/dts/imx53-tx53-x13x.dts
index 6cdf2082c742..3e7374d1f092 100644
--- a/arch/arm/boot/dts/imx53-tx53-x13x.dts
+++ b/arch/arm/boot/dts/imx53-tx53-x13x.dts
@@ -48,6 +48,7 @@
/dts-v1/;
#include "imx53-tx53.dtsi"
#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>

/ {
model = "Ka-Ro electronics TX53 module (LVDS)";
@@ -61,7 +62,7 @@ aliases {

backlight0: backlight0 {
compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 0>;
+ pwms = <&pwm2 0 500000 PWM_NOFLAGS>;
power-supply = <&reg_3v3>;
brightness-levels = <
0 1 2 3 4 5 6 7 8 9
@@ -81,7 +82,7 @@ backlight0: backlight0 {

backlight1: backlight1 {
compatible = "pwm-backlight";
- pwms = <&pwm1 0 500000 0>;
+ pwms = <&pwm1 0 500000 PWM_NOFLAGS>;
power-supply = <&reg_3v3>;
brightness-levels = <
0 1 2 3 4 5 6 7 8 9
diff --git a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
index 51a9bb9d6bc2..ee5199c6b231 100644
--- a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
@@ -50,7 +50,7 @@ / {
};

&backlight {
- pwms = <&pwm2 0 500000 0>;
+ pwms = <&pwm2 0 500000 PWM_NOFLAGS>;
/delete-property/ turn-on-delay-ms;
};

diff --git a/arch/arm/boot/dts/imx6q-display5.dtsi b/arch/arm/boot/dts/imx6q-display5.dtsi
index 83524bb99eb3..661b40cf68ec 100644
--- a/arch/arm/boot/dts/imx6q-display5.dtsi
+++ b/arch/arm/boot/dts/imx6q-display5.dtsi
@@ -56,7 +56,7 @@ backlight_lvds: backlight {
compatible = "pwm-backlight";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_backlight>;
- pwms = <&pwm2 0 5000000 0>;
+ pwms = <&pwm2 0 5000000 PWM_NOFLAGS>;
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
index ac3050a835e5..94cf7d99fc88 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
@@ -50,7 +50,7 @@ / {
};

&backlight {
- pwms = <&pwm2 0 500000 0>;
+ pwms = <&pwm2 0 500000 PWM_NOFLAGS>;
/delete-property/ turn-on-delay-ms;
};

diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
index a773f252816c..30c0858758c9 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
@@ -50,7 +50,7 @@ / {
};

&backlight {
- pwms = <&pwm2 0 500000 0>;
+ pwms = <&pwm2 0 500000 PWM_NOFLAGS>;
/delete-property/ turn-on-delay-ms;
};

diff --git a/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi
index 2ca2eb37e14f..e4662990d3a3 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi
@@ -48,7 +48,7 @@ aliases {

backlight0: backlight0 {
compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 0>;
+ pwms = <&pwm2 0 500000 PWM_NOFLAGS>;
power-supply = <&reg_lcd0_pwr>;
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
@@ -66,7 +66,7 @@ backlight0: backlight0 {

backlight1: backlight1 {
compatible = "pwm-backlight";
- pwms = <&pwm1 0 500000 0>;
+ pwms = <&pwm1 0 500000 PWM_NOFLAGS>;
power-supply = <&reg_lcd1_pwr>;
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index e18e89dec879..446a8b5d69bd 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -3,12 +3,14 @@
* Copyright 2016-2020 Toradex
*/

+#include <dt-bindings/pwm/pwm.h>
+
/ {
bl: backlight {
compatible = "pwm-backlight";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_bl_on>;
- pwms = <&pwm1 0 5000000 0>;
+ pwms = <&pwm1 0 5000000 PWM_NOFLAGS>;
enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
};

diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts
index 6b4acea1ef79..2f4d506bb2a4 100644
--- a/arch/arm/boot/dts/imx7d-nitrogen7.dts
+++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts
@@ -6,6 +6,7 @@
/dts-v1/;

#include "imx7d.dtsi"
+#include <dt-bindings/pwm/pwm.h>

/ {
model = "Boundary Devices i.MX7 Nitrogen7 Board";
@@ -26,7 +27,7 @@ backlight-j9 {

backlight_lcd: backlight-j20 {
compatible = "pwm-backlight";
- pwms = <&pwm1 0 5000000 0>;
+ pwms = <&pwm1 0 5000000 PWM_NOFLAGS>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi
index e57da0d32b98..e9239cdd47a6 100644
--- a/arch/arm/boot/dts/imx7d-pico.dtsi
+++ b/arch/arm/boot/dts/imx7d-pico.dtsi
@@ -5,11 +5,12 @@
/dts-v1/;

#include "imx7d.dtsi"
+#include <dt-bindings/pwm/pwm.h>

/ {
backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm4 0 50000 0>;
+ pwms = <&pwm4 0 50000 PWM_NOFLAGS>;
brightness-levels = <0 36 72 108 144 180 216 255>;
default-brightness-level = <6>;
};
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 869efbc4af42..214d3a2165a9 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -5,6 +5,7 @@
/dts-v1/;

#include "imx7d.dtsi"
+#include <dt-bindings/pwm/pwm.h>

/ {
model = "Freescale i.MX7 SabreSD Board";
@@ -129,7 +130,7 @@ reg_fec2_3v3: regulator-fec2-3v3 {

backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm1 0 5000000 0>;
+ pwms = <&pwm1 0 5000000 PWM_NOFLAGS>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx7ulp-evk.dts b/arch/arm/boot/dts/imx7ulp-evk.dts
index eff51e113db4..3a0674134553 100644
--- a/arch/arm/boot/dts/imx7ulp-evk.dts
+++ b/arch/arm/boot/dts/imx7ulp-evk.dts
@@ -8,6 +8,7 @@
/dts-v1/;

#include "imx7ulp.dtsi"
+#include <dt-bindings/pwm/pwm.h>

/ {
model = "NXP i.MX7ULP EVK";
@@ -24,7 +25,7 @@ memory@60000000 {

backlight {
compatible = "pwm-backlight";
- pwms = <&tpm4 1 50000 0>;
+ pwms = <&tpm4 1 50000 PWM_NOFLAGS>;
brightness-levels = <0 20 25 30 35 40 100>;
default-brightness-level = <6>;
status = "okay";
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index ebbe1518ef8a..f88deeb54e04 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -49,7 +49,7 @@ audio_clock: audio_clock {
lcd_backlight: backlight {
compatible = "pwm-backlight";

- pwms = <&pwm3 0 5000000 0>;
+ pwms = <&pwm3 0 5000000 PWM_NOFLAGS>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
enable-gpios = <&gpio5 14 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
index f7b82ced4080..7addd3f1fff5 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
@@ -149,7 +149,7 @@ bl: backlight {
compatible = "pwm-backlight";
pinctrl-names = "default";
pinctrl-0 = <&backlight_pins>;
- pwms = <&pwm10 0 5000000 0>;
+ pwms = <&pwm10 0 5000000 PWM_NOFLAGS>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <7>;
enable-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */
diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts
index 163a200d5a7b..3a9f96553cea 100644
--- a/arch/arm/boot/dts/meson8b-ec100.dts
+++ b/arch/arm/boot/dts/meson8b-ec100.dts
@@ -150,7 +150,7 @@ vcck: regulator-vcck {

vin-supply = <&vcc_5v>;

- pwms = <&pwm_cd 0 1148 0>;
+ pwms = <&pwm_cd 0 1148 PWM_NOFLAGS>;
pwm-dutycycle-range = <100 0>;

regulator-boot-on;
@@ -234,7 +234,7 @@ vddee: regulator-vddee {

vin-supply = <&vcc_5v>;

- pwms = <&pwm_cd 1 1148 0>;
+ pwms = <&pwm_cd 1 1148 PWM_NOFLAGS>;
pwm-dutycycle-range = <100 0>;

regulator-boot-on;
diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/meson8b-mxq.dts
index 33037ef62d0a..45dc14783716 100644
--- a/arch/arm/boot/dts/meson8b-mxq.dts
+++ b/arch/arm/boot/dts/meson8b-mxq.dts
@@ -39,7 +39,7 @@ vcck: regulator-vcck {
regulator-min-microvolt = <860000>;
regulator-max-microvolt = <1140000>;

- pwms = <&pwm_cd 0 1148 0>;
+ pwms = <&pwm_cd 0 1148 PWM_NOFLAGS>;
pwm-dutycycle-range = <100 0>;

regulator-boot-on;
@@ -86,7 +86,7 @@ vddee: regulator-vddee {

vin-supply = <&vcc_5v>;

- pwms = <&pwm_cd 1 1148 0>;
+ pwms = <&pwm_cd 1 1148 PWM_NOFLAGS>;
pwm-dutycycle-range = <100 0>;

regulator-boot-on;
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index a2a47804fc4a..b08ca542b1b7 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -132,7 +132,7 @@ vcck: regulator-vcck {

vin-supply = <&p5v0>;

- pwms = <&pwm_cd 0 12218 0>;
+ pwms = <&pwm_cd 0 12218 PWM_NOFLAGS>;
pwm-dutycycle-range = <91 0>;

regulator-boot-on;
@@ -164,7 +164,7 @@ vddee: regulator-vddee {

vin-supply = <&p5v0>;

- pwms = <&pwm_cd 1 12218 0>;
+ pwms = <&pwm_cd 1 12218 PWM_NOFLAGS>;
pwm-dutycycle-range = <91 0>;

regulator-boot-on;
diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
index 9067e0ef4240..7ac4c63f2d6a 100644
--- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi
+++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
@@ -178,7 +178,8 @@ pwm9: dmtimer-pwm-9 {

vibrator {
compatible = "pwm-vibrator";
- pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>;
+ pwms = <&pwm9 0 10000000 PWM_NOFLAGS>,
+ <&pwm8 0 10000000 PWM_NOFLAGS>;
pwm-names = "enable", "direction";
direction-duty-cycle-ns = <10000000>;
};
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 409a758c99f1..aa7f23c7c8a1 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -138,7 +138,7 @@ lcd_in: endpoint {

backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm11 0 12000000 0>;
+ pwms = <&pwm11 0 12000000 PWM_NOFLAGS>;
pwm-names = "backlight";
brightness-levels = <0 11 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <9>; /* => 90 */
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 4089d97405c9..0a99ea066799 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -152,7 +152,7 @@ pwm9: dmtimer-pwm {

ir: n900-ir {
compatible = "nokia,n900-ir";
- pwms = <&pwm9 0 26316 0>; /* 38000 Hz */
+ pwms = <&pwm9 0 26316 PWM_NOFLAGS>; /* 38000 Hz */
};

rom_rng: rng {
diff --git a/arch/arm/boot/dts/rk3288-veyron-edp.dtsi b/arch/arm/boot/dts/rk3288-veyron-edp.dtsi
index 32c0f10765dd..296b9858762c 100644
--- a/arch/arm/boot/dts/rk3288-veyron-edp.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-edp.dtsi
@@ -47,7 +47,7 @@ backlight: backlight {
enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bl_en>;
- pwms = <&pwm0 0 1000000 0>;
+ pwms = <&pwm0 0 1000000 PWM_NOFLAGS>;
post-pwm-on-delay-ms = <10>;
pwm-off-delay-ms = <10>;
power-supply = <&backlight_regulator>;
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 54a6838d73f5..17cf002f428b 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -101,7 +101,7 @@ vdd_logic: vdd-logic {
compatible = "pwm-regulator";
regulator-name = "vdd_logic";

- pwms = <&pwm1 0 1994 0>;
+ pwms = <&pwm1 0 1994 PWM_NOFLAGS>;
pwm-supply = <&vcc33_sys>;

pwm-dutycycle-range = <0x7b 0>;
diff --git a/arch/arm/boot/dts/rv1108-evb.dts b/arch/arm/boot/dts/rv1108-evb.dts
index 30f3d0470ad9..04c27ed32b72 100644
--- a/arch/arm/boot/dts/rv1108-evb.dts
+++ b/arch/arm/boot/dts/rv1108-evb.dts
@@ -53,7 +53,7 @@ backlight: backlight {
240 241 242 243 244 245 246 247
248 249 250 251 252 253 254 255>;
default-brightness-level = <200>;
- pwms = <&pwm0 0 25000 0>;
+ pwms = <&pwm0 0 25000 PWM_NOFLAGS>;
};

vcc_sys: vsys-regulator {
diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts
index 1aeac33b0d34..71b5d31e6ad3 100644
--- a/arch/arm/boot/dts/s3c6410-mini6410.dts
+++ b/arch/arm/boot/dts/s3c6410-mini6410.dts
@@ -159,7 +159,7 @@ led-4 {

buzzer {
compatible = "pwm-beeper";
- pwms = <&pwm 0 1000000 0>;
+ pwms = <&pwm 0 1000000 PWM_NOFLAGS>;
pinctrl-names = "default";
pinctrl-0 = <&pwm0_out>;
};
diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
index 8ff70b856334..6b01e18385e1 100644
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -324,7 +324,7 @@ fuelgauge@36 {

vibrator: pwm-vibrator {
compatible = "pwm-vibrator";
- pwms = <&pwm 1 44642 0>;
+ pwms = <&pwm 1 44642 PWM_NOFLAGS>;
pwm-names = "enable";
vcc-supply = <&vibrator_pwr>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/s5pv210-smdkv210.dts b/arch/arm/boot/dts/s5pv210-smdkv210.dts
index 84b38f185199..065770003dca 100644
--- a/arch/arm/boot/dts/s5pv210-smdkv210.dts
+++ b/arch/arm/boot/dts/s5pv210-smdkv210.dts
@@ -42,7 +42,7 @@ ethernet@18000000 {

backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 3 5000000 0>;
+ pwms = <&pwm 3 5000000 PWM_NOFLAGS>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/sun5i-gr8-evb.dts b/arch/arm/boot/dts/sun5i-gr8-evb.dts
index 4c20d731a9c6..4f7f143140d2 100644
--- a/arch/arm/boot/dts/sun5i-gr8-evb.dts
+++ b/arch/arm/boot/dts/sun5i-gr8-evb.dts
@@ -69,7 +69,7 @@ chosen {

backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 0 10000 0>;
+ pwms = <&pwm 0 10000 PWM_NOFLAGS>;
enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;

brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi
index cc1e069c44e6..7300299e90f4 100644
--- a/arch/arm/boot/dts/vf-colibri.dtsi
+++ b/arch/arm/boot/dts/vf-colibri.dtsi
@@ -4,6 +4,8 @@
*
*/

+#include <dt-bindings/pwm/pwm.h>
+
/ {
aliases {
ethernet0 = &fec1;
@@ -14,7 +16,7 @@ bl: backlight {
compatible = "pwm-backlight";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_bl_on>;
- pwms = <&pwm0 0 5000000 0>;
+ pwms = <&pwm0 0 5000000 PWM_NOFLAGS>;
enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
--
2.24.1


2020-04-09 12:16:35

by Krzysztof Kozlowski

[permalink] [raw]
Subject: Re: [RFC PATCH v2 6/6] arm: dts: pwm: replace flag 0 with PWM_NOFLAGS

On Sun, Apr 05, 2020 at 10:22:46PM +0300, Oleksandr Suvorov wrote:
> The raw value '0' in the 3rd cell of the "pwms" property means there are
> no flags to be set.
>
> This patch converts '0' value into PWM_NOFLAGS.
>
> Signed-off-by: Oleksandr Suvorov <[email protected]>
> ---
>
> Changes in v2:
> - remove the driver part of patchset as dangerous and senseless.
> - use PWM_NOFLAGS instead of PWM_POLARITY_NORMAL to avoid possible
> conflict with enum pwm_polarity in <linux/pwm.h>. Also, this name
> reflects the sense of this value more precisely.
>
> arch/arm/boot/dts/am335x-cm-t335.dts | 2 +-
> arch/arm/boot/dts/am335x-evm.dts | 2 +-
> arch/arm/boot/dts/am3517-evm.dts | 2 +-
> arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi | 2 +-
> arch/arm/boot/dts/at91-kizbox2-common.dtsi | 6 +++---
> arch/arm/boot/dts/at91-kizbox3_common.dtsi | 8 ++++----
> arch/arm/boot/dts/at91-kizboxmini-common.dtsi | 6 +++---
> arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 2 +-
> arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts | 2 +-
> arch/arm/boot/dts/at91sam9n12ek.dts | 2 +-
> arch/arm/boot/dts/at91sam9x5dm.dtsi | 2 +-
> arch/arm/boot/dts/berlin2cd-google-chromecast.dts | 4 ++--
> arch/arm/boot/dts/da850-evm.dts | 2 +-
> arch/arm/boot/dts/da850-lego-ev3.dts | 4 ++--
> arch/arm/boot/dts/exynos4412-midas.dtsi | 2 +-
> arch/arm/boot/dts/exynos4412-odroidu3.dts | 2 +-
> arch/arm/boot/dts/exynos5250-snow-common.dtsi | 2 +-
> arch/arm/boot/dts/exynos5410-odroidxu.dts | 2 +-
> arch/arm/boot/dts/exynos5420-peach-pit.dts | 2 +-
> arch/arm/boot/dts/exynos5422-odroidhc1.dts | 2 +-
> arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 2 +-
> arch/arm/boot/dts/exynos5422-odroidxu4.dts | 2 +-
> arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi | 4 ++--
> arch/arm/boot/dts/exynos5800-peach-pi.dts | 2 +-
> arch/arm/boot/dts/imx53-tx53-x13x.dts | 5 +++--
> arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts | 2 +-
> arch/arm/boot/dts/imx6q-display5.dtsi | 2 +-
> arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts | 2 +-
> arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts | 2 +-
> arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi | 4 ++--
> arch/arm/boot/dts/imx7-colibri.dtsi | 4 +++-
> arch/arm/boot/dts/imx7d-nitrogen7.dts | 3 ++-
> arch/arm/boot/dts/imx7d-pico.dtsi | 3 ++-
> arch/arm/boot/dts/imx7d-sdb.dts | 3 ++-
> arch/arm/boot/dts/imx7ulp-evk.dts | 3 ++-
> arch/arm/boot/dts/iwg20d-q7-common.dtsi | 2 +-
> arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi | 2 +-
> arch/arm/boot/dts/meson8b-ec100.dts | 4 ++--
> arch/arm/boot/dts/meson8b-mxq.dts | 4 ++--
> arch/arm/boot/dts/meson8b-odroidc1.dts | 4 ++--
> arch/arm/boot/dts/motorola-mapphone-common.dtsi | 3 ++-
> arch/arm/boot/dts/omap3-gta04.dtsi | 2 +-
> arch/arm/boot/dts/omap3-n900.dts | 2 +-
> arch/arm/boot/dts/rk3288-veyron-edp.dtsi | 2 +-
> arch/arm/boot/dts/rk3288-veyron.dtsi | 2 +-
> arch/arm/boot/dts/rv1108-evb.dts | 2 +-
> arch/arm/boot/dts/s3c6410-mini6410.dts | 2 +-
> arch/arm/boot/dts/s5pv210-aries.dtsi | 2 +-
> arch/arm/boot/dts/s5pv210-smdkv210.dts | 2 +-


I understand you are going to push it through arm-soc, so:
For Exynos/S3C/S5P:
Acked-by: Krzysztof Kozlowski <[email protected]>

Otherwise if you expect individual maintainers to pick it up, please
split per architecture.

Best regards,
Krzysztof