From: Manivannan Sadhasivam <[email protected]>
Hello,
This series adds Stinger96 and IoT Box board support. These boards are
based on STM32MP157A SoC, designed and manufactured by Shiratech solutions.
The Stinger96 is a base board (96Boards IoT Extended edition) while IoT Box
adds one mezzanine on top of it and sold as a gateway device.
This series depends on below patchsets already submitted and gone through
reviews:
[PATCH v3 0/3] Add Reset and Wakeup support for CCS811
[PATCH v3 0/2] Add CTS/RTS gpio support to STM32 UART
More information about these boards can be found in below links:
https://www.shiratech-solutions.com/products/stinger96/
https://www.shiratech-solutions.com/products/iot-box/
Thanks,
Mani
Changes in v2:
* Used "stm32" prefix for all DT commits
* Dropped custom sdmmc2 pinctrl node since existing node itself has pullup
enabled and works fine.
Manivannan Sadhasivam (6):
dt-bindings: Add vendor prefix for Shiratech Solutions
ARM: dts: stm32: Add missing pinctrl entries for STM32MP15
dt-bindings: arm: stm32: Document Stinger96 compatible
ARM: dts: stm32: Add Stinger96 board support
dt-bindings: arm: stm32: Document IoT Box compatible
ARM: dts: stm32: Add IoT Box board support
.../devicetree/bindings/arm/stm32/stm32.yaml | 2 +
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 64 ++++
arch/arm/boot/dts/stm32mp157a-iot-box.dts | 68 ++++
arch/arm/boot/dts/stm32mp157a-stinger96.dts | 12 +
arch/arm/boot/dts/stm32mp157a-stinger96.dtsi | 342 ++++++++++++++++++
7 files changed, 492 insertions(+)
create mode 100644 arch/arm/boot/dts/stm32mp157a-iot-box.dts
create mode 100644 arch/arm/boot/dts/stm32mp157a-stinger96.dts
create mode 100644 arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
--
2.17.1
From: Manivannan Sadhasivam <[email protected]>
This commit adds devicetree vendor prefix for Shiratech solutions,
a SOM/embedded board manufacturing company.
https://www.shiratech-solutions.com/
Signed-off-by: Manivannan Sadhasivam <[email protected]>
---
Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index e3f1b06d12ae..48ad8f954f33 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -902,6 +902,8 @@ patternProperties:
description: Sharp Corporation
"^shimafuji,.*":
description: Shimafuji Electric, Inc.
+ "^shiratech,.*":
+ description: Shiratech Solutions
"^si-en,.*":
description: Si-En Technology Ltd.
"^si-linux,.*":
--
2.17.1
From: Manivannan Sadhasivam <[email protected]>
These pinctrl definitions will be used by Stinger96/IoTBox boards
from Shiratech.
Signed-off-by: Manivannan Sadhasivam <[email protected]>
---
arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 64 ++++++++++++++++++++++++
1 file changed, 64 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index aeddcaadb829..858c83038e5a 100644
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -1519,6 +1519,30 @@
};
};
+ usart2_pins_b: usart2-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */
+ <STM32_PINMUX('A', 1, AF7)>; /* USART2_RTS */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('F', 4, AF7)>, /* USART2_RX */
+ <STM32_PINMUX('E', 15, AF7)>; /* USART2_CTS_NSS */
+ bias-disable;
+ };
+ };
+
+ usart2_sleep_pins_b: usart2-sleep-1 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 5, ANALOG)>, /* USART2_TX */
+ <STM32_PINMUX('A', 1, ANALOG)>, /* USART2_RTS */
+ <STM32_PINMUX('F', 4, ANALOG)>, /* USART2_RX */
+ <STM32_PINMUX('E', 15, ANALOG)>; /* USART2_CTS_NSS */
+ };
+ };
+
usart3_pins_a: usart3-0 {
pins1 {
pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
@@ -1558,6 +1582,19 @@
};
};
+ uart4_pins_c: uart4-2 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
+
uart7_pins_a: uart7-0 {
pins1 {
pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */
@@ -1573,6 +1610,19 @@
};
};
+ uart7_pins_b: uart7-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 7, AF7)>; /* UART7_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('F', 6, AF7)>; /* UART7_RX */
+ bias-disable;
+ };
+ };
+
uart8_pins_a: uart8-0 {
pins1 {
pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */
@@ -1647,4 +1697,18 @@
bias-disable;
};
};
+
+ spi4_pins_a: spi4-0 {
+ pins {
+ pinmux = <STM32_PINMUX('E', 12, AF5)>, /* SPI4_SCK */
+ <STM32_PINMUX('E', 6, AF5)>; /* SPI4_MOSI */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('E', 13, AF5)>; /* SPI4_MISO */
+ bias-disable;
+ };
+ };
};
--
2.17.1
From: Manivannan Sadhasivam <[email protected]>
Document devicetree compatible of Shiratech Stinger96 board.
Signed-off-by: Manivannan Sadhasivam <[email protected]>
---
Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
index 71ea3f04ab9c..3849f1d0e03e 100644
--- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
@@ -39,6 +39,7 @@ properties:
- enum:
- arrow,stm32mp157a-avenger96 # Avenger96
- lxa,stm32mp157c-mc1
+ - shiratech,stm32mp157a-stinger96 # Stinger96
- st,stm32mp157c-ed1
- st,stm32mp157a-dk1
- st,stm32mp157c-dk2
--
2.17.1
From: Manivannan Sadhasivam <[email protected]>
Stinger96 is a 96Boards IoT Extended edition board designed and
manufactured by Shiratech solutions based on STM32MP1 SoC. Following
are the features of this board:
* 256MB DDR
* 125MB NAND Flash
* Onboard BG96 modem
* 1x uSD
* 2x USB (1 available as external connector and another connected to BG96)
* 1x SPI
* 1x PCM
* 2x UART (apart from serial console)
* 2x I2C (apart from one connected to PMIC)
Following peripherals are tested and known to work:
* BG96 modem
* 1x I2C (LS-I2C0)
* 1x SPI
* 1x UART (LS-UART0)
* USB (Only Gadget mode)
* uSD
More information about this board can be found in Shiratech website:
https://www.shiratech-solutions.com/products/stinger96/
Signed-off-by: Manivannan Sadhasivam <[email protected]>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/stm32mp157a-stinger96.dts | 12 +
arch/arm/boot/dts/stm32mp157a-stinger96.dtsi | 342 +++++++++++++++++++
3 files changed, 355 insertions(+)
create mode 100644 arch/arm/boot/dts/stm32mp157a-stinger96.dts
create mode 100644 arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f43467b02bcd..966b81dfffd6 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1030,6 +1030,7 @@ dtb-$(CONFIG_ARCH_STM32) += \
stm32h743i-disco.dtb \
stm32mp157a-avenger96.dtb \
stm32mp157a-dk1.dtb \
+ stm32mp157a-stinger96.dtb \
stm32mp157c-dhcom-pdk2.dtb \
stm32mp157c-dk2.dtb \
stm32mp157c-ed1.dtb \
diff --git a/arch/arm/boot/dts/stm32mp157a-stinger96.dts b/arch/arm/boot/dts/stm32mp157a-stinger96.dts
new file mode 100644
index 000000000000..249a53877512
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-stinger96.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Manivannan Sadhasivam
+ */
+
+/dts-v1/;
+#include "stm32mp157a-stinger96.dtsi"
+
+/ {
+ model = "Shiratech STM32MP157A Stinger96 board";
+ compatible = "shiratech,stm32mp157a-stinger96", "st,stm32mp157";
+};
diff --git a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
new file mode 100644
index 000000000000..58275bcf9e26
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
@@ -0,0 +1,342 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Manivannan Sadhasivam
+ */
+
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+ aliases {
+ mmc0 = &sdmmc1;
+ serial0 = &uart4;
+ serial1 = &uart7;
+ serial2 = &usart2;
+ spi0 = &spi4;
+ };
+
+ chosen {
+ stdout-path = "serial1:115200n8";
+ };
+
+ memory@c0000000 {
+ device_type = "memory";
+ reg = <0xc0000000 0x10000000>;
+ };
+
+ led {
+ compatible = "gpio-leds";
+
+ led1 {
+ label = "green:user1";
+ gpios = <&gpioa 13 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ led2 {
+ label = "green:user2";
+ gpios = <&gpioh 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ led3 {
+ label = "green:user3";
+ gpios = <&gpioh 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc1";
+ default-state = "off";
+ };
+
+ led4 {
+ label = "green:user4";
+ gpios = <&gpiof 12 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "none";
+ default-state = "off";
+ panic-indicator;
+ };
+ };
+
+ sd_switch: regulator-sd_switch {
+ compatible = "regulator-gpio";
+ regulator-name = "sd_switch";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-type = "voltage";
+ regulator-always-on;
+
+ gpios = <&gpioa 8 GPIO_ACTIVE_HIGH>;
+ gpios-states = <0>;
+ states = <1800000 0x1>,
+ <2900000 0x0>;
+ };
+};
+
+/* Only headless mode is supported */
+&gpu {
+ status = "disabled";
+};
+
+/* LS-I2C0 */
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ i2c-scl-rising-time-ns = <1000>;
+ i2c-scl-falling-time-ns = <300>;
+ status = "okay";
+ /delete-property/dmas;
+ /delete-property/dma-names;
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins_a>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+ /delete-property/dmas;
+ /delete-property/dma-names;
+
+ pmic: stpmic@33 {
+ compatible = "st,stpmic1";
+ reg = <0x33>;
+ interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "okay";
+
+ regulators {
+ compatible = "st,stpmic1-regulators";
+
+ ldo1-supply = <&v3v3>;
+ ldo2-supply = <&v3v3>;
+ ldo3-supply = <&vdd_ddr>;
+ ldo5-supply = <&v3v3>;
+ ldo6-supply = <&v3v3>;
+ pwr_sw1-supply = <&bst_out>;
+ pwr_sw2-supply = <&bst_out>;
+
+ vddcore: buck1 {
+ regulator-name = "vddcore";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd_ddr: buck2 {
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd: buck3 {
+ regulator-name = "vdd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ st,mask-reset;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ v3v3: buck4 {
+ regulator-name = "v3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ regulator-initial-mode = <0>;
+ };
+
+ vdda: ldo1 {
+ regulator-name = "vdda";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ interrupts = <IT_CURLIM_LDO1 0>;
+ };
+
+ v2v9: ldo2 {
+ regulator-name = "v2v9";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-always-on;
+ interrupts = <IT_CURLIM_LDO2 0>;
+ };
+
+ vtt_ddr: ldo3 {
+ regulator-name = "vtt_ddr";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <750000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ vdd_usb: ldo4 {
+ regulator-name = "vdd_usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ interrupts = <IT_CURLIM_LDO4 0>;
+ };
+
+ vdd_sd: ldo5 {
+ regulator-name = "vdd_sd";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ interrupts = <IT_CURLIM_LDO5 0>;
+ regulator-boot-on;
+ };
+
+ v1v8: ldo6 {
+ regulator-name = "v1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ interrupts = <IT_CURLIM_LDO6 0>;
+ };
+
+ vref_ddr: vref_ddr {
+ regulator-name = "vref_ddr";
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ bst_out: boost {
+ regulator-name = "bst_out";
+ interrupts = <IT_OCP_BOOST 0>;
+ };
+
+ vbus_otg: pwr_sw1 {
+ regulator-name = "vbus_otg";
+ interrupts = <IT_OCP_OTG 0>;
+ regulator-active-discharge;
+ };
+
+ vbus_sw: pwr_sw2 {
+ regulator-name = "vbus_sw";
+ interrupts = <IT_OCP_SWOUT 0>;
+ regulator-active-discharge;
+ };
+ };
+
+ onkey {
+ compatible = "st,stpmic1-onkey";
+ interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
+ interrupt-names = "onkey-falling", "onkey-rising";
+ status = "okay";
+ };
+
+ watchdog {
+ compatible = "st,stpmic1-wdt";
+ status = "disabled";
+ };
+ };
+};
+
+&iwdg2 {
+ timeout-sec = <32>;
+ status = "okay";
+};
+
+&pwr_regulators {
+ vdd-supply = <&vdd>;
+ vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&rng1 {
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sdmmc1 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>;
+ pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_b>;
+ pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_b>;
+ broken-cd;
+ disable-wp;
+ st,sig-dir;
+ st,neg-edge;
+ st,use-ckin;
+ bus-width = <4>;
+ vmmc-supply = <&vdd_sd>;
+ vqmmc-supply = <&sd_switch>;
+ status = "okay";
+};
+
+/* LS-SPI0 */
+&spi4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi4_pins_a>;
+ cs-gpios = <&gpioe 11 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+/* BG96 */
+&usart2 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&usart2_pins_b>;
+ pinctrl-1 = <&usart2_sleep_pins_b>;
+ st,hw-flow-ctrl;
+ status = "okay";
+};
+
+/* LS-UART0 */
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_c>;
+ st,hw-flow-ctrl;
+ status = "okay";
+};
+
+/* Debug console */
+&uart7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart7_pins_b>;
+ status = "okay";
+};
+
+&usbh_ehci {
+ phys = <&usbphyc_port0>;
+ phy-names = "usb";
+ status = "okay";
+};
+
+&usbotg_hs {
+ dr_mode = "peripheral";
+ pinctrl-0 = <&usbotg_hs_pins_a>;
+ pinctrl-names = "default";
+ phy-names = "usb2-phy";
+ phys = <&usbphyc_port1 0>;
+ vbus-supply = <&vbus_otg>;
+ status = "okay";
+};
+
+&usbphyc {
+ status = "okay";
+};
+
+&usbphyc_port0 {
+ phy-supply = <&vdd_usb>;
+ vdda1v1-supply = <®11>;
+ vdda1v8-supply = <®18>;
+};
+
+&usbphyc_port1 {
+ phy-supply = <&vdd_usb>;
+ vdda1v1-supply = <®11>;
+ vdda1v8-supply = <®18>;
+};
--
2.17.1
From: Manivannan Sadhasivam <[email protected]>
IoT Box is an IoT gateway device based on Stinger96 board powered by
STM32MP1 SoC, designed and manufactured by Shiratech Solutions. This
device makes use of Stinger96 board by having it as a base board with
one additional mezzanine on top.
Following are the features exposed by this device in addition to the
Stinger96 board:
* WiFi/BT
* CCS811 VOC sensor
* 2x Digital microphones IM69D130
* 12x WS2812B LEDs
Following peripherals are tested and known to work:
* WiFi/BT
* CCS811
More information about this device can be found in Shiratech website:
https://www.shiratech-solutions.com/products/iot-box/
Signed-off-by: Manivannan Sadhasivam <[email protected]>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/stm32mp157a-iot-box.dts | 68 +++++++++++++++++++++++
2 files changed, 69 insertions(+)
create mode 100644 arch/arm/boot/dts/stm32mp157a-iot-box.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 966b81dfffd6..455ec6eb6303 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1030,6 +1030,7 @@ dtb-$(CONFIG_ARCH_STM32) += \
stm32h743i-disco.dtb \
stm32mp157a-avenger96.dtb \
stm32mp157a-dk1.dtb \
+ stm32mp157a-iot-box.dtb \
stm32mp157a-stinger96.dtb \
stm32mp157c-dhcom-pdk2.dtb \
stm32mp157c-dk2.dtb \
diff --git a/arch/arm/boot/dts/stm32mp157a-iot-box.dts b/arch/arm/boot/dts/stm32mp157a-iot-box.dts
new file mode 100644
index 000000000000..70f394b4d3c0
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-iot-box.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Manivannan Sadhasivam
+ */
+
+/dts-v1/;
+#include "stm32mp157a-stinger96.dtsi"
+
+/ {
+ model = "Shiratech STM32MP157A IoT Box";
+ compatible = "shiratech,stm32mp157a-iot-box", "st,stm32mp157";
+
+ wlan_pwr: regulator-wlan {
+ compatible = "regulator-fixed";
+
+ regulator-name = "wl-reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpiog 3 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&i2c2 {
+ ccs811@5b {
+ compatible = "ams,ccs811";
+ reg = <0x5b>;
+ wakeup-gpios = <&gpioa 12 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpioa 11 GPIO_ACTIVE_LOW>;
+ };
+};
+
+/* WiFi */
+&sdmmc2 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc2_b4_pins_a>;
+ pinctrl-1 = <&sdmmc2_b4_od_pins_b>;
+ pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>;
+ broken-cd;
+ non-removable;
+ st,neg-edge;
+ bus-width = <1>;
+ vmmc-supply = <&wlan_pwr>;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ brcmf: bcrmf@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
+};
+
+/* Bluetooth */
+&uart4 {
+ /* Note: HW flow control is broken, hence using custom CTS/RTS gpios */
+ /delete-property/st,hw-flow-ctrl;
+ cts-gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+ rts-gpios = <&gpiob 0 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ bluetooth {
+ shutdown-gpios = <&gpiog 2 GPIO_ACTIVE_HIGH>;
+ compatible = "brcm,bcm43438-bt";
+ max-speed = <115200>;
+ };
+};
--
2.17.1
From: Manivannan Sadhasivam <[email protected]>
Document devicetree compatible of Shiratech IoT Box.
Signed-off-by: Manivannan Sadhasivam <[email protected]>
---
Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
index 3849f1d0e03e..790e6dd48e34 100644
--- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
@@ -39,6 +39,7 @@ properties:
- enum:
- arrow,stm32mp157a-avenger96 # Avenger96
- lxa,stm32mp157c-mc1
+ - shiratech,stm32mp157a-iot-box # IoT Box
- shiratech,stm32mp157a-stinger96 # Stinger96
- st,stm32mp157c-ed1
- st,stm32mp157a-dk1
--
2.17.1
On Sun, 3 May 2020 21:12:10 +0530, wrote:
> From: Manivannan Sadhasivam <[email protected]>
>
> This commit adds devicetree vendor prefix for Shiratech solutions,
> a SOM/embedded board manufacturing company.
>
> https://www.shiratech-solutions.com/
>
> Signed-off-by: Manivannan Sadhasivam <[email protected]>
> ---
> Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
> 1 file changed, 2 insertions(+)
>
Acked-by: Rob Herring <[email protected]>
On Sun, 3 May 2020 21:12:12 +0530, wrote:
> From: Manivannan Sadhasivam <[email protected]>
>
> Document devicetree compatible of Shiratech Stinger96 board.
>
> Signed-off-by: Manivannan Sadhasivam <[email protected]>
> ---
> Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
Acked-by: Rob Herring <[email protected]>
On Sun, 3 May 2020 21:12:14 +0530, wrote:
> From: Manivannan Sadhasivam <[email protected]>
>
> Document devicetree compatible of Shiratech IoT Box.
>
> Signed-off-by: Manivannan Sadhasivam <[email protected]>
> ---
> Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
Acked-by: Rob Herring <[email protected]>
Hi Mani
On 5/3/20 5:42 PM, [email protected] wrote:
> From: Manivannan Sadhasivam <[email protected]>
>
> Hello,
>
> This series adds Stinger96 and IoT Box board support. These boards are
> based on STM32MP157A SoC, designed and manufactured by Shiratech solutions.
>
> The Stinger96 is a base board (96Boards IoT Extended edition) while IoT Box
> adds one mezzanine on top of it and sold as a gateway device.
>
> This series depends on below patchsets already submitted and gone through
> reviews:
>
> [PATCH v3 0/3] Add Reset and Wakeup support for CCS811
> [PATCH v3 0/2] Add CTS/RTS gpio support to STM32 UART
>
> More information about these boards can be found in below links:
>
> https://www.shiratech-solutions.com/products/stinger96/
> https://www.shiratech-solutions.com/products/iot-box/
>
> Thanks,
> Mani
>
Series applied on stm32-next.
Regards
Alex
> Changes in v2:
>
> * Used "stm32" prefix for all DT commits
> * Dropped custom sdmmc2 pinctrl node since existing node itself has pullup
> enabled and works fine.
>
> Manivannan Sadhasivam (6):
> dt-bindings: Add vendor prefix for Shiratech Solutions
> ARM: dts: stm32: Add missing pinctrl entries for STM32MP15
> dt-bindings: arm: stm32: Document Stinger96 compatible
> ARM: dts: stm32: Add Stinger96 board support
> dt-bindings: arm: stm32: Document IoT Box compatible
> ARM: dts: stm32: Add IoT Box board support
>
> .../devicetree/bindings/arm/stm32/stm32.yaml | 2 +
> .../devicetree/bindings/vendor-prefixes.yaml | 2 +
> arch/arm/boot/dts/Makefile | 2 +
> arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 64 ++++
> arch/arm/boot/dts/stm32mp157a-iot-box.dts | 68 ++++
> arch/arm/boot/dts/stm32mp157a-stinger96.dts | 12 +
> arch/arm/boot/dts/stm32mp157a-stinger96.dtsi | 342 ++++++++++++++++++
> 7 files changed, 492 insertions(+)
> create mode 100644 arch/arm/boot/dts/stm32mp157a-iot-box.dts
> create mode 100644 arch/arm/boot/dts/stm32mp157a-stinger96.dts
> create mode 100644 arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
>