2020-04-29 20:19:27

by Martin Blumenstingl

Subject: [PATCH DO NOT MERGE v2 09/11] arm64: dts: amlogic: Add the Ethernet "timing-adjustment" clock

Add the "timing-adjusment" clock now that we now that this is connected
to the PRG_ETHERNET registers. It is used internally to generate the
RGMII RX delay no the MAC side (if needed).

Signed-off-by: Martin Blumenstingl <[email protected]>
---
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 6 ++++--
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 6 ++++--
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 5 +++--
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 5 +++--
4 files changed, 14 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index aace3d32a3df..b021d802807a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -181,8 +181,10 @@ ethmac: ethernet@ff3f0000 {
interrupt-names = "macirq";
clocks = <&clkc CLKID_ETH>,
<&clkc CLKID_FCLK_DIV2>,
- <&clkc CLKID_MPLL2>;
- clock-names = "stmmaceth", "clkin0", "clkin1";
+ <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "stmmaceth", "clkin0", "clkin1",
+ "timing-adjustment";
rx-fifo-depth = <4096>;
tx-fifo-depth = <2048>;
status = "disabled";
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 0882ea215b88..f800bfc68832 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -185,8 +185,10 @@ ethmac: ethernet@ff3f0000 {
interrupt-names = "macirq";
clocks = <&clkc CLKID_ETH>,
<&clkc CLKID_FCLK_DIV2>,
- <&clkc CLKID_MPLL2>;
- clock-names = "stmmaceth", "clkin0", "clkin1";
+ <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "stmmaceth", "clkin0", "clkin1",
+ "timing-adjustment";
rx-fifo-depth = <4096>;
tx-fifo-depth = <2048>;
status = "disabled";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 0cb40326b0d3..f6efa1cdb72b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -310,8 +310,9 @@ &efuse {
&ethmac {
clocks = <&clkc CLKID_ETH>,
<&clkc CLKID_FCLK_DIV2>,
- <&clkc CLKID_MPLL2>;
- clock-names = "stmmaceth", "clkin0", "clkin1";
+ <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
};

&gpio_intc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 259d86399390..9d173e3c8794 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -92,8 +92,9 @@ &efuse {
&ethmac {
clocks = <&clkc CLKID_ETH>,
<&clkc CLKID_FCLK_DIV2>,
- <&clkc CLKID_MPLL2>;
- clock-names = "stmmaceth", "clkin0", "clkin1";
+ <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";

mdio0: mdio {
#address-cells = <1>;
--
2.26.2