Hi Fengping,
On 20-04-23 09:20, Fengping yu wrote:
> From: "fengping.yu" <[email protected]>
Missing commit message?
> Signed-off-by: fengping.yu <[email protected]>
> ---
> drivers/input/keyboard/Kconfig | 9 ++
> drivers/input/keyboard/Makefile | 1 +
> drivers/input/keyboard/mtk-kpd.c | 242 +++++++++++++++++++++++++++++++
> 3 files changed, 252 insertions(+)
> create mode 100644 drivers/input/keyboard/mtk-kpd.c
>
> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> index 4706ff09f0e8..4a387d8683b1 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -772,6 +772,15 @@ config KEYBOARD_BCM
> To compile this driver as a module, choose M here: the
> module will be called bcm-keypad.
>
> +config KEYBOARD_MTK_KPD
> + tristate "MediaTek Keypad Support"
I think here are some missing deps.
> + help
> + Say Y here if you want to use the keypad.
I would write:
"Say Y here if you want to use the keypad on MediaTek SoCs"
> + If unuse, say N.
s/unuse/unsure/
> +
> + To compile this driver as a module, choose M here: the
> + module will be called mtk-kpd.
> +
> config KEYBOARD_MTK_PMIC
> tristate "MediaTek PMIC keys support"
> depends on MFD_MT6397
> diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
> index f5b17524adf2..63324d3e36c5 100644
> --- a/drivers/input/keyboard/Makefile
> +++ b/drivers/input/keyboard/Makefile
> @@ -42,6 +42,7 @@ obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o
> obj-$(CONFIG_KEYBOARD_MAX7359) += max7359_keypad.o
> obj-$(CONFIG_KEYBOARD_MCS) += mcs_touchkey.o
> obj-$(CONFIG_KEYBOARD_MPR121) += mpr121_touchkey.o
> +obj-$(CONFIG_KEYBOARD_MTK_KPD) += mtk-kpd.o
> obj-$(CONFIG_KEYBOARD_MTK_PMIC) += mtk-pmic-keys.o
> obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o
> obj-$(CONFIG_KEYBOARD_NOMADIK) += nomadik-ske-keypad.o
> diff --git a/drivers/input/keyboard/mtk-kpd.c b/drivers/input/keyboard/mtk-kpd.c
> new file mode 100644
> index 000000000000..7f8f091b2734
> --- /dev/null
> +++ b/drivers/input/keyboard/mtk-kpd.c
> @@ -0,0 +1,242 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2019 MediaTek Inc.
> + * Author Terry Chang <[email protected]>
> + */
> +#include <linux/clk.h>
> +#include <linux/gpio.h>
> +#include <linux/init.h>
> +#include <linux/input/matrix_keypad.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/pinctrl/consumer.h>
> +#include <linux/platform_device.h>
Pls, check if all includes are needed.
> +
> +#define KPD_NAME "mtk-kpd"
> +
> +#define KP_MEM 0x0004
> +#define KP_DEBOUNCE 0x0018
> +
> +#define KPD_DEBOUNCE_MASK GENMASK(13, 0)
> +#define KPD_DEBOUNCE_MAX 256000
> +#define KPD_NUM_MEMS 5
> +#define KPD_NUM_BITS 136 /* 4 * 32 + 8 MEM5 only use 8 BITS */
> +#define BITS_TO_U32(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(u32))
> +
> +struct mtk_keypad {
> + struct input_dev *input_dev;
> + struct clk *clk;
> + void __iomem *base;
> + unsigned int irqnr;
You don't need the irqnr here.
> + bool wakeup;
> + u32 key_debounce;
> + u32 n_rows;
> + u32 n_cols;
> + DECLARE_BITMAP(keymap_state, KPD_NUM_BITS);
> +};
> +
> +static irqreturn_t kpd_irq_handler(int irq, void *dev_id)
> +{
> + /* use _nosync to avoid deadlock */
What did you mean by this comment?
> + struct mtk_keypad *keypad = dev_id;
> + unsigned short *keycode = keypad->input_dev->keycode;
> + DECLARE_BITMAP(new_state, KPD_NUM_BITS);
> + DECLARE_BITMAP(change, KPD_NUM_BITS);
> + int bit_nr;
> + int pressed;
> + unsigned short code;
> +
> + memcpy_fromio(new_state, keypad->base + KP_MEM, KPD_NUM_MEMS);
As I written below, pls make use of the regmap() framework.
> + bitmap_xor(change, new_state, keypad->keymap_state, KPD_NUM_BITS);
> +
> + for_each_set_bit(bit_nr, change, KPD_NUM_BITS) {
> + pressed = test_bit(bit_nr, new_state) == 0U;
I would write !test_bit() and add a comment /* pressed == 0 */
> + dev_dbg(&keypad->input_dev->dev, "%s",
> + pressed ? "pressed" : "released");
> +
> + /* per 32bit register only use low 16bit as keypad mem register */
Pls, align the comment.
> + code = keycode[bit_nr - 16 * (BITS_TO_U32(bit_nr) - 1)];
> +
> + input_report_key(keypad->input_dev, code, pressed);
> + input_sync(keypad->input_dev);
> +
> + dev_dbg(&keypad->input_dev->dev,
> + "report Linux keycode = %d\n", code);
> + }
> +
> + bitmap_copy(keypad->keymap_state, new_state, KPD_NUM_BITS);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int kpd_get_dts_info(struct mtk_keypad *keypad)
> +{
> + int ret;
> + struct device *dev = keypad->input_dev->dev.parent;
> + struct device_node *node = dev->of_node;
> +
> + ret = matrix_keypad_parse_properties(dev, &keypad->n_rows,
> + &keypad->n_cols);
> +
Unnecessary newline.
> + if (ret) {
> + dev_err(dev, "Failed to parse keypad params\n");
> + return ret;
> + }
> +
> + ret = device_property_read_u32(dev, "mediatek,debounce-us",
> + &keypad->key_debounce);
> + if (ret) {
> + dev_err(dev, "Failed to read mediatek debounce time\n");
> + return ret;
> + }
> +
> + if (keypad->key_debounce > KPD_DEBOUNCE_MAX) {
> + dev_err(dev, "Debounce time exceeds the maximum allowed time 256ms\n");
> + return -EINVAL;
> + }
> +
> + keypad->wakeup = device_property_read_bool(node, "wakeup-source");
Did you test this? It should be:
device_property_read_bool(dev, "wakeup-source");
> +
> + dev_dbg(dev, "n_row=%d n_col=%d debounce=%d\n",
> + keypad->n_rows, keypad->n_cols,
> + keypad->key_debounce);
> +
> + return 0;
> +}
> +
> +static int kpd_pdrv_probe(struct platform_device *pdev)
> +{
> + struct mtk_keypad *keypad;
> + struct pinctrl *keypad_pinctrl;
> + struct pinctrl_state *kpd_default;
> + int ret;
> +
> + keypad = devm_kzalloc(&pdev->dev, sizeof(*keypad), GFP_KERNEL);
> + if (!keypad)
> + return -ENOMEM;
> +
> + bitmap_fill(keypad->keymap_state, KPD_NUM_BITS);
> +
> + keypad->input_dev = devm_input_allocate_device(&pdev->dev);
> + if (!keypad->input_dev) {
> + dev_err(&pdev->dev, "Failed to allocate input dev\n");
> + return -ENOMEM;
> + }
> +
> + keypad->input_dev->name = KPD_NAME;
> + keypad->input_dev->id.bustype = BUS_HOST;
> +
> + ret = kpd_get_dts_info(keypad);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to get dts info\n");
> + return ret;
> + }
> +
> + ret = matrix_keypad_build_keymap(NULL, NULL,
> + keypad->n_rows,
> + keypad->n_cols,
> + NULL,
> + keypad->input_dev);
> +
Unnecessary Newline.
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to build keymap\n");
> + return ret;
> + }
> +
> + input_set_drvdata(keypad->input_dev, keypad);
> +
> + keypad->base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(keypad->base)) {
> + dev_err(&pdev->dev, "Failed to get resource and iomap keypad\n");
> + return PTR_ERR(keypad->base);
> + }
> +
> + if (keypad->key_debounce > KPD_DEBOUNCE_MAX) {
> + dev_err(&pdev->dev, "Invalid debounce time value.\n");
> + return -EINVAL;
> + }
This check is already done withn the kpd_get_dts_info(). I would say to
drop the kpd_get_dts_info() function and probe it all within the probe()
function. It is not that much data you need and it removes the wakupsrc
var fromt the driver state. Furthermore devm_platform_ioremap_resource()
and devm_clk_get() parses the DT too. I would parse the deps before you
setup and fill the input_dev to fail early.
> + writew(keypad->key_debounce * 32 / 1000 & KPD_DEBOUNCE_MASK,
> + keypad->base + KP_DEBOUNCE);
Also I would avoid this completely and instead use the
regmap() interface which has mmio support.
> + keypad->clk = devm_clk_get(&pdev->dev, "kpd");
> + if (IS_ERR(keypad->clk)) {
> + return PTR_ERR(keypad->clk);
> + }
> +
> + ret = clk_prepare_enable(keypad->clk);
> + if (ret) {
> + dev_err(&pdev->dev, "cannot prepare/enable keypad clock\n");
> + return ret;
> + }
Nit you can add a devm_add_action_or_reset() here to avoid the goto:
error handling.
> + keypad_pinctrl = devm_pinctrl_get(&pdev->dev);
> + if (IS_ERR(keypad_pinctrl)) {
> + ret = PTR_ERR(keypad_pinctrl);
> + goto disable_kpd_clk;
> + }
> +
> + kpd_default = pinctrl_lookup_state(keypad_pinctrl, "default");
> + if (IS_ERR(kpd_default)) {
> + dev_err(&pdev->dev, "No default pinctrl state\n");
> + ret = PTR_ERR(kpd_default);
> + goto disable_kpd_clk;
> + }
> +
> + pinctrl_select_state(keypad_pinctrl, kpd_default);
> +
> + keypad->irqnr = platform_get_irq(pdev, 0);
As writting above, the irqnr can be a local var.
> + if (keypad->irqnr < 0) {
> + dev_err(&pdev->dev, "Failed to get irq\n");
> + ret = -keypad->irqnr;
> + goto disable_kpd_clk;
> + }
> +
> + ret = devm_request_irq(&pdev->dev, keypad->irqnr,
> + kpd_irq_handler, 0,
> + KPD_NAME, keypad);
Why do you don't use the threaded irq [devm_request_threaded_irq()]?
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to request IRQ#%d:%d\n",
> + keypad->irqnr, ret);
> + goto disable_kpd_clk;
> + }
> +
> + ret = input_register_device(keypad->input_dev);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to register device\n");
> + goto disable_kpd_clk;
> + }
> +
> + device_init_wakeup(&pdev->dev, keypad->wakeup);
> +
> + platform_set_drvdata(pdev, keypad);
Where do you need the drvdata? It seems useless.
> + return 0;
> +
> +disable_kpd_clk:
> + clk_disable_unprepare(keypad->clk);
> + return ret;
> +}
> +
> +static const struct of_device_id kpd_of_match[] = {
> + {.compatible = "mediatek,kp"},
> + {}
Nit { }
or
{ /*sentinel*/ }
> +};
MODULE_DEVICE_TABLE(of, kpd_of_match);
> +
> +static struct platform_driver kpd_pdrv = {
> + .probe = kpd_pdrv_probe,
> + .driver = {
> + .name = KPD_NAME,
> + .of_match_table = kpd_of_match,
> + },
> +};
> +
Unnecessary newline.
Regards,
Marco
> +module_platform_driver(kpd_pdrv);
> +
> +MODULE_AUTHOR("Mediatek Corporation");
> +MODULE_DESCRIPTION("MTK Keypad (KPD) Driver");
> +MODULE_LICENSE("GPL");