From: Chen-Yu Tsai <[email protected]>
With SDIO now enabled, the numbering of the existing MMC host controllers
gets incremented by 1, as the SDIO host is the first one.
Increment the numbering of the MMC LED triggers to match.
Fixes: cf3c5397835f ("arm64: dts: rockchip: Enable sdio0 and uart0 on rk3399-roc-pc-mezzanine")
Signed-off-by: Chen-Yu Tsai <[email protected]>
---
arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts | 8 ++++++++
arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi | 4 ++--
2 files changed, 10 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
index 2acb3d500fb9..f0686fc276be 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
@@ -38,6 +38,10 @@ vcc3v3_pcie: vcc3v3-pcie {
};
};
+&diy_led {
+ linux,default-trigger = "mmc2";
+};
+
&pcie_phy {
status = "okay";
};
@@ -91,3 +95,7 @@ &uart0 {
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
status = "okay";
};
+
+&yellow_led {
+ linux,default-trigger = "mmc1";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
index 9f225e9c3d54..bc060ac7972d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
@@ -70,14 +70,14 @@ work-led {
linux,default-trigger = "heartbeat";
};
- diy-led {
+ diy_led: diy-led {
label = "red:diy";
gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "mmc1";
};
- yellow-led {
+ yellow_led: yellow-led {
label = "yellow:yellow-led";
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
default-state = "off";
--
2.25.1
Hi Chen-Yu Tsai,
The led node names need some changes.
'linux,default-trigger' value does not fit.
From leds-gpio.yaml:
patternProperties:
# The first form is preferred, but fall back to just 'led' anywhere in the
# node name to at least catch some child nodes.
"(^led-[0-9a-f]$|led)":
type: object
Rename led nodenames to 'led-0' form
Also include all mail lists found with:
./scripts/get_maintainer.pl --nogit-fallback --nogit
[email protected]
If you like change the rest of dts with leds as well...
DTC arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dt.yaml
CHECK arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dt.yaml
arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dt.yaml: leds:
yellow-led:linux,default-trigger:0: 'mmc0' is not one of ['backlight',
'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dt.yaml: leds:
diy-led:linux,default-trigger:0: 'mmc1' is not one of ['backlight',
'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
DTC arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dt.yaml
CHECK arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dt.yaml
arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dt.yaml: leds:
diy-led:linux,default-trigger:0: 'mmc2' is not one of ['backlight',
'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dt.yaml: leds:
yellow-led:linux,default-trigger:0: 'mmc1' is not one of ['backlight',
'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
make -k ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/leds/leds-gpio.yaml
> From: Chen-Yu Tsai <[email protected]>
>
> With SDIO now enabled, the numbering of the existing MMC host controllers
> gets incremented by 1, as the SDIO host is the first one.
>
> Increment the numbering of the MMC LED triggers to match.
>
> Fixes: cf3c5397835f ("arm64: dts: rockchip: Enable sdio0 and uart0 on rk3399-roc-pc-mezzanine")
> Signed-off-by: Chen-Yu Tsai <[email protected]>
> ---
> arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts | 8 ++++++++
> arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi | 4 ++--
> 2 files changed, 10 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
> index 2acb3d500fb9..f0686fc276be 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
> @@ -38,6 +38,10 @@ vcc3v3_pcie: vcc3v3-pcie {
> };
> };
>
> +&diy_led {
> + linux,default-trigger = "mmc2";
> +};
> +
> &pcie_phy {
> status = "okay";
> };
> @@ -91,3 +95,7 @@ &uart0 {
> pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
> status = "okay";
> };
> +
> +&yellow_led {
> + linux,default-trigger = "mmc1";
> +};
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
> index 9f225e9c3d54..bc060ac7972d 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
> @@ -70,14 +70,14 @@ work-led {
> linux,default-trigger = "heartbeat";
> };
>
> - diy-led {
> + diy_led: diy-led {
> label = "red:diy";
> gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
> default-state = "off";
> linux,default-trigger = "mmc1";
> };
>
> - yellow-led {
> + yellow_led: yellow-led {
> label = "yellow:yellow-led";
> gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
> default-state = "off";
> --
> 2.25.1
On Fri, Mar 27, 2020 at 5:58 PM Johan Jonker <[email protected]> wrote:
>
> Hi Chen-Yu Tsai,
>
> The led node names need some changes.
> 'linux,default-trigger' value does not fit.
>
> From leds-gpio.yaml:
>
> patternProperties:
> # The first form is preferred, but fall back to just 'led' anywhere in the
> # node name to at least catch some child nodes.
> "(^led-[0-9a-f]$|led)":
> type: object
>
> Rename led nodenames to 'led-0' form
>
> Also include all mail lists found with:
> ./scripts/get_maintainer.pl --nogit-fallback --nogit
>
> [email protected]
Oops...
> If you like change the rest of dts with leds as well...
>
> DTC arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dt.yaml
> CHECK arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dt.yaml
> arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dt.yaml: leds:
> yellow-led:linux,default-trigger:0: 'mmc0' is not one of ['backlight',
> 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
> arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dt.yaml: leds:
> diy-led:linux,default-trigger:0: 'mmc1' is not one of ['backlight',
> 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
> DTC arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dt.yaml
> CHECK arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dt.yaml
> arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dt.yaml: leds:
> diy-led:linux,default-trigger:0: 'mmc2' is not one of ['backlight',
> 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
> arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dt.yaml: leds:
> yellow-led:linux,default-trigger:0: 'mmc1' is not one of ['backlight',
> 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
Maybe we should just get rid of linux,default-trigger then?
Heiko?
ChenYu
> make -k ARCH=arm64 dtbs_check
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/leds/leds-gpio.yaml
>
> > From: Chen-Yu Tsai <[email protected]>
> >
> > With SDIO now enabled, the numbering of the existing MMC host controllers
> > gets incremented by 1, as the SDIO host is the first one.
> >
> > Increment the numbering of the MMC LED triggers to match.
> >
> > Fixes: cf3c5397835f ("arm64: dts: rockchip: Enable sdio0 and uart0 on rk3399-roc-pc-mezzanine")
> > Signed-off-by: Chen-Yu Tsai <[email protected]>
> > ---
> > arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts | 8 ++++++++
> > arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi | 4 ++--
> > 2 files changed, 10 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
> > index 2acb3d500fb9..f0686fc276be 100644
> > --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
> > +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
> > @@ -38,6 +38,10 @@ vcc3v3_pcie: vcc3v3-pcie {
> > };
> > };
> >
> > +&diy_led {
> > + linux,default-trigger = "mmc2";
> > +};
> > +
> > &pcie_phy {
> > status = "okay";
> > };
> > @@ -91,3 +95,7 @@ &uart0 {
> > pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
> > status = "okay";
> > };
> > +
> > +&yellow_led {
> > + linux,default-trigger = "mmc1";
> > +};
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
> > index 9f225e9c3d54..bc060ac7972d 100644
> > --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
> > +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
> > @@ -70,14 +70,14 @@ work-led {
> > linux,default-trigger = "heartbeat";
> > };
> >
> > - diy-led {
> > + diy_led: diy-led {
> > label = "red:diy";
> > gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
> > default-state = "off";
> > linux,default-trigger = "mmc1";
> > };
> >
> > - yellow-led {
> > + yellow_led: yellow-led {
> > label = "yellow:yellow-led";
> > gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
> > default-state = "off";
> > --
> > 2.25.1
>
[ +cc LED binding maintainers]
On 2020-03-29 5:36 pm, Chen-Yu Tsai wrote:
> On Fri, Mar 27, 2020 at 5:58 PM Johan Jonker <[email protected]> wrote:
>>
>> Hi Chen-Yu Tsai,
>>
>> The led node names need some changes.
>> 'linux,default-trigger' value does not fit.
>>
>> From leds-gpio.yaml:
>>
>> patternProperties:
>> # The first form is preferred, but fall back to just 'led' anywhere in the
>> # node name to at least catch some child nodes.
>> "(^led-[0-9a-f]$|led)":
>> type: object
>>
>> Rename led nodenames to 'led-0' form
>>
>> Also include all mail lists found with:
>> ./scripts/get_maintainer.pl --nogit-fallback --nogit
>>
>> [email protected]
>
> Oops...
>
>> If you like change the rest of dts with leds as well...
>>
>> DTC arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dt.yaml
>> CHECK arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dt.yaml
>> arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dt.yaml: leds:
>> yellow-led:linux,default-trigger:0: 'mmc0' is not one of ['backlight',
>> 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
>> arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dt.yaml: leds:
>> diy-led:linux,default-trigger:0: 'mmc1' is not one of ['backlight',
>> 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
>> DTC arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dt.yaml
>> CHECK arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dt.yaml
>> arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dt.yaml: leds:
>> diy-led:linux,default-trigger:0: 'mmc2' is not one of ['backlight',
>> 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
>> arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dt.yaml: leds:
>> yellow-led:linux,default-trigger:0: 'mmc1' is not one of ['backlight',
>> 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
>
> Maybe we should just get rid of linux,default-trigger then?
In this particular case, I'd say it's probably time to reevaluate the
rather out-of-date binding. The apparent intent of the
"linux,default-trigger" property seems to be to describe any trigger
supported by Linux, so either the binding wants to be kept in sync with
all the triggers Linux actually supports, or perhaps it should just be
redefined as a free-form string. FWIW I'd be slightly inclined towards
the latter, since the schema validator can't know whether the given
trigger actually corresponds to the correct thing for whatever the LED
is physically labelled on the board/case, nor whether the version(s) of
Linux that people intend to use actually support that trigger (since it
doesn't have to be the version contemporary with the schema definition),
so strict validation of this particular property seems to be of limited
value.
Robin.
>
> Heiko?
>
> ChenYu
>
>> make -k ARCH=arm64 dtbs_check
>> DT_SCHEMA_FILES=Documentation/devicetree/bindings/leds/leds-gpio.yaml
>>
>>> From: Chen-Yu Tsai <[email protected]>
>>>
>>> With SDIO now enabled, the numbering of the existing MMC host controllers
>>> gets incremented by 1, as the SDIO host is the first one.
>>>
>>> Increment the numbering of the MMC LED triggers to match.
>>>
>>> Fixes: cf3c5397835f ("arm64: dts: rockchip: Enable sdio0 and uart0 on rk3399-roc-pc-mezzanine")
>>> Signed-off-by: Chen-Yu Tsai <[email protected]>
>>> ---
>>> arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts | 8 ++++++++
>>> arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi | 4 ++--
>>> 2 files changed, 10 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
>>> index 2acb3d500fb9..f0686fc276be 100644
>>> --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
>>> +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
>>> @@ -38,6 +38,10 @@ vcc3v3_pcie: vcc3v3-pcie {
>>> };
>>> };
>>>
>>> +&diy_led {
>>> + linux,default-trigger = "mmc2";
>>> +};
>>> +
>>> &pcie_phy {
>>> status = "okay";
>>> };
>>> @@ -91,3 +95,7 @@ &uart0 {
>>> pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
>>> status = "okay";
>>> };
>>> +
>>> +&yellow_led {
>>> + linux,default-trigger = "mmc1";
>>> +};
>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
>>> index 9f225e9c3d54..bc060ac7972d 100644
>>> --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
>>> +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
>>> @@ -70,14 +70,14 @@ work-led {
>>> linux,default-trigger = "heartbeat";
>>> };
>>>
>>> - diy-led {
>>> + diy_led: diy-led {
>>> label = "red:diy";
>>> gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
>>> default-state = "off";
>>> linux,default-trigger = "mmc1";
>>> };
>>>
>>> - yellow-led {
>>> + yellow_led: yellow-led {
>>> label = "yellow:yellow-led";
>>> gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
>>> default-state = "off";
>>> --
>>> 2.25.1
>>
>
> _______________________________________________
> Linux-rockchip mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
>
On 3/31/20 1:07 PM, Robin Murphy wrote:
> [ +cc LED binding maintainers]
>
> On 2020-03-29 5:36 pm, Chen-Yu Tsai wrote:
>> On Fri, Mar 27, 2020 at 5:58 PM Johan Jonker <[email protected]> wrote:
>>>
>>> Hi Chen-Yu Tsai,
>>>
>>> The led node names need some changes.
>>> 'linux,default-trigger' value does not fit.
>>>
>>> From leds-gpio.yaml:
>>>
>>> patternProperties:
>>> # The first form is preferred, but fall back to just 'led'
>>> anywhere in the
>>> # node name to at least catch some child nodes.
>>> "(^led-[0-9a-f]$|led)":
>>> type: object
>>>
>>> Rename led nodenames to 'led-0' form
>>>
>>> Also include all mail lists found with:
>>> ./scripts/get_maintainer.pl --nogit-fallback --nogit
>>>
>>> [email protected]
>>
>> Oops...
>>
>>> If you like change the rest of dts with leds as well...
>>>
>>> DTC arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dt.yaml
>>> CHECK arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dt.yaml
>>> arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dt.yaml: leds:
>>> yellow-led:linux,default-trigger:0: 'mmc0' is not one of ['backlight',
>>> 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer',
>>> 'pattern']
>>> arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dt.yaml: leds:
>>> diy-led:linux,default-trigger:0: 'mmc1' is not one of ['backlight',
>>> 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer',
>>> 'pattern']
>>> DTC arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dt.yaml
>>> CHECK arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dt.yaml
>>> arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dt.yaml: leds:
>>> diy-led:linux,default-trigger:0: 'mmc2' is not one of ['backlight',
>>> 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer',
>>> 'pattern']
>>> arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dt.yaml: leds:
>>> yellow-led:linux,default-trigger:0: 'mmc1' is not one of ['backlight',
>>> 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer',
>>> 'pattern']
>>
>> Maybe we should just get rid of linux,default-trigger then?
>
> In this particular case, I'd say it's probably time to reevaluate the
> rather out-of-date binding. The apparent intent of the
> "linux,default-trigger" property seems to be to describe any trigger
> supported by Linux, so either the binding wants to be kept in sync with
> all the triggers Linux actually supports, or perhaps it should just be
> redefined as a free-form string. FWIW I'd be slightly inclined towards
> the latter, since the schema validator can't know whether the given
> trigger actually corresponds to the correct thing for whatever the LED
I agree. It is possible for LED class drivers to register their private
triggers, so generic bindings cannot use predefined set for validation.
I think that Rob just blindly converted common.txt to yaml and I acked
that but didn't envisage the implications for validation.
All in all, even that list in common.txt didn't include all existing
generic LED triggers.
Best regards,
Jacek Anaszewski
> is physically labelled on the board/case, nor whether the version(s) of
> Linux that people intend to use actually support that trigger (since it
> doesn't have to be the version contemporary with the schema definition),
> so strict validation of this particular property seems to be of limited
> value.
>
> Robin.
>
>>
>> Heiko?
>>
>> ChenYu
>>
>>> make -k ARCH=arm64 dtbs_check
>>> DT_SCHEMA_FILES=Documentation/devicetree/bindings/leds/leds-gpio.yaml
>>>
>>>> From: Chen-Yu Tsai <[email protected]>
>>>>
>>>> With SDIO now enabled, the numbering of the existing MMC host
>>>> controllers
>>>> gets incremented by 1, as the SDIO host is the first one.
>>>>
>>>> Increment the numbering of the MMC LED triggers to match.
>>>>
>>>> Fixes: cf3c5397835f ("arm64: dts: rockchip: Enable sdio0 and uart0
>>>> on rk3399-roc-pc-mezzanine")
>>>> Signed-off-by: Chen-Yu Tsai <[email protected]>
>>>> ---
>>>> arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts | 8 ++++++++
>>>> arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi | 4 ++--
>>>> 2 files changed, 10 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git
>>>> a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
>>>> b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
>>>> index 2acb3d500fb9..f0686fc276be 100644
>>>> --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
>>>> +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
>>>> @@ -38,6 +38,10 @@ vcc3v3_pcie: vcc3v3-pcie {
>>>> };
>>>> };
>>>>
>>>> +&diy_led {
>>>> + linux,default-trigger = "mmc2";
>>>> +};
>>>> +
>>>> &pcie_phy {
>>>> status = "okay";
>>>> };
>>>> @@ -91,3 +95,7 @@ &uart0 {
>>>> pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
>>>> status = "okay";
>>>> };
>>>> +
>>>> +&yellow_led {
>>>> + linux,default-trigger = "mmc1";
>>>> +};
>>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
>>>> b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
>>>> index 9f225e9c3d54..bc060ac7972d 100644
>>>> --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
>>>> +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
>>>> @@ -70,14 +70,14 @@ work-led {
>>>> linux,default-trigger = "heartbeat";
>>>> };
>>>>
>>>> - diy-led {
>>>> + diy_led: diy-led {
>>>> label = "red:diy";
>>>> gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
>>>> default-state = "off";
>>>> linux,default-trigger = "mmc1";
>>>> };
>>>>
>>>> - yellow-led {
>>>> + yellow_led: yellow-led {
>>>> label = "yellow:yellow-led";
>>>> gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
>>>> default-state = "off";
>>>> --
>>>> 2.25.1
>>>
>>
>> _______________________________________________
>> Linux-rockchip mailing list
>> [email protected]
>> http://lists.infradead.org/mailman/listinfo/linux-rockchip
>>
Hi!
> > > arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dt.yaml: leds:
> > > diy-led:linux,default-trigger:0: 'mmc2' is not one of ['backlight',
> > > 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
> > > arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dt.yaml: leds:
> > > yellow-led:linux,default-trigger:0: 'mmc1' is not one of ['backlight',
> > > 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
> >
> > Maybe we should just get rid of linux,default-trigger then?
>
> In this particular case, I'd say it's probably time to reevaluate the rather
> out-of-date binding. The apparent intent of the "linux,default-trigger"
> property seems to be to describe any trigger supported by Linux, so either
> the binding wants to be kept in sync with all the triggers Linux actually
> supports, or perhaps it should just be redefined as a free-form
It is enough to keep it in sync with all the triggers we actually use :-).
> I'd be slightly inclined towards the latter, since the schema validator
> can't know whether the given trigger actually corresponds to the correct
> thing for whatever the LED is physically labelled on the board/case, nor
> whether the version(s) of Linux that people intend to use actually support
> that trigger (since it doesn't have to be the version contemporary with the
> schema definition), so strict validation of this particular property seems
> to be of limited value.
But freeform seems acceptable, too.
> > > > - diy-led {
> > > > + diy_led: diy-led {
> > > > label = "red:diy";
> > > > gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
> > > > default-state = "off";
> > > > linux,default-trigger = "mmc1";
> > > > };
This label probably should be "mmc1:red:activity" or something like that.
> > > > - yellow-led {
> > > > + yellow_led: yellow-led {
> > > > label = "yellow:yellow-led";
> > > > gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
> > > > default-state = "off";
And this label should be changed, too.
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Hi Pavel,
On Mon, Apr 6, 2020 at 5:13 PM Pavel Machek <[email protected]> wrote:
>
> Hi!
>
> > > > arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dt.yaml: leds:
> > > > diy-led:linux,default-trigger:0: 'mmc2' is not one of ['backlight',
> > > > 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
> > > > arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dt.yaml: leds:
> > > > yellow-led:linux,default-trigger:0: 'mmc1' is not one of ['backlight',
> > > > 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
> > >
> > > Maybe we should just get rid of linux,default-trigger then?
> >
> > In this particular case, I'd say it's probably time to reevaluate the rather
> > out-of-date binding. The apparent intent of the "linux,default-trigger"
> > property seems to be to describe any trigger supported by Linux, so either
> > the binding wants to be kept in sync with all the triggers Linux actually
> > supports, or perhaps it should just be redefined as a free-form
>
> It is enough to keep it in sync with all the triggers we actually use :-).
>
> > I'd be slightly inclined towards the latter, since the schema validator
> > can't know whether the given trigger actually corresponds to the correct
> > thing for whatever the LED is physically labelled on the board/case, nor
> > whether the version(s) of Linux that people intend to use actually support
> > that trigger (since it doesn't have to be the version contemporary with the
> > schema definition), so strict validation of this particular property seems
> > to be of limited value.
>
> But freeform seems acceptable, too.
I'd say free form is easier to manage. Being in the list of valid triggers
doesn't mean the kernel actually has support for it enabled.
> > > > > - diy-led {
> > > > > + diy_led: diy-led {
> > > > > label = "red:diy";
> > > > > gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
> > > > > default-state = "off";
> > > > > linux,default-trigger = "mmc1";
> > > > > };
>
> This label probably should be "mmc1:red:activity" or something like that.
Is changing this after it has been in some kernel releases OK? Wouldn't
it be considered a break of sysfs ABI?
Also, is there some guideline on how to name the labels? For sunxi we've
been doing "${vendor}:${color}:${function}" since forever.
As far as I can tell, the hardware vendor [1] has no specific uses for
these two (red and yellow) LEDs designed in. And their GPIO lines are
simply labeled "DIY" (for the red one) and "YELLOW". So I'm not sure
if putting "our" interpretations and the default-trigger into the
label is wise.
For reference, the green one has its GPIO line labeled "WORK", and their
intention from [1] is to have it as some sort of power / activity indicator.
Hence it is named / labeled "work".
As for the node names, I think we can keep it as is for now. It's not
the preferred form, but there's really no need to change it either.
And some overlay or script might actually expect that name.
Regards
ChenYu
[1] http://wiki.t-firefly.com/en/ROC-RK3399-PC/driver_led.html
> > > > > - yellow-led {
> > > > > + yellow_led: yellow-led {
> > > > > label = "yellow:yellow-led";
> > > > > gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
> > > > > default-state = "off";
>
> And this label should be changed, too.
>
> Best regards,
> Pavel
> --
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html