When the bcm_sf2 was converted into a proper platform device driver and
used the new dsa_register_switch() interface, we would still be parsing
the legacy DSA node that contained all the port information since the
platform firmware has intentionally maintained backward and forward
compatibility to client programs. Ensure that we do parse the correct
node, which is "ports" per the revised DSA binding.
Fixes: d9338023fb8e ("net: dsa: bcm_sf2: Make it a real platform device driver")
Signed-off-by: Florian Fainelli <[email protected]>
---
drivers/net/dsa/bcm_sf2.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index cc95adc5ab4b..c7ac63f41918 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -1079,6 +1079,7 @@ static int bcm_sf2_sw_probe(struct platform_device *pdev)
const struct bcm_sf2_of_data *data;
struct b53_platform_data *pdata;
struct dsa_switch_ops *ops;
+ struct device_node *ports;
struct bcm_sf2_priv *priv;
struct b53_device *dev;
struct dsa_switch *ds;
@@ -1146,7 +1147,11 @@ static int bcm_sf2_sw_probe(struct platform_device *pdev)
set_bit(0, priv->cfp.used);
set_bit(0, priv->cfp.unique);
- bcm_sf2_identify_ports(priv, dn->child);
+ ports = of_find_node_by_name(dn, "ports");
+ if (ports) {
+ bcm_sf2_identify_ports(priv, ports);
+ of_node_put(ports);
+ }
priv->irq0 = irq_of_parse_and_map(dn, 0);
priv->irq1 = irq_of_parse_and_map(dn, 1);
--
2.17.1
On Sun, 5 Apr 2020 13:00:30 -0700, Florian Fainelli <[email protected]> wrote:
> When the bcm_sf2 was converted into a proper platform device driver and
> used the new dsa_register_switch() interface, we would still be parsing
> the legacy DSA node that contained all the port information since the
> platform firmware has intentionally maintained backward and forward
> compatibility to client programs. Ensure that we do parse the correct
> node, which is "ports" per the revised DSA binding.
>
> Fixes: d9338023fb8e ("net: dsa: bcm_sf2: Make it a real platform device driver")
> Signed-off-by: Florian Fainelli <[email protected]>
Reviewed-by: Vivien Didelot <[email protected]>
From: Florian Fainelli <[email protected]>
Date: Sun, 5 Apr 2020 13:00:30 -0700
> When the bcm_sf2 was converted into a proper platform device driver and
> used the new dsa_register_switch() interface, we would still be parsing
> the legacy DSA node that contained all the port information since the
> platform firmware has intentionally maintained backward and forward
> compatibility to client programs. Ensure that we do parse the correct
> node, which is "ports" per the revised DSA binding.
>
> Fixes: d9338023fb8e ("net: dsa: bcm_sf2: Make it a real platform device driver")
> Signed-off-by: Florian Fainelli <[email protected]>
Applied and queued up for -stable, thanks Florian.