2020-04-08 08:16:48

by Hsin-Hsiung Wang

[permalink] [raw]
Subject: [PATCH v12 0/6] Add Support for MediaTek PMIC MT6358

This patchset including modifying suspend/resume behavior and trimming probe function add support to MT6358 PMIC.
MT6358 is the primary PMIC for MT8183 platform.

changes since v11:
- add a new patch to trim probe function more cleanly.
- fix some coverity defects.
- update some comment messages.
- fix wrong sizeof argument.

Hsin-Hsiung Wang (5):
mfd: mt6397: Modify suspend/resume behavior
mfd: mt6397: Trim probe function to support different chips more
cleanly
dt-bindings: mfd: Add compatible for the MediaTek MT6358 PMIC
mfd: Add support for the MediaTek MT6358 PMIC
arm64: dts: mt6358: add PMIC MT6358 related nodes

Ran Bi (1):
rtc: mt6397: Add support for the MediaTek MT6358 RTC

Documentation/devicetree/bindings/mfd/mt6397.txt | 14 +-
arch/arm64/boot/dts/mediatek/mt6358.dtsi | 358 +++++++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt8183-evb.dts | 1 +
drivers/mfd/Makefile | 2 +-
drivers/mfd/mt6358-irq.c | 235 +++++++++++++++
drivers/mfd/mt6397-core.c | 101 ++++---
drivers/mfd/mt6397-irq.c | 35 ++-
drivers/power/reset/mt6323-poweroff.c | 2 +-
drivers/rtc/rtc-mt6397.c | 18 +-
include/linux/mfd/mt6358/core.h | 158 ++++++++++
include/linux/mfd/mt6358/registers.h | 282 ++++++++++++++++++
include/linux/mfd/mt6397/core.h | 5 +
include/linux/mfd/mt6397/rtc.h | 9 +-
13 files changed, 1158 insertions(+), 62 deletions(-)
create mode 100644 arch/arm64/boot/dts/mediatek/mt6358.dtsi
create mode 100644 drivers/mfd/mt6358-irq.c
create mode 100644 include/linux/mfd/mt6358/core.h
create mode 100644 include/linux/mfd/mt6358/registers.h

--
2.6.4


2020-04-08 08:43:53

by Hsin-Hsiung Wang

[permalink] [raw]
Subject: [PATCH v12 2/6] mfd: mt6397: Trim probe function to support different chips more cleanly

Add new struct members for mfd-cells and irq initial function, so we can
call devm_mfd_add_devices() only once.

Signed-off-by: Hsin-Hsiung Wang <[email protected]>
---
drivers/mfd/mt6397-core.c | 35 ++++++++++++++---------------------
1 file changed, 14 insertions(+), 21 deletions(-)

diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
index d2e70d8..a313a72 100644
--- a/drivers/mfd/mt6397-core.c
+++ b/drivers/mfd/mt6397-core.c
@@ -103,22 +103,31 @@ static const struct mfd_cell mt6397_devs[] = {
struct chip_data {
u32 cid_addr;
u32 cid_shift;
+ const struct mfd_cell *cells;
+ int cell_size;
+ int (*irq_init)(struct mt6397_chip *chip);
};

static const struct chip_data mt6323_core = {
.cid_addr = MT6323_CID,
.cid_shift = 0,
+ .cells = mt6323_devs,
+ .cell_size = ARRAY_SIZE(mt6323_devs),
+ .irq_init = mt6397_irq_init,
};

static const struct chip_data mt6397_core = {
.cid_addr = MT6397_CID,
.cid_shift = 0,
+ .cells = mt6397_devs,
+ .cell_size = ARRAY_SIZE(mt6397_devs),
+ .irq_init = mt6397_irq_init,
};

static int mt6397_probe(struct platform_device *pdev)
{
int ret;
- unsigned int id;
+ unsigned int id = 0;
struct mt6397_chip *pmic;
const struct chip_data *pmic_core;

@@ -154,29 +163,13 @@ static int mt6397_probe(struct platform_device *pdev)
if (pmic->irq <= 0)
return pmic->irq;

- ret = mt6397_irq_init(pmic);
+ ret = pmic_core->irq_init(pmic);
if (ret)
return ret;

- switch (pmic->chip_id) {
- case MT6323_CHIP_ID:
- ret = devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE,
- mt6323_devs, ARRAY_SIZE(mt6323_devs),
- NULL, 0, pmic->irq_domain);
- break;
-
- case MT6391_CHIP_ID:
- case MT6397_CHIP_ID:
- ret = devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE,
- mt6397_devs, ARRAY_SIZE(mt6397_devs),
- NULL, 0, pmic->irq_domain);
- break;
-
- default:
- dev_err(&pdev->dev, "unsupported chip: %d\n", pmic->chip_id);
- return -ENODEV;
- }
-
+ ret = devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE,
+ pmic_core->cells, pmic_core->cell_size,
+ NULL, 0, pmic->irq_domain);
if (ret) {
irq_domain_remove(pmic->irq_domain);
dev_err(&pdev->dev, "failed to add child devices: %d\n", ret);
--
2.6.4

2020-04-08 08:50:10

by Hsin-Hsiung Wang

[permalink] [raw]
Subject: [PATCH v12 1/6] mfd: mt6397: Modify suspend/resume behavior

Some pmics don't need backup interrupt settings, so we change to use
pm notifier for the pmics which are necessary to store settings.

Signed-off-by: Hsin-Hsiung Wang <[email protected]>
---
drivers/mfd/mt6397-core.c | 30 ------------------------------
drivers/mfd/mt6397-irq.c | 35 ++++++++++++++++++++++++++++++++++-
include/linux/mfd/mt6397/core.h | 2 ++
3 files changed, 36 insertions(+), 31 deletions(-)

diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
index 0437c85..d2e70d8 100644
--- a/drivers/mfd/mt6397-core.c
+++ b/drivers/mfd/mt6397-core.c
@@ -100,35 +100,6 @@ static const struct mfd_cell mt6397_devs[] = {
}
};

-#ifdef CONFIG_PM_SLEEP
-static int mt6397_irq_suspend(struct device *dev)
-{
- struct mt6397_chip *chip = dev_get_drvdata(dev);
-
- regmap_write(chip->regmap, chip->int_con[0], chip->wake_mask[0]);
- regmap_write(chip->regmap, chip->int_con[1], chip->wake_mask[1]);
-
- enable_irq_wake(chip->irq);
-
- return 0;
-}
-
-static int mt6397_irq_resume(struct device *dev)
-{
- struct mt6397_chip *chip = dev_get_drvdata(dev);
-
- regmap_write(chip->regmap, chip->int_con[0], chip->irq_masks_cur[0]);
- regmap_write(chip->regmap, chip->int_con[1], chip->irq_masks_cur[1]);
-
- disable_irq_wake(chip->irq);
-
- return 0;
-}
-#endif
-
-static SIMPLE_DEV_PM_OPS(mt6397_pm_ops, mt6397_irq_suspend,
- mt6397_irq_resume);
-
struct chip_data {
u32 cid_addr;
u32 cid_shift;
@@ -238,7 +209,6 @@ static struct platform_driver mt6397_driver = {
.driver = {
.name = "mt6397",
.of_match_table = of_match_ptr(mt6397_of_match),
- .pm = &mt6397_pm_ops,
},
.id_table = mt6397_id,
};
diff --git a/drivers/mfd/mt6397-irq.c b/drivers/mfd/mt6397-irq.c
index b2d3ce1..2924919 100644
--- a/drivers/mfd/mt6397-irq.c
+++ b/drivers/mfd/mt6397-irq.c
@@ -9,6 +9,7 @@
#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include <linux/suspend.h>
#include <linux/mfd/mt6323/core.h>
#include <linux/mfd/mt6323/registers.h>
#include <linux/mfd/mt6397/core.h>
@@ -81,7 +82,7 @@ static struct irq_chip mt6397_irq_chip = {
static void mt6397_irq_handle_reg(struct mt6397_chip *mt6397, int reg,
int irqbase)
{
- unsigned int status;
+ unsigned int status = 0;
int i, irq, ret;

ret = regmap_read(mt6397->regmap, reg, &status);
@@ -128,6 +129,36 @@ static const struct irq_domain_ops mt6397_irq_domain_ops = {
.map = mt6397_irq_domain_map,
};

+static int mt6397_irq_pm_notifier(struct notifier_block *notifier,
+ unsigned long pm_event, void *unused)
+{
+ struct mt6397_chip *chip =
+ container_of(notifier, struct mt6397_chip, pm_nb);
+
+ switch (pm_event) {
+ case PM_SUSPEND_PREPARE:
+ regmap_write(chip->regmap,
+ chip->int_con[0], chip->wake_mask[0]);
+ regmap_write(chip->regmap,
+ chip->int_con[1], chip->wake_mask[1]);
+ enable_irq_wake(chip->irq);
+ break;
+
+ case PM_POST_SUSPEND:
+ regmap_write(chip->regmap,
+ chip->int_con[0], chip->irq_masks_cur[0]);
+ regmap_write(chip->regmap,
+ chip->int_con[1], chip->irq_masks_cur[1]);
+ disable_irq_wake(chip->irq);
+ break;
+
+ default:
+ break;
+ }
+
+ return NOTIFY_DONE;
+}
+
int mt6397_irq_init(struct mt6397_chip *chip)
{
int ret;
@@ -159,6 +190,7 @@ int mt6397_irq_init(struct mt6397_chip *chip)
regmap_write(chip->regmap, chip->int_con[0], 0x0);
regmap_write(chip->regmap, chip->int_con[1], 0x0);

+ chip->pm_nb.notifier_call = mt6397_irq_pm_notifier;
chip->irq_domain = irq_domain_add_linear(chip->dev->of_node,
MT6397_IRQ_NR,
&mt6397_irq_domain_ops,
@@ -177,5 +209,6 @@ int mt6397_irq_init(struct mt6397_chip *chip)
return ret;
}

+ register_pm_notifier(&chip->pm_nb);
return 0;
}
diff --git a/include/linux/mfd/mt6397/core.h b/include/linux/mfd/mt6397/core.h
index fc88d31..b81d333 100644
--- a/include/linux/mfd/mt6397/core.h
+++ b/include/linux/mfd/mt6397/core.h
@@ -8,6 +8,7 @@
#define __MFD_MT6397_CORE_H__

#include <linux/mutex.h>
+#include <linux/notifier.h>

enum chip_id {
MT6323_CHIP_ID = 0x23,
@@ -54,6 +55,7 @@ enum mt6397_irq_numbers {
struct mt6397_chip {
struct device *dev;
struct regmap *regmap;
+ struct notifier_block pm_nb;
int irq;
struct irq_domain *irq_domain;
struct mutex irqlock;
--
2.6.4

2020-04-08 08:50:19

by Hsin-Hsiung Wang

[permalink] [raw]
Subject: [PATCH v12 6/6] arm64: dts: mt6358: add PMIC MT6358 related nodes

add PMIC MT6358 related nodes which is for MT8183 platform

Signed-off-by: Hsin-Hsiung Wang <[email protected]>
---
arch/arm64/boot/dts/mediatek/mt6358.dtsi | 358 ++++++++++++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt8183-evb.dts | 1 +
2 files changed, 359 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt6358.dtsi

diff --git a/arch/arm64/boot/dts/mediatek/mt6358.dtsi b/arch/arm64/boot/dts/mediatek/mt6358.dtsi
new file mode 100644
index 0000000..2afebd7
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6358.dtsi
@@ -0,0 +1,358 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ */
+
+&pwrap {
+ pmic: mt6358 {
+ compatible = "mediatek,mt6358";
+ interrupt-controller;
+ interrupt-parent = <&pio>;
+ interrupts = <182 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+
+ mt6358codec: mt6358codec {
+ compatible = "mediatek,mt6358-sound";
+ };
+
+ mt6358regulator: mt6358regulator {
+ mt6358_vdram1_reg: buck_vdram1 {
+ regulator-name = "vdram1";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2087500>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <0>;
+ regulator-always-on;
+ regulator-allowed-modes = <0 1>;
+ };
+
+ mt6358_vcore_reg: buck_vcore {
+ regulator-name = "vcore";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1293750>;
+ regulator-ramp-delay = <6250>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-always-on;
+ regulator-allowed-modes = <0 1>;
+ };
+
+ mt6358_vpa_reg: buck_vpa {
+ regulator-name = "vpa";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <3650000>;
+ regulator-ramp-delay = <50000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-allowed-modes = <0 1>;
+ };
+
+ mt6358_vproc11_reg: buck_vproc11 {
+ regulator-name = "vproc11";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1293750>;
+ regulator-ramp-delay = <6250>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-always-on;
+ regulator-allowed-modes = <0 1>;
+ };
+
+ mt6358_vproc12_reg: buck_vproc12 {
+ regulator-name = "vproc12";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1293750>;
+ regulator-ramp-delay = <6250>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-always-on;
+ regulator-allowed-modes = <0 1>;
+ };
+
+ mt6358_vgpu_reg: buck_vgpu {
+ regulator-name = "vgpu";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1293750>;
+ regulator-ramp-delay = <6250>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-allowed-modes = <0 1>;
+ };
+
+ mt6358_vs2_reg: buck_vs2 {
+ regulator-name = "vs2";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2087500>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <0>;
+ regulator-always-on;
+ };
+
+ mt6358_vmodem_reg: buck_vmodem {
+ regulator-name = "vmodem";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1293750>;
+ regulator-ramp-delay = <6250>;
+ regulator-enable-ramp-delay = <900>;
+ regulator-always-on;
+ regulator-allowed-modes = <0 1>;
+ };
+
+ mt6358_vs1_reg: buck_vs1 {
+ regulator-name = "vs1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <2587500>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <0>;
+ regulator-always-on;
+ };
+
+ mt6358_vdram2_reg: ldo_vdram2 {
+ regulator-name = "vdram2";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <3300>;
+ };
+
+ mt6358_vsim1_reg: ldo_vsim1 {
+ regulator-name = "vsim1";
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-enable-ramp-delay = <540>;
+ };
+
+ mt6358_vibr_reg: ldo_vibr {
+ regulator-name = "vibr";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <60>;
+ };
+
+ mt6358_vrf12_reg: ldo_vrf12 {
+ compatible = "regulator-fixed";
+ regulator-name = "vrf12";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ mt6358_vio18_reg: ldo_vio18 {
+ compatible = "regulator-fixed";
+ regulator-name = "vio18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <2700>;
+ regulator-always-on;
+ };
+
+ mt6358_vusb_reg: ldo_vusb {
+ regulator-name = "vusb";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-enable-ramp-delay = <270>;
+ regulator-always-on;
+ };
+
+ mt6358_vcamio_reg: ldo_vcamio {
+ compatible = "regulator-fixed";
+ regulator-name = "vcamio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <325>;
+ };
+
+ mt6358_vcamd_reg: ldo_vcamd {
+ regulator-name = "vcamd";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <325>;
+ };
+
+ mt6358_vcn18_reg: ldo_vcn18 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcn18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6358_vfe28_reg: ldo_vfe28 {
+ compatible = "regulator-fixed";
+ regulator-name = "vfe28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6358_vsram_proc11_reg: ldo_vsram_proc11 {
+ regulator-name = "vsram_proc11";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1293750>;
+ regulator-ramp-delay = <6250>;
+ regulator-enable-ramp-delay = <240>;
+ regulator-always-on;
+ };
+
+ mt6358_vcn28_reg: ldo_vcn28 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcn28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6358_vsram_others_reg: ldo_vsram_others {
+ regulator-name = "vsram_others";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1293750>;
+ regulator-ramp-delay = <6250>;
+ regulator-enable-ramp-delay = <240>;
+ regulator-always-on;
+ };
+
+ mt6358_vsram_gpu_reg: ldo_vsram_gpu {
+ regulator-name = "vsram_gpu";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1293750>;
+ regulator-ramp-delay = <6250>;
+ regulator-enable-ramp-delay = <240>;
+ };
+
+ mt6358_vxo22_reg: ldo_vxo22 {
+ compatible = "regulator-fixed";
+ regulator-name = "vxo22";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-enable-ramp-delay = <120>;
+ regulator-always-on;
+ };
+
+ mt6358_vefuse_reg: ldo_vefuse {
+ regulator-name = "vefuse";
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6358_vaux18_reg: ldo_vaux18 {
+ compatible = "regulator-fixed";
+ regulator-name = "vaux18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6358_vmch_reg: ldo_vmch {
+ regulator-name = "vmch";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <60>;
+ };
+
+ mt6358_vbif28_reg: ldo_vbif28 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbif28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6358_vsram_proc12_reg: ldo_vsram_proc12 {
+ regulator-name = "vsram_proc12";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1293750>;
+ regulator-ramp-delay = <6250>;
+ regulator-enable-ramp-delay = <240>;
+ regulator-always-on;
+ };
+
+ mt6358_vcama1_reg: ldo_vcama1 {
+ regulator-name = "vcama1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <325>;
+ };
+
+ mt6358_vemc_reg: ldo_vemc {
+ regulator-name = "vemc";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <60>;
+ };
+
+ mt6358_vio28_reg: ldo_vio28 {
+ compatible = "regulator-fixed";
+ regulator-name = "vio28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6358_va12_reg: ldo_va12 {
+ compatible = "regulator-fixed";
+ regulator-name = "va12";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-enable-ramp-delay = <270>;
+ regulator-always-on;
+ };
+
+ mt6358_vrf18_reg: ldo_vrf18 {
+ compatible = "regulator-fixed";
+ regulator-name = "vrf18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ mt6358_vcn33_bt_reg: ldo_vcn33_bt {
+ regulator-name = "vcn33_bt";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3500000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6358_vcn33_wifi_reg: ldo_vcn33_wifi {
+ regulator-name = "vcn33_wifi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3500000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6358_vcama2_reg: ldo_vcama2 {
+ regulator-name = "vcama2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <325>;
+ };
+
+ mt6358_vmc_reg: ldo_vmc {
+ regulator-name = "vmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <60>;
+ };
+
+ mt6358_vldo28_reg: ldo_vldo28 {
+ regulator-name = "vldo28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6358_vaud28_reg: ldo_vaud28 {
+ compatible = "regulator-fixed";
+ regulator-name = "vaud28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6358_vsim2_reg: ldo_vsim2 {
+ regulator-name = "vsim2";
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-enable-ramp-delay = <540>;
+ };
+ };
+
+ mt6358rtc: mt6358rtc {
+ compatible = "mediatek,mt6358-rtc";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
index 1fb195c..9eb84d7 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
@@ -7,6 +7,7 @@

/dts-v1/;
#include "mt8183.dtsi"
+#include "mt6358.dtsi"

/ {
model = "MediaTek MT8183 evaluation board";
--
2.6.4

2020-04-08 08:52:02

by Hsin-Hsiung Wang

[permalink] [raw]
Subject: [PATCH v12 5/6] rtc: mt6397: Add support for the MediaTek MT6358 RTC

From: Ran Bi <[email protected]>

This add support for the MediaTek MT6358 RTC. Driver using
compatible data to store different RTC_WRTGR address offset.
This replace RTC_WRTGR to RTC_WRTGR_MT6323 in mt6323-poweroff
driver which only needed by armv7 CPU without ATF.

Reviewed-by: Nicolas Boichat <[email protected]>
Reviewed-by: Yingjoe Chen <[email protected]>
Acked-by: Alexandre Belloni <[email protected]>
Acked-by: Sebastian Reichel <[email protected]>
Signed-off-by: Ran Bi <[email protected]>
Signed-off-by: Hsin-Hsiung Wang <[email protected]>
---
drivers/power/reset/mt6323-poweroff.c | 2 +-
drivers/rtc/rtc-mt6397.c | 18 +++++++++++++++---
include/linux/mfd/mt6397/rtc.h | 9 ++++++++-
3 files changed, 24 insertions(+), 5 deletions(-)

diff --git a/drivers/power/reset/mt6323-poweroff.c b/drivers/power/reset/mt6323-poweroff.c
index 1caf43d..0532803 100644
--- a/drivers/power/reset/mt6323-poweroff.c
+++ b/drivers/power/reset/mt6323-poweroff.c
@@ -30,7 +30,7 @@ static void mt6323_do_pwroff(void)
int ret;

regmap_write(pwrc->regmap, pwrc->base + RTC_BBPU, RTC_BBPU_KEY);
- regmap_write(pwrc->regmap, pwrc->base + RTC_WRTGR, 1);
+ regmap_write(pwrc->regmap, pwrc->base + RTC_WRTGR_MT6323, 1);

ret = regmap_read_poll_timeout(pwrc->regmap,
pwrc->base + RTC_BBPU, val,
diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
index cda238d..f8b1353 100644
--- a/drivers/rtc/rtc-mt6397.c
+++ b/drivers/rtc/rtc-mt6397.c
@@ -9,6 +9,7 @@
#include <linux/mfd/mt6397/core.h>
#include <linux/module.h>
#include <linux/mutex.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/rtc.h>
@@ -20,7 +21,7 @@ static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
int ret;
u32 data;

- ret = regmap_write(rtc->regmap, rtc->addr_base + RTC_WRTGR, 1);
+ ret = regmap_write(rtc->regmap, rtc->addr_base + rtc->data->wrtgr, 1);
if (ret < 0)
return ret;

@@ -269,6 +270,8 @@ static int mtk_rtc_probe(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
rtc->addr_base = res->start;

+ rtc->data = of_device_get_match_data(&pdev->dev);
+
rtc->irq = platform_get_irq(pdev, 0);
if (rtc->irq < 0)
return rtc->irq;
@@ -325,9 +328,18 @@ static int mt6397_rtc_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(mt6397_pm_ops, mt6397_rtc_suspend,
mt6397_rtc_resume);

+static const struct mtk_rtc_data mt6358_rtc_data = {
+ .wrtgr = RTC_WRTGR_MT6358,
+};
+
+static const struct mtk_rtc_data mt6397_rtc_data = {
+ .wrtgr = RTC_WRTGR_MT6397,
+};
+
static const struct of_device_id mt6397_rtc_of_match[] = {
- { .compatible = "mediatek,mt6323-rtc", },
- { .compatible = "mediatek,mt6397-rtc", },
+ { .compatible = "mediatek,mt6323-rtc", .data = &mt6397_rtc_data },
+ { .compatible = "mediatek,mt6358-rtc", .data = &mt6358_rtc_data },
+ { .compatible = "mediatek,mt6397-rtc", .data = &mt6397_rtc_data },
{ }
};
MODULE_DEVICE_TABLE(of, mt6397_rtc_of_match);
diff --git a/include/linux/mfd/mt6397/rtc.h b/include/linux/mfd/mt6397/rtc.h
index 7dfb63b..6200f3b 100644
--- a/include/linux/mfd/mt6397/rtc.h
+++ b/include/linux/mfd/mt6397/rtc.h
@@ -18,7 +18,9 @@
#define RTC_BBPU_CBUSY BIT(6)
#define RTC_BBPU_KEY (0x43 << 8)

-#define RTC_WRTGR 0x003c
+#define RTC_WRTGR_MT6358 0x3a
+#define RTC_WRTGR_MT6397 0x3c
+#define RTC_WRTGR_MT6323 RTC_WRTGR_MT6397

#define RTC_IRQ_STA 0x0002
#define RTC_IRQ_STA_AL BIT(0)
@@ -65,6 +67,10 @@
#define MTK_RTC_POLL_DELAY_US 10
#define MTK_RTC_POLL_TIMEOUT (jiffies_to_usecs(HZ))

+struct mtk_rtc_data {
+ u32 wrtgr;
+};
+
struct mt6397_rtc {
struct device *dev;
struct rtc_device *rtc_dev;
@@ -74,6 +80,7 @@ struct mt6397_rtc {
struct regmap *regmap;
int irq;
u32 addr_base;
+ const struct mtk_rtc_data *data;
};

#endif /* _LINUX_MFD_MT6397_RTC_H_ */
--
2.6.4

2020-04-08 09:33:25

by Hsin-Hsiung Wang

[permalink] [raw]
Subject: [PATCH v12 4/6] mfd: Add support for the MediaTek MT6358 PMIC

This adds support for the MediaTek MT6358 PMIC. This is a
multifunction device with the following sub modules:

- Regulator
- RTC
- Codec
- Interrupt

It is interfaced to the host controller using SPI interface
by a proprietary hardware called PMIC wrapper or pwrap.
MT6358 MFD is a child device of the pwrap.

Signed-off-by: Hsin-Hsiung Wang <[email protected]>
---
drivers/mfd/Makefile | 2 +-
drivers/mfd/mt6358-irq.c | 235 +++++++++++++++++++++++++++++
drivers/mfd/mt6397-core.c | 36 +++++
include/linux/mfd/mt6358/core.h | 158 ++++++++++++++++++++
include/linux/mfd/mt6358/registers.h | 282 +++++++++++++++++++++++++++++++++++
include/linux/mfd/mt6397/core.h | 3 +
6 files changed, 715 insertions(+), 1 deletion(-)
create mode 100644 drivers/mfd/mt6358-irq.c
create mode 100644 include/linux/mfd/mt6358/core.h
create mode 100644 include/linux/mfd/mt6358/registers.h

diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index b83f172..9af1414 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -238,7 +238,7 @@ obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
obj-$(CONFIG_INTEL_SOC_PMIC_BXTWC) += intel_soc_pmic_bxtwc.o
obj-$(CONFIG_INTEL_SOC_PMIC_CHTWC) += intel_soc_pmic_chtwc.o
obj-$(CONFIG_INTEL_SOC_PMIC_CHTDC_TI) += intel_soc_pmic_chtdc_ti.o
-mt6397-objs := mt6397-core.o mt6397-irq.o
+mt6397-objs := mt6397-core.o mt6397-irq.o mt6358-irq.o
obj-$(CONFIG_MFD_MT6397) += mt6397.o
obj-$(CONFIG_INTEL_SOC_PMIC_MRFLD) += intel_soc_pmic_mrfld.o

diff --git a/drivers/mfd/mt6358-irq.c b/drivers/mfd/mt6358-irq.c
new file mode 100644
index 0000000..db734f2
--- /dev/null
+++ b/drivers/mfd/mt6358-irq.c
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2020 MediaTek Inc.
+
+#include <linux/interrupt.h>
+#include <linux/mfd/mt6358/core.h>
+#include <linux/mfd/mt6358/registers.h>
+#include <linux/mfd/mt6397/core.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+static struct irq_top_t mt6358_ints[] = {
+ MT6358_TOP_GEN(BUCK),
+ MT6358_TOP_GEN(LDO),
+ MT6358_TOP_GEN(PSC),
+ MT6358_TOP_GEN(SCK),
+ MT6358_TOP_GEN(BM),
+ MT6358_TOP_GEN(HK),
+ MT6358_TOP_GEN(AUD),
+ MT6358_TOP_GEN(MISC),
+};
+
+static void pmic_irq_enable(struct irq_data *data)
+{
+ unsigned int hwirq = irqd_to_hwirq(data);
+ struct mt6397_chip *chip = irq_data_get_irq_chip_data(data);
+ struct pmic_irq_data *irqd = chip->irq_data;
+
+ irqd->enable_hwirq[hwirq] = true;
+}
+
+static void pmic_irq_disable(struct irq_data *data)
+{
+ unsigned int hwirq = irqd_to_hwirq(data);
+ struct mt6397_chip *chip = irq_data_get_irq_chip_data(data);
+ struct pmic_irq_data *irqd = chip->irq_data;
+
+ irqd->enable_hwirq[hwirq] = false;
+}
+
+static void pmic_irq_lock(struct irq_data *data)
+{
+ struct mt6397_chip *chip = irq_data_get_irq_chip_data(data);
+
+ mutex_lock(&chip->irqlock);
+}
+
+static void pmic_irq_sync_unlock(struct irq_data *data)
+{
+ unsigned int i, top_gp, gp_offset, en_reg, int_regs, shift;
+ struct mt6397_chip *chip = irq_data_get_irq_chip_data(data);
+ struct pmic_irq_data *irqd = chip->irq_data;
+
+ for (i = 0; i < irqd->num_pmic_irqs; i++) {
+ if (irqd->enable_hwirq[i] == irqd->cache_hwirq[i])
+ continue;
+
+ /* Find out the IRQ group */
+ top_gp = 0;
+ while ((top_gp + 1) < irqd->num_top &&
+ i >= mt6358_ints[top_gp + 1].hwirq_base)
+ top_gp++;
+
+ /* Find the IRQ registers */
+ gp_offset = i - mt6358_ints[top_gp].hwirq_base;
+ int_regs = gp_offset / MT6358_REG_WIDTH;
+ shift = gp_offset % MT6358_REG_WIDTH;
+ en_reg = mt6358_ints[top_gp].en_reg +
+ (mt6358_ints[top_gp].en_reg_shift * int_regs);
+
+ regmap_update_bits(chip->regmap, en_reg, BIT(shift),
+ irqd->enable_hwirq[i] << shift);
+
+ irqd->cache_hwirq[i] = irqd->enable_hwirq[i];
+ }
+ mutex_unlock(&chip->irqlock);
+}
+
+static struct irq_chip mt6358_irq_chip = {
+ .name = "mt6358-irq",
+ .flags = IRQCHIP_SKIP_SET_WAKE,
+ .irq_enable = pmic_irq_enable,
+ .irq_disable = pmic_irq_disable,
+ .irq_bus_lock = pmic_irq_lock,
+ .irq_bus_sync_unlock = pmic_irq_sync_unlock,
+};
+
+static void mt6358_irq_sp_handler(struct mt6397_chip *chip,
+ unsigned int top_gp)
+{
+ unsigned int irq_status, sta_reg, status;
+ unsigned int hwirq, virq;
+ int i, j, ret;
+
+ for (i = 0; i < mt6358_ints[top_gp].num_int_regs; i++) {
+ sta_reg = mt6358_ints[top_gp].sta_reg +
+ mt6358_ints[top_gp].sta_reg_shift * i;
+
+ ret = regmap_read(chip->regmap, sta_reg, &irq_status);
+ if (ret) {
+ dev_err(chip->dev,
+ "Failed to read IRQ status, ret=%d\n", ret);
+ return;
+ }
+
+ if (!irq_status)
+ continue;
+
+ status = irq_status;
+ do {
+ j = __ffs(status);
+
+ hwirq = mt6358_ints[top_gp].hwirq_base +
+ MT6358_REG_WIDTH * i + j;
+
+ virq = irq_find_mapping(chip->irq_domain, hwirq);
+ if (virq)
+ handle_nested_irq(virq);
+
+ status &= ~BIT(j);
+ } while (status);
+
+ regmap_write(chip->regmap, sta_reg, irq_status);
+ }
+}
+
+static irqreturn_t mt6358_irq_handler(int irq, void *data)
+{
+ struct mt6397_chip *chip = data;
+ struct pmic_irq_data *mt6358_irq_data = chip->irq_data;
+ unsigned int bit, i, top_irq_status = 0;
+ int ret;
+
+ ret = regmap_read(chip->regmap,
+ mt6358_irq_data->top_int_status_reg,
+ &top_irq_status);
+ if (ret) {
+ dev_err(chip->dev,
+ "Failed to read status from the device, ret=%d\n", ret);
+ return IRQ_NONE;
+ }
+
+ for (i = 0; i < mt6358_irq_data->num_top; i++) {
+ bit = BIT(mt6358_ints[i].top_offset);
+ if (top_irq_status & bit) {
+ mt6358_irq_sp_handler(chip, i);
+ top_irq_status &= ~bit;
+ if (!top_irq_status)
+ break;
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int pmic_irq_domain_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hw)
+{
+ struct mt6397_chip *mt6397 = d->host_data;
+
+ irq_set_chip_data(irq, mt6397);
+ irq_set_chip_and_handler(irq, &mt6358_irq_chip, handle_level_irq);
+ irq_set_nested_thread(irq, 1);
+ irq_set_noprobe(irq);
+
+ return 0;
+}
+
+static const struct irq_domain_ops mt6358_irq_domain_ops = {
+ .map = pmic_irq_domain_map,
+ .xlate = irq_domain_xlate_twocell,
+};
+
+int mt6358_irq_init(struct mt6397_chip *chip)
+{
+ int i, j, ret;
+ struct pmic_irq_data *irqd;
+
+ irqd = devm_kzalloc(chip->dev, sizeof(*irqd), GFP_KERNEL);
+ if (!irqd)
+ return -ENOMEM;
+
+ chip->irq_data = irqd;
+
+ mutex_init(&chip->irqlock);
+ irqd->top_int_status_reg = MT6358_TOP_INT_STATUS0;
+ irqd->num_pmic_irqs = MT6358_IRQ_NR;
+ irqd->num_top = ARRAY_SIZE(mt6358_ints);
+
+ irqd->enable_hwirq = devm_kcalloc(chip->dev,
+ irqd->num_pmic_irqs,
+ sizeof(*irqd->enable_hwirq),
+ GFP_KERNEL);
+ if (!irqd->enable_hwirq)
+ return -ENOMEM;
+
+ irqd->cache_hwirq = devm_kcalloc(chip->dev,
+ irqd->num_pmic_irqs,
+ sizeof(*irqd->cache_hwirq),
+ GFP_KERNEL);
+ if (!irqd->cache_hwirq)
+ return -ENOMEM;
+
+ /* Disable all interrupts for initializing */
+ for (i = 0; i < irqd->num_top; i++) {
+ for (j = 0; j < mt6358_ints[i].num_int_regs; j++)
+ regmap_write(chip->regmap,
+ mt6358_ints[i].en_reg +
+ mt6358_ints[i].en_reg_shift * j, 0);
+ }
+
+ chip->irq_domain = irq_domain_add_linear(chip->dev->of_node,
+ irqd->num_pmic_irqs,
+ &mt6358_irq_domain_ops, chip);
+ if (!chip->irq_domain) {
+ dev_err(chip->dev, "Could not create IRQ domain\n");
+ return -ENODEV;
+ }
+
+ ret = devm_request_threaded_irq(chip->dev, chip->irq, NULL,
+ mt6358_irq_handler, IRQF_ONESHOT,
+ mt6358_irq_chip.name, chip);
+ if (ret) {
+ dev_err(chip->dev, "Failed to register IRQ=%d, ret=%d\n",
+ chip->irq, ret);
+ return ret;
+ }
+
+ enable_irq_wake(chip->irq);
+ return ret;
+}
diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
index a313a72..f6cd8a6 100644
--- a/drivers/mfd/mt6397-core.c
+++ b/drivers/mfd/mt6397-core.c
@@ -12,13 +12,18 @@
#include <linux/regmap.h>
#include <linux/mfd/core.h>
#include <linux/mfd/mt6323/core.h>
+#include <linux/mfd/mt6358/core.h>
#include <linux/mfd/mt6397/core.h>
#include <linux/mfd/mt6323/registers.h>
+#include <linux/mfd/mt6358/registers.h>
#include <linux/mfd/mt6397/registers.h>

#define MT6323_RTC_BASE 0x8000
#define MT6323_RTC_SIZE 0x40

+#define MT6358_RTC_BASE 0x0588
+#define MT6358_RTC_SIZE 0x3c
+
#define MT6397_RTC_BASE 0xe000
#define MT6397_RTC_SIZE 0x3e

@@ -30,6 +35,11 @@ static const struct resource mt6323_rtc_resources[] = {
DEFINE_RES_IRQ(MT6323_IRQ_STATUS_RTC),
};

+static const struct resource mt6358_rtc_resources[] = {
+ DEFINE_RES_MEM(MT6358_RTC_BASE, MT6358_RTC_SIZE),
+ DEFINE_RES_IRQ(MT6358_IRQ_RTC),
+};
+
static const struct resource mt6397_rtc_resources[] = {
DEFINE_RES_MEM(MT6397_RTC_BASE, MT6397_RTC_SIZE),
DEFINE_RES_IRQ(MT6397_IRQ_RTC),
@@ -74,6 +84,21 @@ static const struct mfd_cell mt6323_devs[] = {
},
};

+static const struct mfd_cell mt6358_devs[] = {
+ {
+ .name = "mt6358-regulator",
+ .of_compatible = "mediatek,mt6358-regulator"
+ }, {
+ .name = "mt6358-rtc",
+ .num_resources = ARRAY_SIZE(mt6358_rtc_resources),
+ .resources = mt6358_rtc_resources,
+ .of_compatible = "mediatek,mt6358-rtc",
+ }, {
+ .name = "mt6358-sound",
+ .of_compatible = "mediatek,mt6358-sound"
+ },
+};
+
static const struct mfd_cell mt6397_devs[] = {
{
.name = "mt6397-rtc",
@@ -116,6 +141,14 @@ static const struct chip_data mt6323_core = {
.irq_init = mt6397_irq_init,
};

+static const struct chip_data mt6358_core = {
+ .cid_addr = MT6358_SWCID,
+ .cid_shift = 8,
+ .cells = mt6358_devs,
+ .cell_size = ARRAY_SIZE(mt6358_devs),
+ .irq_init = mt6358_irq_init,
+};
+
static const struct chip_data mt6397_core = {
.cid_addr = MT6397_CID,
.cid_shift = 0,
@@ -183,6 +216,9 @@ static const struct of_device_id mt6397_of_match[] = {
.compatible = "mediatek,mt6323",
.data = &mt6323_core,
}, {
+ .compatible = "mediatek,mt6358",
+ .data = &mt6358_core,
+ }, {
.compatible = "mediatek,mt6397",
.data = &mt6397_core,
}, {
diff --git a/include/linux/mfd/mt6358/core.h b/include/linux/mfd/mt6358/core.h
new file mode 100644
index 0000000..a304aae
--- /dev/null
+++ b/include/linux/mfd/mt6358/core.h
@@ -0,0 +1,158 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ */
+
+#ifndef __MFD_MT6358_CORE_H__
+#define __MFD_MT6358_CORE_H__
+
+#define MT6358_REG_WIDTH 16
+
+struct irq_top_t {
+ int hwirq_base;
+ unsigned int num_int_regs;
+ unsigned int num_int_bits;
+ unsigned int en_reg;
+ unsigned int en_reg_shift;
+ unsigned int sta_reg;
+ unsigned int sta_reg_shift;
+ unsigned int top_offset;
+};
+
+struct pmic_irq_data {
+ unsigned int num_top;
+ unsigned int num_pmic_irqs;
+ unsigned short top_int_status_reg;
+ bool *enable_hwirq;
+ bool *cache_hwirq;
+};
+
+enum mt6358_irq_top_status_shift {
+ MT6358_BUCK_TOP = 0,
+ MT6358_LDO_TOP,
+ MT6358_PSC_TOP,
+ MT6358_SCK_TOP,
+ MT6358_BM_TOP,
+ MT6358_HK_TOP,
+ MT6358_AUD_TOP,
+ MT6358_MISC_TOP,
+};
+
+enum mt6358_irq_numbers {
+ MT6358_IRQ_VPROC11_OC = 0,
+ MT6358_IRQ_VPROC12_OC,
+ MT6358_IRQ_VCORE_OC,
+ MT6358_IRQ_VGPU_OC,
+ MT6358_IRQ_VMODEM_OC,
+ MT6358_IRQ_VDRAM1_OC,
+ MT6358_IRQ_VS1_OC,
+ MT6358_IRQ_VS2_OC,
+ MT6358_IRQ_VPA_OC,
+ MT6358_IRQ_VCORE_PREOC,
+ MT6358_IRQ_VFE28_OC = 16,
+ MT6358_IRQ_VXO22_OC,
+ MT6358_IRQ_VRF18_OC,
+ MT6358_IRQ_VRF12_OC,
+ MT6358_IRQ_VEFUSE_OC,
+ MT6358_IRQ_VCN33_OC,
+ MT6358_IRQ_VCN28_OC,
+ MT6358_IRQ_VCN18_OC,
+ MT6358_IRQ_VCAMA1_OC,
+ MT6358_IRQ_VCAMA2_OC,
+ MT6358_IRQ_VCAMD_OC,
+ MT6358_IRQ_VCAMIO_OC,
+ MT6358_IRQ_VLDO28_OC,
+ MT6358_IRQ_VA12_OC,
+ MT6358_IRQ_VAUX18_OC,
+ MT6358_IRQ_VAUD28_OC,
+ MT6358_IRQ_VIO28_OC,
+ MT6358_IRQ_VIO18_OC,
+ MT6358_IRQ_VSRAM_PROC11_OC,
+ MT6358_IRQ_VSRAM_PROC12_OC,
+ MT6358_IRQ_VSRAM_OTHERS_OC,
+ MT6358_IRQ_VSRAM_GPU_OC,
+ MT6358_IRQ_VDRAM2_OC,
+ MT6358_IRQ_VMC_OC,
+ MT6358_IRQ_VMCH_OC,
+ MT6358_IRQ_VEMC_OC,
+ MT6358_IRQ_VSIM1_OC,
+ MT6358_IRQ_VSIM2_OC,
+ MT6358_IRQ_VIBR_OC,
+ MT6358_IRQ_VUSB_OC,
+ MT6358_IRQ_VBIF28_OC,
+ MT6358_IRQ_PWRKEY = 48,
+ MT6358_IRQ_HOMEKEY,
+ MT6358_IRQ_PWRKEY_R,
+ MT6358_IRQ_HOMEKEY_R,
+ MT6358_IRQ_NI_LBAT_INT,
+ MT6358_IRQ_CHRDET,
+ MT6358_IRQ_CHRDET_EDGE,
+ MT6358_IRQ_VCDT_HV_DET,
+ MT6358_IRQ_RTC = 64,
+ MT6358_IRQ_FG_BAT0_H = 80,
+ MT6358_IRQ_FG_BAT0_L,
+ MT6358_IRQ_FG_CUR_H,
+ MT6358_IRQ_FG_CUR_L,
+ MT6358_IRQ_FG_ZCV,
+ MT6358_IRQ_FG_BAT1_H,
+ MT6358_IRQ_FG_BAT1_L,
+ MT6358_IRQ_FG_N_CHARGE_L,
+ MT6358_IRQ_FG_IAVG_H,
+ MT6358_IRQ_FG_IAVG_L,
+ MT6358_IRQ_FG_TIME_H,
+ MT6358_IRQ_FG_DISCHARGE,
+ MT6358_IRQ_FG_CHARGE,
+ MT6358_IRQ_BATON_LV = 96,
+ MT6358_IRQ_BATON_HT,
+ MT6358_IRQ_BATON_BAT_IN,
+ MT6358_IRQ_BATON_BAT_OUT,
+ MT6358_IRQ_BIF,
+ MT6358_IRQ_BAT_H = 112,
+ MT6358_IRQ_BAT_L,
+ MT6358_IRQ_BAT2_H,
+ MT6358_IRQ_BAT2_L,
+ MT6358_IRQ_BAT_TEMP_H,
+ MT6358_IRQ_BAT_TEMP_L,
+ MT6358_IRQ_AUXADC_IMP,
+ MT6358_IRQ_NAG_C_DLTV,
+ MT6358_IRQ_AUDIO = 128,
+ MT6358_IRQ_ACCDET = 133,
+ MT6358_IRQ_ACCDET_EINT0,
+ MT6358_IRQ_ACCDET_EINT1,
+ MT6358_IRQ_SPI_CMD_ALERT = 144,
+ MT6358_IRQ_NR,
+};
+
+#define MT6358_IRQ_BUCK_BASE MT6358_IRQ_VPROC11_OC
+#define MT6358_IRQ_LDO_BASE MT6358_IRQ_VFE28_OC
+#define MT6358_IRQ_PSC_BASE MT6358_IRQ_PWRKEY
+#define MT6358_IRQ_SCK_BASE MT6358_IRQ_RTC
+#define MT6358_IRQ_BM_BASE MT6358_IRQ_FG_BAT0_H
+#define MT6358_IRQ_HK_BASE MT6358_IRQ_BAT_H
+#define MT6358_IRQ_AUD_BASE MT6358_IRQ_AUDIO
+#define MT6358_IRQ_MISC_BASE MT6358_IRQ_SPI_CMD_ALERT
+
+#define MT6358_IRQ_BUCK_BITS (MT6358_IRQ_VCORE_PREOC - MT6358_IRQ_BUCK_BASE + 1)
+#define MT6358_IRQ_LDO_BITS (MT6358_IRQ_VBIF28_OC - MT6358_IRQ_LDO_BASE + 1)
+#define MT6358_IRQ_PSC_BITS (MT6358_IRQ_VCDT_HV_DET - MT6358_IRQ_PSC_BASE + 1)
+#define MT6358_IRQ_SCK_BITS (MT6358_IRQ_RTC - MT6358_IRQ_SCK_BASE + 1)
+#define MT6358_IRQ_BM_BITS (MT6358_IRQ_BIF - MT6358_IRQ_BM_BASE + 1)
+#define MT6358_IRQ_HK_BITS (MT6358_IRQ_NAG_C_DLTV - MT6358_IRQ_HK_BASE + 1)
+#define MT6358_IRQ_AUD_BITS (MT6358_IRQ_ACCDET_EINT1 - MT6358_IRQ_AUD_BASE + 1)
+#define MT6358_IRQ_MISC_BITS \
+ (MT6358_IRQ_SPI_CMD_ALERT - MT6358_IRQ_MISC_BASE + 1)
+
+#define MT6358_TOP_GEN(sp) \
+{ \
+ .hwirq_base = MT6358_IRQ_##sp##_BASE, \
+ .num_int_regs = \
+ ((MT6358_IRQ_##sp##_BITS - 1) / MT6358_REG_WIDTH) + 1, \
+ .num_int_bits = MT6358_IRQ_##sp##_BITS, \
+ .en_reg = MT6358_##sp##_TOP_INT_CON0, \
+ .en_reg_shift = 0x6, \
+ .sta_reg = MT6358_##sp##_TOP_INT_STATUS0, \
+ .sta_reg_shift = 0x2, \
+ .top_offset = MT6358_##sp##_TOP, \
+}
+
+#endif /* __MFD_MT6358_CORE_H__ */
diff --git a/include/linux/mfd/mt6358/registers.h b/include/linux/mfd/mt6358/registers.h
new file mode 100644
index 0000000..ff5645b
--- /dev/null
+++ b/include/linux/mfd/mt6358/registers.h
@@ -0,0 +1,282 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ */
+
+#ifndef __MFD_MT6358_REGISTERS_H__
+#define __MFD_MT6358_REGISTERS_H__
+
+/* PMIC Registers */
+#define MT6358_SWCID 0xa
+#define MT6358_MISC_TOP_INT_CON0 0x188
+#define MT6358_MISC_TOP_INT_STATUS0 0x194
+#define MT6358_TOP_INT_STATUS0 0x19e
+#define MT6358_SCK_TOP_INT_CON0 0x52e
+#define MT6358_SCK_TOP_INT_STATUS0 0x53a
+#define MT6358_EOSC_CALI_CON0 0x540
+#define MT6358_EOSC_CALI_CON1 0x542
+#define MT6358_RTC_MIX_CON0 0x544
+#define MT6358_RTC_MIX_CON1 0x546
+#define MT6358_RTC_MIX_CON2 0x548
+#define MT6358_RTC_DSN_ID 0x580
+#define MT6358_RTC_DSN_REV0 0x582
+#define MT6358_RTC_DBI 0x584
+#define MT6358_RTC_DXI 0x586
+#define MT6358_RTC_BBPU 0x588
+#define MT6358_RTC_IRQ_STA 0x58a
+#define MT6358_RTC_IRQ_EN 0x58c
+#define MT6358_RTC_CII_EN 0x58e
+#define MT6358_RTC_AL_MASK 0x590
+#define MT6358_RTC_TC_SEC 0x592
+#define MT6358_RTC_TC_MIN 0x594
+#define MT6358_RTC_TC_HOU 0x596
+#define MT6358_RTC_TC_DOM 0x598
+#define MT6358_RTC_TC_DOW 0x59a
+#define MT6358_RTC_TC_MTH 0x59c
+#define MT6358_RTC_TC_YEA 0x59e
+#define MT6358_RTC_AL_SEC 0x5a0
+#define MT6358_RTC_AL_MIN 0x5a2
+#define MT6358_RTC_AL_HOU 0x5a4
+#define MT6358_RTC_AL_DOM 0x5a6
+#define MT6358_RTC_AL_DOW 0x5a8
+#define MT6358_RTC_AL_MTH 0x5aa
+#define MT6358_RTC_AL_YEA 0x5ac
+#define MT6358_RTC_OSC32CON 0x5ae
+#define MT6358_RTC_POWERKEY1 0x5b0
+#define MT6358_RTC_POWERKEY2 0x5b2
+#define MT6358_RTC_PDN1 0x5b4
+#define MT6358_RTC_PDN2 0x5b6
+#define MT6358_RTC_SPAR0 0x5b8
+#define MT6358_RTC_SPAR1 0x5ba
+#define MT6358_RTC_PROT 0x5bc
+#define MT6358_RTC_DIFF 0x5be
+#define MT6358_RTC_CALI 0x5c0
+#define MT6358_RTC_WRTGR 0x5c2
+#define MT6358_RTC_CON 0x5c4
+#define MT6358_RTC_SEC_CTRL 0x5c6
+#define MT6358_RTC_INT_CNT 0x5c8
+#define MT6358_RTC_SEC_DAT0 0x5ca
+#define MT6358_RTC_SEC_DAT1 0x5cc
+#define MT6358_RTC_SEC_DAT2 0x5ce
+#define MT6358_RTC_SEC_DSN_ID 0x600
+#define MT6358_RTC_SEC_DSN_REV0 0x602
+#define MT6358_RTC_SEC_DBI 0x604
+#define MT6358_RTC_SEC_DXI 0x606
+#define MT6358_RTC_TC_SEC_SEC 0x608
+#define MT6358_RTC_TC_MIN_SEC 0x60a
+#define MT6358_RTC_TC_HOU_SEC 0x60c
+#define MT6358_RTC_TC_DOM_SEC 0x60e
+#define MT6358_RTC_TC_DOW_SEC 0x610
+#define MT6358_RTC_TC_MTH_SEC 0x612
+#define MT6358_RTC_TC_YEA_SEC 0x614
+#define MT6358_RTC_SEC_CK_PDN 0x616
+#define MT6358_RTC_SEC_WRTGR 0x618
+#define MT6358_PSC_TOP_INT_CON0 0x910
+#define MT6358_PSC_TOP_INT_STATUS0 0x91c
+#define MT6358_BM_TOP_INT_CON0 0xc32
+#define MT6358_BM_TOP_INT_CON1 0xc38
+#define MT6358_BM_TOP_INT_STATUS0 0xc4a
+#define MT6358_BM_TOP_INT_STATUS1 0xc4c
+#define MT6358_HK_TOP_INT_CON0 0xf92
+#define MT6358_HK_TOP_INT_STATUS0 0xf9e
+#define MT6358_BUCK_TOP_INT_CON0 0x1318
+#define MT6358_BUCK_TOP_INT_STATUS0 0x1324
+#define MT6358_BUCK_VPROC11_CON0 0x1388
+#define MT6358_BUCK_VPROC11_DBG0 0x139e
+#define MT6358_BUCK_VPROC11_DBG1 0x13a0
+#define MT6358_BUCK_VPROC11_ELR0 0x13a6
+#define MT6358_BUCK_VPROC12_CON0 0x1408
+#define MT6358_BUCK_VPROC12_DBG0 0x141e
+#define MT6358_BUCK_VPROC12_DBG1 0x1420
+#define MT6358_BUCK_VPROC12_ELR0 0x1426
+#define MT6358_BUCK_VCORE_CON0 0x1488
+#define MT6358_BUCK_VCORE_DBG0 0x149e
+#define MT6358_BUCK_VCORE_DBG1 0x14a0
+#define MT6358_BUCK_VCORE_ELR0 0x14aa
+#define MT6358_BUCK_VGPU_CON0 0x1508
+#define MT6358_BUCK_VGPU_DBG0 0x151e
+#define MT6358_BUCK_VGPU_DBG1 0x1520
+#define MT6358_BUCK_VGPU_ELR0 0x1526
+#define MT6358_BUCK_VMODEM_CON0 0x1588
+#define MT6358_BUCK_VMODEM_DBG0 0x159e
+#define MT6358_BUCK_VMODEM_DBG1 0x15a0
+#define MT6358_BUCK_VMODEM_ELR0 0x15a6
+#define MT6358_BUCK_VDRAM1_CON0 0x1608
+#define MT6358_BUCK_VDRAM1_DBG0 0x161e
+#define MT6358_BUCK_VDRAM1_DBG1 0x1620
+#define MT6358_BUCK_VDRAM1_ELR0 0x1626
+#define MT6358_BUCK_VS1_CON0 0x1688
+#define MT6358_BUCK_VS1_DBG0 0x169e
+#define MT6358_BUCK_VS1_DBG1 0x16a0
+#define MT6358_BUCK_VS1_ELR0 0x16ae
+#define MT6358_BUCK_VS2_CON0 0x1708
+#define MT6358_BUCK_VS2_DBG0 0x171e
+#define MT6358_BUCK_VS2_DBG1 0x1720
+#define MT6358_BUCK_VS2_ELR0 0x172e
+#define MT6358_BUCK_VPA_CON0 0x1788
+#define MT6358_BUCK_VPA_CON1 0x178a
+#define MT6358_BUCK_VPA_ELR0 MT6358_BUCK_VPA_CON1
+#define MT6358_BUCK_VPA_DBG0 0x1792
+#define MT6358_BUCK_VPA_DBG1 0x1794
+#define MT6358_VPROC_ANA_CON0 0x180c
+#define MT6358_VCORE_VGPU_ANA_CON0 0x1828
+#define MT6358_VMODEM_ANA_CON0 0x1888
+#define MT6358_VDRAM1_ANA_CON0 0x1896
+#define MT6358_VS1_ANA_CON0 0x18a2
+#define MT6358_VS2_ANA_CON0 0x18ae
+#define MT6358_VPA_ANA_CON0 0x18ba
+#define MT6358_LDO_TOP_INT_CON0 0x1a50
+#define MT6358_LDO_TOP_INT_CON1 0x1a56
+#define MT6358_LDO_TOP_INT_STATUS0 0x1a68
+#define MT6358_LDO_TOP_INT_STATUS1 0x1a6a
+#define MT6358_LDO_VXO22_CON0 0x1a88
+#define MT6358_LDO_VXO22_CON1 0x1a96
+#define MT6358_LDO_VA12_CON0 0x1a9c
+#define MT6358_LDO_VA12_CON1 0x1aaa
+#define MT6358_LDO_VAUX18_CON0 0x1ab0
+#define MT6358_LDO_VAUX18_CON1 0x1abe
+#define MT6358_LDO_VAUD28_CON0 0x1ac4
+#define MT6358_LDO_VAUD28_CON1 0x1ad2
+#define MT6358_LDO_VIO28_CON0 0x1ad8
+#define MT6358_LDO_VIO28_CON1 0x1ae6
+#define MT6358_LDO_VIO18_CON0 0x1aec
+#define MT6358_LDO_VIO18_CON1 0x1afa
+#define MT6358_LDO_VDRAM2_CON0 0x1b08
+#define MT6358_LDO_VDRAM2_CON1 0x1b16
+#define MT6358_LDO_VEMC_CON0 0x1b1c
+#define MT6358_LDO_VEMC_CON1 0x1b2a
+#define MT6358_LDO_VUSB_CON0_0 0x1b30
+#define MT6358_LDO_VUSB_CON1 0x1b40
+#define MT6358_LDO_VSRAM_PROC11_CON0 0x1b46
+#define MT6358_LDO_VSRAM_PROC11_DBG0 0x1b60
+#define MT6358_LDO_VSRAM_PROC11_DBG1 0x1b62
+#define MT6358_LDO_VSRAM_PROC11_TRACKING_CON0 0x1b64
+#define MT6358_LDO_VSRAM_PROC11_TRACKING_CON1 0x1b66
+#define MT6358_LDO_VSRAM_PROC11_TRACKING_CON2 0x1b68
+#define MT6358_LDO_VSRAM_PROC11_TRACKING_CON3 0x1b6a
+#define MT6358_LDO_VSRAM_PROC12_TRACKING_CON0 0x1b6c
+#define MT6358_LDO_VSRAM_PROC12_TRACKING_CON1 0x1b6e
+#define MT6358_LDO_VSRAM_PROC12_TRACKING_CON2 0x1b70
+#define MT6358_LDO_VSRAM_PROC12_TRACKING_CON3 0x1b72
+#define MT6358_LDO_VSRAM_WAKEUP_CON0 0x1b74
+#define MT6358_LDO_GON1_ELR_NUM 0x1b76
+#define MT6358_LDO_VDRAM2_ELR0 0x1b78
+#define MT6358_LDO_VSRAM_PROC12_CON0 0x1b88
+#define MT6358_LDO_VSRAM_PROC12_DBG0 0x1ba2
+#define MT6358_LDO_VSRAM_PROC12_DBG1 0x1ba4
+#define MT6358_LDO_VSRAM_OTHERS_CON0 0x1ba6
+#define MT6358_LDO_VSRAM_OTHERS_DBG0 0x1bc0
+#define MT6358_LDO_VSRAM_OTHERS_DBG1 0x1bc2
+#define MT6358_LDO_VSRAM_GPU_CON0 0x1bc8
+#define MT6358_LDO_VSRAM_GPU_DBG0 0x1be2
+#define MT6358_LDO_VSRAM_GPU_DBG1 0x1be4
+#define MT6358_LDO_VSRAM_CON0 0x1bee
+#define MT6358_LDO_VSRAM_CON1 0x1bf0
+#define MT6358_LDO_VSRAM_CON2 0x1bf2
+#define MT6358_LDO_VSRAM_CON3 0x1bf4
+#define MT6358_LDO_VFE28_CON0 0x1c08
+#define MT6358_LDO_VFE28_CON1 0x1c16
+#define MT6358_LDO_VFE28_CON2 0x1c18
+#define MT6358_LDO_VFE28_CON3 0x1c1a
+#define MT6358_LDO_VRF18_CON0 0x1c1c
+#define MT6358_LDO_VRF18_CON1 0x1c2a
+#define MT6358_LDO_VRF18_CON2 0x1c2c
+#define MT6358_LDO_VRF18_CON3 0x1c2e
+#define MT6358_LDO_VRF12_CON0 0x1c30
+#define MT6358_LDO_VRF12_CON1 0x1c3e
+#define MT6358_LDO_VRF12_CON2 0x1c40
+#define MT6358_LDO_VRF12_CON3 0x1c42
+#define MT6358_LDO_VEFUSE_CON0 0x1c44
+#define MT6358_LDO_VEFUSE_CON1 0x1c52
+#define MT6358_LDO_VEFUSE_CON2 0x1c54
+#define MT6358_LDO_VEFUSE_CON3 0x1c56
+#define MT6358_LDO_VCN18_CON0 0x1c58
+#define MT6358_LDO_VCN18_CON1 0x1c66
+#define MT6358_LDO_VCN18_CON2 0x1c68
+#define MT6358_LDO_VCN18_CON3 0x1c6a
+#define MT6358_LDO_VCAMA1_CON0 0x1c6c
+#define MT6358_LDO_VCAMA1_CON1 0x1c7a
+#define MT6358_LDO_VCAMA1_CON2 0x1c7c
+#define MT6358_LDO_VCAMA1_CON3 0x1c7e
+#define MT6358_LDO_VCAMA2_CON0 0x1c88
+#define MT6358_LDO_VCAMA2_CON1 0x1c96
+#define MT6358_LDO_VCAMA2_CON2 0x1c98
+#define MT6358_LDO_VCAMA2_CON3 0x1c9a
+#define MT6358_LDO_VCAMD_CON0 0x1c9c
+#define MT6358_LDO_VCAMD_CON1 0x1caa
+#define MT6358_LDO_VCAMD_CON2 0x1cac
+#define MT6358_LDO_VCAMD_CON3 0x1cae
+#define MT6358_LDO_VCAMIO_CON0 0x1cb0
+#define MT6358_LDO_VCAMIO_CON1 0x1cbe
+#define MT6358_LDO_VCAMIO_CON2 0x1cc0
+#define MT6358_LDO_VCAMIO_CON3 0x1cc2
+#define MT6358_LDO_VMC_CON0 0x1cc4
+#define MT6358_LDO_VMC_CON1 0x1cd2
+#define MT6358_LDO_VMC_CON2 0x1cd4
+#define MT6358_LDO_VMC_CON3 0x1cd6
+#define MT6358_LDO_VMCH_CON0 0x1cd8
+#define MT6358_LDO_VMCH_CON1 0x1ce6
+#define MT6358_LDO_VMCH_CON2 0x1ce8
+#define MT6358_LDO_VMCH_CON3 0x1cea
+#define MT6358_LDO_VIBR_CON0 0x1d08
+#define MT6358_LDO_VIBR_CON1 0x1d16
+#define MT6358_LDO_VIBR_CON2 0x1d18
+#define MT6358_LDO_VIBR_CON3 0x1d1a
+#define MT6358_LDO_VCN33_CON0_0 0x1d1c
+#define MT6358_LDO_VCN33_CON0_1 0x1d2a
+#define MT6358_LDO_VCN33_CON1 0x1d2c
+#define MT6358_LDO_VCN33_BT_CON1 MT6358_LDO_VCN33_CON1
+#define MT6358_LDO_VCN33_WIFI_CON1 MT6358_LDO_VCN33_CON1
+#define MT6358_LDO_VCN33_CON2 0x1d2e
+#define MT6358_LDO_VCN33_CON3 0x1d30
+#define MT6358_LDO_VLDO28_CON0_0 0x1d32
+#define MT6358_LDO_VLDO28_CON0_1 0x1d40
+#define MT6358_LDO_VLDO28_CON1 0x1d42
+#define MT6358_LDO_VLDO28_CON2 0x1d44
+#define MT6358_LDO_VLDO28_CON3 0x1d46
+#define MT6358_LDO_VSIM1_CON0 0x1d48
+#define MT6358_LDO_VSIM1_CON1 0x1d56
+#define MT6358_LDO_VSIM1_CON2 0x1d58
+#define MT6358_LDO_VSIM1_CON3 0x1d5a
+#define MT6358_LDO_VSIM2_CON0 0x1d5c
+#define MT6358_LDO_VSIM2_CON1 0x1d6a
+#define MT6358_LDO_VSIM2_CON2 0x1d6c
+#define MT6358_LDO_VSIM2_CON3 0x1d6e
+#define MT6358_LDO_VCN28_CON0 0x1d88
+#define MT6358_LDO_VCN28_CON1 0x1d96
+#define MT6358_LDO_VCN28_CON2 0x1d98
+#define MT6358_LDO_VCN28_CON3 0x1d9a
+#define MT6358_VRTC28_CON0 0x1d9c
+#define MT6358_LDO_VBIF28_CON0 0x1d9e
+#define MT6358_LDO_VBIF28_CON1 0x1dac
+#define MT6358_LDO_VBIF28_CON2 0x1dae
+#define MT6358_LDO_VBIF28_CON3 0x1db0
+#define MT6358_VCAMA1_ANA_CON0 0x1e08
+#define MT6358_VCAMA2_ANA_CON0 0x1e0c
+#define MT6358_VCN33_ANA_CON0 0x1e28
+#define MT6358_VSIM1_ANA_CON0 0x1e2c
+#define MT6358_VSIM2_ANA_CON0 0x1e30
+#define MT6358_VUSB_ANA_CON0 0x1e34
+#define MT6358_VEMC_ANA_CON0 0x1e38
+#define MT6358_VLDO28_ANA_CON0 0x1e3c
+#define MT6358_VIO28_ANA_CON0 0x1e40
+#define MT6358_VIBR_ANA_CON0 0x1e44
+#define MT6358_VMCH_ANA_CON0 0x1e48
+#define MT6358_VMC_ANA_CON0 0x1e4c
+#define MT6358_VRF18_ANA_CON0 0x1e88
+#define MT6358_VCN18_ANA_CON0 0x1e8c
+#define MT6358_VCAMIO_ANA_CON0 0x1e90
+#define MT6358_VIO18_ANA_CON0 0x1e94
+#define MT6358_VEFUSE_ANA_CON0 0x1e98
+#define MT6358_VRF12_ANA_CON0 0x1e9c
+#define MT6358_VSRAM_PROC11_ANA_CON0 0x1ea0
+#define MT6358_VSRAM_PROC12_ANA_CON0 0x1ea4
+#define MT6358_VSRAM_OTHERS_ANA_CON0 0x1ea6
+#define MT6358_VSRAM_GPU_ANA_CON0 0x1ea8
+#define MT6358_VDRAM2_ANA_CON0 0x1eaa
+#define MT6358_VCAMD_ANA_CON0 0x1eae
+#define MT6358_VA12_ANA_CON0 0x1eb2
+#define MT6358_AUD_TOP_INT_CON0 0x2228
+#define MT6358_AUD_TOP_INT_STATUS0 0x2234
+
+#endif /* __MFD_MT6358_REGISTERS_H__ */
diff --git a/include/linux/mfd/mt6397/core.h b/include/linux/mfd/mt6397/core.h
index b81d333..9492685 100644
--- a/include/linux/mfd/mt6397/core.h
+++ b/include/linux/mfd/mt6397/core.h
@@ -12,6 +12,7 @@

enum chip_id {
MT6323_CHIP_ID = 0x23,
+ MT6358_CHIP_ID = 0x58,
MT6391_CHIP_ID = 0x91,
MT6397_CHIP_ID = 0x97,
};
@@ -65,8 +66,10 @@ struct mt6397_chip {
u16 int_con[2];
u16 int_status[2];
u16 chip_id;
+ void *irq_data;
};

+int mt6358_irq_init(struct mt6397_chip *chip);
int mt6397_irq_init(struct mt6397_chip *chip);

#endif /* __MFD_MT6397_CORE_H__ */
--
2.6.4

2020-04-16 08:59:12

by Lee Jones

[permalink] [raw]
Subject: Re: [PATCH v12 2/6] mfd: mt6397: Trim probe function to support different chips more cleanly

On Wed, 08 Apr 2020, Hsin-Hsiung Wang wrote:

> Add new struct members for mfd-cells and irq initial function, so we can
> call devm_mfd_add_devices() only once.
>
> Signed-off-by: Hsin-Hsiung Wang <[email protected]>
> ---
> drivers/mfd/mt6397-core.c | 35 ++++++++++++++---------------------
> 1 file changed, 14 insertions(+), 21 deletions(-)

For my own reference (apply this as-is to your sign-off block):

Acked-for-MFD-by: Lee Jones <[email protected]>

--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

2020-04-16 09:02:51

by Lee Jones

[permalink] [raw]
Subject: Re: [PATCH v12 1/6] mfd: mt6397: Modify suspend/resume behavior

On Wed, 08 Apr 2020, Hsin-Hsiung Wang wrote:

> Some pmics don't need backup interrupt settings, so we change to use
> pm notifier for the pmics which are necessary to store settings.
>
> Signed-off-by: Hsin-Hsiung Wang <[email protected]>
> ---
> drivers/mfd/mt6397-core.c | 30 ------------------------------
> drivers/mfd/mt6397-irq.c | 35 ++++++++++++++++++++++++++++++++++-
> include/linux/mfd/mt6397/core.h | 2 ++
> 3 files changed, 36 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
> index 0437c85..d2e70d8 100644
> --- a/drivers/mfd/mt6397-core.c
> +++ b/drivers/mfd/mt6397-core.c
> @@ -100,35 +100,6 @@ static const struct mfd_cell mt6397_devs[] = {
> }
> };
>
> -#ifdef CONFIG_PM_SLEEP
> -static int mt6397_irq_suspend(struct device *dev)
> -{
> - struct mt6397_chip *chip = dev_get_drvdata(dev);
> -
> - regmap_write(chip->regmap, chip->int_con[0], chip->wake_mask[0]);
> - regmap_write(chip->regmap, chip->int_con[1], chip->wake_mask[1]);
> -
> - enable_irq_wake(chip->irq);
> -
> - return 0;
> -}
> -
> -static int mt6397_irq_resume(struct device *dev)
> -{
> - struct mt6397_chip *chip = dev_get_drvdata(dev);
> -
> - regmap_write(chip->regmap, chip->int_con[0], chip->irq_masks_cur[0]);
> - regmap_write(chip->regmap, chip->int_con[1], chip->irq_masks_cur[1]);
> -
> - disable_irq_wake(chip->irq);
> -
> - return 0;
> -}
> -#endif
> -
> -static SIMPLE_DEV_PM_OPS(mt6397_pm_ops, mt6397_irq_suspend,
> - mt6397_irq_resume);
> -
> struct chip_data {
> u32 cid_addr;
> u32 cid_shift;
> @@ -238,7 +209,6 @@ static struct platform_driver mt6397_driver = {
> .driver = {
> .name = "mt6397",
> .of_match_table = of_match_ptr(mt6397_of_match),
> - .pm = &mt6397_pm_ops,
> },
> .id_table = mt6397_id,
> };
> diff --git a/drivers/mfd/mt6397-irq.c b/drivers/mfd/mt6397-irq.c
> index b2d3ce1..2924919 100644
> --- a/drivers/mfd/mt6397-irq.c
> +++ b/drivers/mfd/mt6397-irq.c
> @@ -9,6 +9,7 @@
> #include <linux/of_irq.h>
> #include <linux/platform_device.h>
> #include <linux/regmap.h>
> +#include <linux/suspend.h>
> #include <linux/mfd/mt6323/core.h>
> #include <linux/mfd/mt6323/registers.h>
> #include <linux/mfd/mt6397/core.h>
> @@ -81,7 +82,7 @@ static struct irq_chip mt6397_irq_chip = {
> static void mt6397_irq_handle_reg(struct mt6397_chip *mt6397, int reg,
> int irqbase)
> {
> - unsigned int status;
> + unsigned int status = 0;

This looks like an unrelated change, no?

> int i, irq, ret;
>
> ret = regmap_read(mt6397->regmap, reg, &status);
> @@ -128,6 +129,36 @@ static const struct irq_domain_ops mt6397_irq_domain_ops = {
> .map = mt6397_irq_domain_map,
> };

Other than that.

For my own reference:
Acked-for-MFD-by: Lee Jones <[email protected]>

--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

2020-04-16 09:14:04

by Lee Jones

[permalink] [raw]
Subject: Re: [PATCH v12 4/6] mfd: Add support for the MediaTek MT6358 PMIC

On Wed, 08 Apr 2020, Hsin-Hsiung Wang wrote:

> This adds support for the MediaTek MT6358 PMIC. This is a
> multifunction device with the following sub modules:
>
> - Regulator
> - RTC
> - Codec
> - Interrupt
>
> It is interfaced to the host controller using SPI interface
> by a proprietary hardware called PMIC wrapper or pwrap.
> MT6358 MFD is a child device of the pwrap.
>
> Signed-off-by: Hsin-Hsiung Wang <[email protected]>
> ---
> drivers/mfd/Makefile | 2 +-
> drivers/mfd/mt6358-irq.c | 235 +++++++++++++++++++++++++++++
> drivers/mfd/mt6397-core.c | 36 +++++
> include/linux/mfd/mt6358/core.h | 158 ++++++++++++++++++++
> include/linux/mfd/mt6358/registers.h | 282 +++++++++++++++++++++++++++++++++++
> include/linux/mfd/mt6397/core.h | 3 +
> 6 files changed, 715 insertions(+), 1 deletion(-)
> create mode 100644 drivers/mfd/mt6358-irq.c
> create mode 100644 include/linux/mfd/mt6358/core.h
> create mode 100644 include/linux/mfd/mt6358/registers.h

[...]

> diff --git a/include/linux/mfd/mt6358/core.h b/include/linux/mfd/mt6358/core.h
> new file mode 100644
> index 0000000..a304aae
> --- /dev/null
> +++ b/include/linux/mfd/mt6358/core.h
> @@ -0,0 +1,158 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2019 MediaTek Inc.

Nit: This needs updating.

Once updated, please apply my:

For my own reference (apply this as-is to your sign-off block):

Acked-for-MFD-by: Lee Jones <[email protected]>

--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

2020-04-16 09:19:27

by Lee Jones

[permalink] [raw]
Subject: Re: [PATCH v12 5/6] rtc: mt6397: Add support for the MediaTek MT6358 RTC

On Wed, 08 Apr 2020, Hsin-Hsiung Wang wrote:

> From: Ran Bi <[email protected]>
>
> This add support for the MediaTek MT6358 RTC. Driver using
> compatible data to store different RTC_WRTGR address offset.
> This replace RTC_WRTGR to RTC_WRTGR_MT6323 in mt6323-poweroff
> driver which only needed by armv7 CPU without ATF.
>
> Reviewed-by: Nicolas Boichat <[email protected]>
> Reviewed-by: Yingjoe Chen <[email protected]>
> Acked-by: Alexandre Belloni <[email protected]>
> Acked-by: Sebastian Reichel <[email protected]>
> Signed-off-by: Ran Bi <[email protected]>
> Signed-off-by: Hsin-Hsiung Wang <[email protected]>

Please place these in chronological order. They should provide some
history, rather than a unordered slab list of random sign-offs.

> ---
> drivers/power/reset/mt6323-poweroff.c | 2 +-
> drivers/rtc/rtc-mt6397.c | 18 +++++++++++++++---
> include/linux/mfd/mt6397/rtc.h | 9 ++++++++-
> 3 files changed, 24 insertions(+), 5 deletions(-)

[...]

> diff --git a/include/linux/mfd/mt6397/rtc.h b/include/linux/mfd/mt6397/rtc.h
> index 7dfb63b..6200f3b 100644
> --- a/include/linux/mfd/mt6397/rtc.h
> +++ b/include/linux/mfd/mt6397/rtc.h
> @@ -18,7 +18,9 @@
> #define RTC_BBPU_CBUSY BIT(6)
> #define RTC_BBPU_KEY (0x43 << 8)
>
> -#define RTC_WRTGR 0x003c
> +#define RTC_WRTGR_MT6358 0x3a
> +#define RTC_WRTGR_MT6397 0x3c

Why remove the leading 00's?

These are now different to the other regs defined in this header.

> +#define RTC_WRTGR_MT6323 RTC_WRTGR_MT6397
>
> #define RTC_IRQ_STA 0x0002

Like here for instance --^

> #define RTC_IRQ_STA_AL BIT(0)
> @@ -65,6 +67,10 @@
> #define MTK_RTC_POLL_DELAY_US 10
> #define MTK_RTC_POLL_TIMEOUT (jiffies_to_usecs(HZ))
>
> +struct mtk_rtc_data {
> + u32 wrtgr;
> +};
> +
> struct mt6397_rtc {
> struct device *dev;
> struct rtc_device *rtc_dev;
> @@ -74,6 +80,7 @@ struct mt6397_rtc {
> struct regmap *regmap;
> int irq;
> u32 addr_base;
> + const struct mtk_rtc_data *data;
> };
>
> #endif /* _LINUX_MFD_MT6397_RTC_H_ */

--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

2020-04-17 08:37:23

by Ran Bi

[permalink] [raw]
Subject: Re: [PATCH v12 5/6] rtc: mt6397: Add support for the MediaTek MT6358 RTC

On Thu, 2020-04-16 at 10:14 +0100, Lee Jones wrote:
> On Wed, 08 Apr 2020, Hsin-Hsiung Wang wrote:
>
> > From: Ran Bi <[email protected]>
> >
> > This add support for the MediaTek MT6358 RTC. Driver using
> > compatible data to store different RTC_WRTGR address offset.
> > This replace RTC_WRTGR to RTC_WRTGR_MT6323 in mt6323-poweroff
> > driver which only needed by armv7 CPU without ATF.
> >
> > Reviewed-by: Nicolas Boichat <[email protected]>
> > Reviewed-by: Yingjoe Chen <[email protected]>
> > Acked-by: Alexandre Belloni <[email protected]>
> > Acked-by: Sebastian Reichel <[email protected]>
> > Signed-off-by: Ran Bi <[email protected]>
> > Signed-off-by: Hsin-Hsiung Wang <[email protected]>
>
> Please place these in chronological order. They should provide some
> history, rather than a unordered slab list of random sign-offs.
>

I suppose that you mean the order should be like below, right?
Reviewed-by: Yingjoe Chen <[email protected]>
Acked-by: Sebastian Reichel <[email protected]>
Acked-by: Alexandre Belloni <[email protected]>
Reviewed-by: Nicolas Boichat <[email protected]>
Signed-off-by: Hsin-Hsiung Wang <[email protected]>
Signed-off-by: Ran Bi <[email protected]>

> > ---
> > drivers/power/reset/mt6323-poweroff.c | 2 +-
> > drivers/rtc/rtc-mt6397.c | 18 +++++++++++++++---
> > include/linux/mfd/mt6397/rtc.h | 9 ++++++++-
> > 3 files changed, 24 insertions(+), 5 deletions(-)
>
> [...]
>
> > diff --git a/include/linux/mfd/mt6397/rtc.h b/include/linux/mfd/mt6397/rtc.h
> > index 7dfb63b..6200f3b 100644
> > --- a/include/linux/mfd/mt6397/rtc.h
> > +++ b/include/linux/mfd/mt6397/rtc.h
> > @@ -18,7 +18,9 @@
> > #define RTC_BBPU_CBUSY BIT(6)
> > #define RTC_BBPU_KEY (0x43 << 8)
> >
> > -#define RTC_WRTGR 0x003c
> > +#define RTC_WRTGR_MT6358 0x3a
> > +#define RTC_WRTGR_MT6397 0x3c
>
> Why remove the leading 00's?
>
> These are now different to the other regs defined in this header.
>

I will fix this at next patch.

> > +#define RTC_WRTGR_MT6323 RTC_WRTGR_MT6397
> >
> > #define RTC_IRQ_STA 0x0002
>
> Like here for instance --^
>
> > #define RTC_IRQ_STA_AL BIT(0)
> > @@ -65,6 +67,10 @@
> > #define MTK_RTC_POLL_DELAY_US 10
> > #define MTK_RTC_POLL_TIMEOUT (jiffies_to_usecs(HZ))
> >
> > +struct mtk_rtc_data {
> > + u32 wrtgr;
> > +};
> > +
> > struct mt6397_rtc {
> > struct device *dev;
> > struct rtc_device *rtc_dev;
> > @@ -74,6 +80,7 @@ struct mt6397_rtc {
> > struct regmap *regmap;
> > int irq;
> > u32 addr_base;
> > + const struct mtk_rtc_data *data;
> > };
> >
> > #endif /* _LINUX_MFD_MT6397_RTC_H_ */
>

2020-04-17 08:51:55

by Ran Bi

[permalink] [raw]
Subject: Re: [PATCH v12 5/6] rtc: mt6397: Add support for the MediaTek MT6358 RTC

On Fri, 2020-04-17 at 16:29 +0800, Ran Bi wrote:
> On Thu, 2020-04-16 at 10:14 +0100, Lee Jones wrote:
> > On Wed, 08 Apr 2020, Hsin-Hsiung Wang wrote:
> >
> > > From: Ran Bi <[email protected]>
> > >
> > > This add support for the MediaTek MT6358 RTC. Driver using
> > > compatible data to store different RTC_WRTGR address offset.
> > > This replace RTC_WRTGR to RTC_WRTGR_MT6323 in mt6323-poweroff
> > > driver which only needed by armv7 CPU without ATF.
> > >
> > > Reviewed-by: Nicolas Boichat <[email protected]>
> > > Reviewed-by: Yingjoe Chen <[email protected]>
> > > Acked-by: Alexandre Belloni <[email protected]>
> > > Acked-by: Sebastian Reichel <[email protected]>
> > > Signed-off-by: Ran Bi <[email protected]>
> > > Signed-off-by: Hsin-Hsiung Wang <[email protected]>
> >
> > Please place these in chronological order. They should provide some
> > history, rather than a unordered slab list of random sign-offs.
> >
>
> I suppose that you mean the order should be like below, right?
> Reviewed-by: Yingjoe Chen <[email protected]>
> Acked-by: Sebastian Reichel <[email protected]>
> Acked-by: Alexandre Belloni <[email protected]>
> Reviewed-by: Nicolas Boichat <[email protected]>
> Signed-off-by: Hsin-Hsiung Wang <[email protected]>
> Signed-off-by: Ran Bi <[email protected]>
>

Correction, I think following is the correct chronological order:
Signed-off-by: Ran Bi <[email protected]>
Signed-off-by: Hsin-Hsiung Wang <[email protected]>
Reviewed-by: Nicolas Boichat <[email protected]>
Acked-by: Alexandre Belloni <[email protected]>
Acked-by: Sebastian Reichel <[email protected]>
Reviewed-by: Yingjoe Chen <[email protected]>

> > > ---
> > > drivers/power/reset/mt6323-poweroff.c | 2 +-
> > > drivers/rtc/rtc-mt6397.c | 18 +++++++++++++++---
> > > include/linux/mfd/mt6397/rtc.h | 9 ++++++++-
> > > 3 files changed, 24 insertions(+), 5 deletions(-)
> >
> > [...]
> >
> > > diff --git a/include/linux/mfd/mt6397/rtc.h b/include/linux/mfd/mt6397/rtc.h
> > > index 7dfb63b..6200f3b 100644
> > > --- a/include/linux/mfd/mt6397/rtc.h
> > > +++ b/include/linux/mfd/mt6397/rtc.h
> > > @@ -18,7 +18,9 @@
> > > #define RTC_BBPU_CBUSY BIT(6)
> > > #define RTC_BBPU_KEY (0x43 << 8)
> > >
> > > -#define RTC_WRTGR 0x003c
> > > +#define RTC_WRTGR_MT6358 0x3a
> > > +#define RTC_WRTGR_MT6397 0x3c
> >
> > Why remove the leading 00's?
> >
> > These are now different to the other regs defined in this header.
> >
>
> I will fix this at next patch.
>
> > > +#define RTC_WRTGR_MT6323 RTC_WRTGR_MT6397
> > >
> > > #define RTC_IRQ_STA 0x0002
> >
> > Like here for instance --^
> >
> > > #define RTC_IRQ_STA_AL BIT(0)
> > > @@ -65,6 +67,10 @@
> > > #define MTK_RTC_POLL_DELAY_US 10
> > > #define MTK_RTC_POLL_TIMEOUT (jiffies_to_usecs(HZ))
> > >
> > > +struct mtk_rtc_data {
> > > + u32 wrtgr;
> > > +};
> > > +
> > > struct mt6397_rtc {
> > > struct device *dev;
> > > struct rtc_device *rtc_dev;
> > > @@ -74,6 +80,7 @@ struct mt6397_rtc {
> > > struct regmap *regmap;
> > > int irq;
> > > u32 addr_base;
> > > + const struct mtk_rtc_data *data;
> > > };
> > >
> > > #endif /* _LINUX_MFD_MT6397_RTC_H_ */
> >
>

2020-04-20 07:37:59

by Lee Jones

[permalink] [raw]
Subject: Re: [PATCH v12 5/6] rtc: mt6397: Add support for the MediaTek MT6358 RTC

On Fri, 17 Apr 2020, Ran Bi wrote:

> On Thu, 2020-04-16 at 10:14 +0100, Lee Jones wrote:
> > On Wed, 08 Apr 2020, Hsin-Hsiung Wang wrote:
> >
> > > From: Ran Bi <[email protected]>
> > >
> > > This add support for the MediaTek MT6358 RTC. Driver using
> > > compatible data to store different RTC_WRTGR address offset.
> > > This replace RTC_WRTGR to RTC_WRTGR_MT6323 in mt6323-poweroff
> > > driver which only needed by armv7 CPU without ATF.
> > >
> > > Reviewed-by: Nicolas Boichat <[email protected]>
> > > Reviewed-by: Yingjoe Chen <[email protected]>
> > > Acked-by: Alexandre Belloni <[email protected]>
> > > Acked-by: Sebastian Reichel <[email protected]>
> > > Signed-off-by: Ran Bi <[email protected]>
> > > Signed-off-by: Hsin-Hsiung Wang <[email protected]>
> >
> > Please place these in chronological order. They should provide some
> > history, rather than a unordered slab list of random sign-offs.
> >
>
> I suppose that you mean the order should be like below, right?
> Reviewed-by: Yingjoe Chen <[email protected]>
> Acked-by: Sebastian Reichel <[email protected]>
> Acked-by: Alexandre Belloni <[email protected]>
> Reviewed-by: Nicolas Boichat <[email protected]>
> Signed-off-by: Hsin-Hsiung Wang <[email protected]>
> Signed-off-by: Ran Bi <[email protected]>

This would imply that it was reviewed before it was written, which
would subsequently imply time-travel, so I suggest not.

Author(s)
Review(s)/Acks(s)/Tested(s) /* ideally in the order they were received */
Sub-maintainer sign-off /* if applicable */
Maintainer sign-off

> > > ---
> > > drivers/power/reset/mt6323-poweroff.c | 2 +-
> > > drivers/rtc/rtc-mt6397.c | 18 +++++++++++++++---
> > > include/linux/mfd/mt6397/rtc.h | 9 ++++++++-
> > > 3 files changed, 24 insertions(+), 5 deletions(-)

--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

2020-04-20 07:38:48

by Lee Jones

[permalink] [raw]
Subject: Re: [PATCH v12 5/6] rtc: mt6397: Add support for the MediaTek MT6358 RTC

On Fri, 17 Apr 2020, Ran Bi wrote:

> On Fri, 2020-04-17 at 16:29 +0800, Ran Bi wrote:
> > On Thu, 2020-04-16 at 10:14 +0100, Lee Jones wrote:
> > > On Wed, 08 Apr 2020, Hsin-Hsiung Wang wrote:
> > >
> > > > From: Ran Bi <[email protected]>
> > > >
> > > > This add support for the MediaTek MT6358 RTC. Driver using
> > > > compatible data to store different RTC_WRTGR address offset.
> > > > This replace RTC_WRTGR to RTC_WRTGR_MT6323 in mt6323-poweroff
> > > > driver which only needed by armv7 CPU without ATF.
> > > >
> > > > Reviewed-by: Nicolas Boichat <[email protected]>
> > > > Reviewed-by: Yingjoe Chen <[email protected]>
> > > > Acked-by: Alexandre Belloni <[email protected]>
> > > > Acked-by: Sebastian Reichel <[email protected]>
> > > > Signed-off-by: Ran Bi <[email protected]>
> > > > Signed-off-by: Hsin-Hsiung Wang <[email protected]>
> > >
> > > Please place these in chronological order. They should provide some
> > > history, rather than a unordered slab list of random sign-offs.
> > >
> >
> > I suppose that you mean the order should be like below, right?
> > Reviewed-by: Yingjoe Chen <[email protected]>
> > Acked-by: Sebastian Reichel <[email protected]>
> > Acked-by: Alexandre Belloni <[email protected]>
> > Reviewed-by: Nicolas Boichat <[email protected]>
> > Signed-off-by: Hsin-Hsiung Wang <[email protected]>
> > Signed-off-by: Ran Bi <[email protected]>
> >
>
> Correction, I think following is the correct chronological order:
> Signed-off-by: Ran Bi <[email protected]>
> Signed-off-by: Hsin-Hsiung Wang <[email protected]>
> Reviewed-by: Nicolas Boichat <[email protected]>
> Acked-by: Alexandre Belloni <[email protected]>
> Acked-by: Sebastian Reichel <[email protected]>
> Reviewed-by: Yingjoe Chen <[email protected]>

This looks better, yes.

--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

2020-04-20 10:54:31

by Hsin-Hsiung Wang

[permalink] [raw]
Subject: Re: [PATCH v12 1/6] mfd: mt6397: Modify suspend/resume behavior

Hi,

On Thu, 2020-04-16 at 09:49 +0100, Lee Jones wrote:
> On Wed, 08 Apr 2020, Hsin-Hsiung Wang wrote:
>
> > Some pmics don't need backup interrupt settings, so we change to use
> > pm notifier for the pmics which are necessary to store settings.
> >
> > Signed-off-by: Hsin-Hsiung Wang <[email protected]>
> > ---
> > drivers/mfd/mt6397-core.c | 30 ------------------------------
> > drivers/mfd/mt6397-irq.c | 35 ++++++++++++++++++++++++++++++++++-
> > include/linux/mfd/mt6397/core.h | 2 ++
> > 3 files changed, 36 insertions(+), 31 deletions(-)
> >
> > diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
> > index 0437c85..d2e70d8 100644
> > --- a/drivers/mfd/mt6397-core.c
> > +++ b/drivers/mfd/mt6397-core.c
> > @@ -100,35 +100,6 @@ static const struct mfd_cell mt6397_devs[] = {
> > }
> > };
> >
> > -#ifdef CONFIG_PM_SLEEP
> > -static int mt6397_irq_suspend(struct device *dev)
> > -{
> > - struct mt6397_chip *chip = dev_get_drvdata(dev);
> > -
> > - regmap_write(chip->regmap, chip->int_con[0], chip->wake_mask[0]);
> > - regmap_write(chip->regmap, chip->int_con[1], chip->wake_mask[1]);
> > -
> > - enable_irq_wake(chip->irq);
> > -
> > - return 0;
> > -}
> > -
> > -static int mt6397_irq_resume(struct device *dev)
> > -{
> > - struct mt6397_chip *chip = dev_get_drvdata(dev);
> > -
> > - regmap_write(chip->regmap, chip->int_con[0], chip->irq_masks_cur[0]);
> > - regmap_write(chip->regmap, chip->int_con[1], chip->irq_masks_cur[1]);
> > -
> > - disable_irq_wake(chip->irq);
> > -
> > - return 0;
> > -}
> > -#endif
> > -
> > -static SIMPLE_DEV_PM_OPS(mt6397_pm_ops, mt6397_irq_suspend,
> > - mt6397_irq_resume);
> > -
> > struct chip_data {
> > u32 cid_addr;
> > u32 cid_shift;
> > @@ -238,7 +209,6 @@ static struct platform_driver mt6397_driver = {
> > .driver = {
> > .name = "mt6397",
> > .of_match_table = of_match_ptr(mt6397_of_match),
> > - .pm = &mt6397_pm_ops,
> > },
> > .id_table = mt6397_id,
> > };
> > diff --git a/drivers/mfd/mt6397-irq.c b/drivers/mfd/mt6397-irq.c
> > index b2d3ce1..2924919 100644
> > --- a/drivers/mfd/mt6397-irq.c
> > +++ b/drivers/mfd/mt6397-irq.c
> > @@ -9,6 +9,7 @@
> > #include <linux/of_irq.h>
> > #include <linux/platform_device.h>
> > #include <linux/regmap.h>
> > +#include <linux/suspend.h>
> > #include <linux/mfd/mt6323/core.h>
> > #include <linux/mfd/mt6323/registers.h>
> > #include <linux/mfd/mt6397/core.h>
> > @@ -81,7 +82,7 @@ static struct irq_chip mt6397_irq_chip = {
> > static void mt6397_irq_handle_reg(struct mt6397_chip *mt6397, int reg,
> > int irqbase)
> > {
> > - unsigned int status;
> > + unsigned int status = 0;
>
> This looks like an unrelated change, no?
>

It is to fix the coverity defect.

> > int i, irq, ret;
> >
> > ret = regmap_read(mt6397->regmap, reg, &status);
> > @@ -128,6 +129,36 @@ static const struct irq_domain_ops mt6397_irq_domain_ops = {
> > .map = mt6397_irq_domain_map,
> > };
>
> Other than that.
>
> For my own reference:
> Acked-for-MFD-by: Lee Jones <[email protected]>
>
Thanks for your review. I will add it in the next version.

2020-04-20 11:17:14

by Lee Jones

[permalink] [raw]
Subject: Re: [PATCH v12 1/6] mfd: mt6397: Modify suspend/resume behavior

On Mon, 20 Apr 2020, Hsin-hsiung Wang wrote:

> Hi,
>
> On Thu, 2020-04-16 at 09:49 +0100, Lee Jones wrote:
> > On Wed, 08 Apr 2020, Hsin-Hsiung Wang wrote:
> >
> > > Some pmics don't need backup interrupt settings, so we change to use
> > > pm notifier for the pmics which are necessary to store settings.
> > >
> > > Signed-off-by: Hsin-Hsiung Wang <[email protected]>
> > > ---
> > > drivers/mfd/mt6397-core.c | 30 ------------------------------
> > > drivers/mfd/mt6397-irq.c | 35 ++++++++++++++++++++++++++++++++++-
> > > include/linux/mfd/mt6397/core.h | 2 ++
> > > 3 files changed, 36 insertions(+), 31 deletions(-)
> > >
> > > diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
> > > index 0437c85..d2e70d8 100644
> > > --- a/drivers/mfd/mt6397-core.c
> > > +++ b/drivers/mfd/mt6397-core.c
> > > @@ -100,35 +100,6 @@ static const struct mfd_cell mt6397_devs[] = {
> > > }
> > > };
> > >
> > > -#ifdef CONFIG_PM_SLEEP
> > > -static int mt6397_irq_suspend(struct device *dev)
> > > -{
> > > - struct mt6397_chip *chip = dev_get_drvdata(dev);
> > > -
> > > - regmap_write(chip->regmap, chip->int_con[0], chip->wake_mask[0]);
> > > - regmap_write(chip->regmap, chip->int_con[1], chip->wake_mask[1]);
> > > -
> > > - enable_irq_wake(chip->irq);
> > > -
> > > - return 0;
> > > -}
> > > -
> > > -static int mt6397_irq_resume(struct device *dev)
> > > -{
> > > - struct mt6397_chip *chip = dev_get_drvdata(dev);
> > > -
> > > - regmap_write(chip->regmap, chip->int_con[0], chip->irq_masks_cur[0]);
> > > - regmap_write(chip->regmap, chip->int_con[1], chip->irq_masks_cur[1]);
> > > -
> > > - disable_irq_wake(chip->irq);
> > > -
> > > - return 0;
> > > -}
> > > -#endif
> > > -
> > > -static SIMPLE_DEV_PM_OPS(mt6397_pm_ops, mt6397_irq_suspend,
> > > - mt6397_irq_resume);
> > > -
> > > struct chip_data {
> > > u32 cid_addr;
> > > u32 cid_shift;
> > > @@ -238,7 +209,6 @@ static struct platform_driver mt6397_driver = {
> > > .driver = {
> > > .name = "mt6397",
> > > .of_match_table = of_match_ptr(mt6397_of_match),
> > > - .pm = &mt6397_pm_ops,
> > > },
> > > .id_table = mt6397_id,
> > > };
> > > diff --git a/drivers/mfd/mt6397-irq.c b/drivers/mfd/mt6397-irq.c
> > > index b2d3ce1..2924919 100644
> > > --- a/drivers/mfd/mt6397-irq.c
> > > +++ b/drivers/mfd/mt6397-irq.c
> > > @@ -9,6 +9,7 @@
> > > #include <linux/of_irq.h>
> > > #include <linux/platform_device.h>
> > > #include <linux/regmap.h>
> > > +#include <linux/suspend.h>
> > > #include <linux/mfd/mt6323/core.h>
> > > #include <linux/mfd/mt6323/registers.h>
> > > #include <linux/mfd/mt6397/core.h>
> > > @@ -81,7 +82,7 @@ static struct irq_chip mt6397_irq_chip = {
> > > static void mt6397_irq_handle_reg(struct mt6397_chip *mt6397, int reg,
> > > int irqbase)
> > > {
> > > - unsigned int status;
> > > + unsigned int status = 0;
> >
> > This looks like an unrelated change, no?
> >
>
> It is to fix the coverity defect.

Which isn't mentioned in the commit log and doesn't have anything to
do with this patch. Thus it should be in a separate patch, but I'm
not going to lose any sleep over it.

> > > int i, irq, ret;
> > >
> > > ret = regmap_read(mt6397->regmap, reg, &status);
> > > @@ -128,6 +129,36 @@ static const struct irq_domain_ops mt6397_irq_domain_ops = {
> > > .map = mt6397_irq_domain_map,
> > > };
> >
> > Other than that.
> >
> > For my own reference:
> > Acked-for-MFD-by: Lee Jones <[email protected]>
> >
> Thanks for your review. I will add it in the next version.
>

--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

2020-04-20 11:57:28

by Hsin-Hsiung Wang

[permalink] [raw]
Subject: Re: [PATCH v12 1/6] mfd: mt6397: Modify suspend/resume behavior

Hi,

On Mon, 2020-04-20 at 12:15 +0100, Lee Jones wrote:
> On Mon, 20 Apr 2020, Hsin-hsiung Wang wrote:
>
> > Hi,
> >
> > On Thu, 2020-04-16 at 09:49 +0100, Lee Jones wrote:
> > > On Wed, 08 Apr 2020, Hsin-Hsiung Wang wrote:
> > >
> > > > Some pmics don't need backup interrupt settings, so we change to use
> > > > pm notifier for the pmics which are necessary to store settings.
> > > >
> > > > Signed-off-by: Hsin-Hsiung Wang <[email protected]>
> > > > ---
> > > > drivers/mfd/mt6397-core.c | 30 ------------------------------
> > > > drivers/mfd/mt6397-irq.c | 35 ++++++++++++++++++++++++++++++++++-
> > > > include/linux/mfd/mt6397/core.h | 2 ++
> > > > 3 files changed, 36 insertions(+), 31 deletions(-)
> > > >
> > > > diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
> > > > index 0437c85..d2e70d8 100644
> > > > --- a/drivers/mfd/mt6397-core.c
> > > > +++ b/drivers/mfd/mt6397-core.c
> > > > @@ -100,35 +100,6 @@ static const struct mfd_cell mt6397_devs[] = {
> > > > }
> > > > };
> > > >
> > > > -#ifdef CONFIG_PM_SLEEP
> > > > -static int mt6397_irq_suspend(struct device *dev)
> > > > -{
> > > > - struct mt6397_chip *chip = dev_get_drvdata(dev);
> > > > -
> > > > - regmap_write(chip->regmap, chip->int_con[0], chip->wake_mask[0]);
> > > > - regmap_write(chip->regmap, chip->int_con[1], chip->wake_mask[1]);
> > > > -
> > > > - enable_irq_wake(chip->irq);
> > > > -
> > > > - return 0;
> > > > -}
> > > > -
> > > > -static int mt6397_irq_resume(struct device *dev)
> > > > -{
> > > > - struct mt6397_chip *chip = dev_get_drvdata(dev);
> > > > -
> > > > - regmap_write(chip->regmap, chip->int_con[0], chip->irq_masks_cur[0]);
> > > > - regmap_write(chip->regmap, chip->int_con[1], chip->irq_masks_cur[1]);
> > > > -
> > > > - disable_irq_wake(chip->irq);
> > > > -
> > > > - return 0;
> > > > -}
> > > > -#endif
> > > > -
> > > > -static SIMPLE_DEV_PM_OPS(mt6397_pm_ops, mt6397_irq_suspend,
> > > > - mt6397_irq_resume);
> > > > -
> > > > struct chip_data {
> > > > u32 cid_addr;
> > > > u32 cid_shift;
> > > > @@ -238,7 +209,6 @@ static struct platform_driver mt6397_driver = {
> > > > .driver = {
> > > > .name = "mt6397",
> > > > .of_match_table = of_match_ptr(mt6397_of_match),
> > > > - .pm = &mt6397_pm_ops,
> > > > },
> > > > .id_table = mt6397_id,
> > > > };
> > > > diff --git a/drivers/mfd/mt6397-irq.c b/drivers/mfd/mt6397-irq.c
> > > > index b2d3ce1..2924919 100644
> > > > --- a/drivers/mfd/mt6397-irq.c
> > > > +++ b/drivers/mfd/mt6397-irq.c
> > > > @@ -9,6 +9,7 @@
> > > > #include <linux/of_irq.h>
> > > > #include <linux/platform_device.h>
> > > > #include <linux/regmap.h>
> > > > +#include <linux/suspend.h>
> > > > #include <linux/mfd/mt6323/core.h>
> > > > #include <linux/mfd/mt6323/registers.h>
> > > > #include <linux/mfd/mt6397/core.h>
> > > > @@ -81,7 +82,7 @@ static struct irq_chip mt6397_irq_chip = {
> > > > static void mt6397_irq_handle_reg(struct mt6397_chip *mt6397, int reg,
> > > > int irqbase)
> > > > {
> > > > - unsigned int status;
> > > > + unsigned int status = 0;
> > >
> > > This looks like an unrelated change, no?
> > >
> >
> > It is to fix the coverity defect.
>
> Which isn't mentioned in the commit log and doesn't have anything to
> do with this patch. Thus it should be in a separate patch, but I'm
> not going to lose any sleep over it.
>

Could I just add it to the commit message?
Thanks.

> > > > int i, irq, ret;
> > > >
> > > > ret = regmap_read(mt6397->regmap, reg, &status);
> > > > @@ -128,6 +129,36 @@ static const struct irq_domain_ops mt6397_irq_domain_ops = {
> > > > .map = mt6397_irq_domain_map,
> > > > };
> > >
> > > Other than that.
> > >
> > > For my own reference:
> > > Acked-for-MFD-by: Lee Jones <[email protected]>
> > >
> > Thanks for your review. I will add it in the next version.
> >
>