The PS8640 dsi-to-eDP bridge driver is using the panel bridge API,
however, not all the components in the chain have been ported to the
drm_bridge API. Actually, when a panel is attached the default panel's mode
is used, but in some cases we can't get display up if mode getting from
eDP control EDID is not chosen.
This series address that problem, first implements the .get_edid()
callback in the PS8640 driver (which is not used until the conversion is
done) and then, converts the Mediatek DSI driver to use the drm_bridge
API.
As far as I know, we're the only users of the mediatek dsi driver in
mainline, so should be safe to switch to the new chain of drm_bridge API
unconditionally.
The patches has been tested on a Acer Chromebook R13 (Elm) running a
Chrome OS userspace and checking that the valid EDID mode reported by
the bridge is selected.
[1] https://lore.kernel.org/lkml/[email protected]/
Enric Balletbo i Serra (7):
drm/bridge: ps8640: Get the EDID from eDP control
drm/bridge_connector: Set default status connected for eDP connectors
drm/mediatek: mtk_dsi: Rename bridge to next_bridge
drm/mediatek: mtk_dsi: Convert to bridge driver
drm/mediatek: mtk_dsi: Use simple encoder
drm/mediatek: mtk_dsi: Use the drm_panel_bridge API
drm/mediatek: mtk_dsi: Create connector for bridges
drivers/gpu/drm/bridge/parade-ps8640.c | 12 ++
drivers/gpu/drm/drm_bridge_connector.c | 1 +
drivers/gpu/drm/mediatek/mtk_dsi.c | 281 ++++++++-----------------
3 files changed, 102 insertions(+), 192 deletions(-)
--
2.25.1
The PS8640 DSI-to-eDP bridge can retrieve the EDID, so implement the
.get_edid callback and set the flag to indicate the core to use it.
Signed-off-by: Enric Balletbo i Serra <[email protected]>
---
drivers/gpu/drm/bridge/parade-ps8640.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c
index d3a53442d449..956b76e0a44d 100644
--- a/drivers/gpu/drm/bridge/parade-ps8640.c
+++ b/drivers/gpu/drm/bridge/parade-ps8640.c
@@ -242,8 +242,18 @@ static int ps8640_bridge_attach(struct drm_bridge *bridge,
return ret;
}
+static struct edid *ps8640_bridge_get_edid(struct drm_bridge *bridge,
+ struct drm_connector *connector)
+{
+ struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
+
+ return drm_get_edid(connector,
+ ps_bridge->page[PAGE0_DP_CNTL]->adapter);
+}
+
static const struct drm_bridge_funcs ps8640_bridge_funcs = {
.attach = ps8640_bridge_attach,
+ .get_edid = ps8640_bridge_get_edid,
.post_disable = ps8640_post_disable,
.pre_enable = ps8640_pre_enable,
};
@@ -296,6 +306,8 @@ static int ps8640_probe(struct i2c_client *client)
ps_bridge->bridge.funcs = &ps8640_bridge_funcs;
ps_bridge->bridge.of_node = dev->of_node;
+ ps_bridge->bridge.ops = DRM_BRIDGE_OP_EDID;
+ ps_bridge->bridge.type = DRM_MODE_CONNECTOR_eDP;
ps_bridge->page[PAGE0_DP_CNTL] = client;
--
2.25.1
This is really a cosmetic change just to make a bit more readable the
code after convert the driver to drm_bridge. The bridge variable name
will be used by the encoder drm_bridge, and the chained bridge will be
named next_bridge.
Signed-off-by: Enric Balletbo i Serra <[email protected]>
---
drivers/gpu/drm/mediatek/mtk_dsi.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index cfa45d6abd74..44ee884cc31c 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -182,7 +182,7 @@ struct mtk_dsi {
struct drm_encoder encoder;
struct drm_connector conn;
struct drm_panel *panel;
- struct drm_bridge *bridge;
+ struct drm_bridge *next_bridge;
struct phy *phy;
void __iomem *regs;
@@ -903,8 +903,9 @@ static int mtk_dsi_create_conn_enc(struct drm_device *drm, struct mtk_dsi *dsi)
dsi->encoder.possible_crtcs = 1;
/* If there's a bridge, attach to it and let it create the connector */
- if (dsi->bridge) {
- ret = drm_bridge_attach(&dsi->encoder, dsi->bridge, NULL, 0);
+ if (dsi->next_bridge) {
+ ret = drm_bridge_attach(&dsi->encoder, dsi->next_bridge, NULL,
+ 0);
if (ret) {
DRM_ERROR("Failed to attach bridge to drm\n");
goto err_encoder_cleanup;
@@ -1185,7 +1186,7 @@ static int mtk_dsi_probe(struct platform_device *pdev)
}
ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
- &dsi->panel, &dsi->bridge);
+ &dsi->panel, &dsi->next_bridge);
if (ret)
goto err_unregister_host;
--
2.25.1
Replace the manual panel handling code by a drm_panel_bridge. This
simplifies the driver and allows all components in the display pipeline
to be treated as bridges, paving the way to generic connector handling.
Signed-off-by: Enric Balletbo i Serra <[email protected]>
---
drivers/gpu/drm/mediatek/mtk_dsi.c | 178 ++++-------------------------
1 file changed, 20 insertions(+), 158 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index 48361c1e9f34..f9706f306275 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -182,8 +182,7 @@ struct mtk_dsi {
struct mipi_dsi_host host;
struct drm_encoder encoder;
struct drm_bridge bridge;
- struct drm_connector conn;
- struct drm_panel *panel;
+ struct drm_bridge *panel_bridge;
struct drm_bridge *next_bridge;
struct phy *phy;
@@ -212,11 +211,6 @@ static inline struct mtk_dsi *bridge_to_dsi(struct drm_bridge *b)
return container_of(b, struct mtk_dsi, bridge);
}
-static inline struct mtk_dsi *connector_to_dsi(struct drm_connector *c)
-{
- return container_of(c, struct mtk_dsi, conn);
-}
-
static inline struct mtk_dsi *host_to_dsi(struct mipi_dsi_host *h)
{
return container_of(h, struct mtk_dsi, host);
@@ -682,16 +676,7 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi)
mtk_dsi_lane0_ulp_mode_leave(dsi);
mtk_dsi_clk_hs_mode(dsi, 0);
- if (dsi->panel) {
- if (drm_panel_prepare(dsi->panel)) {
- DRM_ERROR("failed to prepare the panel\n");
- goto err_disable_digital_clk;
- }
- }
-
return 0;
-err_disable_digital_clk:
- clk_disable_unprepare(dsi->digital_clk);
err_disable_engine_clk:
clk_disable_unprepare(dsi->engine_clk);
err_phy_power_off:
@@ -718,15 +703,7 @@ static void mtk_dsi_poweroff(struct mtk_dsi *dsi)
*/
mtk_dsi_stop(dsi);
- if (!mtk_dsi_switch_to_cmd_mode(dsi, VM_DONE_INT_FLAG, 500)) {
- if (dsi->panel) {
- if (drm_panel_unprepare(dsi->panel)) {
- DRM_ERROR("failed to unprepare the panel\n");
- return;
- }
- }
- }
-
+ mtk_dsi_switch_to_cmd_mode(dsi, VM_DONE_INT_FLAG, 500);
mtk_dsi_reset_engine(dsi);
mtk_dsi_lane0_ulp_mode_enter(dsi);
mtk_dsi_clk_ulp_mode_enter(dsi);
@@ -757,19 +734,7 @@ static void mtk_output_dsi_enable(struct mtk_dsi *dsi)
mtk_dsi_start(dsi);
- if (dsi->panel) {
- if (drm_panel_enable(dsi->panel)) {
- DRM_ERROR("failed to enable the panel\n");
- goto err_dsi_power_off;
- }
- }
-
dsi->enabled = true;
-
- return;
-err_dsi_power_off:
- mtk_dsi_stop(dsi);
- mtk_dsi_poweroff(dsi);
}
static void mtk_output_dsi_disable(struct mtk_dsi *dsi)
@@ -777,34 +742,24 @@ static void mtk_output_dsi_disable(struct mtk_dsi *dsi)
if (!dsi->enabled)
return;
- if (dsi->panel) {
- if (drm_panel_disable(dsi->panel)) {
- DRM_ERROR("failed to disable the panel\n");
- return;
- }
- }
-
mtk_dsi_poweroff(dsi);
dsi->enabled = false;
}
-static int mtk_dsi_create_conn_enc(struct drm_device *drm, struct mtk_dsi *dsi);
-static void mtk_dsi_destroy_conn_enc(struct mtk_dsi *dsi);
-
static int mtk_dsi_bridge_attach(struct drm_bridge *bridge,
enum drm_bridge_attach_flags flags)
{
struct mtk_dsi *dsi = bridge_to_dsi(bridge);
+ struct drm_bridge *next;
- return mtk_dsi_create_conn_enc(bridge->dev, dsi);
-}
-
-static void mtk_dsi_bridge_detach(struct drm_bridge *bridge)
-{
- struct mtk_dsi *dsi = bridge_to_dsi(bridge);
+ if (dsi->next_bridge)
+ next = dsi->next_bridge;
+ else
+ next = dsi->panel_bridge;
- mtk_dsi_destroy_conn_enc(dsi);
+ /* Attach the panel or bridge to the dsi bridge */
+ return drm_bridge_attach(bridge->encoder, next, &dsi->bridge, flags);
}
static void mtk_dsi_bridge_mode_set(struct drm_bridge *bridge,
@@ -830,101 +785,13 @@ static void mtk_dsi_bridge_enable(struct drm_bridge *bridge)
mtk_output_dsi_enable(dsi);
}
-static int mtk_dsi_connector_get_modes(struct drm_connector *connector)
-{
- struct mtk_dsi *dsi = connector_to_dsi(connector);
-
- return drm_panel_get_modes(dsi->panel, connector);
-}
-
static const struct drm_bridge_funcs mtk_dsi_bridge_funcs = {
.attach = mtk_dsi_bridge_attach,
- .detach = mtk_dsi_bridge_detach,
.disable = mtk_dsi_bridge_disable,
.enable = mtk_dsi_bridge_enable,
.mode_set = mtk_dsi_bridge_mode_set,
};
-static const struct drm_connector_funcs mtk_dsi_connector_funcs = {
- .fill_modes = drm_helper_probe_single_connector_modes,
- .destroy = drm_connector_cleanup,
- .reset = drm_atomic_helper_connector_reset,
- .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
- .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
-};
-
-static const struct drm_connector_helper_funcs
- mtk_dsi_connector_helper_funcs = {
- .get_modes = mtk_dsi_connector_get_modes,
-};
-
-static int mtk_dsi_create_connector(struct drm_device *drm, struct mtk_dsi *dsi)
-{
- int ret;
-
- ret = drm_connector_init(drm, &dsi->conn, &mtk_dsi_connector_funcs,
- DRM_MODE_CONNECTOR_DSI);
- if (ret) {
- DRM_ERROR("Failed to connector init to drm\n");
- return ret;
- }
-
- drm_connector_helper_add(&dsi->conn, &mtk_dsi_connector_helper_funcs);
-
- dsi->conn.dpms = DRM_MODE_DPMS_OFF;
- drm_connector_attach_encoder(&dsi->conn, &dsi->encoder);
-
- if (dsi->panel) {
- ret = drm_panel_attach(dsi->panel, &dsi->conn);
- if (ret) {
- DRM_ERROR("Failed to attach panel to drm\n");
- goto err_connector_cleanup;
- }
- }
-
- return 0;
-
-err_connector_cleanup:
- drm_connector_cleanup(&dsi->conn);
- return ret;
-}
-
-static int mtk_dsi_create_conn_enc(struct drm_device *drm, struct mtk_dsi *dsi)
-{
- int ret;
-
- /* If there's a bridge, attach to it and let it create the connector */
- if (dsi->next_bridge) {
- ret = drm_bridge_attach(&dsi->encoder, dsi->next_bridge, NULL,
- 0);
- if (ret) {
- DRM_ERROR("Failed to attach bridge to drm\n");
- goto err_encoder_cleanup;
- }
- } else {
- /* Otherwise create our own connector and attach to a panel */
- ret = mtk_dsi_create_connector(drm, dsi);
- if (ret)
- goto err_encoder_cleanup;
- }
-
- return 0;
-
-err_encoder_cleanup:
- drm_encoder_cleanup(&dsi->encoder);
- return ret;
-}
-
-static void mtk_dsi_destroy_conn_enc(struct mtk_dsi *dsi)
-{
- drm_encoder_cleanup(&dsi->encoder);
- /* Skip connector cleanup if creation was delegated to the bridge */
- if (dsi->conn.dev)
- drm_connector_cleanup(&dsi->conn);
- if (dsi->panel)
- drm_panel_detach(dsi->panel);
-}
-
static void mtk_dsi_ddp_start(struct mtk_ddp_comp *comp)
{
struct mtk_dsi *dsi = container_of(comp, struct mtk_dsi, ddp_comp);
@@ -953,20 +820,6 @@ static int mtk_dsi_host_attach(struct mipi_dsi_host *host,
dsi->format = device->format;
dsi->mode_flags = device->mode_flags;
- if (dsi->conn.dev)
- drm_helper_hpd_irq_event(dsi->conn.dev);
-
- return 0;
-}
-
-static int mtk_dsi_host_detach(struct mipi_dsi_host *host,
- struct mipi_dsi_device *device)
-{
- struct mtk_dsi *dsi = host_to_dsi(host);
-
- if (dsi->conn.dev)
- drm_helper_hpd_irq_event(dsi->conn.dev);
-
return 0;
}
@@ -1110,7 +963,6 @@ static ssize_t mtk_dsi_host_transfer(struct mipi_dsi_host *host,
static const struct mipi_dsi_host_ops mtk_dsi_ops = {
.attach = mtk_dsi_host_attach,
- .detach = mtk_dsi_host_detach,
.transfer = mtk_dsi_host_transfer,
};
@@ -1184,6 +1036,7 @@ static int mtk_dsi_probe(struct platform_device *pdev)
{
struct mtk_dsi *dsi;
struct device *dev = &pdev->dev;
+ struct drm_panel *panel;
struct resource *regs;
int irq_num;
int comp_id;
@@ -1202,10 +1055,19 @@ static int mtk_dsi_probe(struct platform_device *pdev)
}
ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
- &dsi->panel, &dsi->next_bridge);
+ &panel, &dsi->next_bridge);
if (ret)
goto err_unregister_host;
+ if (panel) {
+ panel->connector_type = DRM_MODE_CONNECTOR_DSI;
+ dsi->panel_bridge = devm_drm_panel_bridge_add(dev, panel);
+ if (IS_ERR(dsi->panel_bridge)) {
+ ret = PTR_ERR(dsi->panel_bridge);
+ goto err_unregister_host;
+ }
+ }
+
dsi->driver_data = of_device_get_match_data(dev);
dsi->engine_clk = devm_clk_get(dev, "engine");
--
2.25.1
Use the drm_bridge_connector helper to create a connector for pipelines
that use drm_bridge. This allows splitting connector operations across
multiple bridges when necessary, instead of having the last bridge in
the chain creating the connector and handling all connector operations
internally.
Signed-off-by: Enric Balletbo i Serra <[email protected]>
---
drivers/gpu/drm/mediatek/mtk_dsi.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index f9706f306275..a36c86e174f4 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -17,6 +17,7 @@
#include <drm/drm_atomic_helper.h>
#include <drm/drm_bridge.h>
+#include <drm/drm_bridge_connector.h>
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_of.h>
#include <drm/drm_panel.h>
@@ -184,6 +185,7 @@ struct mtk_dsi {
struct drm_bridge bridge;
struct drm_bridge *panel_bridge;
struct drm_bridge *next_bridge;
+ struct drm_connector *connector;
struct phy *phy;
void __iomem *regs;
@@ -983,10 +985,19 @@ static int mtk_dsi_encoder_init(struct drm_device *drm, struct mtk_dsi *dsi)
*/
dsi->encoder.possible_crtcs = 1;
- ret = drm_bridge_attach(&dsi->encoder, &dsi->bridge, NULL, 0);
+ ret = drm_bridge_attach(&dsi->encoder, &dsi->bridge, NULL,
+ DRM_BRIDGE_ATTACH_NO_CONNECTOR);
if (ret)
goto err_cleanup_encoder;
+ dsi->connector = drm_bridge_connector_init(drm, &dsi->encoder);
+ if (IS_ERR(dsi->connector)) {
+ DRM_ERROR("Unable to create bridge connector\n");
+ ret = PTR_ERR(dsi->connector);
+ goto err_cleanup_encoder;
+ }
+ drm_connector_attach_encoder(dsi->connector, &dsi->encoder);
+
return 0;
err_cleanup_encoder:
@@ -1145,6 +1156,7 @@ static int mtk_dsi_probe(struct platform_device *pdev)
dsi->bridge.funcs = &mtk_dsi_bridge_funcs;
dsi->bridge.of_node = dev->of_node;
+ dsi->bridge.type = DRM_MODE_CONNECTOR_DSI;
drm_bridge_add(&dsi->bridge);
--
2.25.1
Convert mtk_dsi to a bridge driver with built-in encoder support for
compatibility with existing component drivers.
Signed-off-by: Enric Balletbo i Serra <[email protected]>
---
drivers/gpu/drm/mediatek/mtk_dsi.c | 106 ++++++++++++++++++-----------
1 file changed, 68 insertions(+), 38 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index 44ee884cc31c..3400d6686c85 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -180,6 +180,7 @@ struct mtk_dsi {
struct device *dev;
struct mipi_dsi_host host;
struct drm_encoder encoder;
+ struct drm_bridge bridge;
struct drm_connector conn;
struct drm_panel *panel;
struct drm_bridge *next_bridge;
@@ -205,9 +206,9 @@ struct mtk_dsi {
const struct mtk_dsi_driver_data *driver_data;
};
-static inline struct mtk_dsi *encoder_to_dsi(struct drm_encoder *e)
+static inline struct mtk_dsi *bridge_to_dsi(struct drm_bridge *b)
{
- return container_of(e, struct mtk_dsi, encoder);
+ return container_of(b, struct mtk_dsi, bridge);
}
static inline struct mtk_dsi *connector_to_dsi(struct drm_connector *c)
@@ -796,32 +797,43 @@ static const struct drm_encoder_funcs mtk_dsi_encoder_funcs = {
.destroy = mtk_dsi_encoder_destroy,
};
-static bool mtk_dsi_encoder_mode_fixup(struct drm_encoder *encoder,
- const struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
+static int mtk_dsi_create_conn_enc(struct drm_device *drm, struct mtk_dsi *dsi);
+static void mtk_dsi_destroy_conn_enc(struct mtk_dsi *dsi);
+
+static int mtk_dsi_bridge_attach(struct drm_bridge *bridge,
+ enum drm_bridge_attach_flags flags)
{
- return true;
+ struct mtk_dsi *dsi = bridge_to_dsi(bridge);
+
+ return mtk_dsi_create_conn_enc(bridge->dev, dsi);
+}
+
+static void mtk_dsi_bridge_detach(struct drm_bridge *bridge)
+{
+ struct mtk_dsi *dsi = bridge_to_dsi(bridge);
+
+ mtk_dsi_destroy_conn_enc(dsi);
}
-static void mtk_dsi_encoder_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted)
+static void mtk_dsi_bridge_mode_set(struct drm_bridge *bridge,
+ const struct drm_display_mode *mode,
+ const struct drm_display_mode *adjusted)
{
- struct mtk_dsi *dsi = encoder_to_dsi(encoder);
+ struct mtk_dsi *dsi = bridge_to_dsi(bridge);
drm_display_mode_to_videomode(adjusted, &dsi->vm);
}
-static void mtk_dsi_encoder_disable(struct drm_encoder *encoder)
+static void mtk_dsi_bridge_disable(struct drm_bridge *bridge)
{
- struct mtk_dsi *dsi = encoder_to_dsi(encoder);
+ struct mtk_dsi *dsi = bridge_to_dsi(bridge);
mtk_output_dsi_disable(dsi);
}
-static void mtk_dsi_encoder_enable(struct drm_encoder *encoder)
+static void mtk_dsi_bridge_enable(struct drm_bridge *bridge)
{
- struct mtk_dsi *dsi = encoder_to_dsi(encoder);
+ struct mtk_dsi *dsi = bridge_to_dsi(bridge);
mtk_output_dsi_enable(dsi);
}
@@ -833,11 +845,12 @@ static int mtk_dsi_connector_get_modes(struct drm_connector *connector)
return drm_panel_get_modes(dsi->panel, connector);
}
-static const struct drm_encoder_helper_funcs mtk_dsi_encoder_helper_funcs = {
- .mode_fixup = mtk_dsi_encoder_mode_fixup,
- .mode_set = mtk_dsi_encoder_mode_set,
- .disable = mtk_dsi_encoder_disable,
- .enable = mtk_dsi_encoder_enable,
+static const struct drm_bridge_funcs mtk_dsi_bridge_funcs = {
+ .attach = mtk_dsi_bridge_attach,
+ .detach = mtk_dsi_bridge_detach,
+ .disable = mtk_dsi_bridge_disable,
+ .enable = mtk_dsi_bridge_enable,
+ .mode_set = mtk_dsi_bridge_mode_set,
};
static const struct drm_connector_funcs mtk_dsi_connector_funcs = {
@@ -888,20 +901,6 @@ static int mtk_dsi_create_conn_enc(struct drm_device *drm, struct mtk_dsi *dsi)
{
int ret;
- ret = drm_encoder_init(drm, &dsi->encoder, &mtk_dsi_encoder_funcs,
- DRM_MODE_ENCODER_DSI, NULL);
- if (ret) {
- DRM_ERROR("Failed to encoder init to drm\n");
- return ret;
- }
- drm_encoder_helper_add(&dsi->encoder, &mtk_dsi_encoder_helper_funcs);
-
- /*
- * Currently display data paths are statically assigned to a crtc each.
- * crtc 0 is OVL0 -> COLOR0 -> AAL -> OD -> RDMA0 -> UFOE -> DSI0
- */
- dsi->encoder.possible_crtcs = 1;
-
/* If there's a bridge, attach to it and let it create the connector */
if (dsi->next_bridge) {
ret = drm_bridge_attach(&dsi->encoder, dsi->next_bridge, NULL,
@@ -1123,6 +1122,34 @@ static const struct mipi_dsi_host_ops mtk_dsi_ops = {
.transfer = mtk_dsi_host_transfer,
};
+static int mtk_dsi_encoder_init(struct drm_device *drm, struct mtk_dsi *dsi)
+{
+ int ret;
+
+ ret = drm_encoder_init(drm, &dsi->encoder, &mtk_dsi_encoder_funcs,
+ DRM_MODE_ENCODER_DSI, NULL);
+ if (ret) {
+ DRM_ERROR("Failed to encoder init to drm\n");
+ return ret;
+ }
+
+ /*
+ * Currently display data paths are statically assigned to a crtc each.
+ * crtc 0 is OVL0 -> COLOR0 -> AAL -> OD -> RDMA0 -> UFOE -> DSI0
+ */
+ dsi->encoder.possible_crtcs = 1;
+
+ ret = drm_bridge_attach(&dsi->encoder, &dsi->bridge, NULL, 0);
+ if (ret)
+ goto err_cleanup_encoder;
+
+ return 0;
+
+err_cleanup_encoder:
+ drm_encoder_cleanup(&dsi->encoder);
+ return ret;
+}
+
static int mtk_dsi_bind(struct device *dev, struct device *master, void *data)
{
int ret;
@@ -1136,11 +1163,9 @@ static int mtk_dsi_bind(struct device *dev, struct device *master, void *data)
return ret;
}
- ret = mtk_dsi_create_conn_enc(drm, dsi);
- if (ret) {
- DRM_ERROR("Encoder create failed with %d\n", ret);
+ ret = mtk_dsi_encoder_init(drm, dsi);
+ if (ret)
goto err_unregister;
- }
return 0;
@@ -1155,7 +1180,6 @@ static void mtk_dsi_unbind(struct device *dev, struct device *master,
struct drm_device *drm = data;
struct mtk_dsi *dsi = dev_get_drvdata(dev);
- mtk_dsi_destroy_conn_enc(dsi);
mtk_ddp_comp_unregister(drm, &dsi->ddp_comp);
}
@@ -1265,6 +1289,11 @@ static int mtk_dsi_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, dsi);
+ dsi->bridge.funcs = &mtk_dsi_bridge_funcs;
+ dsi->bridge.of_node = dev->of_node;
+
+ drm_bridge_add(&dsi->bridge);
+
ret = component_add(&pdev->dev, &mtk_dsi_component_ops);
if (ret) {
dev_err(&pdev->dev, "failed to add component: %d\n", ret);
@@ -1283,6 +1312,7 @@ static int mtk_dsi_remove(struct platform_device *pdev)
struct mtk_dsi *dsi = platform_get_drvdata(pdev);
mtk_output_dsi_disable(dsi);
+ drm_bridge_remove(&dsi->bridge);
component_del(&pdev->dev, &mtk_dsi_component_ops);
mipi_dsi_host_unregister(&dsi->host);
--
2.25.1
In an eDP application, HPD is not required and on most bridge chips
useless. If HPD is not used, we need to set initial status as connected,
otherwise the connector created by the drm_bridge_connector API remains
in an unknown state.
Signed-off-by: Enric Balletbo i Serra <[email protected]>
---
drivers/gpu/drm/drm_bridge_connector.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/drm_bridge_connector.c b/drivers/gpu/drm/drm_bridge_connector.c
index c6994fe673f3..a58cbde59c34 100644
--- a/drivers/gpu/drm/drm_bridge_connector.c
+++ b/drivers/gpu/drm/drm_bridge_connector.c
@@ -187,6 +187,7 @@ drm_bridge_connector_detect(struct drm_connector *connector, bool force)
case DRM_MODE_CONNECTOR_DPI:
case DRM_MODE_CONNECTOR_LVDS:
case DRM_MODE_CONNECTOR_DSI:
+ case DRM_MODE_CONNECTOR_eDP:
status = connector_status_connected;
break;
default:
--
2.25.1
The mtk_dsi driver uses an empty implementation for its encoder. Replace
the code with the generic simple encoder.
Signed-off-by: Enric Balletbo i Serra <[email protected]>
---
drivers/gpu/drm/mediatek/mtk_dsi.c | 14 +++-----------
1 file changed, 3 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index 3400d6686c85..48361c1e9f34 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -22,6 +22,7 @@
#include <drm/drm_panel.h>
#include <drm/drm_print.h>
#include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
#include "mtk_drm_ddp_comp.h"
@@ -788,15 +789,6 @@ static void mtk_output_dsi_disable(struct mtk_dsi *dsi)
dsi->enabled = false;
}
-static void mtk_dsi_encoder_destroy(struct drm_encoder *encoder)
-{
- drm_encoder_cleanup(encoder);
-}
-
-static const struct drm_encoder_funcs mtk_dsi_encoder_funcs = {
- .destroy = mtk_dsi_encoder_destroy,
-};
-
static int mtk_dsi_create_conn_enc(struct drm_device *drm, struct mtk_dsi *dsi);
static void mtk_dsi_destroy_conn_enc(struct mtk_dsi *dsi);
@@ -1126,8 +1118,8 @@ static int mtk_dsi_encoder_init(struct drm_device *drm, struct mtk_dsi *dsi)
{
int ret;
- ret = drm_encoder_init(drm, &dsi->encoder, &mtk_dsi_encoder_funcs,
- DRM_MODE_ENCODER_DSI, NULL);
+ ret = drm_simple_encoder_init(drm, &dsi->encoder,
+ DRM_MODE_ENCODER_DSI);
if (ret) {
DRM_ERROR("Failed to encoder init to drm\n");
return ret;
--
2.25.1
Hi Enric.
Just a "drive-by" comment.
I browsed all the patches - and nothing jumped at me.
But then I did not follow all the changes.
> @@ -1202,10 +1055,19 @@ static int mtk_dsi_probe(struct platform_device *pdev)
> }
>
> ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
> - &dsi->panel, &dsi->next_bridge);
> + &panel, &dsi->next_bridge);
> if (ret)
> goto err_unregister_host;
>
> + if (panel) {
> + panel->connector_type = DRM_MODE_CONNECTOR_DSI;
This assignment of panel->connector_type is wrong.
We should let the panel tell the type of connector.
And if the panel fails to do so - then fix it in the panel.
One day, when I get sufficiently bored/motivated I plan to go through
all panels to make sure they all update connector_type.
Sam
> + dsi->panel_bridge = devm_drm_panel_bridge_add(dev, panel);
> + if (IS_ERR(dsi->panel_bridge)) {
> + ret = PTR_ERR(dsi->panel_bridge);
> + goto err_unregister_host;
> + }
> + }
> +
> dsi->driver_data = of_device_get_match_data(dev);
>
> dsi->engine_clk = devm_clk_get(dev, "engine");
> --
> 2.25.1
>
> _______________________________________________
> dri-devel mailing list
> [email protected]
> https://lists.freedesktop.org/mailman/listinfo/dri-devel