Current dts files with 'gpio-led' nodes were manually verified.
In order to automate this process leds-gpio.txt
has been converted to yaml. With this conversion a check
for pattern properties was added. A test with the command
below gives a screen full of warnings like:
arch/arm/boot/dts/rk3188-radxarock.dt.yaml: gpio-leds:
'blue', 'green', 'sleep'
do not match any of the regexes:
'(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Fix these errors with help of the following rules:
1: Add nodename in the preferred form.
2: Always add a label that ends with '_led' to prevent conflicts
with other labels such as 'power' and 'mmc'
3: If leds need pinctrl add a label that ends with '_led_pin'
also to prevent conflicts with other labels.
patternProperties:
# The first form is preferred, but fall back to just 'led'
# anywhere in the node name to at least catch some child nodes.
"(^led-[0-9a-f]$|led)":
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/leds/
leds-gpio.yaml
Signed-off-by: Johan Jonker <[email protected]>
---
arch/arm/boot/dts/rk3036-kylin.dts | 2 +-
arch/arm/boot/dts/rk3066a-mk808.dts | 2 +-
arch/arm/boot/dts/rk3188-radxarock.dts | 6 +++---
arch/arm/boot/dts/rk3229-xms6.dts | 2 +-
arch/arm/boot/dts/rk3288-firefly-reload.dts | 12 ++++++------
arch/arm/boot/dts/rk3288-firefly.dtsi | 12 ++++++------
arch/arm/boot/dts/rk3288-miqi.dts | 2 +-
arch/arm/boot/dts/rk3288-phycore-som.dtsi | 6 +++---
arch/arm/boot/dts/rk3288-rock2-square.dts | 4 ++--
arch/arm/boot/dts/rk3288-tinker.dtsi | 6 +++---
10 files changed, 27 insertions(+), 27 deletions(-)
diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
index 2ff9f152d..7154b827e 100644
--- a/arch/arm/boot/dts/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -16,7 +16,7 @@
leds: gpio-leds {
compatible = "gpio-leds";
- work {
+ work_led: led-0 {
gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
label = "kylin:red:led";
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts
index 365eff621..eed9e60cf 100644
--- a/arch/arm/boot/dts/rk3066a-mk808.dts
+++ b/arch/arm/boot/dts/rk3066a-mk808.dts
@@ -22,7 +22,7 @@
gpio-leds {
compatible = "gpio-leds";
- blue {
+ blue_led: led-0 {
label = "mk808:blue:power";
gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
default-state = "off";
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index c9a7f5409..b0fef82c0 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -33,19 +33,19 @@
gpio-leds {
compatible = "gpio-leds";
- green {
+ green_led: led-0 {
label = "rock:green:user1";
gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- blue {
+ blue_led: led-1 {
label = "rock:blue:user2";
gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- sleep {
+ sleep_led: led-2 {
label = "rock:red:power";
gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
default-state = "off";
diff --git a/arch/arm/boot/dts/rk3229-xms6.dts b/arch/arm/boot/dts/rk3229-xms6.dts
index 933ef69da..637245324 100644
--- a/arch/arm/boot/dts/rk3229-xms6.dts
+++ b/arch/arm/boot/dts/rk3229-xms6.dts
@@ -33,7 +33,7 @@
power-led {
compatible = "gpio-leds";
- blue {
+ blue_led: led-0 {
gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts
index 8c38bda21..9a4a9749c 100644
--- a/arch/arm/boot/dts/rk3288-firefly-reload.dts
+++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts
@@ -45,20 +45,20 @@
leds {
compatible = "gpio-leds";
- power {
+ power_led: led-0 {
gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>;
label = "firefly:blue:power";
pinctrl-names = "default";
- pinctrl-0 = <&power_led>;
+ pinctrl-0 = <&power_led_pin>;
panic-indicator;
};
- work {
+ work_led: led-1 {
gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>;
label = "firefly:blue:user";
linux,default-trigger = "rc-feedback";
pinctrl-names = "default";
- pinctrl-0 = <&work_led>;
+ pinctrl-0 = <&work_led_pin>;
};
};
@@ -334,11 +334,11 @@
};
leds {
- power_led: power-led {
+ power_led_pin: power-led-pin {
rockchip,pins = <8 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
- work_led: work-led {
+ work_led_pin: work-led-pin {
rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index 5e0a19004..e5c4fd4ea 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -62,20 +62,20 @@
leds {
compatible = "gpio-leds";
- work {
+ work_led: led-0 {
gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>;
label = "firefly:blue:user";
linux,default-trigger = "rc-feedback";
pinctrl-names = "default";
- pinctrl-0 = <&work_led>;
+ pinctrl-0 = <&work_led_pin>;
};
- power {
+ power_led: led-1 {
gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>;
label = "firefly:green:power";
linux,default-trigger = "default-on";
pinctrl-names = "default";
- pinctrl-0 = <&power_led>;
+ pinctrl-0 = <&power_led_pin>;
};
};
@@ -429,11 +429,11 @@
};
leds {
- power_led: power-led {
+ power_led_pin: power-led-pin {
rockchip,pins = <8 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
- work_led: work-led {
+ work_led_pin: work-led-pin {
rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts
index c41d012c8..213c9eb84 100644
--- a/arch/arm/boot/dts/rk3288-miqi.dts
+++ b/arch/arm/boot/dts/rk3288-miqi.dts
@@ -30,7 +30,7 @@
leds {
compatible = "gpio-leds";
- work {
+ work_led: led-0 {
gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
label = "miqi:green:user";
linux,default-trigger = "timer";
diff --git a/arch/arm/boot/dts/rk3288-phycore-som.dtsi b/arch/arm/boot/dts/rk3288-phycore-som.dtsi
index 77a47b9b7..e43887c96 100644
--- a/arch/arm/boot/dts/rk3288-phycore-som.dtsi
+++ b/arch/arm/boot/dts/rk3288-phycore-som.dtsi
@@ -36,9 +36,9 @@
leds: user-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
- pinctrl-0 = <&user_led>;
+ pinctrl-0 = <&user_led_pin>;
- user {
+ user_led: led-0 {
label = "green_led";
gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
@@ -372,7 +372,7 @@
};
leds {
- user_led: user-led {
+ user_led_pin: user-led-pin {
rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_output_high>;
};
};
diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts
index cdcdc921e..3cca4d0f9 100644
--- a/arch/arm/boot/dts/rk3288-rock2-square.dts
+++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
@@ -41,13 +41,13 @@
gpio-leds {
compatible = "gpio-leds";
- heartbeat {
+ heartbeat_led: led-0 {
gpios = <&gpio7 RK_PB7 GPIO_ACTIVE_LOW>;
label = "rock2:green:state1";
linux,default-trigger = "heartbeat";
};
- mmc {
+ mmc_led: led-1 {
gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>;
label = "rock2:blue:state2";
linux,default-trigger = "mmc0";
diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
index acfaa12ec..90e9be443 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
@@ -46,17 +46,17 @@
gpio-leds {
compatible = "gpio-leds";
- act-led {
+ act_led: led-0 {
gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
};
- heartbeat-led {
+ heartbeat_led: led-1 {
gpios = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
- pwr-led {
+ pwr_led: led-2 {
gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
--
2.11.0
On Tue, 28 Apr 2020 16:49:32 +0200, Johan Jonker wrote:
> Current dts files with 'gpio-led' nodes were manually verified.
> In order to automate this process leds-gpio.txt
> has been converted to yaml. With this conversion a check
> for pattern properties was added. A test with the command
> below gives a screen full of warnings like:
>
> arch/arm/boot/dts/rk3188-radxarock.dt.yaml: gpio-leds:
> 'blue', 'green', 'sleep'
> do not match any of the regexes:
> '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
>
> [...]
Applied, thanks!
Best regards,
--
Heiko Stuebner <[email protected]>