Add required device tree nodes to enable the USB SS and HS
paths on the primary USB controller on SM8150. In addition,
implement missing resources from the SM8150 GCC driver, which
includes the USB GDSC and the USB PIPE clocks.
Changes in v3:
- Set dr_mode to "peripheral" on the SM8150 MTP DTSI file.
Changes in v2:
- Combine GDSC and USB PIPE clock changes.
- Re-order DTS nodes based on address
Jack Pham (1):
arm64: dts: qcom: sm8150: Add USB and PHY device nodes
Wesley Cheng (1):
clk: qcom: gcc: Add USB3 PIPE clock and GDSC for SM8150
arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 21 +++++++
arch/arm64/boot/dts/qcom/sm8150.dtsi | 92 +++++++++++++++++++++++++++++
drivers/clk/qcom/gcc-sm8150.c | 52 ++++++++++++++++
include/dt-bindings/clock/qcom,gcc-sm8150.h | 4 ++
4 files changed, 169 insertions(+)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
On 07-04-20, 15:24, Wesley Cheng wrote:
> Add required device tree nodes to enable the USB SS and HS
> paths on the primary USB controller on SM8150. In addition,
> implement missing resources from the SM8150 GCC driver, which
> includes the USB GDSC and the USB PIPE clocks.
lgtm:
Tested-by: Vinod Koul <[email protected]>
Reviewed-by: Vinod Koul <[email protected]>
--
~Vinod